| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BAY176-DS13F77F70E0A4210C2CC54BDB40@phx.gbl>
Date: Fri, 19 Sep 2014 09:47:05 +0800
From: Dudley Du <dudlx@...look.com>
To: <dmitry.torokhov@...il.com>, <rydberg@...omail.se>
CC: <bleung@...gle.com>, <patrikf@...gle.com>,
<linux-input@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v7 08/13] input: cyapa: add gen3 trackpad device baseline and calibrate functions support
Add report baseline and force calibrate functions supported for gen3
trackpad device, which these functions are supplied through
cyapa core baseline and calibrate interfaces.
TEST=test on Chromebooks.
Signed-off-by: Dudley Du <dudl@...ress.com>
---
drivers/input/mouse/cyapa_gen3.c | 135 +++++++++++++++++++++++++++++++++++++++
1 file changed, 135 insertions(+)
diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c
index 5c8ee57..6a0e67a 100644
--- a/drivers/input/mouse/cyapa_gen3.c
+++ b/drivers/input/mouse/cyapa_gen3.c
@@ -756,6 +756,138 @@ static int cyapa_gen3_do_fw_update(struct cyapa *cyapa,
return 0;
}
+static ssize_t cyapa_gen3_do_calibrate(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int tries = 20; /* max recalibration timeout 2s. */
+ int ret;
+
+ data_reporting_started = false;
+
+ ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
+ if (ret < 0) {
+ dev_err(dev, "Error reading dev status. err = %d\n", ret);
+ goto out;
+ }
+ if ((ret & CYAPA_DEV_NORMAL) != CYAPA_DEV_NORMAL) {
+ dev_warn(dev, "Trackpad device is busy. device state = 0x%x\n",
+ ret);
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ ret = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET,
+ OP_RECALIBRATION_MASK);
+ if (ret < 0) {
+ dev_err(dev, "Failed to send calibrate command. ret = %d\n",
+ ret);
+ goto out;
+ }
+
+ do {
+ /*
+ * For this recalibration, the max time will not exceed 2s.
+ * The average time is approximately 500 - 700 ms, and we
+ * will check the status every 100 - 200ms.
+ */
+ usleep_range(100000, 200000);
+
+ ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
+ if (ret < 0) {
+ dev_err(dev, "Error reading dev status. err = %d\n",
+ ret);
+ goto out;
+ }
+ if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL)
+ break;
+ } while (--tries);
+
+ if (tries == 0) {
+ dev_err(dev, "Failed to calibrate. Timeout.\n");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+ dev_dbg(dev, "Calibration successful.\n");
+
+out:
+ data_reporting_started = true;
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t cyapa_gen3_show_baseline(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cyapa *cyapa = dev_get_drvdata(dev);
+ int max_baseline, min_baseline;
+ int tries = 3;
+ int ret;
+
+ data_reporting_started = false;
+
+ ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
+ if (ret < 0) {
+ dev_err(dev, "Error reading dev status. err = %d\n", ret);
+ goto out;
+ }
+ if ((ret & CYAPA_DEV_NORMAL) != CYAPA_DEV_NORMAL) {
+ dev_warn(dev, "Trackpad device is busy. device state = 0x%x\n",
+ ret);
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ ret = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET,
+ OP_REPORT_BASELINE_MASK);
+ if (ret < 0) {
+ dev_err(dev, "Failed to send report baseline command. %d\n",
+ ret);
+ goto out;
+ }
+
+ do {
+ usleep_range(10000, 20000);
+
+ ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
+ if (ret < 0) {
+ dev_err(dev, "Error reading dev status. err = %d\n",
+ ret);
+ goto out;
+ }
+ if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL)
+ break;
+ } while (--tries);
+
+ if (tries == 0) {
+ dev_err(dev, "Device timed out going to Normal state.\n");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ ret = cyapa_read_byte(cyapa, CYAPA_CMD_MAX_BASELINE);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read max baseline. err = %d\n", ret);
+ goto out;
+ }
+ max_baseline = ret;
+
+ ret = cyapa_read_byte(cyapa, CYAPA_CMD_MIN_BASELINE);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read min baseline. err = %d\n", ret);
+ goto out;
+ }
+ min_baseline = ret;
+
+ dev_dbg(dev, "Baseline report successful. Max: %d Min: %d\n",
+ max_baseline, min_baseline);
+ ret = scnprintf(buf, PAGE_SIZE, "%d %d\n", max_baseline, min_baseline);
+
+out:
+ data_reporting_started = true;
+ return ret;
+}
+
/*
* cyapa_get_wait_time_for_pwr_cmd
*
@@ -1067,6 +1199,9 @@ const struct cyapa_dev_ops cyapa_gen3_ops = {
.update_fw = cyapa_gen3_do_fw_update,
.bl_deactivate = cyapa_gen3_bl_deactivate,
+ .show_baseline = cyapa_gen3_show_baseline,
+ .calibrate_store = cyapa_gen3_do_calibrate,
+
.state_parse = cyapa_gen3_state_parse,
.operational_check = cyapa_gen3_do_operational_check,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists