| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140815093834.GC29442@amd.pavel.ucw.cz> Date: Fri, 15 Aug 2014 11:38:34 +0200 From: Pavel Machek <pavel@....cz> To: kernel list <linux-kernel@...r.kernel.org>, daniel.vetter@...ll.ch, jani-nikula@...ux.intel.com Subject: 3.17-rc0: cursor on pipe A assertion failure Hi! Today X session died on me (painful :-(). I got this in dmesg, not sure if it is related. Any ideas? Thanks, Pavel Initializing cgroup subsys cpu Linux version 3.16.0+ (pavel@duo) (gcc version 4.4.5 (Debian 4.4.5-8) ) #391 SMP Thu Aug 14 20:00:12 CEST 2014 Disabled fast string operations e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000007f6cffff] usable BIOS-e820: [mem 0x000000007f6d0000-0x000000007f6defff] ACPI data BIOS-e820: [mem 0x000000007f6df000-0x000000007f6fffff] ACPI NVS BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! SMBIOS 2.4 present. DMI: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011 ... ieee80211 phy0: wlan0: No probe response from AP 00:11:95:05:30:d7 after 500ms, disconnecting. cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:11:95:05:30:d7 wlan0: send auth to 00:11:95:05:30:d7 (try 1/3) wlan0: authenticated iwl3945 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP iwl3945 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP wlan0: associate with 00:11:95:05:30:d7 (try 1/3) wlan0: RX AssocResp from 00:11:95:05:30:d7 (capab=0x401 status=0 aid=5) wlan0: associated ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3169 at drivers/gpu/drm/i915/intel_display.c:1234 T.2633+0x9c/0xa0() cursor on pipe A assertion failure (expected off, current on) Modules linked in: CPU: 0 PID: 3169 Comm: Xorg Not tainted 3.16.0+ #391 Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011 000004d2 ddaddcac c482d33d c4aabe90 ddaddcdc c403926a c4aae20c ddaddd08 00000c61 c4aabe90 000004d2 c43cb9ec c43cb9ec f4fe0000 00000041 00000000 ddaddcf4 c403930e 00000009 ddaddcec c4aae20c ddaddd08 ddaddd1c c43cb9ec Call Trace: [<c482d33d>] dump_stack+0x41/0x52 [<c403926a>] warn_slowpath_common+0x7a/0xa0 [<c43cb9ec>] ? T.2633+0x9c/0xa0 [<c43cb9ec>] ? T.2633+0x9c/0xa0 [<c403930e>] warn_slowpath_fmt+0x2e/0x30 [<c43cb9ec>] T.2633+0x9c/0xa0 [<c43cbac8>] intel_enable_pipe+0x38/0x1c0 [<c43cc5ee>] i9xx_crtc_enable+0x36e/0x480 [<c43c2922>] intel_crtc_control+0xf2/0x100 [<c43c2986>] intel_crtc_update_dpms+0x56/0x70 [<c43dd4aa>] intel_crt_dpms+0x7a/0x90 [<c436da9d>] drm_mode_obj_set_property_ioctl+0x4ad/0x4e0 [<c436d113>] ? drm_modeset_unlock_all+0x43/0x60 [<c436db05>] drm_mode_connector_property_set_ioctl+0x35/0x50 [<c4362597>] drm_ioctl+0x267/0x540 [<c436dad0>] ? drm_mode_obj_set_property_ioctl+0x4e0/0x4e0 [<c40703ae>] ? __lock_acquire+0x3ae/0xc80 [<c4362330>] ? drm_getstats+0x60/0x60 [<c4106739>] do_vfs_ioctl+0x79/0x5d0 [<c4112cd7>] ? mntput_no_expire+0x57/0x1b0 [<c4112c80>] ? may_umount+0xa0/0xa0 [<c4112e49>] ? mntput+0x19/0x30 [<c40f83f2>] ? __fput+0x112/0x1b0 [<c4106cd7>] SyS_ioctl+0x47/0x70 [<c483225e>] syscall_call+0x7/0x7 ---[ end trace d7bbb3f10535eb0b ]--- i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] yenta_cardbus 0000:15:00.0: bridge window [io 0x9000-0x90ff] yenta_cardbus 0000:15:00.0: bridge window [io 0x9400-0x94ff] yenta_cardbus 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref] yenta_cardbus 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform e1000e 0000:02:00.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform iwl3945 0000:03:00.0: no hotplug settings from platform pcieport 0000:00:1c.2: no hotplug settings from platform pcieport 0000:00:1c.3: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:15:00.1: no hotplug settings from platform pci 0000:15:00.1: using default PCI settings sdhci-pci 0000:15:00.2: no hotplug settings from platform sdhci-pci 0000:15:00.2: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ahci 0000:00:1f.2: no hotplug settings from platform ahci 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment yenta_cardbus 0000:15:00.0: CardBus bridge to [bus 16-17] yenta_cardbus 0000:15:00.0: bridge window [io 0x9000-0x90ff] yenta_cardbus 0000:15:00.0: bridge window [io 0x9400-0x94ff] yenta_cardbus 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref] yenta_cardbus 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform e1000e 0000:02:00.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform iwl3945 0000:03:00.0: no hotplug settings from platform pcieport 0000:00:1c.2: no hotplug settings from platform pcieport 0000:00:1c.3: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:15:00.1: no hotplug settings from platform pci 0000:15:00.1: using default PCI settings sdhci-pci 0000:15:00.2: no hotplug settings from platform sdhci-pci 0000:15:00.2: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ahci 0000:00:1f.2: no hotplug settings from platform ahci 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings pci_bus 0000:02: Allocating resources pci_bus 0000:03: Allocating resources pci_bus 0000:04: Allocating resources pci_bus 0000:0c: Allocating resources i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists