| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1409188672.8085.26.camel@rzhang1-toshiba>
Date: Thu, 28 Aug 2014 09:17:52 +0800
From: Zhang Rui <rui.zhang@...el.com>
To: Peter Feuerer <peter@...e.net>
Cc: LKML <linux-kernel@...r.kernel.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Andreas Mohr <andi@...as.de>, Javi Merino <javi.merino@....com>
Subject: Re: [PATCH v5 4/6] acerhdf: Use bang-bang thermal governor
On Wed, 2014-08-27 at 10:01 +0200, Peter Feuerer wrote:
> Zhang Rui writes:
>
> > On Tue, 2014-07-22 at 17:37 +0200, Peter Feuerer wrote:
> >> acerhdf has been doing an on-off fan control using hysteresis by
> >> post-manipulating the outcome of thermal subsystem trip point handling.
> >> This patch enables acerhdf to use the bang-bang governor, which is
> >> intended for on-off controlled fans.
> >>
> >> Cc: Andrew Morton <akpm@...ux-foundation.org>
> >> CC: Zhang Rui <rui.zhang@...el.com>
> >> Cc: Andreas Mohr <andi@...as.de>
> >> Cc: Javi Merino <javi.merino@....com>
> >> Acked-and-tested-by: Borislav Petkov <bp@...e.de>
> >> Signed-off-by: Peter Feuerer <peter@...e.net>
> >
> > Peter,
> >
> > will you take this patch, or do you want me to take this patch along
> > with Patch 3/6?
>
> Hi Rui,
>
> please apply the whole series. I don't have a git repository where Linus
> pulls from.
>
No, I can not apply the whole series.
I should take patch 3/6, and the others should goto Matthew Garrett'
tree. Or I can take them with Matthew' Acked-by.
thanks,
rui
> thanks and kind regards,
> --peter;
>
>
> >
> > thanks,
> > rui
> >> ---
> >> drivers/platform/x86/Kconfig | 3 ++-
> >> drivers/platform/x86/acerhdf.c | 36 +++++++++++++++++++++++++++++++-----
> >> 2 files changed, 33 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> >> index 172f26c..b5e80dc 100644
> >> --- a/drivers/platform/x86/Kconfig
> >> +++ b/drivers/platform/x86/Kconfig
> >> @@ -38,7 +38,8 @@ config ACER_WMI
> >>
> >> config ACERHDF
> >> tristate "Acer Aspire One temperature and fan driver"
> >> - depends on THERMAL && ACPI
> >> + select THERMAL_GOV_BANG_BANG
> >> + depends on ACPI
> >> ---help---
> >> This is a driver for Acer Aspire One netbooks. It allows to access
> >> the temperature sensor and to control the fan.
> >> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
> >> index f30767f..7fe7dbf 100644
> >> --- a/drivers/platform/x86/acerhdf.c
> >> +++ b/drivers/platform/x86/acerhdf.c
> >> @@ -50,7 +50,7 @@
> >> */
> >> #undef START_IN_KERNEL_MODE
> >>
> >> -#define DRV_VER "0.5.30"
> >> +#define DRV_VER "0.7.0"
> >>
> >> /*
> >> * According to the Atom N270 datasheet,
> >> @@ -258,6 +258,14 @@ static const struct bios_settings_t bios_tbl[] = {
> >>
> >> static const struct bios_settings_t *bios_cfg __read_mostly;
> >>
> >> +/*
> >> + * this struct is used to instruct thermal layer to use bang_bang instead of
> >> + * default governor for acerhdf
> >> + */
> >> +static struct thermal_zone_params acerhdf_zone_params = {
> >> + .governor_name = "bang_bang",
> >> +};
> >> +
> >> static int acerhdf_get_temp(int *temp)
> >> {
> >> u8 read_temp;
> >> @@ -439,6 +447,17 @@ static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
> >> return 0;
> >> }
> >>
> >> +static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
> >> + unsigned long *temp)
> >> +{
> >> + if (trip != 0)
> >> + return -EINVAL;
> >> +
> >> + *temp = fanon - fanoff;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> >> unsigned long *temp)
> >> {
> >> @@ -463,6 +482,7 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
> >> .get_mode = acerhdf_get_mode,
> >> .set_mode = acerhdf_set_mode,
> >> .get_trip_type = acerhdf_get_trip_type,
> >> + .get_trip_hyst = acerhdf_get_trip_hyst,
> >> .get_trip_temp = acerhdf_get_trip_temp,
> >> .get_crit_temp = acerhdf_get_crit_temp,
> >> };
> >> @@ -515,9 +535,7 @@ static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
> >> }
> >>
> >> if (state == 0) {
> >> - /* turn fan off only if below fanoff temperature */
> >> - if ((cur_state == ACERHDF_FAN_AUTO) &&
> >> - (cur_temp < fanoff))
> >> + if (cur_state == ACERHDF_FAN_AUTO)
> >> acerhdf_change_fanstate(ACERHDF_FAN_OFF);
> >> } else {
> >> if (cur_state == ACERHDF_FAN_OFF)
> >> @@ -696,11 +714,19 @@ static int acerhdf_register_thermal(void)
> >> return -EINVAL;
> >>
> >> thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
> >> - &acerhdf_dev_ops, NULL, 0,
> >> + &acerhdf_dev_ops,
> >> + &acerhdf_zone_params, 0,
> >> (kernelmode) ? interval*1000 : 0);
> >> if (IS_ERR(thz_dev))
> >> return -EINVAL;
> >>
> >> + if (strcmp(thz_dev->governor->name,
> >> + acerhdf_zone_params.governor_name)) {
> >> + pr_err("Didn't get thermal governor %s, perhaps not compiled into thermal subsystem.\n",
> >> + acerhdf_zone_params.governor_name);
> >> + return -EINVAL;
> >> + }
> >> +
> >> return 0;
> >> }
> >>
> >
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists