| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <543514FF.8070504@atmel.com>
Date: Wed, 8 Oct 2014 12:42:07 +0200
From: Nicolas Ferre <nicolas.ferre@...el.com>
To: Boris Brezillon <boris.brezillon@...e-electrons.com>,
David Airlie <airlied@...ux.ie>,
<dri-devel@...ts.freedesktop.org>,
"Jean-Christophe Plagniol-Villard" <plagnioj@...osoft.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Andrew Victor <linux@...im.org.za>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>,
Thierry Reding <thierry.reding@...il.com>,
<linux-pwm@...r.kernel.org>, "Rob Clark" <robdclark@...il.com>
CC: <linux-arm-kernel@...ts.infradead.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
"Ian Campbell" <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Mark Yao <mark.yao@...k-chips.com>
Subject: Re: [PATCH v7 05/11] drm: add Atmel HLCDC Display Controller support
On 01/10/2014 16:53, Boris Brezillon :
> From: Boris BREZILLON <boris.brezillon@...e-electrons.com>
>
> The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e.
> at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display
> controller device.
>
> This display controller supports at least one primary plane and might
> provide several overlays and an hardware cursor depending on the IP
> version.
>
> At the moment, this driver only implements an RGB connector to interface
> with LCD panels, but support for other kind of external devices might be
> added later.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
> Reviewed-by: Rob Clark <robdclark@...il.com>
> Tested-by: Anthony Harivel <anthony.harivel@...rion.de>
> Tested-by: Ludovic Desroches <ludovic.desroches@...el.com>
> ---
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/atmel-hlcdc/Kconfig | 13 +
> drivers/gpu/drm/atmel-hlcdc/Makefile | 7 +
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 390 +++++++++++
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 531 +++++++++++++++
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 216 ++++++
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c | 638 +++++++++++++++++
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h | 394 +++++++++++
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 443 ++++++++++++
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 831 +++++++++++++++++++++++
> 11 files changed, 3466 insertions(+)
> create mode 100644 drivers/gpu/drm/atmel-hlcdc/Kconfig
> create mode 100644 drivers/gpu/drm/atmel-hlcdc/Makefile
> create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
> create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h
> create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
> create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index b066bb3..2d97f7e 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -185,6 +185,8 @@ source "drivers/gpu/drm/cirrus/Kconfig"
>
> source "drivers/gpu/drm/armada/Kconfig"
>
> +source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
> +
> source "drivers/gpu/drm/rcar-du/Kconfig"
>
> source "drivers/gpu/drm/shmobile/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 4a55d59..abb4f29 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -56,6 +56,7 @@ obj-$(CONFIG_DRM_GMA500) += gma500/
> obj-$(CONFIG_DRM_UDL) += udl/
> obj-$(CONFIG_DRM_AST) += ast/
> obj-$(CONFIG_DRM_ARMADA) += armada/
> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
> obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
> obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
> obj-$(CONFIG_DRM_OMAP) += omapdrm/
> diff --git a/drivers/gpu/drm/atmel-hlcdc/Kconfig b/drivers/gpu/drm/atmel-hlcdc/Kconfig
> new file mode 100644
> index 0000000..942407f
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel-hlcdc/Kconfig
> @@ -0,0 +1,13 @@
> +config DRM_ATMEL_HLCDC
> + tristate "DRM Support for ATMEL HLCDC Display Controller"
> + depends on DRM && OF && COMMON_CLK
> + select DRM_GEM_CMA_HELPER
> + select DRM_KMS_HELPER
> + select DRM_KMS_FB_HELPER
> + select DRM_KMS_CMA_HELPER
> + select DRM_PANEL
> + select MFD_ATMEL_HLCDC
> + depends on OF
> + help
> + Choose this option if you have an ATMEL SoC with an HLCDC display
> + controller (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family).
> diff --git a/drivers/gpu/drm/atmel-hlcdc/Makefile b/drivers/gpu/drm/atmel-hlcdc/Makefile
> new file mode 100644
> index 0000000..10ae426
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel-hlcdc/Makefile
> @@ -0,0 +1,7 @@
> +atmel-hlcdc-dc-y := atmel_hlcdc_crtc.o \
> + atmel_hlcdc_dc.o \
> + atmel_hlcdc_layer.o \
> + atmel_hlcdc_output.o \
> + atmel_hlcdc_plane.o
> +
> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc-dc.o
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> new file mode 100644
> index 0000000..02f7a98
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -0,0 +1,390 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + * Copyright (C) 2014 Free Electrons
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@...phandler.com>
> + * Author: Boris BREZILLON <boris.brezillon@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
> +
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drmP.h>
> +
> +#include <video/videomode.h>
> +
> +#include "atmel_hlcdc_dc.h"
> +
> +/**
> + * Atmel HLCDC CRTC structure
> + *
> + * @base: base DRM CRTC structure
> + * @hlcdc: pointer to the atmel_hlcdc structure provided by the MFD device
isn't it dc here ^^^
> + * @event: pointer to the current page flip event
> + * @id: CRTC id (returned by drm_crtc_index)
> + * @dpms: DPMS mode
> + */
> +struct atmel_hlcdc_crtc {
> + struct drm_crtc base;
> + struct atmel_hlcdc_dc *dc;
> + struct drm_pending_vblank_event *event;
> + int id;
> + int dpms;
> +};
> +
> +static inline struct atmel_hlcdc_crtc *
> +drm_crtc_to_atmel_hlcdc_crtc(struct drm_crtc *crtc)
> +{
> + return container_of(crtc, struct atmel_hlcdc_crtc, base);
> +}
> +
> +static void atmel_hlcdc_crtc_dpms(struct drm_crtc *c, int mode)
> +{
> + struct drm_device *dev = c->dev;
> + struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(c);
> + struct regmap *regmap = crtc->dc->hlcdc->regmap;
> + unsigned int status;
> +
> + if (mode != DRM_MODE_DPMS_ON)
> + mode = DRM_MODE_DPMS_OFF;
> +
> + if (crtc->dpms == mode)
> + return;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + if (mode != DRM_MODE_DPMS_ON) {
> + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP);
> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
> + (status & ATMEL_HLCDC_DISP))
> + cpu_relax();
> +
> + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_SYNC);
> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
> + (status & ATMEL_HLCDC_SYNC))
> + cpu_relax();
> +
> + regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_PIXEL_CLK);
> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
> + (status & ATMEL_HLCDC_PIXEL_CLK))
> + cpu_relax();
> +
> + clk_disable_unprepare(crtc->dc->hlcdc->sys_clk);
> +
> + pm_runtime_allow(dev->dev);
> + } else {
> + pm_runtime_forbid(dev->dev);
> +
> + clk_prepare_enable(crtc->dc->hlcdc->sys_clk);
> +
> + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_PIXEL_CLK);
> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
> + !(status & ATMEL_HLCDC_PIXEL_CLK))
> + cpu_relax();
> +
> +
> + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_SYNC);
> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
> + !(status & ATMEL_HLCDC_SYNC))
> + cpu_relax();
> +
> + regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_DISP);
> + while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
> + !(status & ATMEL_HLCDC_DISP))
> + cpu_relax();
> + }
> +
> + pm_runtime_put_sync(dev->dev);
> +
> + crtc->dpms = mode;
> +}
> +
> +static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *c,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adj,
> + int x, int y,
> + struct drm_framebuffer *old_fb)
> +{
> + struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(c);
> + struct regmap *regmap = crtc->dc->hlcdc->regmap;
> + struct drm_plane *plane = c->primary;
> + struct drm_framebuffer *fb;
> + unsigned long mode_rate;
> + struct videomode vm;
> + unsigned long prate;
> + unsigned int cfg;
> + int div;
> +
> + if (atmel_hlcdc_dc_mode_valid(crtc->dc, adj) != MODE_OK)
> + return -EINVAL;
> +
> + vm.vfront_porch = adj->vsync_start - adj->vdisplay;
> + vm.vback_porch = adj->vtotal - adj->vsync_end;
> + vm.vsync_len = adj->vsync_end - adj->vsync_start;
> + vm.hfront_porch = adj->hsync_start - adj->hdisplay;
> + vm.hback_porch = adj->htotal - adj->hsync_end;
> + vm.hsync_len = adj->hsync_end - adj->hsync_start;
> +
> + regmap_write(regmap, ATMEL_HLCDC_CFG(1),
> + (vm.hsync_len - 1) | ((vm.vsync_len - 1) << 16));
> +
> + regmap_write(regmap, ATMEL_HLCDC_CFG(2),
> + (vm.vfront_porch - 1) | (vm.vback_porch << 16));
> +
> + regmap_write(regmap, ATMEL_HLCDC_CFG(3),
> + (vm.hfront_porch - 1) | ((vm.hback_porch - 1) << 16));
> +
> + regmap_write(regmap, ATMEL_HLCDC_CFG(4),
> + (adj->hdisplay - 1) | ((adj->vdisplay - 1) << 16));
> +
> + cfg = ATMEL_HLCDC_CLKPOL;
> +
> + prate = clk_get_rate(crtc->dc->hlcdc->sys_clk);
> + mode_rate = mode->clock * 1000;
> + if ((prate / 2) < mode_rate) {
> + prate *= 2;
> + cfg |= ATMEL_HLCDC_CLKSEL;
> + }
> +
> + div = DIV_ROUND_UP(prate, mode_rate);
> + if (div < 2)
> + div = 2;
> +
> + cfg |= ATMEL_HLCDC_CLKDIV(div);
> +
> + regmap_update_bits(regmap, ATMEL_HLCDC_CFG(0),
> + ATMEL_HLCDC_CLKSEL | ATMEL_HLCDC_CLKDIV_MASK |
> + ATMEL_HLCDC_CLKPOL, cfg);
> +
> + cfg = 0;
> +
> + if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> + cfg |= ATMEL_HLCDC_VSPOL;
> +
> + if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> + cfg |= ATMEL_HLCDC_HSPOL;
> +
> + regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5),
> + ATMEL_HLCDC_HSPOL | ATMEL_HLCDC_VSPOL |
> + ATMEL_HLCDC_VSPDLYS | ATMEL_HLCDC_VSPDLYE |
> + ATMEL_HLCDC_DISPPOL | ATMEL_HLCDC_DISPDLY |
> + ATMEL_HLCDC_VSPSU | ATMEL_HLCDC_VSPHO |
> + ATMEL_HLCDC_GUARDTIME_MASK,
> + cfg);
> +
> + fb = plane->fb;
> + plane->fb = old_fb;
> +
> + return plane->funcs->update_plane(plane, c, fb,
> + 0, 0,
> + adj->hdisplay, adj->vdisplay,
> + x << 16, y << 16,
> + adj->hdisplay << 16,
> + adj->vdisplay << 16);
> +}
> +
> +int atmel_hlcdc_crtc_mode_set_base(struct drm_crtc *c, int x, int y,
> + struct drm_framebuffer *old_fb)
> +{
> + struct drm_plane *plane = c->primary;
> + struct drm_framebuffer *fb = plane->fb;
> + struct drm_display_mode *mode = &c->hwmode;
> +
> + plane->fb = old_fb;
> +
> + return plane->funcs->update_plane(plane, c, fb,
> + 0, 0,
> + mode->hdisplay, mode->vdisplay,
> + x << 16, y << 16,
> + mode->hdisplay << 16,
> + mode->vdisplay << 16);
> +}
> +
> +static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +}
> +
> +static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
> +}
> +
> +static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
> + const struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + return true;
> +}
> +
> +
> +static const struct drm_crtc_helper_funcs lcdc_crtc_helper_funcs = {
> +
> + .mode_fixup = atmel_hlcdc_crtc_mode_fixup,
> + .dpms = atmel_hlcdc_crtc_dpms,
> + .mode_set = atmel_hlcdc_crtc_mode_set,
> + .mode_set_base = atmel_hlcdc_crtc_mode_set_base,
> + .prepare = atmel_hlcdc_crtc_prepare,
> + .commit = atmel_hlcdc_crtc_commit,
> +};
> +
> +static void atmel_hlcdc_crtc_destroy(struct drm_crtc *c)
> +{
> + struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(c);
> +
> + drm_crtc_cleanup(c);
> + kfree(crtc);
> +}
> +
> +void atmel_hlcdc_crtc_cancel_page_flip(struct drm_crtc *c,
> + struct drm_file *file)
> +{
> + struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(c);
> + struct drm_pending_vblank_event *event;
> + struct drm_device *dev = c->dev;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&dev->event_lock, flags);
> + event = crtc->event;
> + if (event && event->base.file_priv == file) {
> + event->base.destroy(&event->base);
> + drm_vblank_put(dev, crtc->id);
> + crtc->event = NULL;
> + }
> + spin_unlock_irqrestore(&dev->event_lock, flags);
> +}
> +
> +static void atmel_hlcdc_crtc_finish_page_flip(struct atmel_hlcdc_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->base.dev;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&dev->event_lock, flags);
> + if (crtc->event) {
> + drm_send_vblank_event(dev, crtc->id, crtc->event);
> + drm_vblank_put(dev, crtc->id);
> + crtc->event = NULL;
> + }
> + spin_unlock_irqrestore(&dev->event_lock, flags);
> +}
> +
> +void atmel_hlcdc_crtc_irq(struct drm_crtc *c)
> +{
> + drm_handle_vblank(c->dev, 0);
> + atmel_hlcdc_crtc_finish_page_flip(drm_crtc_to_atmel_hlcdc_crtc(c));
> +}
> +
> +static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *c,
> + struct drm_framebuffer *fb,
> + struct drm_pending_vblank_event *event,
> + uint32_t page_flip_flags)
> +{
> + struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(c);
> + struct atmel_hlcdc_plane_update_req req;
> + struct drm_plane *plane = c->primary;
> + struct drm_device *dev = c->dev;
> + unsigned long flags;
> + int ret = 0;
> +
> + spin_lock_irqsave(&dev->event_lock, flags);
> + if (crtc->event)
> + ret = -EBUSY;
> + spin_unlock_irqrestore(&dev->event_lock, flags);
> +
> + if (ret)
> + return ret;
> +
> + memset(&req, 0, sizeof(req));
> + req.crtc_x = 0;
> + req.crtc_y = 0;
> + req.crtc_h = c->mode.crtc_vdisplay;
> + req.crtc_w = c->mode.crtc_hdisplay;
> + req.src_x = c->x << 16;
> + req.src_y = c->y << 16;
> + req.src_w = req.crtc_w << 16;
> + req.src_h = req.crtc_h << 16;
> + req.fb = fb;
> + req.crtc = c;
> +
> + ret = atmel_hlcdc_plane_prepare_update_req(plane, &req);
> + if (ret)
> + return ret;
> +
> + if (event) {
> + drm_vblank_get(c->dev, crtc->id);
> + spin_lock_irqsave(&dev->event_lock, flags);
> + crtc->event = event;
> + spin_unlock_irqrestore(&dev->event_lock, flags);
> + }
> +
> + ret = atmel_hlcdc_plane_apply_update_req(plane, &req);
> + if (ret)
> + crtc->event = NULL;
> + else
> + plane->fb = fb;
> +
> + return ret;
> +}
> +
> +static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
> + .page_flip = atmel_hlcdc_crtc_page_flip,
> + .set_config = drm_crtc_helper_set_config,
> + .destroy = atmel_hlcdc_crtc_destroy,
> +};
> +
> +int atmel_hlcdc_crtc_create(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> + struct atmel_hlcdc_planes *planes = dc->planes;
> + struct atmel_hlcdc_crtc *crtc;
> + int ret;
> + int i;
> +
> + crtc = kzalloc(sizeof(*crtc), GFP_KERNEL);
> + if (!crtc)
> + return -ENOMEM;
> +
> + crtc->dpms = DRM_MODE_DPMS_OFF;
> + crtc->dc = dc;
> +
> + ret = drm_crtc_init_with_planes(dev, &crtc->base,
> + &planes->primary->base,
> + planes->cursor ? &planes->cursor->base : NULL,
> + &atmel_hlcdc_crtc_funcs);
> + if (ret < 0)
> + goto fail;
> +
> + crtc->id = drm_crtc_index(&crtc->base);
> +
> + if (planes->cursor)
> + planes->cursor->base.possible_crtcs = 1 << crtc->id;
> +
> + for (i = 0; i < planes->noverlays; i++)
> + planes->overlays[i]->base.possible_crtcs = 1 << crtc->id;
> +
> + drm_crtc_helper_add(&crtc->base, &lcdc_crtc_helper_funcs);
> +
> + dc->crtc = &crtc->base;
> +
> + return 0;
> +
> +fail:
> + atmel_hlcdc_crtc_destroy(&crtc->base);
> + return ret;
> +}
> +
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> new file mode 100644
> index 0000000..031bf6b
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> @@ -0,0 +1,531 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@...phandler.com>
> + * Author: Boris BREZILLON <boris.brezillon@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "atmel_hlcdc_dc.h"
> +
> +#define ATMEL_HLCDC_LAYER_IRQS_OFFSET 8
> +
> +static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
> + {
> + .name = "base",
> + .formats = &atmel_hlcdc_plane_rgb_formats,
> + .regs_offset = 0x40,
> + .id = 0,
> + .type = ATMEL_HLCDC_BASE_LAYER,
> + .nconfigs = 7,
> + .layout = {
> + .xstride = { 2 },
> + .default_color = 3,
> + .general_config = 4,
> + .disc_pos = 5,
> + .disc_size = 6,
> + },
> + },
> + {
> + .name = "overlay1",
> + .formats = &atmel_hlcdc_plane_rgb_formats,
> + .regs_offset = 0x140,
> + .id = 1,
> + .type = ATMEL_HLCDC_OVERLAY_LAYER,
> + .nconfigs = 10,
> + .layout = {
> + .pos = 2,
> + .size = 3,
> + .xstride = { 4 },
> + .pstride = { 5 },
> + .default_color = 6,
> + .chroma_key = 7,
> + .chroma_key_mask = 8,
> + .general_config = 9,
> + },
> + },
> + {
> + .name = "overlay2",
> + .formats = &atmel_hlcdc_plane_rgb_formats,
> + .regs_offset = 0x240,
> + .id = 2,
> + .type = ATMEL_HLCDC_OVERLAY_LAYER,
> + .nconfigs = 10,
> + .layout = {
> + .pos = 2,
> + .size = 3,
> + .xstride = { 4 },
> + .pstride = { 5 },
> + .default_color = 6,
> + .chroma_key = 7,
> + .chroma_key_mask = 8,
> + .general_config = 9,
> + },
> + },
> + {
> + .name = "high-end-overlay",
> + .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats,
> + .regs_offset = 0x340,
> + .id = 3,
> + .type = ATMEL_HLCDC_OVERLAY_LAYER,
> + .nconfigs = 42,
> + .layout = {
> + .pos = 2,
> + .size = 3,
> + .memsize = 4,
> + .xstride = { 5, 7 },
> + .pstride = { 6, 8 },
> + .default_color = 9,
> + .chroma_key = 10,
> + .chroma_key_mask = 11,
> + .general_config = 12,
> + .csc = 14,
> + },
> + },
> + {
> + .name = "cursor",
> + .formats = &atmel_hlcdc_plane_rgb_formats,
> + .regs_offset = 0x440,
> + .id = 4,
> + .type = ATMEL_HLCDC_CURSOR_LAYER,
> + .nconfigs = 10,
> + .max_width = 128,
> + .max_height = 128,
> + .layout = {
> + .pos = 2,
> + .size = 3,
> + .xstride = { 4 },
> + .pstride = { 5 },
> + .default_color = 6,
> + .chroma_key = 7,
> + .chroma_key_mask = 8,
> + .general_config = 9,
> + },
> + },
> +};
> +
> +static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d3 = {
> + .min_width = 0,
> + .min_height = 0,
> + .max_width = 2048,
> + .max_height = 2048,
> + .nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d3_layers),
> + .layers = atmel_hlcdc_sama5d3_layers,
> +};
> +
> +static const struct of_device_id atmel_hlcdc_of_match[] = {
> + {
> + .compatible = "atmel,sama5d3-hlcdc",
> + .data = &atmel_hlcdc_dc_sama5d3,
> + },
> + { /* sentinel */ },
> +};
> +
> +int atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
> + struct drm_display_mode *mode)
> +{
> + int vfront_porch = mode->vsync_start - mode->vdisplay;
> + int vback_porch = mode->vtotal - mode->vsync_end;
> + int vsync_len = mode->vsync_end - mode->vsync_start;
> + int hfront_porch = mode->hsync_start - mode->hdisplay;
> + int hback_porch = mode->htotal - mode->hsync_end;
> + int hsync_len = mode->hsync_end - mode->hsync_start;
> +
> + if (hsync_len > 0x40 || hsync_len < 1)
> + return MODE_HSYNC;
> +
> + if (vsync_len > 0x40 || vsync_len < 1)
> + return MODE_VSYNC;
> +
> + if (hfront_porch > 0x200 || hfront_porch < 1 ||
> + hback_porch > 0x200 || hback_porch < 1 ||
> + mode->hdisplay < 1)
> + return MODE_H_ILLEGAL;
> +
> + if (vfront_porch > 0x40 || vfront_porch < 1 ||
> + vback_porch > 0x40 || vback_porch < 0 ||
> + mode->vdisplay < 1)
> + return MODE_V_ILLEGAL;
> +
> + return MODE_OK;
> +}
> +
> +static irqreturn_t atmel_hlcdc_dc_irq_handler(int irq, void *data)
> +{
> + struct drm_device *dev = data;
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> + unsigned long status;
> + unsigned int imr, isr;
> + int i;
> +
> + regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_IMR, &imr);
> + regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_ISR, &isr);
> + status = imr & isr;
> + if (!status)
> + return IRQ_NONE;
> +
> + if (status & ATMEL_HLCDC_SOF)
> + atmel_hlcdc_crtc_irq(dc->crtc);
> +
> + for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) {
> + struct atmel_hlcdc_layer *layer = dc->layers[i];
> +
> + if (!(ATMEL_HLCDC_LAYER_STATUS(i) & status) || !layer)
> + continue;
> +
> + atmel_hlcdc_layer_irq(layer);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static struct drm_framebuffer *atmel_hlcdc_fb_create(struct drm_device *dev,
> + struct drm_file *file_priv, struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> + return drm_fb_cma_create(dev, file_priv, mode_cmd);
> +}
> +
> +static void atmel_hlcdc_fb_output_poll_changed(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> +
> + if (dc->fbdev) {
> + drm_fbdev_cma_hotplug_event(dc->fbdev);
> + } else {
> + dc->fbdev = drm_fbdev_cma_init(dev, 24,
> + dev->mode_config.num_crtc,
> + dev->mode_config.num_connector);
> + if (IS_ERR(dc->fbdev))
> + dc->fbdev = NULL;
> + }
> +}
> +
> +static const struct drm_mode_config_funcs mode_config_funcs = {
> + .fb_create = atmel_hlcdc_fb_create,
> + .output_poll_changed = atmel_hlcdc_fb_output_poll_changed,
> +};
> +
> +static int atmel_hlcdc_dc_modeset_init(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> + struct atmel_hlcdc_planes *planes;
> + int ret;
> + int i;
> +
> + drm_mode_config_init(dev);
> +
> + ret = atmel_hlcdc_create_outputs(dev);
> + if (ret) {
> + dev_err(dev->dev, "failed to create panel: %d\n", ret);
> + return ret;
> + }
> +
> + planes = atmel_hlcdc_create_planes(dev);
> + if (IS_ERR(planes)) {
> + dev_err(dev->dev, "failed to create planes\n");
> + return PTR_ERR(planes);
> + }
> +
> + dc->planes = planes;
> +
> + dc->layers[planes->primary->layer.desc->id] =
> + &planes->primary->layer;
> +
> + if (planes->cursor)
> + dc->layers[planes->cursor->layer.desc->id] =
> + &planes->cursor->layer;
> +
> + for (i = 0; i < planes->noverlays; i++)
> + dc->layers[planes->overlays[i]->layer.desc->id] =
> + &planes->overlays[i]->layer;
> +
> + ret = atmel_hlcdc_crtc_create(dev);
> + if (ret) {
> + dev_err(dev->dev, "failed to create crtc\n");
> + return ret;
> + }
> +
> + dev->mode_config.min_width = dc->desc->min_width;
> + dev->mode_config.min_height = dc->desc->min_height;
> + dev->mode_config.max_width = dc->desc->max_width;
> + dev->mode_config.max_height = dc->desc->max_height;
> + dev->mode_config.funcs = &mode_config_funcs;
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_dc_load(struct drm_device *dev, unsigned long flags)
> +{
> + struct platform_device *pdev = to_platform_device(dev->dev);
> + const struct of_device_id *match;
> + struct atmel_hlcdc_dc *dc;
> + int ret;
> +
> + match = of_match_node(atmel_hlcdc_of_match, dev->dev->parent->of_node);
> + if (!match) {
> + dev_err(&pdev->dev, "invalid compatible string\n");
> + return -ENODEV;
> + }
> +
> + if (!match->data) {
> + dev_err(&pdev->dev, "invalid hlcdc description\n");
> + return -EINVAL;
> + }
> +
> + dc = devm_kzalloc(dev->dev, sizeof(*dc), GFP_KERNEL);
> + if (!dc)
> + return -ENOMEM;
> +
> + dc->wq = alloc_ordered_workqueue("atmel-hlcdc-dc", 0);
> + if (!dc->wq)
> + return -ENOMEM;
> +
> + dc->desc = match->data;
> + dc->hlcdc = dev_get_drvdata(dev->dev->parent);
> + dev->dev_private = dc;
> +
> + ret = clk_prepare_enable(dc->hlcdc->periph_clk);
> + if (ret) {
> + dev_err(dev->dev, "failed to enable periph_clk\n");
> + goto err_destroy_wq;
> + }
> +
> + pm_runtime_enable(dev->dev);
> +
> + pm_runtime_put_sync(dev->dev);
> +
> + ret = atmel_hlcdc_dc_modeset_init(dev);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to initialize mode setting\n");
> + goto err_periph_clk_disable;
> + }
> +
> + ret = drm_vblank_init(dev, 1);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to initialize vblank\n");
> + goto err_periph_clk_disable;
> + }
> +
> + pm_runtime_get_sync(dev->dev);
> + ret = drm_irq_install(dev, dc->hlcdc->irq);
> + pm_runtime_put_sync(dev->dev);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to install IRQ handler\n");
> + goto err_periph_clk_disable;
> + }
> +
> + platform_set_drvdata(pdev, dev);
> +
> + drm_kms_helper_poll_init(dev);
> +
> + /* force connectors detection */
> + drm_helper_hpd_irq_event(dev);
> +
> + return 0;
> +
> +err_periph_clk_disable:
> + clk_disable_unprepare(dc->hlcdc->periph_clk);
> +
> +err_destroy_wq:
> + destroy_workqueue(dc->wq);
> +
> + return ret;
> +}
> +
> +static int atmel_hlcdc_dc_unload(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> +
> + drm_kms_helper_poll_fini(dev);
> + drm_mode_config_cleanup(dev);
> + drm_vblank_cleanup(dev);
> +
> + pm_runtime_get_sync(dev->dev);
> + drm_irq_uninstall(dev);
> + pm_runtime_put_sync(dev->dev);
> +
> + dev->dev_private = NULL;
> +
> + pm_runtime_disable(dev->dev);
> + clk_disable_unprepare(dc->hlcdc->periph_clk);
> +
> + flush_workqueue(dc->wq);
> + destroy_workqueue(dc->wq);
> +
> + return 0;
> +}
> +
> +static void atmel_hlcdc_dc_preclose(struct drm_device *dev,
> + struct drm_file *file)
> +{
> + struct drm_crtc *crtc;
> +
> + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
> + atmel_hlcdc_crtc_cancel_page_flip(crtc, file);
> +}
> +
> +static void atmel_hlcdc_dc_lastclose(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> +
> + drm_fbdev_cma_restore_mode(dc->fbdev);
> +}
> +
> +static void atmel_hlcdc_dc_irq_preinstall(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> + unsigned int isr;
> +
> + regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IDR, 0xffffffff);
> + regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_ISR, &isr);
> +}
> +
> +static int atmel_hlcdc_dc_irq_postinstall(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> + /* Enable SOF (Start Of Frame) interrupt for vblank counting */
> + unsigned int cfg = ATMEL_HLCDC_SOF;
> + int i;
> +
> + /* Enable interrupts on activated layers */
> + for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) {
> + if (dc->layers[i])
> + cfg |= ATMEL_HLCDC_LAYER_STATUS(i);
> + }
> +
> + regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, cfg);
> +
> + return 0;
> +}
> +
> +static void atmel_hlcdc_dc_irq_uninstall(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> + unsigned int isr;
> +
> + regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IDR, 0xffffffff);
> + regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_ISR, &isr);
> +}
This looks like the atmel_hlcdc_dc_irq_preinstall(). But well, okay.
> +
> +static int atmel_hlcdc_dc_enable_vblank(struct drm_device *dev, int crtc)
> +{
> + return 0;
> +}
> +
> +static void atmel_hlcdc_dc_disable_vblank(struct drm_device *dev, int crtc)
> +{
> +}
> +
> +static const struct file_operations fops = {
> + .owner = THIS_MODULE,
> + .open = drm_open,
> + .release = drm_release,
> + .unlocked_ioctl = drm_ioctl,
> +#ifdef CONFIG_COMPAT
> + .compat_ioctl = drm_compat_ioctl,
> +#endif
> + .poll = drm_poll,
> + .read = drm_read,
> + .llseek = no_llseek,
> + .mmap = drm_gem_cma_mmap,
> +};
> +
> +static struct drm_driver atmel_hlcdc_dc_driver = {
> + .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET,
> + .load = atmel_hlcdc_dc_load,
> + .unload = atmel_hlcdc_dc_unload,
> + .preclose = atmel_hlcdc_dc_preclose,
> + .lastclose = atmel_hlcdc_dc_lastclose,
> + .irq_handler = atmel_hlcdc_dc_irq_handler,
> + .irq_preinstall = atmel_hlcdc_dc_irq_preinstall,
> + .irq_postinstall = atmel_hlcdc_dc_irq_postinstall,
> + .irq_uninstall = atmel_hlcdc_dc_irq_uninstall,
> + .get_vblank_counter = drm_vblank_count,
> + .enable_vblank = atmel_hlcdc_dc_enable_vblank,
> + .disable_vblank = atmel_hlcdc_dc_disable_vblank,
> + .gem_free_object = drm_gem_cma_free_object,
> + .gem_vm_ops = &drm_gem_cma_vm_ops,
> + .dumb_create = drm_gem_cma_dumb_create,
> + .dumb_map_offset = drm_gem_cma_dumb_map_offset,
> + .dumb_destroy = drm_gem_dumb_destroy,
> + .fops = &fops,
> + .name = "atmel-hlcdc",
> + .desc = "Atmel HLCD Controller DRM",
> + .date = "20141504",
> + .major = 1,
> + .minor = 0,
> +};
> +
> +static int atmel_hlcdc_dc_drm_probe(struct platform_device *pdev)
> +{
> + struct drm_device *ddev;
> + int ret;
> +
> + ddev = drm_dev_alloc(&atmel_hlcdc_dc_driver, &pdev->dev);
> + if (!ddev)
> + return -ENOMEM;
> +
> + ret = drm_dev_set_unique(ddev, dev_name(ddev->dev));
> + if (ret) {
> + drm_dev_unref(ddev);
> + return ret;
> + }
> +
> + ret = drm_dev_register(ddev, 0);
> + if (ret) {
> + drm_dev_unref(ddev);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_dc_drm_remove(struct platform_device *pdev)
> +{
> + struct drm_device *ddev = platform_get_drvdata(pdev);
> +
> + drm_dev_unregister(ddev);
> + drm_dev_unref(ddev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id atmel_hlcdc_dc_of_match[] = {
> + { .compatible = "atmel,hlcdc-display-controller" },
> + { },
> +};
> +
> +static struct platform_driver atmel_hlcdc_dc_platform_driver = {
> + .probe = atmel_hlcdc_dc_drm_probe,
> + .remove = atmel_hlcdc_dc_drm_remove,
> + .driver = {
> + .name = "atmel-hlcdc-display-controller",
> + .of_match_table = atmel_hlcdc_dc_of_match,
> + },
> +};
> +module_platform_driver(atmel_hlcdc_dc_platform_driver);
> +
> +MODULE_AUTHOR("Jean-Jacques Hiblot <jjhiblot@...phandler.com>");
> +MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@...e-electrons.com>");
> +MODULE_DESCRIPTION("Atmel HLCDC Display Controller DRM Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:atmel-hlcdc-dc");
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> new file mode 100644
> index 0000000..8194152
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> @@ -0,0 +1,216 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@...phandler.com>
> + * Author: Boris BREZILLON <boris.brezillon@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef DRM_ATMEL_HLCDC_H
> +#define DRM_ATMEL_HLCDC_H
> +
> +#include <linux/clk.h>
> +#include <linux/irqdomain.h>
> +#include <linux/pwm.h>
> +
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drmP.h>
> +
> +#include "atmel_hlcdc_layer.h"
> +
> +#define ATMEL_HLCDC_MAX_LAYERS 5
> +
> +/**
> + * Atmel HLCDC Display Controller description structure.
> + *
> + * This structure describe the HLCDC IP capabilities and depends on the
> + * HLCDC IP version (or Atmel SoC family).
> + *
> + * @min_width: minimum width supported by the Display Controller
> + * @min_height: minimum height supported by the Display Controller
> + * @max_width: maximum width supported by the Display Controller
> + * @max_height: maximum height supported by the Display Controller
> + * @layer: a layer description table describing available layers
> + * @nlayers: layer description table size
> + */
> +struct atmel_hlcdc_dc_desc {
> + int min_width;
> + int min_height;
> + int max_width;
> + int max_height;
> + const struct atmel_hlcdc_layer_desc *layers;
> + int nlayers;
> +};
> +
> +/**
> + * Atmel HLCDC Plane properties.
> + *
> + * This structure stores plane property definitions.
> + *
> + * @alpha: alpha blending (or transparency) property
> + * @csc: YUV to RGB conversion factors property
> + */
> +struct atmel_hlcdc_plane_properties {
> + struct drm_property *alpha;
> + struct drm_property *rotation;
> +};
> +
> +/**
> + * Atmel HLCDC Plane.
> + *
> + * @base: base DRM plane structure
> + * @layer: HLCDC layer structure
> + * @properties: pointer to the property definitions structure
> + * @alpha: current alpha blending (or transparency) status
I don't see alpha in the structure below. On the other hand, I see
"rotation" which is not described.
> + */
> +struct atmel_hlcdc_plane {
> + struct drm_plane base;
> + struct atmel_hlcdc_layer layer;
> + struct atmel_hlcdc_plane_properties *properties;
> + unsigned int rotation;
> +};
> +
> +static inline struct atmel_hlcdc_plane *
> +drm_plane_to_atmel_hlcdc_plane(struct drm_plane *p)
> +{
> + return container_of(p, struct atmel_hlcdc_plane, base);
> +}
> +
> +static inline struct atmel_hlcdc_plane *
> +atmel_hlcdc_layer_to_plane(struct atmel_hlcdc_layer *l)
> +{
> + return container_of(l, struct atmel_hlcdc_plane, layer);
> +}
> +
> +/**
> + * Atmel HLCDC Plane update request structure.
> + *
> + * @crtc_x: x position of the plane relative to the CRTC
> + * @crtc_y: y position of the plane relative to the CRTC
> + * @crtc_w: visible width of the plane
> + * @crtc_h: visible height of the plane
> + * @src_x: x buffer position
> + * @src_y: y buffer position
> + * @src_w: buffer width
> + * @src_h: buffer height
> + * @pixel_format: pixel format
> + * @gems: GEM object object containing image buffers
> + * @offsets: offsets to apply to the GEM buffers
> + * @pitches: line size in bytes
> + * @crtc: crtc to display on
> + * @finished: finished callback
> + * @finished_data: data passed to the finished callback
> + * @bpp: bytes per pixel deduced from pixel_format
> + * @xstride: value to add to the pixel pointer between each line
> + * @pstride: value to add to the pixel pointer between each pixel
> + * @nplanes: number of planes (deduced from pixel_format)
Ditto: structure documentation not in sync with code.
> + */
> +struct atmel_hlcdc_plane_update_req {
> + int crtc_x;
> + int crtc_y;
> + unsigned int crtc_w;
> + unsigned int crtc_h;
> + uint32_t src_x;
> + uint32_t src_y;
> + uint32_t src_w;
> + uint32_t src_h;
> + struct drm_framebuffer *fb;
> + struct drm_crtc *crtc;
> +
> + /* These fields are private and should not be touched */
> + int bpp[ATMEL_HLCDC_MAX_PLANES];
> + unsigned int offsets[ATMEL_HLCDC_MAX_PLANES];
> + int xstride[ATMEL_HLCDC_MAX_PLANES];
> + int pstride[ATMEL_HLCDC_MAX_PLANES];
> + int nplanes;
> +};
> +
> +/**
> + * Atmel HLCDC Planes.
> + *
> + * This structure stores the instantiated HLCDC Planes and can be accessed by
> + * the HLCDC Display Controller or the HLCDC CRTC.
> + *
> + * @primary: primary plane
> + * @cursor: hardware cursor plane
> + * @overlays: overlay plane table
> + * @noverlays: number of overlay planes
> + */
> +struct atmel_hlcdc_planes {
> + struct atmel_hlcdc_plane *primary;
> + struct atmel_hlcdc_plane *cursor;
> + struct atmel_hlcdc_plane **overlays;
> + int noverlays;
> +};
> +
> +/**
> + * Atmel HLCDC Display Controller.
> + *
> + * @desc: HLCDC Display Controller description
> + * @hlcdc: pointer to the atmel_hlcdc structure provided by the MFD device
> + * @fbdev: framebuffer device attached to the Display Controller
> + * @crtc: CRTC provided by the display controller
> + * @planes: instantiated planes
> + * @layers: active HLCDC layer
> + * @wq: display controller workqueue
> + */
> +struct atmel_hlcdc_dc {
> + const struct atmel_hlcdc_dc_desc *desc;
> + struct atmel_hlcdc *hlcdc;
> + struct drm_fbdev_cma *fbdev;
> + struct drm_crtc *crtc;
> + struct atmel_hlcdc_planes *planes;
> + struct atmel_hlcdc_layer *layers[ATMEL_HLCDC_MAX_LAYERS];
> + struct workqueue_struct *wq;
> +};
> +
> +extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_formats;
> +extern struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_and_yuv_formats;
> +
> +int atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
> + struct drm_display_mode *mode);
> +
> +struct atmel_hlcdc_planes *
> +atmel_hlcdc_create_planes(struct drm_device *dev);
> +
> +int atmel_hlcdc_plane_prepare_update_req(struct drm_plane *p,
> + struct atmel_hlcdc_plane_update_req *req);
> +
> +int atmel_hlcdc_plane_apply_update_req(struct drm_plane *p,
> + struct atmel_hlcdc_plane_update_req *req);
> +
> +void atmel_hlcdc_crtc_irq(struct drm_crtc *c);
> +
> +void atmel_hlcdc_crtc_cancel_page_flip(struct drm_crtc *crtc,
> + struct drm_file *file);
> +
> +int atmel_hlcdc_crtc_create(struct drm_device *dev);
> +
> +int atmel_hlcdc_create_outputs(struct drm_device *dev);
> +
> +struct atmel_hlcdc_pwm_chip *atmel_hlcdc_pwm_create(struct drm_device *dev,
> + struct clk *slow_clk,
> + struct clk *sys_clk,
> + void __iomem *regs);
> +
> +int atmel_hlcdc_pwm_destroy(struct drm_device *dev,
> + struct atmel_hlcdc_pwm_chip *chip);
> +
> +#endif /* DRM_ATMEL_HLCDC_H */
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
> new file mode 100644
> index 0000000..4799325
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c
> @@ -0,0 +1,638 @@
> +/*
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Boris BREZILLON <boris.brezillon@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +
> +#include "atmel_hlcdc_dc.h"
> +
> +static void
> +atmel_hlcdc_layer_fb_flip_release(struct drm_flip_work *work, void *val)
> +{
> + struct atmel_hlcdc_layer_fb_flip *flip = val;
> +
> + if (flip->fb)
> + drm_framebuffer_unreference(flip->fb);
> + kfree(flip);
> +}
> +
> +static void
> +atmel_hlcdc_layer_fb_flip_destroy(struct atmel_hlcdc_layer_fb_flip *flip)
> +{
> + if (flip->fb)
> + drm_framebuffer_unreference(flip->fb);
> + kfree(flip->task);
> + kfree(flip);
> +}
> +
> +static void
> +atmel_hlcdc_layer_fb_flip_release_queue(struct atmel_hlcdc_layer *layer,
> + struct atmel_hlcdc_layer_fb_flip *flip)
> +{
> + int i;
> +
> + if (!flip)
> + return;
> +
> + for (i = 0; i < layer->max_planes; i++) {
> + if (!flip->dscrs[i])
> + break;
> +
> + flip->dscrs[i]->status = 0;
> + flip->dscrs[i] = NULL;
> + }
> +
> + drm_flip_work_queue_task(&layer->gc, flip->task);
> + drm_flip_work_commit(&layer->gc, layer->wq);
> +}
> +
> +static void atmel_hlcdc_layer_update_reset(struct atmel_hlcdc_layer *layer,
> + int id)
> +{
> + struct atmel_hlcdc_layer_update *upd = &layer->update;
> + struct atmel_hlcdc_layer_update_slot *slot;
> +
> + if (id < 0 || id > 1)
> + return;
> +
> + slot = &upd->slots[id];
> + bitmap_clear(slot->updated_configs, 0, layer->desc->nconfigs);
> + memset(slot->configs, 0,
> + sizeof(*slot->configs) * layer->desc->nconfigs);
> +
> + if (slot->fb_flip) {
> + atmel_hlcdc_layer_fb_flip_release_queue(layer, slot->fb_flip);
> + slot->fb_flip = NULL;
> + }
> +}
> +
> +static void atmel_hlcdc_layer_update_apply(struct atmel_hlcdc_layer *layer)
> +{
> + struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
> + const struct atmel_hlcdc_layer_desc *desc = layer->desc;
> + struct atmel_hlcdc_layer_update *upd = &layer->update;
> + struct regmap *regmap = layer->hlcdc->regmap;
> + struct atmel_hlcdc_layer_update_slot *slot;
> + struct atmel_hlcdc_layer_fb_flip *fb_flip;
> + struct atmel_hlcdc_dma_channel_dscr *dscr;
> + unsigned int cfg;
> + u32 action = 0;
> + int i = 0;
> +
> + if (upd->pending < 0 || upd->pending > 1 ||
> + dma->status == ATMEL_HLCDC_LAYER_DISABLING)
> + return;
> +
> + slot = &upd->slots[upd->pending];
> +
> + for_each_set_bit(cfg, slot->updated_configs, layer->desc->nconfigs) {
> + regmap_write(regmap,
> + desc->regs_offset +
> + ATMEL_HLCDC_LAYER_CFG(layer, cfg),
> + slot->configs[cfg]);
> + action |= ATMEL_HLCDC_LAYER_UPDATE;
> + }
> +
> + fb_flip = slot->fb_flip;
> +
> + if (!fb_flip->fb)
> + goto apply;
> +
> + if (dma->status == ATMEL_HLCDC_LAYER_DISABLED) {
> + for (i = 0; i < fb_flip->ngems; i++) {
> + dscr = fb_flip->dscrs[i];
> + dscr->ctrl = ATMEL_HLCDC_LAYER_DFETCH |
> + ATMEL_HLCDC_LAYER_DMA_IRQ |
> + ATMEL_HLCDC_LAYER_ADD_IRQ |
> + ATMEL_HLCDC_LAYER_DONE_IRQ;
> +
> + regmap_write(regmap,
> + desc->regs_offset +
> + ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
> + dscr->addr);
> + regmap_write(regmap,
> + desc->regs_offset +
> + ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
> + dscr->ctrl);
> + regmap_write(regmap,
> + desc->regs_offset +
> + ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
> + dscr->next);
> + }
> +
> + action |= ATMEL_HLCDC_LAYER_DMA_CHAN;
> + dma->status = ATMEL_HLCDC_LAYER_ENABLED;
> + } else {
> + for (i = 0; i < fb_flip->ngems; i++) {
> + dscr = fb_flip->dscrs[i];
> + dscr->ctrl = ATMEL_HLCDC_LAYER_DFETCH |
> + ATMEL_HLCDC_LAYER_DMA_IRQ |
> + ATMEL_HLCDC_LAYER_DSCR_IRQ |
> + ATMEL_HLCDC_LAYER_DONE_IRQ;
> +
> + regmap_write(regmap,
> + desc->regs_offset +
> + ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
> + dscr->next);
> + }
> +
> + action |= ATMEL_HLCDC_LAYER_A2Q;
> + }
> +
> + /* Release unneeded descriptors */
> + for (i = fb_flip->ngems; i < layer->max_planes; i++) {
> + fb_flip->dscrs[i]->status = 0;
> + fb_flip->dscrs[i] = NULL;
> + }
> +
> + dma->queue = fb_flip;
> + slot->fb_flip = NULL;
> +
> +apply:
> + if (action)
> + regmap_write(regmap,
> + desc->regs_offset + ATMEL_HLCDC_LAYER_CHER,
> + action);
> +
> + atmel_hlcdc_layer_update_reset(layer, upd->pending);
> +
> + upd->pending = -1;
> +}
> +
> +void atmel_hlcdc_layer_irq(struct atmel_hlcdc_layer *layer)
> +{
> + struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
> + const struct atmel_hlcdc_layer_desc *desc = layer->desc;
> + struct regmap *regmap = layer->hlcdc->regmap;
> + struct atmel_hlcdc_layer_fb_flip *flip;
> + unsigned long flags;
> + unsigned int isr, imr;
> + unsigned int status;
> + unsigned int plane_status;
> + u32 flip_status;
> +
> + int i;
> +
> + regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_IMR, &imr);
> + regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR, &isr);
> + status = imr & isr;
> + if (!status)
> + return;
> +
> + spin_lock_irqsave(&layer->lock, flags);
> +
> + flip = dma->queue ? dma->queue : dma->cur;
> +
> + if (!flip) {
> + spin_unlock_irqrestore(&layer->lock, flags);
> + return;
> + }
> +
> + flip_status = 0;
> + for (i = 0; i < flip->ngems; i++) {
> + plane_status = (status >> (8 * i));
> +
> + if (plane_status &
> + (ATMEL_HLCDC_LAYER_ADD_IRQ |
> + ATMEL_HLCDC_LAYER_DSCR_IRQ) &
> + ~flip->dscrs[i]->ctrl) {
> + flip->dscrs[i]->status |=
> + ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED;
> + flip->dscrs[i]->ctrl |=
> + ATMEL_HLCDC_LAYER_ADD_IRQ |
> + ATMEL_HLCDC_LAYER_DSCR_IRQ;
> + }
> +
> + if (plane_status &
> + ATMEL_HLCDC_LAYER_DONE_IRQ &
> + ~flip->dscrs[i]->ctrl) {
> + flip->dscrs[i]->status |=
> + ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE;
> + flip->dscrs[i]->ctrl |=
> + ATMEL_HLCDC_LAYER_DONE_IRQ;
> + }
> +
> + if (plane_status & ATMEL_HLCDC_LAYER_OVR_IRQ)
> + flip->dscrs[i]->status |=
> + ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN;
> +
> + flip_status |= flip->dscrs[i]->status;
> + }
> +
> + /* Get changed bits */
> + flip_status ^= flip->status;
> + flip->status |= flip_status;
> +
> + if (flip_status & ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED) {
> + atmel_hlcdc_layer_fb_flip_release_queue(layer, dma->cur);
> + dma->cur = dma->queue;
> + dma->queue = NULL;
> + }
> +
> + if (flip_status & ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE) {
> + atmel_hlcdc_layer_fb_flip_release_queue(layer, dma->cur);
> + dma->cur = NULL;
> + }
> +
> + if (flip_status & ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN) {
> + regmap_write(regmap,
> + desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
> + ATMEL_HLCDC_LAYER_RST);
> + if (dma->queue)
> + atmel_hlcdc_layer_fb_flip_release_queue(layer,
> + dma->queue);
> +
> + if (dma->cur)
> + atmel_hlcdc_layer_fb_flip_release_queue(layer,
> + dma->cur);
> +
> + dma->cur = NULL;
> + dma->queue = NULL;
> + }
> +
> + if (!dma->queue) {
> + atmel_hlcdc_layer_update_apply(layer);
> +
> + if (!dma->cur)
> + dma->status = ATMEL_HLCDC_LAYER_DISABLED;
> + }
> +
> + spin_unlock_irqrestore(&layer->lock, flags);
> +}
> +
> +int atmel_hlcdc_layer_disable(struct atmel_hlcdc_layer *layer)
> +{
> + struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
> + struct atmel_hlcdc_layer_update *upd = &layer->update;
> + struct atmel_hlcdc_layer_fb_flip *flip;
> + unsigned long flags;
> + int i;
> +
> + spin_lock_irqsave(&layer->lock, flags);
> +
> + /*
> + * First disable DMA transfers. If a DMA transfer has been queued
> + * we're stopping this one instead of the current one because we
> + * can't know for sure if queued transfer has been started or not.
> + */
> + flip = dma->queue ? dma->queue : dma->cur;
> + if (flip) {
> + for (i = 0; i < flip->ngems; i++)
> + flip->dscrs[i]->ctrl &= ~(ATMEL_HLCDC_LAYER_DFETCH |
> + ATMEL_HLCDC_LAYER_DONE_IRQ);
> +
> + dma->status = ATMEL_HLCDC_LAYER_DISABLING;
> + }
> +
> + /*
> + * Then discard the pending update request (if any) to prevent
> + * DMA irq handler from restarting the DMA channel after it has
> + * been disabled.
> + */
> + if (upd->pending >= 0) {
> + atmel_hlcdc_layer_update_reset(layer, upd->pending);
> + upd->pending = -1;
> + }
> +
> + spin_unlock_irqrestore(&layer->lock, flags);
> +
> + return 0;
> +}
> +
> +int atmel_hlcdc_layer_update_start(struct atmel_hlcdc_layer *layer)
> +{
> + struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
> + struct atmel_hlcdc_layer_update *upd = &layer->update;
> + struct regmap *regmap = layer->hlcdc->regmap;
> + struct atmel_hlcdc_layer_fb_flip *fb_flip;
> + struct atmel_hlcdc_layer_update_slot *slot;
> + unsigned long flags;
> + int i, j = 0;
> +
> + fb_flip = kzalloc(sizeof(*fb_flip), GFP_KERNEL);
> + if (!fb_flip)
> + return -ENOMEM;
> +
> + fb_flip->task = drm_flip_work_allocate_task(fb_flip, GFP_KERNEL);
> + if (!fb_flip->task) {
> + kfree(fb_flip);
> + return -ENOMEM;
> + }
> +
> + spin_lock_irqsave(&layer->lock, flags);
> +
> + upd->next = upd->pending ? 0 : 1;
> +
> + slot = &upd->slots[upd->next];
> +
> + for (i = 0; i < layer->max_planes * 4; i++) {
> + if (!dma->dscrs[i].status) {
> + fb_flip->dscrs[j++] = &dma->dscrs[i];
> + dma->dscrs[i].status =
> + ATMEL_HLCDC_DMA_CHANNEL_DSCR_RESERVED;
> + if (j == layer->max_planes)
> + break;
> + }
> + }
> +
> + if (j < layer->max_planes) {
> + for (i = 0; i < j; i++)
> + fb_flip->dscrs[i]->status = 0;
> + }
> +
> + if (j < layer->max_planes) {
> + spin_unlock_irqrestore(&layer->lock, flags);
> + atmel_hlcdc_layer_fb_flip_destroy(fb_flip);
> + return -EBUSY;
> + }
> +
> + slot->fb_flip = fb_flip;
> +
> + if (upd->pending >= 0) {
> + memcpy(slot->configs,
> + upd->slots[upd->pending].configs,
> + layer->desc->nconfigs * sizeof(u32));
> + memcpy(slot->updated_configs,
> + upd->slots[upd->pending].updated_configs,
> + DIV_ROUND_UP(layer->desc->nconfigs,
> + BITS_PER_BYTE * sizeof(unsigned long)) *
> + sizeof(unsigned long));
> + slot->fb_flip->fb = upd->slots[upd->pending].fb_flip->fb;
> + if (upd->slots[upd->pending].fb_flip->fb) {
> + slot->fb_flip->fb =
> + upd->slots[upd->pending].fb_flip->fb;
> + slot->fb_flip->ngems =
> + upd->slots[upd->pending].fb_flip->ngems;
> + drm_framebuffer_reference(slot->fb_flip->fb);
> + }
> + } else {
> + regmap_bulk_read(regmap,
> + layer->desc->regs_offset +
> + ATMEL_HLCDC_LAYER_CFG(layer, 0),
> + upd->slots[upd->next].configs,
> + layer->desc->nconfigs);
> + }
> +
> + spin_unlock_irqrestore(&layer->lock, flags);
> +
> + return 0;
> +}
> +
> +void atmel_hlcdc_layer_update_rollback(struct atmel_hlcdc_layer *layer)
> +{
> + struct atmel_hlcdc_layer_update *upd = &layer->update;
> +
> + atmel_hlcdc_layer_update_reset(layer, upd->next);
> + upd->next = -1;
> +}
> +
> +void atmel_hlcdc_layer_update_set_fb(struct atmel_hlcdc_layer *layer,
> + struct drm_framebuffer *fb,
> + unsigned int *offsets)
> +{
> + struct atmel_hlcdc_layer_update *upd = &layer->update;
> + struct atmel_hlcdc_layer_fb_flip *fb_flip;
> + struct atmel_hlcdc_layer_update_slot *slot;
> + struct atmel_hlcdc_dma_channel_dscr *dscr;
> + struct drm_framebuffer *old_fb;
> + int nplanes = 0;
> + int i;
> +
> + if (upd->next < 0 || upd->next > 1)
> + return;
> +
> + if (fb)
> + nplanes = drm_format_num_planes(fb->pixel_format);
> +
> + if (nplanes > layer->max_planes)
> + return;
> +
> + slot = &upd->slots[upd->next];
> +
> + fb_flip = slot->fb_flip;
> + old_fb = slot->fb_flip->fb;
> +
> + for (i = 0; i < nplanes; i++) {
> + struct drm_gem_cma_object *gem;
> +
> + dscr = slot->fb_flip->dscrs[i];
> + gem = drm_fb_cma_get_gem_obj(fb, i);
> + dscr->addr = gem->paddr + offsets[i];
> + }
> +
> + fb_flip->ngems = nplanes;
> + fb_flip->fb = fb;
> +
> + if (fb)
> + drm_framebuffer_reference(fb);
> +
> + if (old_fb)
> + drm_framebuffer_unreference(old_fb);
> +}
> +
> +void atmel_hlcdc_layer_update_cfg(struct atmel_hlcdc_layer *layer, int cfg,
> + u32 mask, u32 val)
> +{
> + struct atmel_hlcdc_layer_update *upd = &layer->update;
> + struct atmel_hlcdc_layer_update_slot *slot;
> +
> + if (upd->next < 0 || upd->next > 1)
> + return;
> +
> + if (cfg >= layer->desc->nconfigs)
> + return;
> +
> + slot = &upd->slots[upd->next];
> + slot->configs[cfg] &= ~mask;
> + slot->configs[cfg] |= (val & mask);
> + set_bit(cfg, slot->updated_configs);
> +}
> +
> +void atmel_hlcdc_layer_update_commit(struct atmel_hlcdc_layer *layer)
> +{
> + struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
> + struct atmel_hlcdc_layer_update *upd = &layer->update;
> + struct atmel_hlcdc_layer_update_slot *slot;
> + unsigned long flags;
> +
> + if (upd->next < 0 || upd->next > 1)
> + return;
> +
> + slot = &upd->slots[upd->next];
> +
> + spin_lock_irqsave(&layer->lock, flags);
> +
> + /*
> + * Release pending update request and replace it by the new one.
> + */
> + if (upd->pending >= 0)
> + atmel_hlcdc_layer_update_reset(layer, upd->pending);
> +
> + upd->pending = upd->next;
> + upd->next = -1;
> +
> + if (!dma->queue)
> + atmel_hlcdc_layer_update_apply(layer);
> +
> + spin_unlock_irqrestore(&layer->lock, flags);
> +
> +
> + upd->next = -1;
> +}
> +
> +static int atmel_hlcdc_layer_dma_init(struct drm_device *dev,
> + struct atmel_hlcdc_layer *layer)
> +{
> + struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
> + dma_addr_t dma_addr;
> + int i;
> +
> + dma->dscrs = dma_alloc_coherent(dev->dev,
> + layer->max_planes * 4 *
> + sizeof(*dma->dscrs),
> + &dma_addr, GFP_KERNEL);
> + if (!dma->dscrs)
> + return -ENOMEM;
> +
> + for (i = 0; i < layer->max_planes * 4; i++) {
> + struct atmel_hlcdc_dma_channel_dscr *dscr = &dma->dscrs[i];
> +
> + dscr->next = dma_addr + (i * sizeof(*dscr));
> + }
> +
> + return 0;
> +}
> +
> +static void atmel_hlcdc_layer_dma_cleanup(struct drm_device *dev,
> + struct atmel_hlcdc_layer *layer)
> +{
> + struct atmel_hlcdc_layer_dma_channel *dma = &layer->dma;
> + int i;
> +
> + for (i = 0; i < layer->max_planes * 4; i++) {
> + struct atmel_hlcdc_dma_channel_dscr *dscr = &dma->dscrs[i];
> +
> + dscr->status = 0;
> + }
> +
> + dma_free_coherent(dev->dev, layer->max_planes * 4 *
> + sizeof(*dma->dscrs), dma->dscrs,
> + dma->dscrs[0].next);
> +}
> +
> +static int atmel_hlcdc_layer_update_init(struct drm_device *dev,
> + struct atmel_hlcdc_layer *layer,
> + const struct atmel_hlcdc_layer_desc *desc)
> +{
> + struct atmel_hlcdc_layer_update *upd = &layer->update;
> + int updated_size;
> + void *buffer;
> + int i;
> +
> + updated_size = DIV_ROUND_UP(desc->nconfigs,
> + BITS_PER_BYTE *
> + sizeof(unsigned long));
> +
> + buffer = devm_kzalloc(dev->dev,
> + ((desc->nconfigs * sizeof(u32)) +
> + (updated_size * sizeof(unsigned long))) * 2,
> + GFP_KERNEL);
> + if (!buffer)
> + return -ENOMEM;
> +
> + for (i = 0; i < 2; i++) {
> + upd->slots[i].updated_configs = buffer;
> + buffer += updated_size * sizeof(unsigned long);
> + upd->slots[i].configs = buffer;
> + buffer += desc->nconfigs * sizeof(u32);
> + }
> +
> + upd->pending = -1;
> + upd->next = -1;
> +
> + return 0;
> +}
> +
> +int atmel_hlcdc_layer_init(struct drm_device *dev,
> + struct atmel_hlcdc_layer *layer,
> + const struct atmel_hlcdc_layer_desc *desc)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> + struct regmap *regmap = dc->hlcdc->regmap;
> + unsigned int tmp;
> + int ret;
> + int i;
> +
> + layer->hlcdc = dc->hlcdc;
> + layer->wq = dc->wq;
> + layer->desc = desc;
> +
> + regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
> + ATMEL_HLCDC_LAYER_RST);
> + for (i = 0; i < desc->formats->nformats; i++) {
> + int nplanes = drm_format_num_planes(desc->formats->formats[i]);
> +
> + if (nplanes > layer->max_planes)
> + layer->max_planes = nplanes;
> + }
> +
> + spin_lock_init(&layer->lock);
> + drm_flip_work_init(&layer->gc, desc->name,
> + atmel_hlcdc_layer_fb_flip_release);
> + ret = atmel_hlcdc_layer_dma_init(dev, layer);
> + if (ret)
> + return ret;
> +
> + ret = atmel_hlcdc_layer_update_init(dev, layer, desc);
> + if (ret)
> + return ret;
> +
> + /* Flush Status Register */
> + regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_IDR,
> + 0xffffffff);
> + regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR,
> + &tmp);
> +
> + tmp = 0;
> + for (i = 0; i < layer->max_planes; i++)
> + tmp |= (ATMEL_HLCDC_LAYER_DMA_IRQ |
> + ATMEL_HLCDC_LAYER_DSCR_IRQ |
> + ATMEL_HLCDC_LAYER_ADD_IRQ |
> + ATMEL_HLCDC_LAYER_DONE_IRQ |
> + ATMEL_HLCDC_LAYER_OVR_IRQ) << (8 * i);
> +
> + regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_IER, tmp);
> +
> + return 0;
> +}
> +
> +void atmel_hlcdc_layer_cleanup(struct drm_device *dev,
> + struct atmel_hlcdc_layer *layer)
> +{
> + const struct atmel_hlcdc_layer_desc *desc = layer->desc;
> + struct regmap *regmap = layer->hlcdc->regmap;
> +
> + regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_IDR,
> + 0xffffffff);
> + regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR,
> + ATMEL_HLCDC_LAYER_RST);
> +
> + atmel_hlcdc_layer_dma_cleanup(dev, layer);
> + drm_flip_work_cleanup(&layer->gc);
> +}
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h
> new file mode 100644
> index 0000000..01fcf96
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.h
> @@ -0,0 +1,394 @@
> +/*
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Boris BREZILLON <boris.brezillon@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef DRM_ATMEL_HLCDC_LAYER_H
> +#define DRM_ATMEL_HLCDC_LAYER_H
> +
> +#include <linux/mfd/atmel-hlcdc.h>
> +
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_flip_work.h>
> +#include <drm/drmP.h>
> +
> +#define ATMEL_HLCDC_LAYER_CHER 0x0
> +#define ATMEL_HLCDC_LAYER_CHDR 0x4
> +#define ATMEL_HLCDC_LAYER_CHSR 0x8
> +#define ATMEL_HLCDC_LAYER_DMA_CHAN BIT(0)
> +#define ATMEL_HLCDC_LAYER_UPDATE BIT(1)
Can you avoid mixing "BIT()" and "(1 << 16)" below and 0x4/8 above.
Please change all to a coherent declaration.
> +#define ATMEL_HLCDC_LAYER_A2Q BIT(2)
> +#define ATMEL_HLCDC_LAYER_RST BIT(8)
> +
> +#define ATMEL_HLCDC_LAYER_IER 0xc
> +#define ATMEL_HLCDC_LAYER_IDR 0x10
> +#define ATMEL_HLCDC_LAYER_IMR 0x14
> +#define ATMEL_HLCDC_LAYER_ISR 0x18
> +#define ATMEL_HLCDC_LAYER_DFETCH BIT(0)
> +#define ATMEL_HLCDC_LAYER_LFETCH BIT(1)
> +#define ATMEL_HLCDC_LAYER_DMA_IRQ BIT(2)
> +#define ATMEL_HLCDC_LAYER_DSCR_IRQ BIT(3)
> +#define ATMEL_HLCDC_LAYER_ADD_IRQ BIT(4)
> +#define ATMEL_HLCDC_LAYER_DONE_IRQ BIT(5)
> +#define ATMEL_HLCDC_LAYER_OVR_IRQ BIT(6)
> +
> +#define ATMEL_HLCDC_LAYER_PLANE_HEAD(n) (((n) * 0x10) + 0x1c)
> +#define ATMEL_HLCDC_LAYER_PLANE_ADDR(n) (((n) * 0x10) + 0x20)
> +#define ATMEL_HLCDC_LAYER_PLANE_CTRL(n) (((n) * 0x10) + 0x24)
> +#define ATMEL_HLCDC_LAYER_PLANE_NEXT(n) (((n) * 0x10) + 0x28)
> +#define ATMEL_HLCDC_LAYER_CFG(p, c) (((c) * 4) + ((p)->max_planes * 0x10) + 0x1c)
> +
> +#define ATMEL_HLCDC_LAYER_DMA_CFG_ID 0
> +#define ATMEL_HLCDC_LAYER_DMA_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, ATMEL_HLCDC_LAYER_DMA_CFG_ID)
> +#define ATMEL_HLCDC_LAYER_DMA_SIF BIT(0)
> +#define ATMEL_HLCDC_LAYER_DMA_BLEN_MASK GENMASK(5, 4)
I don't see the BLEN defined in the driver: can you set it to AHB_INCR4
minimum but maybe better with AHB_INCR16.
> +#define ATMEL_HLCDC_LAYER_DMA_DLBO BIT(8)
> +#define ATMEL_HLCDC_LAYER_DMA_ROTDIS BIT(12)
> +#define ATMEL_HLCDC_LAYER_DMA_LOCKDIS BIT(13)
> +
> +#define ATMEL_HLCDC_LAYER_FORMAT_CFG_ID 1
> +#define ATMEL_HLCDC_LAYER_FORMAT_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, ATMEL_HLCDC_LAYER_FORMAT_CFG_ID)
> +#define ATMEL_HLCDC_LAYER_RGB (0 << 0)
> +#define ATMEL_HLCDC_LAYER_CLUT (1 << 0)
> +#define ATMEL_HLCDC_LAYER_YUV (2 << 0)
> +#define ATMEL_HLCDC_RGB_MODE(m) (((m) & 0xf) << 4)
> +#define ATMEL_HLCDC_CLUT_MODE(m) (((m) & 0x3) << 8)
> +#define ATMEL_HLCDC_YUV_MODE(m) (((m) & 0xf) << 12)
> +#define ATMEL_HLCDC_YUV422ROT (1 << 16)
> +#define ATMEL_HLCDC_YUV422SWP (1 << 17)
> +#define ATMEL_HLCDC_DSCALEOPT (1 << 20)
> +
> +#define ATMEL_HLCDC_XRGB4444_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(0))
> +#define ATMEL_HLCDC_ARGB4444_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(1))
> +#define ATMEL_HLCDC_RGBA4444_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(2))
> +#define ATMEL_HLCDC_RGB565_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(3))
> +#define ATMEL_HLCDC_ARGB1555_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(4))
> +#define ATMEL_HLCDC_XRGB8888_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(9))
> +#define ATMEL_HLCDC_RGB888_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(10))
> +#define ATMEL_HLCDC_ARGB8888_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(12))
> +#define ATMEL_HLCDC_RGBA8888_MODE (ATMEL_HLCDC_LAYER_RGB | ATMEL_HLCDC_RGB_MODE(13))
> +
> +#define ATMEL_HLCDC_AYUV_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(0))
> +#define ATMEL_HLCDC_YUYV_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(1))
> +#define ATMEL_HLCDC_UYVY_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(2))
> +#define ATMEL_HLCDC_YVYU_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(3))
> +#define ATMEL_HLCDC_VYUY_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(4))
> +#define ATMEL_HLCDC_NV61_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(5))
> +#define ATMEL_HLCDC_YUV422_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(6))
> +#define ATMEL_HLCDC_NV21_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(7))
> +#define ATMEL_HLCDC_YUV420_MODE (ATMEL_HLCDC_LAYER_YUV | ATMEL_HLCDC_YUV_MODE(8))
> +
> +#define ATMEL_HLCDC_LAYER_POS_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.pos)
> +#define ATMEL_HLCDC_LAYER_SIZE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.size)
> +#define ATMEL_HLCDC_LAYER_MEMSIZE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.memsize)
> +#define ATMEL_HLCDC_LAYER_XSTRIDE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.xstride)
> +#define ATMEL_HLCDC_LAYER_PSTRIDE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.pstride)
> +#define ATMEL_HLCDC_LAYER_DFLTCOLOR_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.default_color)
> +#define ATMEL_HLCDC_LAYER_CRKEY_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.chroma_key)
> +#define ATMEL_HLCDC_LAYER_CRKEY_MASK_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.chroma_key_mask)
> +
> +#define ATMEL_HLCDC_LAYER_GENERAL_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.general_config)
> +#define ATMEL_HLCDC_LAYER_CRKEY BIT(0)
> +#define ATMEL_HLCDC_LAYER_INV BIT(1)
> +#define ATMEL_HLCDC_LAYER_ITER2BL BIT(2)
> +#define ATMEL_HLCDC_LAYER_ITER BIT(3)
> +#define ATMEL_HLCDC_LAYER_REVALPHA BIT(4)
> +#define ATMEL_HLCDC_LAYER_GAEN BIT(5)
> +#define ATMEL_HLCDC_LAYER_LAEN BIT(6)
> +#define ATMEL_HLCDC_LAYER_OVR BIT(7)
> +#define ATMEL_HLCDC_LAYER_DMA BIT(8)
> +#define ATMEL_HLCDC_LAYER_REP BIT(9)
> +#define ATMEL_HLCDC_LAYER_DSTKEY BIT(10)
> +#define ATMEL_HLCDC_LAYER_DISCEN BIT(11)
> +#define ATMEL_HLCDC_LAYER_GA_MASK GENMASK(23, 16)
Is this value (16) ^^^^ related to this one vvvv ?
> +#define ATMEL_HLCDC_LAYER_GA_SHIFT 16
> +
> +#define ATMEL_HLCDC_LAYER_CSC_CFG(p, o) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.csc + o)
> +
> +#define ATMEL_HLCDC_LAYER_DISC_POS_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.disc_pos)
> +
> +#define ATMEL_HLCDC_LAYER_DISC_SIZE_CFG(p) ATMEL_HLCDC_LAYER_CFG(p, (p)->desc->layout.disc_size)
> +
> +#define ATMEL_HLCDC_MAX_PLANES 3
> +
> +#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_RESERVED BIT(0)
> +#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_LOADED BIT(1)
> +#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE BIT(2)
> +#define ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN BIT(3)
> +
> +/**
> + * Atmel HLCDC Layer registers layout structure
> + *
> + * Each HLCDC layer has its own register organization and a given register
> + * by be placed differently on 2 different layers depending on its
by?
> + * capabilities.
> + * This structure stores common registers layout for a given layer and is
> + * used by HLCDC layer code to chose the appropriate register to write to
s/chose/choose/
> + * or to read from.
> + *
> + * For all fields, a value of zero means "unsupported".
> + *
> + * See Atmel's datasheet for a detailled description of these registers.
> + *
> + * @xstride: xstride registers
> + * @pstride: pstride registers
> + * @pos: position register
> + * @size: displayed size register
> + * @memsize: memory size register
> + * @default_color: default color register
> + * @chroma_key: chroma key register
> + * @chroma_key_mask: chroma key mask register
> + * @general_config: general layer config register
> + * @disc_pos: discard area position register
> + * @disc_size: discard area size register
> + * @csc: color space conversion register
> + */
> +struct atmel_hlcdc_layer_cfg_layout {
> + int xstride[ATMEL_HLCDC_MAX_PLANES];
> + int pstride[ATMEL_HLCDC_MAX_PLANES];
> + int pos;
> + int size;
> + int memsize;
> + int default_color;
> + int chroma_key;
> + int chroma_key_mask;
> + int general_config;
> + int disc_pos;
> + int disc_size;
> + int csc;
> +};
> +
> +/**
> + * Atmel HLCDC framebuffer flip structure
> + *
> + * This structure is allocated when someone asked for a layer update (most
> + * likely a DRM plane update, either primary, overlay or cursor plane) and
> + * released when the layer do not need to reference the framebuffer object
> + * anymore (i.e. the layer was disabled or updated).
> + *
> + * @fb: the referenced framebuffer object.
> + * @refcnt: the number of GEM object still referenced by the layer.
> + * When no more objects are referenced the fb flip structure is
> + * added to the garbage collector.
> + * @ngems: number of GEM objects referenced by the fb element.
Please update documentation of this structure.
> + */
> +struct atmel_hlcdc_layer_fb_flip {
> + struct atmel_hlcdc_dma_channel_dscr *dscrs[ATMEL_HLCDC_MAX_PLANES];
> + struct drm_flip_task *task;
> + struct drm_framebuffer *fb;
> + int ngems;
> + u32 status;
> +};
> +
> +/**
> + * Atmel HLCDC DMA descriptor structure
> + *
> + * This structure is used by the HLCDC DMA engine to schedule a DMA transfer.
> + *
> + * The structure fields must remain in this specific order, because they're
> + * used by the HLCDC DMA engine, which expect them in this order.
> + *
> + * @addr: buffer DMA address
> + * @ctrl: DMA transfer options
> + * @next: next DMA descriptor to fetch
> + * @gem_flip: the attached gem_flip operation
> + */
> +struct atmel_hlcdc_dma_channel_dscr {
> + dma_addr_t addr;
> + u32 ctrl;
> + dma_addr_t next;
> + u32 status;
> +} __aligned(sizeof(u64));
Can you add a comment in the documentation section above about this
alignement constrain (which is needed for sure)?
> +
> +/**
> + * Atmel HLCDC layer types
> + */
> +enum atmel_hlcdc_layer_type {
> + ATMEL_HLCDC_BASE_LAYER,
> + ATMEL_HLCDC_OVERLAY_LAYER,
> + ATMEL_HLCDC_CURSOR_LAYER,
> + ATMEL_HLCDC_PP_LAYER,
> +};
> +
> +/**
> + * Atmel HLCDC Supported formats structure
> + *
> + * This structure list all the formats supported by a given layer.
> + *
> + * @nformats: number of supported formats
> + * @formats: supported formats
> + */
> +struct atmel_hlcdc_formats {
> + int nformats;
> + uint32_t *formats;
> +};
> +
> +/**
> + * Atmel HLCDC Layer description structure
> + *
> + * This structure describe the capabilities provided by a given layer.
> + *
> + * @name: layer name
> + * @type: layer type
> + * @id: layer id
> + * @regs_offset: offset of the layer registers from the HLCDC registers base
> + * @nconfigs: number of config registers provided by this layer
"formats" missing?
> + * @layout: config registers layout
> + * @max_width: maximum width supported by this layer (0 means unlimited)
> + * @max_height: maximum height supported by this layer (0 means unlimited)
> + */
> +struct atmel_hlcdc_layer_desc {
> + const char *name;
> + enum atmel_hlcdc_layer_type type;
> + int id;
> + int regs_offset;
> + int nconfigs;
> + struct atmel_hlcdc_formats *formats;
> + struct atmel_hlcdc_layer_cfg_layout layout;
> + int max_width;
> + int max_height;
> +};
> +
> +/**
> + * Atmel HLCDC Layer Update Slot structure
> + *
> + * This structure stores layer update requests to be applied on next frame.
> + * This is the base structure behind the atomic layer update infrastructure.
> + *
> + * Atomic layer update provides a way to update all layer's parameters
> + * simultaneously. This is needed to avoid incompatible sequential updates
> + * like this one:
> + * 1) update layer format from RGB888 (1 plane/buffer) to YUV422
> + * (2 planes/buffers)
> + * 2) the format update is applied but the DMA channel for the second
> + * plane/buffer is not enabled
> + * 3) enable the DMA channel for the second plane
> + *
> + * @dscrs: DMA channel descriptors
^^^ not in structure.
> + * @fb_flip: fb_flip object
> + * @updated_configs: bitmask used to record modified configs
> + * @configs: new config values
> + */
> +struct atmel_hlcdc_layer_update_slot {
> + struct atmel_hlcdc_layer_fb_flip *fb_flip;
> + unsigned long *updated_configs;
> + u32 *configs;
> +};
> +
> +/**
> + * Atmel HLCDC Layer Update structure
> + *
> + * This structure provides a way to queue layer update requests.
> + *
> + * At a given time there is at most:
> + * - one pending update request, which means the update request has been
> + * commited (or validated) and is waiting for the DMA channel(s) to be
> + * available
> + * - one request being prepared, which means someone started a layer update
> + * but has not commited it yet. There cannot be more than one started
> + * request, because the update lock is taken when starting a layer update
> + * and release when commiting or rolling back the request.
> + *
> + * @slots: update slots. One is used for pending request and the other one
> + * for started update request
> + * @pending: the pending slot index or -1 if no request is pending
> + * @next: the started update slot index or -1 no update has been started
> + */
> +struct atmel_hlcdc_layer_update {
> + struct atmel_hlcdc_layer_update_slot slots[2];
> + int pending;
> + int next;
> +};
> +
> +enum atmel_hlcdc_layer_dma_channel_status {
> + ATMEL_HLCDC_LAYER_DISABLED,
> + ATMEL_HLCDC_LAYER_ENABLED,
> + ATMEL_HLCDC_LAYER_DISABLING,
> +};
> +
> +/**
> + * Atmel HLCDC Layer DMA channel structure
> + *
> + * This structure stores informations on the DMA channel associated to a
> + * given layer.
> + *
> + * @status: DMA channel status
> + * @cur: current framebuffer
> + * @queue: next framebuffer
> + * @dscrs: allocated DMA descriptors
> + */
> +struct atmel_hlcdc_layer_dma_channel {
> + enum atmel_hlcdc_layer_dma_channel_status status;
> + struct atmel_hlcdc_layer_fb_flip *cur;
> + struct atmel_hlcdc_layer_fb_flip *queue;
> + struct atmel_hlcdc_dma_channel_dscr *dscrs;
> +};
> +
> +/**
> + * Atmel HLCDC Layer structure
> + *
> + * This structure stores information on the layer instance.
> + *
> + * @desc: layer description
> + * @max_planes: maximum planes/buffers that can be associated with this layer.
> + * This depends on the supported formats.
> + * @hlcdc: pointer to the atmel_hlcdc structure provided by the MFD device
> + * @dma: dma channel
> + * @gc: fb flip garbage collector
> + * @update: update handler
> + * @lock: layer lock
> + */
> +struct atmel_hlcdc_layer {
> + const struct atmel_hlcdc_layer_desc *desc;
> + int max_planes;
> + struct atmel_hlcdc *hlcdc;
> + struct workqueue_struct *wq;
> + struct drm_flip_work gc;
> + struct atmel_hlcdc_layer_dma_channel dma;
> + struct atmel_hlcdc_layer_update update;
> + spinlock_t lock;
> +};
> +
> +void atmel_hlcdc_layer_irq(struct atmel_hlcdc_layer *layer);
> +
> +int atmel_hlcdc_layer_init(struct drm_device *dev,
> + struct atmel_hlcdc_layer *layer,
> + const struct atmel_hlcdc_layer_desc *desc);
> +
> +void atmel_hlcdc_layer_cleanup(struct drm_device *dev,
> + struct atmel_hlcdc_layer *layer);
> +
> +int atmel_hlcdc_layer_disable(struct atmel_hlcdc_layer *layer);
> +
> +int atmel_hlcdc_layer_update_start(struct atmel_hlcdc_layer *layer);
> +
> +void atmel_hlcdc_layer_update_cfg(struct atmel_hlcdc_layer *layer, int cfg,
> + u32 mask, u32 val);
> +
> +void atmel_hlcdc_layer_update_set_fb(struct atmel_hlcdc_layer *layer,
> + struct drm_framebuffer *fb,
> + unsigned int *offsets);
> +
> +void atmel_hlcdc_layer_update_set_finished(struct atmel_hlcdc_layer *layer,
> + void (*finished)(void *data),
> + void *finished_data);
> +
> +void atmel_hlcdc_layer_update_rollback(struct atmel_hlcdc_layer *layer);
> +
> +void atmel_hlcdc_layer_update_commit(struct atmel_hlcdc_layer *layer);
> +
> +#endif /* DRM_ATMEL_HLCDC_LAYER_H */
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
> new file mode 100644
> index 0000000..8d3a5cb
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c
> @@ -0,0 +1,443 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@...phandler.com>
> + * Author: Boris BREZILLON <boris.brezillon@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/of_graph.h>
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_panel.h>
> +
> +#include "atmel_hlcdc_dc.h"
> +
> +/**
> + * Atmel HLCDC RGB output mode
> + */
> +enum atmel_hlcdc_connector_rgb_mode {
> + ATMEL_HLCDC_CONNECTOR_RGB444,
> + ATMEL_HLCDC_CONNECTOR_RGB565,
> + ATMEL_HLCDC_CONNECTOR_RGB666,
> + ATMEL_HLCDC_CONNECTOR_RGB888,
> +};
> +
> +struct atmel_hlcdc_slave;
> +
> +/**
> + * Atmel HLCDC Slave device operations structure
> + *
> + * This structure defines an abstraction to be implemented by each slave
> + * device type (panel, convertors, ...).
> + *
> + * @enable: Enable the slave device
> + * @disable: Disable the slave device
> + * @get_modes: retrieve modes supported by the slave device
mode_valid missing.
> + * @destroy: detroy the slave device and all associated data
> + */
> +struct atmel_hlcdc_slave_ops {
> + int (*enable)(struct atmel_hlcdc_slave *slave);
> + int (*disable)(struct atmel_hlcdc_slave *slave);
> + int (*get_modes)(struct atmel_hlcdc_slave *slave);
> + int (*mode_valid)(struct atmel_hlcdc_slave *slave,
> + struct drm_display_mode *mode);
> + void (*destroy)(struct atmel_hlcdc_slave *slave);
> +};
> +
> +/**
> + * Atmel HLCDC Slave device structure
> + *
> + * This structure is the base slave device structure to be overloaded by
> + * each slave device implementation.
> + *
> + * @ops: slave device operations
> + */
> +struct atmel_hlcdc_slave {
> + const struct atmel_hlcdc_slave_ops *ops;
> +};
> +
> +/**
> + * Atmel HLCDC Panel device structure
> + *
> + * This structure is specialization of the slave device structure to
> + * interface with drm panels.
> + *
> + * @slave: base slave device fields
> + * @panel: drm panel attached to this slave device
> + */
> +struct atmel_hlcdc_panel {
> + struct atmel_hlcdc_slave slave;
> + struct drm_panel *panel;
> +};
> +
> +static inline struct atmel_hlcdc_panel *
> +atmel_hlcdc_slave_to_panel(struct atmel_hlcdc_slave *slave)
> +{
> + return container_of(slave, struct atmel_hlcdc_panel, slave);
> +}
> +
> +/**
> + * Atmel HLCDC RGB connector structure
> + *
> + * This structure stores informations about an DRM panel connected through
> + * the RGB connector.
> + *
> + * @connector: DRM connector
> + * @encoder: DRM encoder
> + * @hlcdc: pointer to the atmel_hlcdc structure provided by the MFD device
^^^^ it is "dc" now.
> + * @slave: slave device connected to this output
> + * @endpoint: DT endpoint representing this output
> + * @dpms: current DPMS mode
> + */
> +struct atmel_hlcdc_rgb_output {
> + struct drm_connector connector;
> + struct drm_encoder encoder;
> + struct atmel_hlcdc_dc *dc;
> + struct atmel_hlcdc_slave *slave;
> + struct of_endpoint endpoint;
> + int dpms;
> +};
> +
> +static inline struct atmel_hlcdc_rgb_output *
> +drm_connector_to_atmel_hlcdc_rgb_output(struct drm_connector *connector)
> +{
> + return container_of(connector, struct atmel_hlcdc_rgb_output,
> + connector);
> +}
> +
> +static inline struct atmel_hlcdc_rgb_output *
> +drm_encoder_to_atmel_hlcdc_rgb_output(struct drm_encoder *encoder)
> +{
> + return container_of(encoder, struct atmel_hlcdc_rgb_output, encoder);
> +}
> +
> +static int atmel_hlcdc_panel_enable(struct atmel_hlcdc_slave *slave)
> +{
> + struct atmel_hlcdc_panel *panel = atmel_hlcdc_slave_to_panel(slave);
> +
> + return drm_panel_enable(panel->panel);
> +}
> +
> +static int atmel_hlcdc_panel_disable(struct atmel_hlcdc_slave *slave)
> +{
> + struct atmel_hlcdc_panel *panel = atmel_hlcdc_slave_to_panel(slave);
> +
> + return drm_panel_disable(panel->panel);
> +}
> +
> +static int atmel_hlcdc_panel_get_modes(struct atmel_hlcdc_slave *slave)
> +{
> + struct atmel_hlcdc_panel *panel = atmel_hlcdc_slave_to_panel(slave);
> +
> + return panel->panel->funcs->get_modes(panel->panel);
> +}
> +
> +static int atmel_hlcdc_panel_mode_valid(struct atmel_hlcdc_slave *slave,
> + struct drm_display_mode *mode)
> +{
> + return MODE_OK;
> +}
> +
> +static void atmel_hlcdc_panel_destroy(struct atmel_hlcdc_slave *slave)
> +{
> + struct atmel_hlcdc_panel *panel = atmel_hlcdc_slave_to_panel(slave);
> +
> + drm_panel_detach(panel->panel);
> + kfree(panel);
> +}
> +
> +static const struct atmel_hlcdc_slave_ops atmel_hlcdc_panel_ops = {
> + .enable = atmel_hlcdc_panel_enable,
> + .disable = atmel_hlcdc_panel_disable,
> + .get_modes = atmel_hlcdc_panel_get_modes,
> + .mode_valid = atmel_hlcdc_panel_mode_valid,
> + .destroy = atmel_hlcdc_panel_destroy,
> +};
> +
> +static struct atmel_hlcdc_slave *
> +atmel_hlcdc_panel_detect(struct atmel_hlcdc_rgb_output *rgb)
> +{
> + struct device_node *np;
> + struct drm_panel *p = NULL;
> + struct atmel_hlcdc_panel *panel;
> +
> + np = of_graph_get_remote_port_parent(rgb->endpoint.local_node);
> + if (!np)
> + return NULL;
> +
> + p = of_drm_find_panel(np);
> + of_node_put(np);
> +
> + if (p) {
> + panel = kzalloc(sizeof(*panel), GFP_KERNEL);
> + if (!panel)
> + return NULL;
> +
> + drm_panel_attach(p, &rgb->connector);
> + panel->panel = p;
> + panel->slave.ops = &atmel_hlcdc_panel_ops;
> + return &panel->slave;
> + }
> +
> + return NULL;
> +}
> +
> +static void atmel_hlcdc_rgb_encoder_dpms(struct drm_encoder *encoder,
> + int mode)
> +{
> + struct atmel_hlcdc_rgb_output *rgb =
> + drm_encoder_to_atmel_hlcdc_rgb_output(encoder);
> +
> + if (mode != DRM_MODE_DPMS_ON)
> + mode = DRM_MODE_DPMS_OFF;
> +
> + if (mode == rgb->dpms)
> + return;
> +
> + if (mode != DRM_MODE_DPMS_ON)
> + rgb->slave->ops->disable(rgb->slave);
> + else
> + rgb->slave->ops->enable(rgb->slave);
> +
> + rgb->dpms = mode;
> +}
> +
> +static bool
> +atmel_hlcdc_rgb_encoder_mode_fixup(struct drm_encoder *encoder,
> + const struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted)
> +{
> + return true;
> +}
> +
> +static void atmel_hlcdc_rgb_encoder_prepare(struct drm_encoder *encoder)
> +{
> + atmel_hlcdc_rgb_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
> +}
> +
> +static void atmel_hlcdc_rgb_encoder_commit(struct drm_encoder *encoder)
> +{
> + atmel_hlcdc_rgb_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
> +}
> +
> +static void
> +atmel_hlcdc_rgb_encoder_mode_set(struct drm_encoder *encoder,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted)
> +{
> + struct atmel_hlcdc_rgb_output *rgb =
> + drm_encoder_to_atmel_hlcdc_rgb_output(encoder);
> + struct drm_display_info *info = &rgb->connector.display_info;
> + unsigned int cfg;
> +
> + cfg = 0;
> +
> + if (info->num_bus_formats) {
> + switch (info->bus_formats[0]) {
> + case VIDEO_BUS_FMT_RGB565_1X16:
> + cfg |= ATMEL_HLCDC_CONNECTOR_RGB565 << 8;
> + break;
> + case VIDEO_BUS_FMT_RGB666_1X18:
> + cfg |= ATMEL_HLCDC_CONNECTOR_RGB666 << 8;
> + break;
> + case VIDEO_BUS_FMT_RGB888_1X24:
> + cfg |= ATMEL_HLCDC_CONNECTOR_RGB888 << 8;
> + break;
> + case VIDEO_BUS_FMT_RGB444_1X12:
> + default:
> + break;
> + }
> + }
> +
> + regmap_update_bits(rgb->dc->hlcdc->regmap, ATMEL_HLCDC_CFG(5),
> + ATMEL_HLCDC_MODE_MASK,
> + cfg);
> +}
> +
> +static struct drm_encoder_helper_funcs atmel_hlcdc_rgb_encoder_helper_funcs = {
> + .dpms = atmel_hlcdc_rgb_encoder_dpms,
> + .mode_fixup = atmel_hlcdc_rgb_encoder_mode_fixup,
> + .prepare = atmel_hlcdc_rgb_encoder_prepare,
> + .commit = atmel_hlcdc_rgb_encoder_commit,
> + .mode_set = atmel_hlcdc_rgb_encoder_mode_set,
> +};
> +
> +static void atmel_hlcdc_rgb_encoder_destroy(struct drm_encoder *encoder)
> +{
> + drm_encoder_cleanup(encoder);
> + memset(encoder, 0, sizeof(*encoder));
> +}
> +
> +static const struct drm_encoder_funcs atmel_hlcdc_rgb_encoder_funcs = {
> + .destroy = atmel_hlcdc_rgb_encoder_destroy,
> +};
> +
> +static int atmel_hlcdc_rgb_get_modes(struct drm_connector *connector)
> +{
> + struct atmel_hlcdc_rgb_output *rgb =
> + drm_connector_to_atmel_hlcdc_rgb_output(connector);
> +
> + return rgb->slave->ops->get_modes(rgb->slave);
> +}
> +
> +static int atmel_hlcdc_rgb_mode_valid(struct drm_connector *connector,
> + struct drm_display_mode *mode)
> +{
> + struct atmel_hlcdc_rgb_output *rgb =
> + drm_connector_to_atmel_hlcdc_rgb_output(connector);
> + int ret;
> +
> + ret = atmel_hlcdc_dc_mode_valid(rgb->dc, mode);
> + if (ret != MODE_OK)
> + return ret;
> +
> + return rgb->slave->ops->mode_valid(rgb->slave, mode);
> +}
> +
> +static struct drm_encoder *
> +atmel_hlcdc_rgb_best_encoder(struct drm_connector *connector)
> +{
> + struct atmel_hlcdc_rgb_output *rgb =
> + drm_connector_to_atmel_hlcdc_rgb_output(connector);
> +
> + return &rgb->encoder;
> +}
> +
> +static struct drm_connector_helper_funcs atmel_hlcdc_rgb_connector_helper_funcs = {
> + .get_modes = atmel_hlcdc_rgb_get_modes,
> + .mode_valid = atmel_hlcdc_rgb_mode_valid,
> + .best_encoder = atmel_hlcdc_rgb_best_encoder,
> +};
> +
> +static enum drm_connector_status
> +atmel_hlcdc_rgb_connector_detect(struct drm_connector *connector, bool force)
> +{
> + struct atmel_hlcdc_rgb_output *rgb =
> + drm_connector_to_atmel_hlcdc_rgb_output(connector);
> +
> + if (!rgb->slave) {
> + /* At the moment we only support panel devices */
> + rgb->slave = atmel_hlcdc_panel_detect(rgb);
> + }
> +
> + if (rgb->slave)
> + return connector_status_connected;
> +
> + return connector_status_unknown;
> +}
> +
> +static void
> +atmel_hlcdc_rgb_connector_destroy(struct drm_connector *connector)
> +{
> + struct atmel_hlcdc_rgb_output *rgb =
> + drm_connector_to_atmel_hlcdc_rgb_output(connector);
> +
> + if (rgb->slave && rgb->slave->ops->destroy)
> + rgb->slave->ops->destroy(rgb->slave);
> +
> + drm_connector_unregister(&rgb->connector);
> + drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs atmel_hlcdc_rgb_connector_funcs = {
> + .dpms = drm_helper_connector_dpms,
> + .detect = atmel_hlcdc_rgb_connector_detect,
> + .fill_modes = drm_helper_probe_single_connector_modes,
> + .destroy = atmel_hlcdc_rgb_connector_destroy,
> +};
> +
> +static int atmel_hlcdc_create_output(struct drm_device *dev,
> + struct of_endpoint *ep)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> + struct atmel_hlcdc_rgb_output *rgb;
> + int ret;
> +
> + rgb = devm_kzalloc(dev->dev, sizeof(*rgb), GFP_KERNEL);
> + if (!rgb)
> + return -ENOMEM;
> +
> + rgb->endpoint = *ep;
> +
> + rgb->dpms = DRM_MODE_DPMS_OFF;
> +
> + rgb->dc = dc;
> +
> + drm_encoder_helper_add(&rgb->encoder,
> + &atmel_hlcdc_rgb_encoder_helper_funcs);
> + ret = drm_encoder_init(dev, &rgb->encoder,
> + &atmel_hlcdc_rgb_encoder_funcs,
> + DRM_MODE_ENCODER_LVDS);
> + if (ret)
> + return ret;
> +
> + rgb->connector.dpms = DRM_MODE_DPMS_OFF;
> + rgb->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
> + drm_connector_helper_add(&rgb->connector,
> + &atmel_hlcdc_rgb_connector_helper_funcs);
> + ret = drm_connector_init(dev, &rgb->connector,
> + &atmel_hlcdc_rgb_connector_funcs,
> + DRM_MODE_CONNECTOR_LVDS);
> + if (ret)
> + goto err_encoder_cleanup;
> +
> + drm_mode_connector_attach_encoder(&rgb->connector, &rgb->encoder);
> +
> + ret = drm_connector_register(&rgb->connector);
> + if (ret)
> + goto err_connector_cleanup;
> +
> + rgb->encoder.possible_crtcs = 0x1;
> +
> + return 0;
> +
> +err_connector_cleanup:
> + drm_connector_cleanup(&rgb->connector);
> +err_encoder_cleanup:
> + drm_encoder_cleanup(&rgb->encoder);
> +
> + return ret;
> +}
> +
> +int atmel_hlcdc_create_outputs(struct drm_device *dev)
> +{
> + struct device_node *port_np, *np;
> + struct of_endpoint ep;
> + int ret;
> +
> + port_np = of_get_child_by_name(dev->dev->of_node, "port");
> + if (!port_np)
> + return -EINVAL;
> +
> + np = of_get_child_by_name(port_np, "endpoint");
> + of_node_put(port_np);
> +
> + if (!np)
> + return -EINVAL;
> +
> + ret = of_graph_parse_endpoint(np, &ep);
> + of_node_put(port_np);
> +
> + if (ret)
> + return ret;
> +
> + ret = atmel_hlcdc_create_output(dev, &ep);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> new file mode 100644
> index 0000000..82bbf93
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> @@ -0,0 +1,831 @@
> +/*
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Boris BREZILLON <boris.brezillon@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "atmel_hlcdc_dc.h"
> +
> +#define SUBPIXEL_MASK 0xffff
> +
> +static uint32_t rgb_formats[] = {
> + DRM_FORMAT_XRGB4444,
> + DRM_FORMAT_ARGB4444,
> + DRM_FORMAT_RGBA4444,
> + DRM_FORMAT_ARGB1555,
> + DRM_FORMAT_RGB565,
> + DRM_FORMAT_RGB888,
> + DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_ARGB8888,
> + DRM_FORMAT_RGBA8888,
> +};
> +
> +struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_formats = {
> + .formats = rgb_formats,
> + .nformats = ARRAY_SIZE(rgb_formats),
> +};
> +
> +static uint32_t rgb_and_yuv_formats[] = {
> + DRM_FORMAT_XRGB4444,
> + DRM_FORMAT_ARGB4444,
> + DRM_FORMAT_RGBA4444,
> + DRM_FORMAT_ARGB1555,
> + DRM_FORMAT_RGB565,
> + DRM_FORMAT_RGB888,
> + DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_ARGB8888,
> + DRM_FORMAT_RGBA8888,
> + DRM_FORMAT_AYUV,
> + DRM_FORMAT_YUYV,
> + DRM_FORMAT_UYVY,
> + DRM_FORMAT_YVYU,
> + DRM_FORMAT_VYUY,
> + DRM_FORMAT_NV21,
> + DRM_FORMAT_NV61,
> + DRM_FORMAT_YUV422,
> + DRM_FORMAT_YUV420,
> +};
> +
> +struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_and_yuv_formats = {
> + .formats = rgb_and_yuv_formats,
> + .nformats = ARRAY_SIZE(rgb_and_yuv_formats),
> +};
> +
> +static int atmel_hlcdc_format_to_plane_mode(u32 format, u32 *mode)
> +{
> + switch (format) {
> + case DRM_FORMAT_XRGB4444:
> + *mode = ATMEL_HLCDC_XRGB4444_MODE;
> + break;
> + case DRM_FORMAT_ARGB4444:
> + *mode = ATMEL_HLCDC_ARGB4444_MODE;
> + break;
> + case DRM_FORMAT_RGBA4444:
> + *mode = ATMEL_HLCDC_RGBA4444_MODE;
> + break;
> + case DRM_FORMAT_RGB565:
> + *mode = ATMEL_HLCDC_RGB565_MODE;
> + break;
> + case DRM_FORMAT_RGB888:
> + *mode = ATMEL_HLCDC_RGB888_MODE;
> + break;
> + case DRM_FORMAT_ARGB1555:
> + *mode = ATMEL_HLCDC_ARGB1555_MODE;
> + break;
> + case DRM_FORMAT_XRGB8888:
> + *mode = ATMEL_HLCDC_XRGB8888_MODE;
> + break;
> + case DRM_FORMAT_ARGB8888:
> + *mode = ATMEL_HLCDC_ARGB8888_MODE;
> + break;
> + case DRM_FORMAT_RGBA8888:
> + *mode = ATMEL_HLCDC_RGBA8888_MODE;
> + break;
> + case DRM_FORMAT_AYUV:
> + *mode = ATMEL_HLCDC_AYUV_MODE;
> + break;
> + case DRM_FORMAT_YUYV:
> + *mode = ATMEL_HLCDC_YUYV_MODE;
> + break;
> + case DRM_FORMAT_UYVY:
> + *mode = ATMEL_HLCDC_UYVY_MODE;
> + break;
> + case DRM_FORMAT_YVYU:
> + *mode = ATMEL_HLCDC_YVYU_MODE;
> + break;
> + case DRM_FORMAT_VYUY:
> + *mode = ATMEL_HLCDC_VYUY_MODE;
> + break;
> + case DRM_FORMAT_NV21:
> + *mode = ATMEL_HLCDC_NV21_MODE;
> + break;
> + case DRM_FORMAT_NV61:
> + *mode = ATMEL_HLCDC_NV61_MODE;
> + break;
> + case DRM_FORMAT_YUV420:
> + *mode = ATMEL_HLCDC_YUV420_MODE;
> + break;
> + case DRM_FORMAT_YUV422:
> + *mode = ATMEL_HLCDC_YUV422_MODE;
> + break;
> + default:
> + return -ENOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static bool atmel_hlcdc_format_embedds_alpha(u32 format)
> +{
> + int i;
> +
> + for (i = 0; i < sizeof(format); i++) {
> + char tmp = (format >> (8 * i)) & 0xff;
> +
> + if (tmp == 'A')
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static u32 heo_downscaling_xcoef[] = {
> + 0x11343311,
> + 0x000000f7,
> + 0x1635300c,
> + 0x000000f9,
> + 0x1b362c08,
> + 0x000000fb,
> + 0x1f372804,
> + 0x000000fe,
> + 0x24382400,
> + 0x00000000,
> + 0x28371ffe,
> + 0x00000004,
> + 0x2c361bfb,
> + 0x00000008,
> + 0x303516f9,
> + 0x0000000c,
> +};
> +
> +static u32 heo_downscaling_ycoef[] = {
> + 0x00123737,
> + 0x00173732,
> + 0x001b382d,
> + 0x001f3928,
> + 0x00243824,
> + 0x0028391f,
> + 0x002d381b,
> + 0x00323717,
> +};
> +
> +static u32 heo_upscaling_xcoef[] = {
> + 0xf74949f7,
> + 0x00000000,
> + 0xf55f33fb,
> + 0x000000fe,
> + 0xf5701efe,
> + 0x000000ff,
> + 0xf87c0dff,
> + 0x00000000,
> + 0x00800000,
> + 0x00000000,
> + 0x0d7cf800,
> + 0x000000ff,
> + 0x1e70f5ff,
> + 0x000000fe,
> + 0x335ff5fe,
> + 0x000000fb,
> +};
> +
> +static u32 heo_upscaling_ycoef[] = {
> + 0x00004040,
> + 0x00075920,
> + 0x00056f0c,
> + 0x00027b03,
> + 0x00008000,
> + 0x00037b02,
> + 0x000c6f05,
> + 0x00205907,
> +};
> +
> +static void
> +atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_update_req *req)
> +{
> + const struct atmel_hlcdc_layer_cfg_layout *layout =
> + &plane->layer.desc->layout;
> +
> + if (layout->size)
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + layout->size,
> + 0xffffffff,
> + (req->crtc_w - 1) |
> + ((req->crtc_h - 1) << 16));
> +
> + if (layout->memsize)
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + layout->memsize,
> + 0xffffffff,
> + (req->src_w - 1) |
> + ((req->src_h - 1) << 16));
> +
> + if (layout->pos)
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + layout->pos,
> + 0xffffffff,
> + req->crtc_x |
> + (req->crtc_y << 16));
> +
> + /* TODO: rework the rescaling part */
> + if (req->crtc_w != req->src_w || req->crtc_h != req->src_h) {
> + u32 factor_reg = 0;
> +
> + if (req->crtc_w != req->src_w) {
> + int i;
> + u32 factor;
> + u32 *coeff_tab = heo_upscaling_xcoef;
> + u32 max_memsize;
> +
> + if (req->crtc_w < req->src_w)
> + coeff_tab = heo_downscaling_xcoef;
> + for (i = 0; i < ARRAY_SIZE(heo_upscaling_xcoef); i++)
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + 17 + i,
> + 0xffffffff,
> + coeff_tab[i]);
> + factor = ((8 * 256 * req->src_w) - (256 * 4)) /
> + req->crtc_w;
> + factor++;
> + max_memsize = ((factor * req->crtc_w) + (256 * 4)) /
> + 2048;
> + if (max_memsize > req->src_w)
> + factor--;
> + factor_reg |= factor | 0x80000000;
> + }
> +
> + if (req->crtc_h != req->src_h) {
> + int i;
> + u32 factor;
> + u32 *coeff_tab = heo_upscaling_ycoef;
> + u32 max_memsize;
> +
> + if (req->crtc_w < req->src_w)
> + coeff_tab = heo_downscaling_ycoef;
> + for (i = 0; i < ARRAY_SIZE(heo_upscaling_ycoef); i++)
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + 33 + i,
> + 0xffffffff,
> + coeff_tab[i]);
> + factor = ((8 * 256 * req->src_w) - (256 * 4)) /
> + req->crtc_w;
> + factor++;
> + max_memsize = ((factor * req->crtc_w) + (256 * 4)) /
> + 2048;
> + if (max_memsize > req->src_w)
> + factor--;
> + factor_reg |= (factor << 16) | 0x80000000;
> + }
> +
> + atmel_hlcdc_layer_update_cfg(&plane->layer, 13, 0xffffffff,
> + factor_reg);
> + }
> +}
> +
> +static void
> +atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_update_req *req)
> +{
> + const struct atmel_hlcdc_layer_cfg_layout *layout =
> + &plane->layer.desc->layout;
> + unsigned int cfg = ATMEL_HLCDC_LAYER_DMA;
> +
> + if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
> + cfg |= ATMEL_HLCDC_LAYER_OVR | ATMEL_HLCDC_LAYER_ITER2BL |
> + ATMEL_HLCDC_LAYER_ITER;
> +
> + if (atmel_hlcdc_format_embedds_alpha(req->fb->pixel_format))
> + cfg |= ATMEL_HLCDC_LAYER_LAEN;
> + else
> + cfg |= ATMEL_HLCDC_LAYER_GAEN;
> + }
> +
> + atmel_hlcdc_layer_update_cfg(&plane->layer, layout->general_config,
> + ATMEL_HLCDC_LAYER_ITER2BL |
> + ATMEL_HLCDC_LAYER_ITER |
> + ATMEL_HLCDC_LAYER_GAEN |
> + ATMEL_HLCDC_LAYER_LAEN |
> + ATMEL_HLCDC_LAYER_OVR |
> + ATMEL_HLCDC_LAYER_DMA, cfg);
> +}
> +
> +static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_update_req *req)
> +{
> + u32 cfg;
> + int ret;
> +
> + ret = atmel_hlcdc_format_to_plane_mode(req->fb->pixel_format, &cfg);
> + if (ret)
> + return;
> +
> + if ((req->fb->pixel_format == DRM_FORMAT_YUV422 ||
> + req->fb->pixel_format == DRM_FORMAT_NV61) &&
> + (plane->rotation & (BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270))))
> + cfg |= ATMEL_HLCDC_YUV422ROT;
> +
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + ATMEL_HLCDC_LAYER_FORMAT_CFG_ID,
> + 0xffffffff,
> + cfg);
> +
> + if (req->fb->pixel_format == DRM_FORMAT_RGB888)
> + cfg = ATMEL_HLCDC_LAYER_DMA_ROTDIS;
Can you add a little comment: why Rotation is disabled? ort a /* TODO */
> + else
> + cfg = 0;
> +
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + ATMEL_HLCDC_LAYER_DMA_CFG_ID,
> + ATMEL_HLCDC_LAYER_DMA_ROTDIS, cfg);
> +}
> +
> +static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
> + struct atmel_hlcdc_plane_update_req *req)
> +{
> + struct atmel_hlcdc_layer *layer = &plane->layer;
> + const struct atmel_hlcdc_layer_cfg_layout *layout =
> + &layer->desc->layout;
> + int i;
> +
> + atmel_hlcdc_layer_update_set_fb(&plane->layer, req->fb, req->offsets);
> +
> + for (i = 0; i < req->nplanes; i++) {
> + if (layout->xstride[i]) {
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + layout->xstride[i],
> + 0xffffffff,
> + req->xstride[i]);
> + }
> +
> + if (layout->pstride[i]) {
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + layout->pstride[i],
> + 0xffffffff,
> + req->pstride[i]);
> + }
> + }
> +}
> +
> +static int atmel_hlcdc_plane_check_update_req(struct drm_plane *p,
> + struct atmel_hlcdc_plane_update_req *req)
> +{
> + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> + const struct atmel_hlcdc_layer_cfg_layout *layout =
> + &plane->layer.desc->layout;
> +
> + if (!layout->size &&
> + (req->crtc->mode.crtc_hdisplay != req->crtc_w ||
> + req->crtc->mode.crtc_vdisplay != req->crtc_h))
> + return -EINVAL;
> +
> + if (plane->layer.desc->max_height &&
> + req->crtc_h > plane->layer.desc->max_height)
> + return -EINVAL;
> +
> + if (plane->layer.desc->max_width &&
> + req->crtc_w > plane->layer.desc->max_width)
> + return -EINVAL;
> +
> + if ((req->crtc_h != req->src_h || req->crtc_w != req->src_w) &&
> + (!layout->memsize ||
> + atmel_hlcdc_format_embedds_alpha(req->fb->pixel_format)))
> + return -EINVAL;
> +
> + if (req->crtc_x < 0 || req->crtc_y < 0)
> + return -EINVAL;
> +
> + if (req->crtc_w + req->crtc_x > req->crtc->mode.crtc_hdisplay ||
> + req->crtc_h + req->crtc_y > req->crtc->mode.crtc_vdisplay)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +int atmel_hlcdc_plane_prepare_update_req(struct drm_plane *p,
> + struct atmel_hlcdc_plane_update_req *req)
> +{
> + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> + unsigned int patched_crtc_w;
> + unsigned int patched_crtc_h;
> + unsigned int patched_src_w;
> + unsigned int patched_src_h;
> + unsigned int tmp;
> + int x_offset = 0;
> + int y_offset = 0;
> + int hsub = 1;
> + int vsub = 1;
> + int i;
> +
> + if ((req->src_x | req->src_y | req->src_w | req->src_h) &
> + SUBPIXEL_MASK)
> + return -EINVAL;
> +
> + req->src_x >>= 16;
> + req->src_y >>= 16;
> + req->src_w >>= 16;
> + req->src_h >>= 16;
> +
> + req->nplanes = drm_format_num_planes(req->fb->pixel_format);
> + if (req->nplanes > ATMEL_HLCDC_MAX_PLANES)
> + return -EINVAL;
> +
> + /*
> + * Swap width and size in case of 90 or 270 degrees rotation
> + */
> + if (plane->rotation & (BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270))) {
> + tmp = req->crtc_w;
> + req->crtc_w = req->crtc_h;
> + req->crtc_h = tmp;
> + tmp = req->src_w;
> + req->src_w = req->src_h;
> + req->src_h = tmp;
> + }
> +
> + if (req->crtc_x + req->crtc_w > req->crtc->mode.hdisplay)
> + patched_crtc_w = req->crtc->mode.hdisplay - req->crtc_x;
> + else
> + patched_crtc_w = req->crtc_w;
> +
> + if (req->crtc_x < 0) {
> + patched_crtc_w += req->crtc_x;
> + x_offset = -req->crtc_x;
> + req->crtc_x = 0;
> + }
> +
> + if (req->crtc_y + req->crtc_h > req->crtc->mode.vdisplay)
> + patched_crtc_h = req->crtc->mode.vdisplay - req->crtc_y;
> + else
> + patched_crtc_h = req->crtc_h;
> +
> + if (req->crtc_y < 0) {
> + patched_crtc_h += req->crtc_y;
> + y_offset = -req->crtc_y;
> + req->crtc_y = 0;
> + }
> +
> + patched_src_w = DIV_ROUND_CLOSEST(patched_crtc_w * req->src_w,
> + req->crtc_w);
> + patched_src_h = DIV_ROUND_CLOSEST(patched_crtc_h * req->src_h,
> + req->crtc_h);
> +
> + hsub = drm_format_horz_chroma_subsampling(req->fb->pixel_format);
> + vsub = drm_format_vert_chroma_subsampling(req->fb->pixel_format);
> +
> + for (i = 0; i < req->nplanes; i++) {
> + unsigned int offset = 0;
> + int xdiv = i ? hsub : 1;
> + int ydiv = i ? vsub : 1;
> +
> + req->bpp[i] = drm_format_plane_cpp(req->fb->pixel_format, i);
> + if (!req->bpp[i])
> + return -EINVAL;
> +
> + switch (plane->rotation & 0xf) {
> + case BIT(DRM_ROTATE_90):
> + offset = ((y_offset + req->src_y + patched_src_w - 1) /
> + ydiv) * req->fb->pitches[i];
> + offset += ((x_offset + req->src_x) / xdiv) *
> + req->bpp[i];
> + req->xstride[i] = ((patched_src_w - 1) / ydiv) *
> + req->fb->pitches[i];
> + req->pstride[i] = -req->fb->pitches[i] - req->bpp[i];
> + break;
> + case BIT(DRM_ROTATE_180):
> + offset = ((y_offset + req->src_y + patched_src_h - 1) /
> + ydiv) * req->fb->pitches[i];
> + offset += ((x_offset + req->src_x + patched_src_w - 1) /
> + xdiv) * req->bpp[i];
> + req->xstride[i] = ((((patched_src_w - 1) / xdiv) - 1) *
> + req->bpp[i]) - req->fb->pitches[i];
> + req->pstride[i] = -2 * req->bpp[i];
> + break;
> + case BIT(DRM_ROTATE_270):
> + offset = ((y_offset + req->src_y) / ydiv) *
> + req->fb->pitches[i];
> + offset += ((x_offset + req->src_x + patched_src_h - 1) /
> + xdiv) * req->bpp[i];
> + req->xstride[i] = -(((patched_src_w - 1) / ydiv) *
> + req->fb->pitches[i]) -
> + (2 * req->bpp[i]);
> + req->pstride[i] = req->fb->pitches[i] - req->bpp[i];
> + break;
> + case BIT(DRM_ROTATE_0):
> + default:
> + offset = ((y_offset + req->src_y) / ydiv) *
> + req->fb->pitches[i];
> + offset += ((x_offset + req->src_x) / xdiv) *
> + req->bpp[i];
> + req->xstride[i] = req->fb->pitches[i] -
> + ((patched_src_w / xdiv) *
> + req->bpp[i]);
> + req->pstride[i] = 0;
> + break;
> + }
> +
> + req->offsets[i] = offset + req->fb->offsets[i];
> + }
> +
> + req->src_w = patched_src_w;
> + req->src_h = patched_src_h;
> + req->crtc_w = patched_crtc_w;
> + req->crtc_h = patched_crtc_h;
> +
> + return atmel_hlcdc_plane_check_update_req(p, req);
> +}
> +
> +int atmel_hlcdc_plane_apply_update_req(struct drm_plane *p,
> + struct atmel_hlcdc_plane_update_req *req)
> +{
> + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> + int ret;
> +
> + ret = atmel_hlcdc_layer_update_start(&plane->layer);
> + if (ret)
> + return ret;
> +
> + atmel_hlcdc_plane_update_pos_and_size(plane, req);
> + atmel_hlcdc_plane_update_general_settings(plane, req);
> + atmel_hlcdc_plane_update_format(plane, req);
> + atmel_hlcdc_plane_update_buffers(plane, req);
> +
> + atmel_hlcdc_layer_update_commit(&plane->layer);
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_plane_update(struct drm_plane *p,
> + struct drm_crtc *crtc,
> + struct drm_framebuffer *fb,
> + int crtc_x, int crtc_y,
> + unsigned int crtc_w, unsigned int crtc_h,
> + uint32_t src_x, uint32_t src_y,
> + uint32_t src_w, uint32_t src_h)
> +{
> + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> + struct atmel_hlcdc_plane_update_req req;
> + int ret = 0;
> +
> + memset(&req, 0, sizeof(req));
> + req.crtc_x = crtc_x;
> + req.crtc_y = crtc_y;
> + req.crtc_w = crtc_w;
> + req.crtc_h = crtc_h;
> + req.src_x = src_x;
> + req.src_y = src_y;
> + req.src_w = src_w;
> + req.src_h = src_h;
> + req.fb = fb;
> + req.crtc = crtc;
> +
> + ret = atmel_hlcdc_plane_prepare_update_req(&plane->base, &req);
> + if (ret)
> + return ret;
> +
> + if (!req.crtc_h || !req.crtc_w)
> + return atmel_hlcdc_layer_disable(&plane->layer);
> +
> + return atmel_hlcdc_plane_apply_update_req(&plane->base, &req);
> +}
> +
> +static int atmel_hlcdc_plane_disable(struct drm_plane *p)
> +{
> + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> +
> + return atmel_hlcdc_layer_disable(&plane->layer);
> +}
> +
> +static void atmel_hlcdc_plane_destroy(struct drm_plane *p)
> +{
> + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> +
> + if (plane->base.fb)
> + drm_framebuffer_unreference(plane->base.fb);
> +
> + atmel_hlcdc_layer_cleanup(p->dev, &plane->layer);
> +
> + drm_plane_cleanup(p);
> + devm_kfree(p->dev->dev, plane);
> +}
> +
> +static int atmel_hlcdc_plane_set_alpha(struct atmel_hlcdc_plane *plane,
> + u8 alpha)
> +{
> + atmel_hlcdc_layer_update_start(&plane->layer);
> + atmel_hlcdc_layer_update_cfg(&plane->layer,
> + plane->layer.desc->layout.general_config,
> + ATMEL_HLCDC_LAYER_GA_MASK,
> + alpha << ATMEL_HLCDC_LAYER_GA_SHIFT);
> + atmel_hlcdc_layer_update_commit(&plane->layer);
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_plane_set_rotation(struct atmel_hlcdc_plane *plane,
> + unsigned int rotation)
> +{
> + plane->rotation = rotation;
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_plane_set_property(struct drm_plane *p,
> + struct drm_property *property,
> + uint64_t value)
> +{
> + struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> + struct atmel_hlcdc_plane_properties *props = plane->properties;
> +
> + if (property == props->alpha)
> + atmel_hlcdc_plane_set_alpha(plane, value);
> + else if (property == props->rotation)
> + atmel_hlcdc_plane_set_rotation(plane, value);
> + else
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static void atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane,
> + const struct atmel_hlcdc_layer_desc *desc,
> + struct atmel_hlcdc_plane_properties *props)
> +{
> + struct regmap *regmap = plane->layer.hlcdc->regmap;
> +
> + if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
> + desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
> + drm_object_attach_property(&plane->base.base,
> + props->alpha, 255);
> +
> + /* Set default alpha value */
> + regmap_update_bits(regmap,
> + desc->regs_offset +
> + ATMEL_HLCDC_LAYER_GENERAL_CFG(&plane->layer),
> + ATMEL_HLCDC_LAYER_GA_MASK,
> + ATMEL_HLCDC_LAYER_GA_MASK);
> + }
> +
> + if (desc->layout.xstride && desc->layout.pstride)
> + drm_object_attach_property(&plane->base.base,
> + props->rotation,
> + BIT(DRM_ROTATE_0));
> +
> + if (desc->layout.csc) {
> + /*
> + * TODO: decare a "yuv-to-rgb-conv-factors" property to let
> + * userspace modify these factors (using a BLOB property ?).
> + */
> + regmap_write(regmap,
> + desc->regs_offset +
> + ATMEL_HLCDC_LAYER_CSC_CFG(&plane->layer, 0),
> + 0x4c900091);
> + regmap_write(regmap,
> + desc->regs_offset +
> + ATMEL_HLCDC_LAYER_CSC_CFG(&plane->layer, 1),
> + 0x7a5f5090);
> + regmap_write(regmap,
> + desc->regs_offset +
> + ATMEL_HLCDC_LAYER_CSC_CFG(&plane->layer, 2),
> + 0x40040890);
> + }
> +}
> +
> +static struct drm_plane_funcs layer_plane_funcs = {
> + .update_plane = atmel_hlcdc_plane_update,
> + .disable_plane = atmel_hlcdc_plane_disable,
> + .set_property = atmel_hlcdc_plane_set_property,
> + .destroy = atmel_hlcdc_plane_destroy,
> +};
> +
> +static struct atmel_hlcdc_plane *
> +atmel_hlcdc_plane_create(struct drm_device *dev,
> + const struct atmel_hlcdc_layer_desc *desc,
> + struct atmel_hlcdc_plane_properties *props)
> +{
> + struct atmel_hlcdc_plane *plane;
> + enum drm_plane_type type;
> + int ret;
> +
> + plane = devm_kzalloc(dev->dev, sizeof(*plane), GFP_KERNEL);
> + if (!plane)
> + return ERR_PTR(-ENOMEM);
> +
> + ret = atmel_hlcdc_layer_init(dev, &plane->layer, desc);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + if (desc->type == ATMEL_HLCDC_BASE_LAYER)
> + type = DRM_PLANE_TYPE_PRIMARY;
> + else if (desc->type == ATMEL_HLCDC_CURSOR_LAYER)
> + type = DRM_PLANE_TYPE_CURSOR;
> + else
> + type = DRM_PLANE_TYPE_OVERLAY;
> +
> + ret = drm_universal_plane_init(dev, &plane->base, 0,
> + &layer_plane_funcs,
> + desc->formats->formats,
> + desc->formats->nformats, type);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + /* Set default property values*/
> + atmel_hlcdc_plane_init_properties(plane, desc, props);
> +
> + return plane;
> +}
> +
> +static struct atmel_hlcdc_plane_properties *
> +atmel_hlcdc_plane_create_properties(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_plane_properties *props;
> +
> + props = devm_kzalloc(dev->dev, sizeof(*props), GFP_KERNEL);
> + if (!props)
> + return ERR_PTR(-ENOMEM);
> +
> + props->alpha = drm_property_create_range(dev, 0, "alpha", 0, 255);
> + if (!props->alpha)
> + return ERR_PTR(-ENOMEM);
> +
> + props->rotation = drm_mode_create_rotation_property(dev,
> + BIT(DRM_ROTATE_0) |
> + BIT(DRM_ROTATE_90) |
> + BIT(DRM_ROTATE_180) |
> + BIT(DRM_ROTATE_270));
> + if (!props->rotation)
> + return ERR_PTR(-ENOMEM);
> +
> + return props;
> +}
> +
> +struct atmel_hlcdc_planes *
> +atmel_hlcdc_create_planes(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_dc *dc = dev->dev_private;
> + struct atmel_hlcdc_plane_properties *props;
> + struct atmel_hlcdc_planes *planes;
> + const struct atmel_hlcdc_layer_desc *descs = dc->desc->layers;
> + int nlayers = dc->desc->nlayers;
> + int i;
> +
> + planes = devm_kzalloc(dev->dev, sizeof(*planes), GFP_KERNEL);
> + if (!planes)
> + return ERR_PTR(-ENOMEM);
> +
> + for (i = 0; i < nlayers; i++) {
> + if (descs[i].type == ATMEL_HLCDC_OVERLAY_LAYER)
> + planes->noverlays++;
> + }
> +
> + if (planes->noverlays) {
> + planes->overlays = devm_kzalloc(dev->dev,
> + planes->noverlays *
> + sizeof(*planes->overlays),
> + GFP_KERNEL);
> + if (!planes->overlays)
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + props = atmel_hlcdc_plane_create_properties(dev);
> + if (IS_ERR(props))
> + return ERR_CAST(props);
> +
> + planes->noverlays = 0;
> + for (i = 0; i < nlayers; i++) {
> + struct atmel_hlcdc_plane *plane;
> +
> + if (descs[i].type == ATMEL_HLCDC_PP_LAYER)
> + continue;
> +
> + plane = atmel_hlcdc_plane_create(dev, &descs[i], props);
> + if (IS_ERR(plane))
> + return ERR_CAST(plane);
> +
> + plane->properties = props;
> +
> + switch (descs[i].type) {
> + case ATMEL_HLCDC_BASE_LAYER:
> + if (planes->primary)
> + return ERR_PTR(-EINVAL);
> + planes->primary = plane;
> + break;
> +
> + case ATMEL_HLCDC_OVERLAY_LAYER:
> + planes->overlays[planes->noverlays++] = plane;
> + break;
> +
> + case ATMEL_HLCDC_CURSOR_LAYER:
> + if (planes->cursor)
> + return ERR_PTR(-EINVAL);
> + planes->cursor = plane;
> + break;
> +
> + default:
> + break;
> + }
> + }
> +
> + return planes;
> +}
I'm absolutely not an expert in DRM drivers ;-) but here is my review.
the code is clean and documentation is nice (once updated).
Thanks a lot for your work on this driver!
Once these little things are corected, you can add my:
Acked-by: Nicolas Ferre <nicolas.ferre@...el.com>
On the driver and associated DT binding.
Thanks, bye,
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists