linux-kernel - [PATCH 4/5] clk: at91: rework rm9200 USB clock to propagate set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1409644218-13677-5-git-send-email-boris.brezillon@free-electrons.com>
Date:	Tue,  2 Sep 2014 09:50:17 +0200
From:	Boris BREZILLON <boris.brezillon@...e-electrons.com>
To:	Nicolas Ferre <nicolas.ferre@...el.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	Andrew Victor <linux@...im.org.za>,
	Mike Turquette <mturquette@...aro.org>
Cc:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Gaël PORTAY <gael.portay@...il.com>,
	Boris BREZILLON <boris.brezillon@...e-electrons.com>
Subject: [PATCH 4/5] clk: at91: rework rm9200 USB clock to propagate set_rate to the parent clk

The RM9200 USB clock is actually connected to a single parent (the PLLB)
on which we can apply a specific divider.
The USB clock divider does not allow for fine grained control on the USB
clock frequency, hence propagating the set_rate request to the parent is
the only choice we have to properly configure the USB clock rate.

Signed-off-by: Boris BREZILLON <boris.brezillon@...e-electrons.com>
Reported-by: Gaël PORTAY <gael.portay@...il.com>
---
 drivers/clk/at91/clk-usb.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index 7d1d26a..1838777 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -238,16 +238,22 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
 					  unsigned long *parent_rate)
 {
 	struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw);
+	struct clk *parent = __clk_get_parent(hw->clk);
 	unsigned long bestrate = 0;
 	int bestdiff = -1;
 	unsigned long tmprate;
 	int tmpdiff;
 	int i = 0;
 
-	for (i = 0; i < 4; i++) {
+	for (i = 0; i < RM9200_USB_DIV_TAB_SIZE; i++) {
+		unsigned long tmp_parent_rate;
+
 		if (!usb->divisors[i])
 			continue;
-		tmprate = *parent_rate / usb->divisors[i];
+
+		tmp_parent_rate = rate * usb->divisors[i];
+		tmp_parent_rate = __clk_round_rate(parent, tmp_parent_rate);
+		tmprate = tmp_parent_rate / usb->divisors[i];
 		if (tmprate < rate)
 			tmpdiff = rate - tmprate;
 		else
@@ -256,6 +262,7 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
 		if (bestdiff < 0 || bestdiff > tmpdiff) {
 			bestrate = tmprate;
 			bestdiff = tmpdiff;
+			*parent_rate = tmp_parent_rate;
 		}
 
 		if (!bestdiff)
@@ -311,7 +318,7 @@ at91rm9200_clk_register_usb(struct at91_pmc *pmc, const char *name,
 	init.ops = &at91rm9200_usb_ops;
 	init.parent_names = &parent_name;
 	init.num_parents = 1;
-	init.flags = 0;
+	init.flags = CLK_SET_RATE_PARENT;
 
 	usb->hw.init = &init;
 	usb->pmc = pmc;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/