[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANLsYkxCdVm6cPtM9ub3Vwc24G9x6Vy9pt5pVMSPMxcksw6VHA@mail.gmail.com>
Date: Mon, 25 Aug 2014 08:02:43 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Marcin Jabrzyk <marcin.jabrzyk@...il.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Will Deacon <will.deacon@....com>,
Russell King - ARM Linux <linux@....linux.org.uk>,
00regkh@...uxfoundation.org, Pratik Patel <pratikp@...eaurora.org>,
Vikas Varshney <varshney@...com>, Al Grant <Al.Grant@....com>,
Jonas Svennebring <jonas.svennebring@...gotech.com>,
James King <james.king@...aro.org>,
Panchaxari Prasannamurthy Tumkur
<panchaxari.prasannamurthy@...aro.org>,
Kaixu Xia <kaixu.xia@...aro.org>,
"r.sengupta@...sung.com" <r.sengupta@...sung.com>,
Robert Marklund <robbelibobban@...il.com>,
Tony Armitstead <Tony.Armitstead@....com>,
Daniel Thompson <daniel.thompson@...aro.org>,
Patch Tracking <patches@...aro.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 09/11 v4] coresight: adding support for beagle and beagleXM
On 24 August 2014 15:38, Marcin Jabrzyk <marcin.jabrzyk@...il.com> wrote:
> Hi,
>
> W dniu 20.08.2014 o 19:03, mathieu.poirier@...aro.org pisze:
>> From: Mathieu Poirier <mathieu.poirier@...aro.org>
>>
>> Currently supporting ETM and ETB. Support for TPIU
>> and SDTI are yet to be added.
> Did you tried running the drivers on board or are there any special
> preparation needed?
> I've BeagleBoard-xM Rev. C applied your patches and enabled the
> functions the in menuconfig.
> But on dmesg I see that:
>
> [ 0.685028] of_amba_device_create(): amba_device_add() failed (-19)
> for /etb@...1b000
> [ 0.685119] of_amba_device_create(): amba_device_add() failed (-19)
> for /etm@...10000
>
> There are no nodes according coresight in /sys/kernel/debug/ .
Right, that is because there is a problem in mainline with enabling
"emu_src_ck". The call to "clk_prepare_enable()" returns without
waiting for the clock to effectively be enabled, preventing the
components from being discovered properly.
The work around (non-upstreamable) is to have a driver getting a hold
of the clock before AMBA devices are probed. I can send you that code
(10 lines) if need be.
>
> Best regards,
> Marcin
>
>>
>> Signed-off-by: Mathieu Poirier <mathieu.poirier@...aro.org>
>> ---
>> arch/arm/boot/dts/omap3-beagle-xm.dts | 28 ++++++++++++++++++++++++++++
>> arch/arm/boot/dts/omap3-beagle.dts | 28 ++++++++++++++++++++++++++++
>> 2 files changed, 56 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
>> index 1becefc..eec73d8 100644
>> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
>> @@ -145,6 +145,34 @@
>> };
>> };
>> };
>> +
>> + etb@...1b000 {
>> + compatible = "arm,coresight-etb10", "arm,primecell";
>> + reg = <0x5401b000 0x1000>;
>> +
>> + coresight-default-sink;
>> + clocks = <&emu_src_ck>;
>> + clock-names = "apb_pclk";
>> + port {
>> + etb_in: endpoint {
>> + slave-mode;
>> + remote-endpoint = <&etm_out>;
>> + };
>> + };
>> + };
>> +
>> + etm@...10000 {
>> + compatible = "arm,coresight-etm3x", "arm,primecell";
>> + reg = <0x54010000 0x1000>;
>> +
>> + clocks = <&emu_src_ck>;
>> + clock-names = "apb_pclk";
>> + port {
>> + etm_out: endpoint {
>> + remote-endpoint = <&etb_in>;
>> + };
>> + };
>> + };
>> };
>>
>> &omap3_pmx_wkup {
>> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
>> index 3c3e6da..a151daf 100644
>> --- a/arch/arm/boot/dts/omap3-beagle.dts
>> +++ b/arch/arm/boot/dts/omap3-beagle.dts
>> @@ -140,6 +140,34 @@
>> };
>> };
>> };
>> +
>> + etb@...000000 {
>> + compatible = "arm,coresight-etb10", "arm,primecell";
>> + reg = <0x5401b000 0x1000>;
>> +
>> + coresight-default-sink;
>> + clocks = <&emu_src_ck>;
>> + clock-names = "apb_pclk";
>> + port {
>> + etb_in: endpoint {
>> + slave-mode;
>> + remote-endpoint = <&etm_out>;
>> + };
>> + };
>> + };
>> +
>> + etm@...10000 {
>> + compatible = "arm,coresight-etm3x", "arm,primecell";
>> + reg = <0x54010000 0x1000>;
>> +
>> + clocks = <&emu_src_ck>;
>> + clock-names = "apb_pclk";
>> + port {
>> + etm_out: endpoint {
>> + remote-endpoint = <&etb_in>;
>> + };
>> + };
>> + };
>> };
>>
>> &omap3_pmx_wkup {
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists