[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAAObsKA61Ano85P6PehOY7WqR0FgTz_Rfur8UAt56ZXoNyoyqQ@mail.gmail.com>
Date: Thu, 18 Sep 2014 11:27:45 +0200
From: Tomeu Vizoso <tomeu@...euvizoso.net>
To: Caesar Wang <caesar.wang@...k-chips.com>
Cc: heiko@...ech.de, rui.zhang@...el.com, edubezval@...il.com,
Arnd Bergmann <arnd@...db.de>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
linux-pm@...r.kernel.org,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
linux-doc@...r.kernel.org, huangtao@...k-chips.com,
cf@...k-chips.com, dianders@...omium.org, dtor@...omium.org,
dmitry.torokhov@...il.com, addy.ke@...k-chips.com,
zyf@...k-chips.com, cjf@...k-chips.com
Subject: Re: [PATCH v5 2/4] dt-bindings: document Rockchip thermal
On 17 September 2014 05:59, Caesar Wang <caesar.wang@...k-chips.com> wrote:
> This add the necessary binding documentation for the thermal
> found on Rockchip SoCs
Hi Caesar,
is there any reason to not use the existing thermal bindings? You can
find a description in
Documentation/devicetree/bindings/thermal/thermal.txt and example code
in omap, or in the patches for Tegra recently posted by Mikko
Perttunen.
Regards,
Tomeu
> Signed-off-by: zhaoyifeng <zyf@...k-chips.com>
> Signed-off-by: Caesar Wang <caesar.wang@...k-chips.com>
> ---
> .../bindings/thermal/rockchip-thermal.txt | 41 ++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
>
> diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> new file mode 100644
> index 0000000..6fc8bc3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> @@ -0,0 +1,41 @@
> +* Temperature Sensor ADC (TSADC) on rockchip SoCs
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-tsadc"
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- interrupts: The interrupt number to the cpu. The interrupt specifier format
> + depends on the interrupt controller.
> +- clocks: Must contain an entry for each entry in clock-names.
> +- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for
> + the peripheral clock.
> +- num-trips: number of total trip points, this is required, set it 0 if none,
> + if greater than 0, the following properties must be defined;
> +- tripN-temp: temperature of trip point N, should be in ascending order;
> +- tripN-type: type of trip point N, should be one of "active" "passive" "hot"
> + "critical";
> +- tripN-cdev-num: number of the cooling devices which can be bound to trip
> + point N, this is required if trip point N is defined, set it 0 if none,
> + otherwise the following cooling device names must be defined;
> +- tripN-cdev-nameM: name of the No. M cooling device of trip point N;
> +
> +Example:
> +tsadc: tsadc@...80000 {
> + compatible = "rockchip,rk3288-tsadc";
> + reg = <0xff280000 0x100>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
> + clock-names = "tsadc", "apb_pclk";
> +
> + num-trips = <2>;
> +
> + trip0-temp = <80>;
> + trip0-type = "passive";
> + trip0-cdev-num = <1>;
> + trip0-cdev-name0 = "thermal-cpufreq-0";
> +
> + trip1-temp = <100>;
> + trip1-type = "critical";
> + trip1-cdev-num = <1>;
> + trip1-cdev-name0 = "thermal-cpufreq-0";
> +};
> --
> 1.9.1
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists