[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <54353CE5.5070808@gmail.com>
Date: Wed, 08 Oct 2014 08:32:21 -0500
From: Dinh Nguyen <dinh.linux@...il.com>
To: Chen-Yu Tsai <wens@...e.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
CC: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Shuge <shuge@...winnertech.com>,
Meng Zhang <kevin@...winnertech.com>,
Gregory CLEMENT <gregory.clement@...e-electrons.com>
Subject: Re: [PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support
On 10/8/14, 8:02 AM, Chen-Yu Tsai wrote:
> The A80 Optimus Board is was launched with the Allwinner A80 SoC.
> It was jointly developed by Allwinner and Merrii.
>
> This board has a UART port, a JTAG connector, USB host ports, a USB
> 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
> 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
> jack, IR receiver, and additional GPIO headers.
>
> This patch adds only basic support.
>
> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++++++++++++++++++++++++++++++
> 2 files changed, 68 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts
>
[...]
> +
> +/dts-v1/;
> +/include/ "sun9i-a80.dtsi"
> +
> +/ {
> + model = "Merrii A80 Optimus Board";
> + compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
"merrii" should be added to vendor-prefixes.txt
Dinh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists