lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 8 Oct 2014 21:41:18 +0800
From:	Chen-Yu Tsai <wens@...e.org>
To:	Dinh Nguyen <dinh.linux@...il.com>
Cc:	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
	devicetree <devicetree@...r.kernel.org>,
	linux-kernel <linux-kernel@...r.kernel.org>,
	Shuge <shuge@...winnertech.com>,
	Meng Zhang <kevin@...winnertech.com>,
	Gregory CLEMENT <gregory.clement@...e-electrons.com>
Subject: Re: [PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support

On Wed, Oct 8, 2014 at 9:32 PM, Dinh Nguyen <dinh.linux@...il.com> wrote:
>
>
> On 10/8/14, 8:02 AM, Chen-Yu Tsai wrote:
>> The A80 Optimus Board is was launched with the Allwinner A80 SoC.
>> It was jointly developed by Allwinner and Merrii.
>>
>> This board has a UART port, a JTAG connector, USB host ports, a USB
>> 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
>> 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
>> jack, IR receiver, and additional GPIO headers.
>>
>> This patch adds only basic support.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
>> ---
>>  arch/arm/boot/dts/Makefile              |  2 +
>>  arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++++++++++++++++++++++++++++++
>>  2 files changed, 68 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts
>>
> [...]
>> +
>> +/dts-v1/;
>> +/include/ "sun9i-a80.dtsi"
>> +
>> +/ {
>> +     model = "Merrii A80 Optimus Board";
>> +     compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
>
> "merrii" should be added to vendor-prefixes.txt

A patch for that was already queued by Maxime.

ChenYu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ