| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20141013023425.GA15452@devel>
Date: Mon, 13 Oct 2014 11:34:25 +0900
From: Daeseok Youn <daeseok.youn@...il.com>
To: lidza.louina@...il.com, markh@...pro.net
Cc: markh@...pro.net, daeseok.youn@...il.com,
gregkh@...uxfoundation.org, driverdev-devel@...uxdriverproject.org,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
dan.carpenter@...cle.com
Subject: [PATCH] staging: dgap: re-arrange functions for removing forward
declarations.
Re-arrange the functions for removing forward declarations.
Signed-off-by: Daeseok Youn <daeseok.youn@...il.com>
---
This patch has too many changes for re-arranging the functions.
So I wonder that I should break this up into smaller patches.
drivers/staging/dgap/dgap.c | 7462 +++++++++++++++++++++----------------------
1 files changed, 3669 insertions(+), 3793 deletions(-)
diff --git a/drivers/staging/dgap/dgap.c b/drivers/staging/dgap/dgap.c
index ad8c8ec..4b78051 100644
--- a/drivers/staging/dgap/dgap.c
+++ b/drivers/staging/dgap/dgap.c
@@ -65,145 +65,6 @@
#include "dgap.h"
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Digi International, http://www.digi.com");
-MODULE_DESCRIPTION("Driver for the Digi International EPCA PCI based product line");
-MODULE_SUPPORTED_DEVICE("dgap");
-
-static int dgap_start(void);
-static void dgap_stop(void);
-static void dgap_init_globals(void);
-static struct board_t *dgap_found_board(struct pci_dev *pdev, int id,
- int boardnum);
-static void dgap_cleanup_board(struct board_t *brd);
-static void dgap_poll_handler(ulong dummy);
-static int dgap_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void dgap_remove_one(struct pci_dev *dev);
-static int dgap_remap(struct board_t *brd);
-static void dgap_unmap(struct board_t *brd);
-static irqreturn_t dgap_intr(int irq, void *voidbrd);
-
-static int dgap_tty_open(struct tty_struct *tty, struct file *file);
-static void dgap_tty_close(struct tty_struct *tty, struct file *file);
-static int dgap_block_til_ready(struct tty_struct *tty, struct file *file,
- struct channel_t *ch);
-static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
- unsigned long arg);
-static int dgap_tty_digigeta(struct channel_t *ch,
- struct digi_t __user *retinfo);
-static int dgap_tty_digiseta(struct channel_t *ch, struct board_t *bd,
- struct un_t *un, struct digi_t __user *new_info);
-static int dgap_tty_digigetedelay(struct tty_struct *tty, int __user *retinfo);
-static int dgap_tty_digisetedelay(struct channel_t *ch, struct board_t *bd,
- struct un_t *un, int __user *new_info);
-static int dgap_tty_write_room(struct tty_struct *tty);
-static int dgap_tty_chars_in_buffer(struct tty_struct *tty);
-static void dgap_tty_start(struct tty_struct *tty);
-static void dgap_tty_stop(struct tty_struct *tty);
-static void dgap_tty_throttle(struct tty_struct *tty);
-static void dgap_tty_unthrottle(struct tty_struct *tty);
-static void dgap_tty_flush_chars(struct tty_struct *tty);
-static void dgap_tty_flush_buffer(struct tty_struct *tty);
-static void dgap_tty_hangup(struct tty_struct *tty);
-static int dgap_wait_for_drain(struct tty_struct *tty);
-static int dgap_set_modem_info(struct channel_t *ch, struct board_t *bd,
- struct un_t *un, unsigned int command,
- unsigned int __user *value);
-static int dgap_get_modem_info(struct channel_t *ch,
- unsigned int __user *value);
-static int dgap_tty_digisetcustombaud(struct channel_t *ch, struct board_t *bd,
- struct un_t *un, int __user *new_info);
-static int dgap_tty_digigetcustombaud(struct channel_t *ch, struct un_t *un,
- int __user *retinfo);
-static int dgap_tty_tiocmget(struct tty_struct *tty);
-static int dgap_tty_tiocmset(struct tty_struct *tty, unsigned int set,
- unsigned int clear);
-static int dgap_tty_send_break(struct tty_struct *tty, int msec);
-static void dgap_tty_wait_until_sent(struct tty_struct *tty, int timeout);
-static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf,
- int count);
-static void dgap_tty_set_termios(struct tty_struct *tty,
- struct ktermios *old_termios);
-static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c);
-static void dgap_tty_send_xchar(struct tty_struct *tty, char ch);
-
-static int dgap_tty_register(struct board_t *brd);
-static void dgap_tty_unregister(struct board_t *brd);
-static int dgap_tty_init(struct board_t *);
-static void dgap_tty_free(struct board_t *);
-static void dgap_cleanup_tty(struct board_t *);
-static void dgap_carrier(struct channel_t *ch);
-static void dgap_input(struct channel_t *ch);
-
-/*
- * Our function prototypes from dgap_fep5
- */
-static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds);
-static int dgap_event(struct board_t *bd);
-
-static void dgap_poll_tasklet(unsigned long data);
-static void dgap_cmdb(struct channel_t *ch, u8 cmd, u8 byte1,
- u8 byte2, uint ncmds);
-static void dgap_cmdw(struct channel_t *ch, u8 cmd, u16 word, uint ncmds);
-static void dgap_wmove(struct channel_t *ch, char *buf, uint cnt);
-static int dgap_param(struct channel_t *ch, struct board_t *bd, u32 un_type);
-static void dgap_parity_scan(struct channel_t *ch, unsigned char *cbuf,
- unsigned char *fbuf, int *len);
-static uint dgap_get_custom_baud(struct channel_t *ch);
-static void dgap_firmware_reset_port(struct channel_t *ch);
-
-/*
- * Function prototypes from dgap_parse.c.
- */
-static int dgap_gettok(char **in);
-static char *dgap_getword(char **in);
-static int dgap_checknode(struct cnode *p);
-
-/*
- * Function prototypes from dgap_sysfs.h
- */
-static void dgap_create_ports_sysfiles(struct board_t *bd);
-static void dgap_remove_ports_sysfiles(struct board_t *bd);
-
-static int dgap_create_driver_sysfiles(struct pci_driver *);
-static void dgap_remove_driver_sysfiles(struct pci_driver *);
-
-static void dgap_create_tty_sysfs(struct un_t *un, struct device *c);
-static void dgap_remove_tty_sysfs(struct device *c);
-
-/*
- * Function prototypes from dgap_parse.h
- */
-static int dgap_parsefile(char **in);
-static struct cnode *dgap_find_config(int type, int bus, int slot);
-static uint dgap_config_get_num_prts(struct board_t *bd);
-static char *dgap_create_config_string(struct board_t *bd, char *string);
-static uint dgap_config_get_useintr(struct board_t *bd);
-static uint dgap_config_get_altpin(struct board_t *bd);
-
-static void dgap_do_bios_load(struct board_t *brd, const u8 *ubios, int len);
-static void dgap_do_fep_load(struct board_t *brd, const u8 *ufep, int len);
-#ifdef DIGI_CONCENTRATORS_SUPPORTED
-static void dgap_do_conc_load(struct board_t *brd, u8 *uaddr, int len);
-#endif
-static int dgap_alloc_flipbuf(struct board_t *brd);
-static void dgap_free_flipbuf(struct board_t *brd);
-static int dgap_request_irq(struct board_t *brd);
-static void dgap_free_irq(struct board_t *brd);
-
-static void dgap_get_vpd(struct board_t *brd);
-static void dgap_do_reset_board(struct board_t *brd);
-static int dgap_test_bios(struct board_t *brd);
-static int dgap_test_fep(struct board_t *brd);
-static int dgap_tty_register_ports(struct board_t *brd);
-static int dgap_firmware_load(struct pci_dev *pdev, int card_type,
- struct board_t *brd);
-static void dgap_cleanup_nodes(void);
-
-static void dgap_cleanup_module(void);
-
-module_exit(dgap_cleanup_module);
-
/*
* File operations permitted on Control/Management major.
*/
@@ -298,13 +159,6 @@ static struct board_id dgap_ids[] = {
{0,} /* 0 terminated list. */
};
-static struct pci_driver dgap_driver = {
- .name = "dgap",
- .probe = dgap_init_one,
- .id_table = dgap_pci_tbl,
- .remove = dgap_remove_one,
-};
-
struct firmware_info {
u8 *conf_name; /* dgap.conf */
u8 *bios_name; /* BIOS filename */
@@ -367,29 +221,6 @@ static struct ktermios dgap_default_termios = {
.c_line = 0,
};
-static const struct tty_operations dgap_tty_ops = {
- .open = dgap_tty_open,
- .close = dgap_tty_close,
- .write = dgap_tty_write,
- .write_room = dgap_tty_write_room,
- .flush_buffer = dgap_tty_flush_buffer,
- .chars_in_buffer = dgap_tty_chars_in_buffer,
- .flush_chars = dgap_tty_flush_chars,
- .ioctl = dgap_tty_ioctl,
- .set_termios = dgap_tty_set_termios,
- .stop = dgap_tty_stop,
- .start = dgap_tty_start,
- .throttle = dgap_tty_throttle,
- .unthrottle = dgap_tty_unthrottle,
- .hangup = dgap_tty_hangup,
- .put_char = dgap_tty_put_char,
- .tiocmget = dgap_tty_tiocmget,
- .tiocmset = dgap_tty_tiocmset,
- .break_ctl = dgap_tty_send_break,
- .wait_until_sent = dgap_tty_wait_until_sent,
- .send_xchar = dgap_tty_send_xchar
-};
-
/*
* Our needed internal static variables from dgap_parse.c
*/
@@ -457,1089 +288,1226 @@ static struct toklist dgap_tlist[] = {
{ 0, NULL }
};
-/************************************************************************
- *
- * Driver load/unload functions
- *
- ************************************************************************/
/*
- * init_module()
- *
- * Module load. This is where it all starts.
+ * dgap_sindex: much like index(), but it looks for a match of any character in
+ * the group, and returns that position. If the first character is a ^, then
+ * this will match the first occurrence not in that group.
*/
-static int dgap_init_module(void)
+static char *dgap_sindex(char *string, char *group)
{
- int rc;
-
- pr_info("%s, Digi International Part Number %s\n", DG_NAME, DG_PART);
-
- rc = dgap_start();
- if (rc)
- return rc;
-
- rc = pci_register_driver(&dgap_driver);
- if (rc)
- goto err_stop;
-
- rc = dgap_create_driver_sysfiles(&dgap_driver);
- if (rc)
- goto err_unregister;
-
- dgap_driver_state = DRIVER_READY;
+ char *ptr;
- return 0;
+ if (!string || !group)
+ return (char *) NULL;
-err_unregister:
- pci_unregister_driver(&dgap_driver);
-err_stop:
- dgap_stop();
+ if (*group == '^') {
+ group++;
+ for (; *string; string++) {
+ for (ptr = group; *ptr; ptr++) {
+ if (*ptr == *string)
+ break;
+ }
+ if (*ptr == '\0')
+ return string;
+ }
+ } else {
+ for (; *string; string++) {
+ for (ptr = group; *ptr; ptr++) {
+ if (*ptr == *string)
+ return string;
+ }
+ }
+ }
- return rc;
+ return (char *) NULL;
}
-module_init(dgap_init_module);
/*
- * Start of driver.
+ * get a word from the input stream, also keep track of current line number.
+ * words are separated by whitespace.
*/
-static int dgap_start(void)
+static char *dgap_getword(char **in)
{
- int rc;
- unsigned long flags;
- struct device *device;
-
- /*
- * make sure that the globals are
- * init'd before we do anything else
- */
- dgap_init_globals();
-
- dgap_numboards = 0;
+ char *ret_ptr = *in;
- pr_info("For the tools package please visit http://www.digi.com\n");
+ char *ptr = dgap_sindex(*in, " \t\n");
- /*
- * Register our base character device into the kernel.
- */
+ /* If no word found, return null */
+ if (!ptr)
+ return NULL;
- /*
- * Register management/dpa devices
- */
- rc = register_chrdev(DIGI_DGAP_MAJOR, "dgap", &dgap_board_fops);
- if (rc < 0)
- return rc;
+ /* Mark new location for our buffer */
+ *ptr = '\0';
+ *in = ptr + 1;
- dgap_class = class_create(THIS_MODULE, "dgap_mgmt");
- if (IS_ERR(dgap_class)) {
- rc = PTR_ERR(dgap_class);
- goto failed_class;
+ /* Eat any extra spaces/tabs/newlines that might be present */
+ while (*in && **in && ((**in == ' ') ||
+ (**in == '\t') ||
+ (**in == '\n'))) {
+ **in = '\0';
+ *in = *in + 1;
}
- device = device_create(dgap_class, NULL,
- MKDEV(DIGI_DGAP_MAJOR, 0),
- NULL, "dgap_mgmt");
- if (IS_ERR(device)) {
- rc = PTR_ERR(device);
- goto failed_device;
- }
+ return ret_ptr;
+}
- /* Start the poller */
- spin_lock_irqsave(&dgap_poll_lock, flags);
- init_timer(&dgap_poll_timer);
- dgap_poll_timer.function = dgap_poll_handler;
- dgap_poll_timer.data = 0;
- dgap_poll_time = jiffies + dgap_jiffies_from_ms(dgap_poll_tick);
- dgap_poll_timer.expires = dgap_poll_time;
- spin_unlock_irqrestore(&dgap_poll_lock, flags);
- add_timer(&dgap_poll_timer);
+/*
+ * Get a token from the input file; return 0 if end of file is reached
+ */
+static int dgap_gettok(char **in)
+{
+ char *w;
+ struct toklist *t;
- return rc;
+ if (strstr(dgap_cword, "board")) {
+ w = dgap_getword(in);
+ snprintf(dgap_cword, MAXCWORD, "%s", w);
+ for (t = dgap_brdtype; t->token != 0; t++) {
+ if (!strcmp(w, t->string))
+ return t->token;
+ }
+ } else {
+ while ((w = dgap_getword(in))) {
+ snprintf(dgap_cword, MAXCWORD, "%s", w);
+ for (t = dgap_tlist; t->token != 0; t++) {
+ if (!strcmp(w, t->string))
+ return t->token;
+ }
+ }
+ }
-failed_device:
- class_destroy(dgap_class);
-failed_class:
- unregister_chrdev(DIGI_DGAP_MAJOR, "dgap");
- return rc;
+ return 0;
}
-static void dgap_stop(void)
+/*
+ * dgap_checknode: see if all the necessary info has been supplied for a node
+ * before creating the next node.
+ */
+static int dgap_checknode(struct cnode *p)
{
- unsigned long lock_flags;
-
- spin_lock_irqsave(&dgap_poll_lock, lock_flags);
- dgap_poll_stop = 1;
- spin_unlock_irqrestore(&dgap_poll_lock, lock_flags);
+ switch (p->type) {
+ case LNODE:
+ if (p->u.line.v_speed == 0) {
+ pr_err("line speed not specified");
+ return 1;
+ }
+ return 0;
- del_timer_sync(&dgap_poll_timer);
+ case CNODE:
+ if (p->u.conc.v_speed == 0) {
+ pr_err("concentrator line speed not specified");
+ return 1;
+ }
+ if (p->u.conc.v_nport == 0) {
+ pr_err("number of ports on concentrator not specified");
+ return 1;
+ }
+ if (p->u.conc.v_id == 0) {
+ pr_err("concentrator id letter not specified");
+ return 1;
+ }
+ return 0;
- device_destroy(dgap_class, MKDEV(DIGI_DGAP_MAJOR, 0));
- class_destroy(dgap_class);
- unregister_chrdev(DIGI_DGAP_MAJOR, "dgap");
+ case MNODE:
+ if (p->u.module.v_nport == 0) {
+ pr_err("number of ports on EBI module not specified");
+ return 1;
+ }
+ if (p->u.module.v_id == 0) {
+ pr_err("EBI module id letter not specified");
+ return 1;
+ }
+ return 0;
+ }
+ return 0;
}
-static int dgap_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+/*
+ * Given a board pointer, returns whether we should use interrupts or not.
+ */
+static uint dgap_config_get_useintr(struct board_t *bd)
{
- int rc;
- struct board_t *brd;
-
- if (dgap_numboards >= MAXBOARDS)
- return -EPERM;
-
- rc = pci_enable_device(pdev);
- if (rc)
- return -EIO;
-
- brd = dgap_found_board(pdev, ent->driver_data, dgap_numboards);
- if (IS_ERR(brd))
- return PTR_ERR(brd);
-
- rc = dgap_firmware_load(pdev, ent->driver_data, brd);
- if (rc)
- goto cleanup_brd;
-
- rc = dgap_alloc_flipbuf(brd);
- if (rc)
- goto cleanup_brd;
-
- rc = dgap_tty_register(brd);
- if (rc)
- goto free_flipbuf;
-
- rc = dgap_request_irq(brd);
- if (rc)
- goto unregister_tty;
-
- /*
- * Do tty device initialization.
- */
- rc = dgap_tty_init(brd);
- if (rc < 0)
- goto free_irq;
-
- rc = dgap_tty_register_ports(brd);
- if (rc)
- goto tty_free;
+ struct cnode *p;
- brd->state = BOARD_READY;
- brd->dpastatus = BD_RUNNING;
+ if (!bd)
+ return 0;
- dgap_board[dgap_numboards++] = brd;
+ for (p = bd->bd_config; p; p = p->next) {
+ if (p->type == INTRNODE) {
+ /*
+ * check for pcxr types.
+ */
+ return p->u.useintr;
+ }
+ }
+ /* If not found, then don't turn on interrupts. */
return 0;
-
-tty_free:
- dgap_tty_free(brd);
-free_irq:
- dgap_free_irq(brd);
-unregister_tty:
- dgap_tty_unregister(brd);
-free_flipbuf:
- dgap_free_flipbuf(brd);
-cleanup_brd:
- dgap_cleanup_nodes();
- dgap_unmap(brd);
- kfree(brd);
-
- return rc;
-}
-
-static void dgap_remove_one(struct pci_dev *dev)
-{
- /* Do Nothing */
}
/*
- * dgap_cleanup_module()
- *
- * Module unload. This is where it all ends.
+ * Given a board pointer, returns whether we turn on altpin or not.
*/
-static void dgap_cleanup_module(void)
+static uint dgap_config_get_altpin(struct board_t *bd)
{
- int i;
- ulong lock_flags;
-
- spin_lock_irqsave(&dgap_poll_lock, lock_flags);
- dgap_poll_stop = 1;
- spin_unlock_irqrestore(&dgap_poll_lock, lock_flags);
-
- /* Turn off poller right away. */
- del_timer_sync(&dgap_poll_timer);
-
- dgap_remove_driver_sysfiles(&dgap_driver);
+ struct cnode *p;
- device_destroy(dgap_class, MKDEV(DIGI_DGAP_MAJOR, 0));
- class_destroy(dgap_class);
- unregister_chrdev(DIGI_DGAP_MAJOR, "dgap");
+ if (!bd)
+ return 0;
- for (i = 0; i < dgap_numboards; ++i) {
- dgap_remove_ports_sysfiles(dgap_board[i]);
- dgap_cleanup_tty(dgap_board[i]);
- dgap_cleanup_board(dgap_board[i]);
+ for (p = bd->bd_config; p; p = p->next) {
+ if (p->type == ANODE) {
+ /*
+ * check for pcxr types.
+ */
+ return p->u.altpin;
+ }
}
- dgap_cleanup_nodes();
-
- if (dgap_numboards)
- pci_unregister_driver(&dgap_driver);
+ /* If not found, then don't turn on interrupts. */
+ return 0;
}
/*
- * dgap_cleanup_board()
- *
- * Free all the memory associated with a board
+ * Given a specific type of board, if found, detached link and
+ * returns the first occurrence in the list.
*/
-static void dgap_cleanup_board(struct board_t *brd)
+static struct cnode *dgap_find_config(int type, int bus, int slot)
{
- int i;
+ struct cnode *p, *prev, *prev2, *found;
- if (!brd || brd->magic != DGAP_BOARD_MAGIC)
- return;
+ p = &dgap_head;
- dgap_free_irq(brd);
+ while (p->next) {
+ prev = p;
+ p = p->next;
- tasklet_kill(&brd->helper_tasklet);
+ if (p->type != BNODE)
+ continue;
- dgap_unmap(brd);
+ if (p->u.board.type != type)
+ continue;
- /* Free all allocated channels structs */
- for (i = 0; i < MAXPORTS ; i++)
- kfree(brd->channels[i]);
+ if (p->u.board.v_pcibus &&
+ p->u.board.pcibus != bus)
+ continue;
- kfree(brd->flipbuf);
- kfree(brd->flipflagbuf);
+ if (p->u.board.v_pcislot &&
+ p->u.board.pcislot != slot)
+ continue;
- dgap_board[brd->boardnum] = NULL;
+ found = p;
+ /*
+ * Keep walking thru the list till we
+ * find the next board.
+ */
+ while (p->next) {
+ prev2 = p;
+ p = p->next;
- kfree(brd);
+ if (p->type != BNODE)
+ continue;
+
+ /*
+ * Mark the end of our 1 board
+ * chain of configs.
+ */
+ prev2->next = NULL;
+
+ /*
+ * Link the "next" board to the
+ * previous board, effectively
+ * "unlinking" our board from
+ * the main config.
+ */
+ prev->next = p;
+
+ return found;
+ }
+ /*
+ * It must be the last board in the list.
+ */
+ prev->next = NULL;
+ return found;
+ }
+ return NULL;
}
/*
- * dgap_found_board()
- *
- * A board has been found, init it.
+ * Given a board pointer, walks the config link, counting up
+ * all ports user specified should be on the board.
+ * (This does NOT mean they are all actually present right now tho)
*/
-static struct board_t *dgap_found_board(struct pci_dev *pdev, int id,
- int boardnum)
+static uint dgap_config_get_num_prts(struct board_t *bd)
{
- struct board_t *brd;
- unsigned int pci_irq;
- int i;
- int ret;
-
- /* get the board structure and prep it */
- brd = kzalloc(sizeof(struct board_t), GFP_KERNEL);
- if (!brd)
- return ERR_PTR(-ENOMEM);
-
- /* store the info for the board we've found */
- brd->magic = DGAP_BOARD_MAGIC;
- brd->boardnum = boardnum;
- brd->vendor = dgap_pci_tbl[id].vendor;
- brd->device = dgap_pci_tbl[id].device;
- brd->pdev = pdev;
- brd->pci_bus = pdev->bus->number;
- brd->pci_slot = PCI_SLOT(pdev->devfn);
- brd->name = dgap_ids[id].name;
- brd->maxports = dgap_ids[id].maxports;
- brd->type = dgap_ids[id].config_type;
- brd->dpatype = dgap_ids[id].dpatype;
- brd->dpastatus = BD_NOFEP;
- init_waitqueue_head(&brd->state_wait);
+ int count = 0;
+ struct cnode *p;
- spin_lock_init(&brd->bd_lock);
+ if (!bd)
+ return 0;
- brd->inhibit_poller = FALSE;
- brd->wait_for_bios = 0;
- brd->wait_for_fep = 0;
+ for (p = bd->bd_config; p; p = p->next) {
- for (i = 0; i < MAXPORTS; i++)
- brd->channels[i] = NULL;
+ switch (p->type) {
+ case BNODE:
+ /*
+ * check for pcxr types.
+ */
+ if (p->u.board.type > EPCFE)
+ count += p->u.board.nport;
+ break;
+ case CNODE:
+ count += p->u.conc.nport;
+ break;
+ case MNODE:
+ count += p->u.module.nport;
+ break;
+ }
+ }
+ return count;
+}
- /* store which card & revision we have */
- pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &brd->subvendor);
- pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &brd->subdevice);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev);
+static char *dgap_create_config_string(struct board_t *bd, char *string)
+{
+ char *ptr = string;
+ struct cnode *p;
+ struct cnode *q;
+ int speed;
- pci_irq = pdev->irq;
- brd->irq = pci_irq;
+ if (!bd) {
+ *ptr = 0xff;
+ return string;
+ }
- /* get the PCI Base Address Registers */
+ for (p = bd->bd_config; p; p = p->next) {
- /* Xr Jupiter and EPC use BAR 2 */
- if (brd->device == PCI_DEV_XRJ_DID || brd->device == PCI_DEV_EPCJ_DID) {
- brd->membase = pci_resource_start(pdev, 2);
- brd->membase_end = pci_resource_end(pdev, 2);
- }
- /* Everyone else uses BAR 0 */
- else {
- brd->membase = pci_resource_start(pdev, 0);
- brd->membase_end = pci_resource_end(pdev, 0);
- }
+ switch (p->type) {
+ case LNODE:
+ *ptr = '\0';
+ ptr++;
+ *ptr = p->u.line.speed;
+ ptr++;
+ break;
+ case CNODE:
+ /*
+ * Because the EPC/con concentrators can have EM modules
+ * hanging off of them, we have to walk ahead in the
+ * list and keep adding the number of ports on each EM
+ * to the config. UGH!
+ */
+ speed = p->u.conc.speed;
+ q = p->next;
+ if (q && (q->type == MNODE)) {
+ *ptr = (p->u.conc.nport + 0x80);
+ ptr++;
+ p = q;
+ while (q->next && (q->next->type) == MNODE) {
+ *ptr = (q->u.module.nport + 0x80);
+ ptr++;
+ p = q;
+ q = q->next;
+ }
+ *ptr = q->u.module.nport;
+ ptr++;
+ } else {
+ *ptr = p->u.conc.nport;
+ ptr++;
+ }
- if (!brd->membase) {
- ret = -ENODEV;
- goto free_brd;
+ *ptr = speed;
+ ptr++;
+ break;
+ }
}
- if (brd->membase & 1)
- brd->membase &= ~3;
- else
- brd->membase &= ~15;
-
- /*
- * On the PCI boards, there is no IO space allocated
- * The I/O registers will be in the first 3 bytes of the
- * upper 2MB of the 4MB memory space. The board memory
- * will be mapped into the low 2MB of the 4MB memory space
- */
- brd->port = brd->membase + PCI_IO_OFFSET;
- brd->port_end = brd->port + PCI_IO_SIZE;
+ *ptr = 0xff;
+ return string;
+}
- /*
- * Special initialization for non-PLX boards
- */
- if (brd->device != PCI_DEV_XRJ_DID && brd->device != PCI_DEV_EPCJ_DID) {
- unsigned short cmd;
+/*
+ * Parse a configuration file read into memory as a string.
+ */
+static int dgap_parsefile(char **in)
+{
+ struct cnode *p, *brd, *line, *conc;
+ int rc;
+ char *s;
+ int linecnt = 0;
- pci_write_config_byte(pdev, 0x40, 0);
- pci_write_config_byte(pdev, 0x46, 0);
+ p = &dgap_head;
+ brd = line = conc = NULL;
- /* Limit burst length to 2 doubleword transactions */
- pci_write_config_byte(pdev, 0x42, 1);
+ /* perhaps we are adding to an existing list? */
+ while (p->next)
+ p = p->next;
- /*
- * Enable IO and mem if not already done.
- * This was needed for support on Itanium.
- */
- pci_read_config_word(pdev, PCI_COMMAND, &cmd);
- cmd |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
- pci_write_config_word(pdev, PCI_COMMAND, cmd);
+ /* file must start with a BEGIN */
+ while ((rc = dgap_gettok(in)) != BEGIN) {
+ if (rc == 0) {
+ pr_err("unexpected EOF");
+ return -1;
+ }
}
- /* init our poll helper tasklet */
- tasklet_init(&brd->helper_tasklet, dgap_poll_tasklet,
- (unsigned long) brd);
+ for (; ;) {
+ int board_type = 0;
+ int conc_type = 0;
+ int module_type = 0;
- ret = dgap_remap(brd);
- if (ret)
- goto free_brd;
+ rc = dgap_gettok(in);
+ if (rc == 0) {
+ pr_err("unexpected EOF");
+ return -1;
+ }
- pr_info("dgap: board %d: %s (rev %d), irq %ld\n",
- boardnum, brd->name, brd->rev, brd->irq);
+ switch (rc) {
+ case BEGIN: /* should only be 1 begin */
+ pr_err("unexpected config_begin\n");
+ return -1;
- return brd;
+ case END:
+ return 0;
-free_brd:
- kfree(brd);
+ case BOARD: /* board info */
+ if (dgap_checknode(p))
+ return -1;
- return ERR_PTR(ret);
-}
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
+ p = p->next;
-static int dgap_request_irq(struct board_t *brd)
-{
- int rc;
+ p->type = BNODE;
+ p->u.board.status = kstrdup("No", GFP_KERNEL);
+ line = conc = NULL;
+ brd = p;
+ linecnt = -1;
- if (!brd || brd->magic != DGAP_BOARD_MAGIC)
- return -ENODEV;
+ board_type = dgap_gettok(in);
+ if (board_type == 0) {
+ pr_err("board !!type not specified");
+ return -1;
+ }
- /*
- * Set up our interrupt handler if we are set to do interrupts.
- */
- if (dgap_config_get_useintr(brd) && brd->irq) {
+ p->u.board.type = board_type;
- rc = request_irq(brd->irq, dgap_intr, IRQF_SHARED, "DGAP", brd);
+ break;
- if (!rc)
- brd->intr_used = 1;
- }
- return 0;
-}
+ case IO: /* i/o port */
+ if (p->type != BNODE) {
+ pr_err("IO port only vaild for boards");
+ return -1;
+ }
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ p->u.board.portstr = kstrdup(s, GFP_KERNEL);
+ if (kstrtol(s, 0, &p->u.board.port)) {
+ pr_err("bad number for IO port");
+ return -1;
+ }
+ p->u.board.v_port = 1;
+ break;
-static void dgap_free_irq(struct board_t *brd)
-{
- if (brd->intr_used && brd->irq)
- free_irq(brd->irq, brd);
-}
+ case MEM: /* memory address */
+ if (p->type != BNODE) {
+ pr_err("memory address only vaild for boards");
+ return -1;
+ }
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ p->u.board.addrstr = kstrdup(s, GFP_KERNEL);
+ if (kstrtoul(s, 0, &p->u.board.addr)) {
+ pr_err("bad number for memory address");
+ return -1;
+ }
+ p->u.board.v_addr = 1;
+ break;
-static int dgap_firmware_load(struct pci_dev *pdev, int card_type,
- struct board_t *brd)
-{
- const struct firmware *fw;
- char *tmp_ptr;
- int ret;
- char *dgap_config_buf;
+ case PCIINFO: /* pci information */
+ if (p->type != BNODE) {
+ pr_err("memory address only vaild for boards");
+ return -1;
+ }
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ p->u.board.pcibusstr = kstrdup(s, GFP_KERNEL);
+ if (kstrtoul(s, 0, &p->u.board.pcibus)) {
+ pr_err("bad number for pci bus");
+ return -1;
+ }
+ p->u.board.v_pcibus = 1;
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ p->u.board.pcislotstr = kstrdup(s, GFP_KERNEL);
+ if (kstrtoul(s, 0, &p->u.board.pcislot)) {
+ pr_err("bad number for pci slot");
+ return -1;
+ }
+ p->u.board.v_pcislot = 1;
+ break;
- dgap_get_vpd(brd);
- dgap_do_reset_board(brd);
+ case METHOD:
+ if (p->type != BNODE) {
+ pr_err("install method only vaild for boards");
+ return -1;
+ }
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ p->u.board.method = kstrdup(s, GFP_KERNEL);
+ p->u.board.v_method = 1;
+ break;
- if (fw_info[card_type].conf_name) {
- ret = request_firmware(&fw, fw_info[card_type].conf_name,
- &pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "config file %s not found\n",
- fw_info[card_type].conf_name);
- return ret;
- }
+ case STATUS:
+ if (p->type != BNODE) {
+ pr_err("config status only vaild for boards");
+ return -1;
+ }
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ p->u.board.status = kstrdup(s, GFP_KERNEL);
+ break;
- dgap_config_buf = kzalloc(fw->size + 1, GFP_KERNEL);
- if (!dgap_config_buf) {
- release_firmware(fw);
- return -ENOMEM;
- }
+ case NPORTS: /* number of ports */
+ if (p->type == BNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.board.nport)) {
+ pr_err("bad number for number of ports");
+ return -1;
+ }
+ p->u.board.v_nport = 1;
+ } else if (p->type == CNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.conc.nport)) {
+ pr_err("bad number for number of ports");
+ return -1;
+ }
+ p->u.conc.v_nport = 1;
+ } else if (p->type == MNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.module.nport)) {
+ pr_err("bad number for number of ports");
+ return -1;
+ }
+ p->u.module.v_nport = 1;
+ } else {
+ pr_err("nports only valid for concentrators or modules");
+ return -1;
+ }
+ break;
- memcpy(dgap_config_buf, fw->data, fw->size);
- release_firmware(fw);
+ case ID: /* letter ID used in tty name */
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
- /*
- * preserve dgap_config_buf
- * as dgap_parsefile would
- * otherwise alter it.
- */
- tmp_ptr = dgap_config_buf;
+ p->u.board.status = kstrdup(s, GFP_KERNEL);
- if (dgap_parsefile(&tmp_ptr) != 0) {
- kfree(dgap_config_buf);
- return -EINVAL;
- }
- kfree(dgap_config_buf);
- }
+ if (p->type == CNODE) {
+ p->u.conc.id = kstrdup(s, GFP_KERNEL);
+ p->u.conc.v_id = 1;
+ } else if (p->type == MNODE) {
+ p->u.module.id = kstrdup(s, GFP_KERNEL);
+ p->u.module.v_id = 1;
+ } else {
+ pr_err("id only valid for concentrators or modules");
+ return -1;
+ }
+ break;
- /*
- * Match this board to a config the user created for us.
- */
- brd->bd_config =
- dgap_find_config(brd->type, brd->pci_bus, brd->pci_slot);
+ case STARTO: /* start offset of ID */
+ if (p->type == BNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.board.start)) {
+ pr_err("bad number for start of tty count");
+ return -1;
+ }
+ p->u.board.v_start = 1;
+ } else if (p->type == CNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.conc.start)) {
+ pr_err("bad number for start of tty count");
+ return -1;
+ }
+ p->u.conc.v_start = 1;
+ } else if (p->type == MNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.module.start)) {
+ pr_err("bad number for start of tty count");
+ return -1;
+ }
+ p->u.module.v_start = 1;
+ } else {
+ pr_err("start only valid for concentrators or modules");
+ return -1;
+ }
+ break;
- /*
- * Because the 4 port Xr products share the same PCI ID
- * as the 8 port Xr products, if we receive a NULL config
- * back, and this is a PAPORT8 board, retry with a
- * PAPORT4 attempt as well.
- */
- if (brd->type == PAPORT8 && !brd->bd_config)
- brd->bd_config =
- dgap_find_config(PAPORT4, brd->pci_bus, brd->pci_slot);
+ case TTYN: /* tty name prefix */
+ if (dgap_checknode(p))
+ return -1;
- if (!brd->bd_config) {
- dev_err(&pdev->dev, "No valid configuration found\n");
- return -EINVAL;
- }
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- if (fw_info[card_type].bios_name) {
- ret = request_firmware(&fw, fw_info[card_type].bios_name,
- &pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "bios file %s not found\n",
- fw_info[card_type].bios_name);
- return ret;
- }
- dgap_do_bios_load(brd, fw->data, fw->size);
- release_firmware(fw);
+ p = p->next;
+ p->type = TNODE;
- /* Wait for BIOS to test board... */
- ret = dgap_test_bios(brd);
- if (ret)
- return ret;
- }
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpeced end of file");
+ return -1;
+ }
+ p->u.ttyname = kstrdup(s, GFP_KERNEL);
+ if (!p->u.ttyname)
+ return -1;
- if (fw_info[card_type].fep_name) {
- ret = request_firmware(&fw, fw_info[card_type].fep_name,
- &pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "dgap: fep file %s not found\n",
- fw_info[card_type].fep_name);
- return ret;
- }
- dgap_do_fep_load(brd, fw->data, fw->size);
- release_firmware(fw);
+ break;
- /* Wait for FEP to load on board... */
- ret = dgap_test_fep(brd);
- if (ret)
- return ret;
- }
+ case CU: /* cu name prefix */
+ if (dgap_checknode(p))
+ return -1;
-#ifdef DIGI_CONCENTRATORS_SUPPORTED
- /*
- * If this is a CX or EPCX, we need to see if the firmware
- * is requesting a concentrator image from us.
- */
- if ((bd->type == PCX) || (bd->type == PEPC)) {
- chk_addr = (u16 *) (vaddr + DOWNREQ);
- /* Nonzero if FEP is requesting concentrator image. */
- check = readw(chk_addr);
- vaddr = brd->re_map_membase;
- }
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- if (fw_info[card_type].con_name && check && vaddr) {
- ret = request_firmware(&fw, fw_info[card_type].con_name,
- &pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "conc file %s not found\n",
- fw_info[card_type].con_name);
- return ret;
- }
- /* Put concentrator firmware loading code here */
- offset = readw((u16 *) (vaddr + DOWNREQ));
- memcpy_toio(offset, fw->data, fw->size);
+ p = p->next;
+ p->type = CUNODE;
- dgap_do_conc_load(brd, (char *)fw->data, fw->size)
- release_firmware(fw);
- }
-#endif
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpeced end of file");
+ return -1;
+ }
+ p->u.cuname = kstrdup(s, GFP_KERNEL);
+ if (!p->u.cuname)
+ return -1;
- return 0;
-}
+ break;
-/*
- * Remap PCI memory.
- */
-static int dgap_remap(struct board_t *brd)
-{
- if (!brd || brd->magic != DGAP_BOARD_MAGIC)
- return -EIO;
+ case LINE: /* line information */
+ if (dgap_checknode(p))
+ return -1;
+ if (!brd) {
+ pr_err("must specify board before line info");
+ return -1;
+ }
+ switch (brd->u.board.type) {
+ case PPCM:
+ pr_err("line not vaild for PC/em");
+ return -1;
+ }
- if (!request_mem_region(brd->membase, 0x200000, "dgap"))
- return -ENOMEM;
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- if (!request_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000,
- "dgap")) {
- release_mem_region(brd->membase, 0x200000);
- return -ENOMEM;
- }
+ p = p->next;
+ p->type = LNODE;
+ conc = NULL;
+ line = p;
+ linecnt++;
+ break;
- brd->re_map_membase = ioremap(brd->membase, 0x200000);
- if (!brd->re_map_membase) {
- release_mem_region(brd->membase, 0x200000);
- release_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000);
- return -ENOMEM;
- }
+ case CONC: /* concentrator information */
+ if (dgap_checknode(p))
+ return -1;
+ if (!line) {
+ pr_err("must specify line info before concentrator");
+ return -1;
+ }
- brd->re_map_port = ioremap((brd->membase + PCI_IO_OFFSET), 0x200000);
- if (!brd->re_map_port) {
- release_mem_region(brd->membase, 0x200000);
- release_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000);
- iounmap(brd->re_map_membase);
- return -ENOMEM;
- }
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- return 0;
-}
+ p = p->next;
+ p->type = CNODE;
+ conc = p;
-static void dgap_unmap(struct board_t *brd)
-{
- iounmap(brd->re_map_port);
- iounmap(brd->re_map_membase);
- release_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000);
- release_mem_region(brd->membase, 0x200000);
-}
-/*****************************************************************************
-*
-* Function:
-*
-* dgap_poll_handler
-*
-* Author:
-*
-* Scott H Kilau
-*
-* Parameters:
-*
-* dummy -- ignored
-*
-* Return Values:
-*
-* none
-*
-* Description:
-*
-* As each timer expires, it determines (a) whether the "transmit"
-* waiter needs to be woken up, and (b) whether the poller needs to
-* be rescheduled.
-*
-******************************************************************************/
+ if (linecnt)
+ brd->u.board.conc2++;
+ else
+ brd->u.board.conc1++;
-static void dgap_poll_handler(ulong dummy)
-{
- int i;
- struct board_t *brd;
- unsigned long lock_flags;
- ulong new_time;
+ conc_type = dgap_gettok(in);
+ if (conc_type == 0 || conc_type != CX ||
+ conc_type != EPC) {
+ pr_err("failed to set a type of concentratros");
+ return -1;
+ }
- dgap_poll_counter++;
+ p->u.conc.type = conc_type;
- /*
- * Do not start the board state machine until
- * driver tells us its up and running, and has
- * everything it needs.
- */
- if (dgap_driver_state != DRIVER_READY)
- goto schedule_poller;
+ break;
- /*
- * If we have just 1 board, or the system is not SMP,
- * then use the typical old style poller.
- * Otherwise, use our new tasklet based poller, which should
- * speed things up for multiple boards.
- */
- if ((dgap_numboards == 1) || (num_online_cpus() <= 1)) {
- for (i = 0; i < dgap_numboards; i++) {
+ case MOD: /* EBI module */
+ if (dgap_checknode(p))
+ return -1;
+ if (!brd) {
+ pr_err("must specify board info before EBI modules");
+ return -1;
+ }
+ switch (brd->u.board.type) {
+ case PPCM:
+ linecnt = 0;
+ break;
+ default:
+ if (!conc) {
+ pr_err("must specify concentrator info before EBI module");
+ return -1;
+ }
+ }
- brd = dgap_board[i];
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- if (brd->state == BOARD_FAILED)
- continue;
- if (!brd->intr_running)
- /* Call the real board poller directly */
- dgap_poll_tasklet((unsigned long) brd);
- }
- } else {
- /*
- * Go thru each board, kicking off a
- * tasklet for each if needed
- */
- for (i = 0; i < dgap_numboards; i++) {
- brd = dgap_board[i];
+ p = p->next;
+ p->type = MNODE;
- /*
- * Attempt to grab the board lock.
- *
- * If we can't get it, no big deal, the next poll
- * will get it. Basically, I just really don't want
- * to spin in here, because I want to kick off my
- * tasklets as fast as I can, and then get out the
- * poller.
- */
- if (!spin_trylock(&brd->bd_lock))
- continue;
+ if (linecnt)
+ brd->u.board.module2++;
+ else
+ brd->u.board.module1++;
- /*
- * If board is in a failed state, don't bother
- * scheduling a tasklet
- */
- if (brd->state == BOARD_FAILED) {
- spin_unlock(&brd->bd_lock);
- continue;
+ module_type = dgap_gettok(in);
+ if (module_type == 0 || module_type != PORTS ||
+ module_type != MODEM) {
+ pr_err("failed to set a type of module");
+ return -1;
}
- /* Schedule a poll helper task */
- if (!brd->intr_running)
- tasklet_schedule(&brd->helper_tasklet);
-
- /*
- * Can't do DGAP_UNLOCK here, as we don't have
- * lock_flags because we did a trylock above.
- */
- spin_unlock(&brd->bd_lock);
- }
- }
+ p->u.module.type = module_type;
-schedule_poller:
+ break;
- /*
- * Schedule ourself back at the nominal wakeup interval.
- */
- spin_lock_irqsave(&dgap_poll_lock, lock_flags);
- dgap_poll_time += dgap_jiffies_from_ms(dgap_poll_tick);
+ case CABLE:
+ if (p->type == LNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ p->u.line.cable = kstrdup(s, GFP_KERNEL);
+ p->u.line.v_cable = 1;
+ }
+ break;
- new_time = dgap_poll_time - jiffies;
+ case SPEED: /* sync line speed indication */
+ if (p->type == LNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.line.speed)) {
+ pr_err("bad number for line speed");
+ return -1;
+ }
+ p->u.line.v_speed = 1;
+ } else if (p->type == CNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.conc.speed)) {
+ pr_err("bad number for line speed");
+ return -1;
+ }
+ p->u.conc.v_speed = 1;
+ } else {
+ pr_err("speed valid only for lines or concentrators.");
+ return -1;
+ }
+ break;
- if ((ulong) new_time >= 2 * dgap_poll_tick) {
- dgap_poll_time =
- jiffies + dgap_jiffies_from_ms(dgap_poll_tick);
- }
+ case CONNECT:
+ if (p->type == CNODE) {
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ p->u.conc.connect = kstrdup(s, GFP_KERNEL);
+ p->u.conc.v_connect = 1;
+ }
+ break;
+ case PRINT: /* transparent print name prefix */
+ if (dgap_checknode(p))
+ return -1;
- dgap_poll_timer.function = dgap_poll_handler;
- dgap_poll_timer.data = 0;
- dgap_poll_timer.expires = dgap_poll_time;
- spin_unlock_irqrestore(&dgap_poll_lock, lock_flags);
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- if (!dgap_poll_stop)
- add_timer(&dgap_poll_timer);
-}
+ p = p->next;
+ p->type = PNODE;
-/*
- * dgap_intr()
- *
- * Driver interrupt handler.
- */
-static irqreturn_t dgap_intr(int irq, void *voidbrd)
-{
- struct board_t *brd = (struct board_t *) voidbrd;
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpeced end of file");
+ return -1;
+ }
+ p->u.printname = kstrdup(s, GFP_KERNEL);
+ if (!p->u.printname)
+ return -1;
- if (!brd)
- return IRQ_NONE;
+ break;
- /*
- * Check to make sure its for us.
- */
- if (brd->magic != DGAP_BOARD_MAGIC)
- return IRQ_NONE;
+ case CMAJOR: /* major number */
+ if (dgap_checknode(p))
+ return -1;
- brd->intr_count++;
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- /*
- * Schedule tasklet to run at a better time.
- */
- tasklet_schedule(&brd->helper_tasklet);
- return IRQ_HANDLED;
-}
+ p = p->next;
+ p->type = JNODE;
-/*
- * dgap_init_globals()
- *
- * This is where we initialize the globals from the static insmod
- * configuration variables. These are declared near the head of
- * this file.
- */
-static void dgap_init_globals(void)
-{
- int i;
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.majornumber)) {
+ pr_err("bad number for major number");
+ return -1;
+ }
+ break;
- for (i = 0; i < MAXBOARDS; i++)
- dgap_board[i] = NULL;
+ case ALTPIN: /* altpin setting */
+ if (dgap_checknode(p))
+ return -1;
- init_timer(&dgap_poll_timer);
-}
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
-/************************************************************************
- *
- * TTY Initialization/Cleanup Functions
- *
- ************************************************************************/
+ p = p->next;
+ p->type = ANODE;
-/*
- * dgap_tty_register()
- *
- * Init the tty subsystem for this board.
- */
-static int dgap_tty_register(struct board_t *brd)
-{
- int rc;
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.altpin)) {
+ pr_err("bad number for altpin");
+ return -1;
+ }
+ break;
- brd->serial_driver = tty_alloc_driver(MAXPORTS, 0);
- if (IS_ERR(brd->serial_driver))
- return PTR_ERR(brd->serial_driver);
+ case USEINTR: /* enable interrupt setting */
+ if (dgap_checknode(p))
+ return -1;
- snprintf(brd->serial_name, MAXTTYNAMELEN, "tty_dgap_%d_",
- brd->boardnum);
- brd->serial_driver->name = brd->serial_name;
- brd->serial_driver->name_base = 0;
- brd->serial_driver->major = 0;
- brd->serial_driver->minor_start = 0;
- brd->serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- brd->serial_driver->subtype = SERIAL_TYPE_NORMAL;
- brd->serial_driver->init_termios = dgap_default_termios;
- brd->serial_driver->driver_name = DRVSTR;
- brd->serial_driver->flags = (TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_DYNAMIC_DEV |
- TTY_DRIVER_HARDWARE_BREAK);
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- /* The kernel wants space to store pointers to tty_structs */
- brd->serial_driver->ttys =
- kzalloc(MAXPORTS * sizeof(struct tty_struct *), GFP_KERNEL);
- if (!brd->serial_driver->ttys) {
- rc = -ENOMEM;
- goto free_serial_drv;
- }
+ p = p->next;
+ p->type = INTRNODE;
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.useintr)) {
+ pr_err("bad number for useintr");
+ return -1;
+ }
+ break;
- /*
- * Entry points for driver. Called by the kernel from
- * tty_io.c and n_tty.c.
- */
- tty_set_operations(brd->serial_driver, &dgap_tty_ops);
+ case TTSIZ: /* size of tty structure */
+ if (dgap_checknode(p))
+ return -1;
- /*
- * If we're doing transparent print, we have to do all of the above
- * again, separately so we don't get the LD confused about what major
- * we are when we get into the dgap_tty_open() routine.
- */
- brd->print_driver = tty_alloc_driver(MAXPORTS, 0);
- if (IS_ERR(brd->print_driver)) {
- rc = PTR_ERR(brd->print_driver);
- goto free_serial_drv;
- }
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- snprintf(brd->print_name, MAXTTYNAMELEN, "pr_dgap_%d_",
- brd->boardnum);
- brd->print_driver->name = brd->print_name;
- brd->print_driver->name_base = 0;
- brd->print_driver->major = 0;
- brd->print_driver->minor_start = 0;
- brd->print_driver->type = TTY_DRIVER_TYPE_SERIAL;
- brd->print_driver->subtype = SERIAL_TYPE_NORMAL;
- brd->print_driver->init_termios = dgap_default_termios;
- brd->print_driver->driver_name = DRVSTR;
- brd->print_driver->flags = (TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_DYNAMIC_DEV |
- TTY_DRIVER_HARDWARE_BREAK);
+ p = p->next;
+ p->type = TSNODE;
- /* The kernel wants space to store pointers to tty_structs */
- brd->print_driver->ttys =
- kzalloc(MAXPORTS * sizeof(struct tty_struct *), GFP_KERNEL);
- if (!brd->print_driver->ttys) {
- rc = -ENOMEM;
- goto free_print_drv;
- }
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.ttysize)) {
+ pr_err("bad number for ttysize");
+ return -1;
+ }
+ break;
- /*
- * Entry points for driver. Called by the kernel from
- * tty_io.c and n_tty.c.
- */
- tty_set_operations(brd->print_driver, &dgap_tty_ops);
+ case CHSIZ: /* channel structure size */
+ if (dgap_checknode(p))
+ return -1;
- /* Register tty devices */
- rc = tty_register_driver(brd->serial_driver);
- if (rc < 0)
- goto free_print_drv;
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- /* Register Transparent Print devices */
- rc = tty_register_driver(brd->print_driver);
- if (rc < 0)
- goto unregister_serial_drv;
+ p = p->next;
+ p->type = CSNODE;
- dgap_boards_by_major[brd->serial_driver->major] = brd;
- brd->dgap_serial_major = brd->serial_driver->major;
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.chsize)) {
+ pr_err("bad number for chsize");
+ return -1;
+ }
+ break;
- dgap_boards_by_major[brd->print_driver->major] = brd;
- brd->dgap_transparent_print_major = brd->print_driver->major;
+ case BSSIZ: /* board structure size */
+ if (dgap_checknode(p))
+ return -1;
- return 0;
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
-unregister_serial_drv:
- tty_unregister_driver(brd->serial_driver);
-free_print_drv:
- put_tty_driver(brd->print_driver);
-free_serial_drv:
- put_tty_driver(brd->serial_driver);
+ p = p->next;
+ p->type = BSNODE;
- return rc;
-}
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.bssize)) {
+ pr_err("bad number for bssize");
+ return -1;
+ }
+ break;
-static void dgap_tty_unregister(struct board_t *brd)
-{
- tty_unregister_driver(brd->print_driver);
- tty_unregister_driver(brd->serial_driver);
- put_tty_driver(brd->print_driver);
- put_tty_driver(brd->serial_driver);
-}
+ case UNTSIZ: /* sched structure size */
+ if (dgap_checknode(p))
+ return -1;
-/*
- * dgap_tty_init()
- *
- * Init the tty subsystem. Called once per board after board has been
- * downloaded and init'ed.
- */
-static int dgap_tty_init(struct board_t *brd)
-{
- int i;
- int tlw;
- uint true_count;
- u8 __iomem *vaddr;
- u8 modem;
- struct channel_t *ch;
- struct bs_t __iomem *bs;
- struct cm_t __iomem *cm;
- int ret;
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- /*
- * Initialize board structure elements.
- */
+ p = p->next;
+ p->type = USNODE;
- vaddr = brd->re_map_membase;
- true_count = readw((vaddr + NCHAN));
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.unsize)) {
+ pr_err("bad number for schedsize");
+ return -1;
+ }
+ break;
- brd->nasync = dgap_config_get_num_prts(brd);
+ case F2SIZ: /* f2200 structure size */
+ if (dgap_checknode(p))
+ return -1;
- if (!brd->nasync)
- brd->nasync = brd->maxports;
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- if (brd->nasync > brd->maxports)
- brd->nasync = brd->maxports;
+ p = p->next;
+ p->type = FSNODE;
- if (true_count != brd->nasync) {
- dev_warn(&brd->pdev->dev,
- "%s configured for %d ports, has %d ports.\n",
- brd->name, brd->nasync, true_count);
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.f2size)) {
+ pr_err("bad number for f2200size");
+ return -1;
+ }
+ break;
- if ((brd->type == PPCM) &&
- (true_count == 64 || true_count == 0)) {
- dev_warn(&brd->pdev->dev,
- "Please make SURE the EBI cable running from the card\n");
- dev_warn(&brd->pdev->dev,
- "to each EM module is plugged into EBI IN!\n");
- }
+ case VPSIZ: /* vpix structure size */
+ if (dgap_checknode(p))
+ return -1;
- brd->nasync = true_count;
+ p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
+ if (!p->next)
+ return -1;
- /* If no ports, don't bother going any further */
- if (!brd->nasync) {
- brd->state = BOARD_FAILED;
- brd->dpastatus = BD_NOFEP;
- return -EIO;
- }
- }
+ p = p->next;
+ p->type = VSNODE;
- /*
- * Allocate channel memory that might not have been allocated
- * when the driver was first loaded.
- */
- for (i = 0; i < brd->nasync; i++) {
- brd->channels[i] =
- kzalloc(sizeof(struct channel_t), GFP_KERNEL);
- if (!brd->channels[i]) {
- ret = -ENOMEM;
- goto free_chan;
+ s = dgap_getword(in);
+ if (!s) {
+ pr_err("unexpected end of file");
+ return -1;
+ }
+ if (kstrtol(s, 0, &p->u.vpixsize)) {
+ pr_err("bad number for vpixsize");
+ return -1;
+ }
+ break;
}
}
+}
- ch = brd->channels[0];
- vaddr = brd->re_map_membase;
+static void dgap_cleanup_nodes(void)
+{
+ struct cnode *p;
- bs = (struct bs_t __iomem *) ((ulong) vaddr + CHANBUF);
- cm = (struct cm_t __iomem *) ((ulong) vaddr + CMDBUF);
+ p = &dgap_head;
- brd->bd_bs = bs;
+ while (p) {
+ struct cnode *tmp = p->next;
- /* Set up channel variables */
- for (i = 0; i < brd->nasync; i++, ch = brd->channels[i], bs++) {
+ if (p->type == NULLNODE) {
+ p = tmp;
+ continue;
+ }
- spin_lock_init(&ch->ch_lock);
+ switch (p->type) {
+ case BNODE:
+ kfree(p->u.board.portstr);
+ kfree(p->u.board.addrstr);
+ kfree(p->u.board.pcibusstr);
+ kfree(p->u.board.pcislotstr);
+ kfree(p->u.board.method);
+ break;
+ case CNODE:
+ kfree(p->u.conc.id);
+ kfree(p->u.conc.connect);
+ break;
+ case MNODE:
+ kfree(p->u.module.id);
+ break;
+ case TNODE:
+ kfree(p->u.ttyname);
+ break;
+ case CUNODE:
+ kfree(p->u.cuname);
+ break;
+ case LNODE:
+ kfree(p->u.line.cable);
+ break;
+ case PNODE:
+ kfree(p->u.printname);
+ break;
+ }
- /* Store all our magic numbers */
- ch->magic = DGAP_CHANNEL_MAGIC;
- ch->ch_tun.magic = DGAP_UNIT_MAGIC;
- ch->ch_tun.un_type = DGAP_SERIAL;
- ch->ch_tun.un_ch = ch;
- ch->ch_tun.un_dev = i;
+ kfree(p->u.board.status);
+ kfree(p);
+ p = tmp;
+ }
+}
- ch->ch_pun.magic = DGAP_UNIT_MAGIC;
- ch->ch_pun.un_type = DGAP_PRINT;
- ch->ch_pun.un_ch = ch;
- ch->ch_pun.un_dev = i;
+/*
+ * Retrives the current custom baud rate from FEP memory,
+ * and returns it back to the user.
+ * Returns 0 on error.
+ */
+static uint dgap_get_custom_baud(struct channel_t *ch)
+{
+ u8 __iomem *vaddr;
+ ulong offset;
+ uint value;
- ch->ch_vaddr = vaddr;
- ch->ch_bs = bs;
- ch->ch_cm = cm;
- ch->ch_bd = brd;
- ch->ch_portnum = i;
- ch->ch_digi = dgap_digi_init;
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return 0;
- /*
- * Set up digi dsr and dcd bits based on altpin flag.
- */
- if (dgap_config_get_altpin(brd)) {
- ch->ch_dsr = DM_CD;
- ch->ch_cd = DM_DSR;
- ch->ch_digi.digi_flags |= DIGI_ALTPIN;
- } else {
- ch->ch_cd = DM_CD;
- ch->ch_dsr = DM_DSR;
- }
+ if (!ch->ch_bd || ch->ch_bd->magic != DGAP_BOARD_MAGIC)
+ return 0;
- ch->ch_taddr = vaddr + (ioread16(&(ch->ch_bs->tx_seg)) << 4);
- ch->ch_raddr = vaddr + (ioread16(&(ch->ch_bs->rx_seg)) << 4);
- ch->ch_tx_win = 0;
- ch->ch_rx_win = 0;
- ch->ch_tsize = readw(&(ch->ch_bs->tx_max)) + 1;
- ch->ch_rsize = readw(&(ch->ch_bs->rx_max)) + 1;
- ch->ch_tstart = 0;
- ch->ch_rstart = 0;
+ if (!(ch->ch_bd->bd_flags & BD_FEP5PLUS))
+ return 0;
- /*
- * Set queue water marks, interrupt mask,
- * and general tty parameters.
- */
- tlw = ch->ch_tsize >= 2000 ? ((ch->ch_tsize * 5) / 8) :
- ch->ch_tsize / 2;
- ch->ch_tlw = tlw;
+ vaddr = ch->ch_bd->re_map_membase;
- dgap_cmdw(ch, STLOW, tlw, 0);
+ if (!vaddr)
+ return 0;
- dgap_cmdw(ch, SRLOW, ch->ch_rsize / 2, 0);
+ /*
+ * Go get from fep mem, what the fep
+ * believes the custom baud rate is.
+ */
+ offset = (ioread16(vaddr + ECS_SEG) << 4) + (ch->ch_portnum * 0x28)
+ + LINE_SPEED;
- dgap_cmdw(ch, SRHIGH, 7 * ch->ch_rsize / 8, 0);
+ value = readw(vaddr + offset);
+ return value;
+}
- ch->ch_mistat = readb(&(ch->ch_bs->m_stat));
+/*
+ * Remap PCI memory.
+ */
+static int dgap_remap(struct board_t *brd)
+{
+ if (!brd || brd->magic != DGAP_BOARD_MAGIC)
+ return -EIO;
- init_waitqueue_head(&ch->ch_flags_wait);
- init_waitqueue_head(&ch->ch_tun.un_flags_wait);
- init_waitqueue_head(&ch->ch_pun.un_flags_wait);
+ if (!request_mem_region(brd->membase, 0x200000, "dgap"))
+ return -ENOMEM;
- /* Turn on all modem interrupts for now */
- modem = (DM_CD | DM_DSR | DM_CTS | DM_RI);
- writeb(modem, &(ch->ch_bs->m_int));
+ if (!request_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000,
+ "dgap")) {
+ release_mem_region(brd->membase, 0x200000);
+ return -ENOMEM;
+ }
- /*
- * Set edelay to 0 if interrupts are turned on,
- * otherwise set edelay to the usual 100.
- */
- if (brd->intr_used)
- writew(0, &(ch->ch_bs->edelay));
- else
- writew(100, &(ch->ch_bs->edelay));
+ brd->re_map_membase = ioremap(brd->membase, 0x200000);
+ if (!brd->re_map_membase) {
+ release_mem_region(brd->membase, 0x200000);
+ release_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000);
+ return -ENOMEM;
+ }
- writeb(1, &(ch->ch_bs->idata));
+ brd->re_map_port = ioremap((brd->membase + PCI_IO_OFFSET), 0x200000);
+ if (!brd->re_map_port) {
+ release_mem_region(brd->membase, 0x200000);
+ release_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000);
+ iounmap(brd->re_map_membase);
+ return -ENOMEM;
}
return 0;
-
-free_chan:
- while (--i >= 0) {
- kfree(brd->channels[i]);
- brd->channels[i] = NULL;
- }
- return ret;
}
-/*
- * dgap_tty_free()
- *
- * Free the channles which are allocated in dgap_tty_init().
- */
-static void dgap_tty_free(struct board_t *brd)
+static void dgap_unmap(struct board_t *brd)
{
- int i;
-
- for (i = 0; i < brd->nasync; i++)
- kfree(brd->channels[i]);
+ iounmap(brd->re_map_port);
+ iounmap(brd->re_map_membase);
+ release_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000);
+ release_mem_region(brd->membase, 0x200000);
}
+
/*
- * dgap_cleanup_tty()
+ * dgap_parity_scan()
*
- * Uninitialize the TTY portion of this driver. Free all memory and
- * resources.
+ * Convert the FEP5 way of reporting parity errors and breaks into
+ * the Linux line discipline way.
*/
-static void dgap_cleanup_tty(struct board_t *brd)
+static void dgap_parity_scan(struct channel_t *ch, unsigned char *cbuf,
+ unsigned char *fbuf, int *len)
{
- struct device *dev;
- int i;
+ int l = *len;
+ int count = 0;
+ unsigned char *in, *cout, *fout;
+ unsigned char c;
- dgap_boards_by_major[brd->serial_driver->major] = NULL;
- brd->dgap_serial_major = 0;
- for (i = 0; i < brd->nasync; i++) {
- tty_port_destroy(&brd->serial_ports[i]);
- dev = brd->channels[i]->ch_tun.un_sysfs;
- dgap_remove_tty_sysfs(dev);
- tty_unregister_device(brd->serial_driver, i);
- }
- tty_unregister_driver(brd->serial_driver);
- put_tty_driver(brd->serial_driver);
- kfree(brd->serial_ports);
+ in = cbuf;
+ cout = cbuf;
+ fout = fbuf;
- dgap_boards_by_major[brd->print_driver->major] = NULL;
- brd->dgap_transparent_print_major = 0;
- for (i = 0; i < brd->nasync; i++) {
- tty_port_destroy(&brd->printer_ports[i]);
- dev = brd->channels[i]->ch_pun.un_sysfs;
- dgap_remove_tty_sysfs(dev);
- tty_unregister_device(brd->print_driver, i);
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ while (l--) {
+ c = *in++;
+ switch (ch->pscan_state) {
+ default:
+ /* reset to sanity and fall through */
+ ch->pscan_state = 0;
+
+ case 0:
+ /* No FF seen yet */
+ if (c == (unsigned char) '\377')
+ /* delete this character from stream */
+ ch->pscan_state = 1;
+ else {
+ *cout++ = c;
+ *fout++ = TTY_NORMAL;
+ count += 1;
+ }
+ break;
+
+ case 1:
+ /* first FF seen */
+ if (c == (unsigned char) '\377') {
+ /* doubled ff, transform to single ff */
+ *cout++ = c;
+ *fout++ = TTY_NORMAL;
+ count += 1;
+ ch->pscan_state = 0;
+ } else {
+ /* save value examination in next state */
+ ch->pscan_savechar = c;
+ ch->pscan_state = 2;
+ }
+ break;
+
+ case 2:
+ /* third character of ff sequence */
+
+ *cout++ = c;
+
+ if (ch->pscan_savechar == 0x0) {
+
+ if (c == 0x0) {
+ ch->ch_err_break++;
+ *fout++ = TTY_BREAK;
+ } else {
+ ch->ch_err_parity++;
+ *fout++ = TTY_PARITY;
+ }
+ }
+
+ count += 1;
+ ch->pscan_state = 0;
+ }
}
- tty_unregister_driver(brd->print_driver);
- put_tty_driver(brd->print_driver);
- kfree(brd->printer_ports);
+ *len = count;
}
/*=======================================================================
@@ -1750,6 +1718,33 @@ static void dgap_input(struct channel_t *ch)
}
+static void dgap_write_wakeup(struct board_t *bd, struct channel_t *ch,
+ struct un_t *un, u32 mask,
+ unsigned long *irq_flags1,
+ unsigned long *irq_flags2)
+{
+ if (!(un->un_flags & mask))
+ return;
+
+ un->un_flags &= ~mask;
+
+ if (!(un->un_flags & UN_ISOPEN))
+ return;
+
+ if ((un->un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+ un->un_tty->ldisc->ops->write_wakeup) {
+ spin_unlock_irqrestore(&ch->ch_lock, *irq_flags2);
+ spin_unlock_irqrestore(&bd->bd_lock, *irq_flags1);
+
+ (un->un_tty->ldisc->ops->write_wakeup)(un->un_tty);
+
+ spin_lock_irqsave(&bd->bd_lock, *irq_flags1);
+ spin_lock_irqsave(&ch->ch_lock, *irq_flags2);
+ }
+ wake_up_interruptible(&un->un_tty->write_wait);
+ wake_up_interruptible(&un->un_flags_wait);
+}
+
/************************************************************************
* Determines when CARRIER changes state and takes appropriate
* action.
@@ -1864,163 +1859,1207 @@ static void dgap_carrier(struct channel_t *ch)
ch->ch_flags &= ~CH_CD;
}
-/************************************************************************
+/*=======================================================================
*
- * TTY Entry points and helper functions
+ * dgap_event - FEP to host event processing routine.
*
- ************************************************************************/
-
-/*
- * dgap_tty_open()
+ * bd - Board of current event.
*
- */
-static int dgap_tty_open(struct tty_struct *tty, struct file *file)
+ *=======================================================================*/
+static int dgap_event(struct board_t *bd)
{
- struct board_t *brd;
struct channel_t *ch;
- struct un_t *un;
- struct bs_t __iomem *bs;
- uint major;
- uint minor;
- int rc;
ulong lock_flags;
ulong lock_flags2;
- u16 head;
+ struct bs_t __iomem *bs;
+ u8 __iomem *event;
+ u8 __iomem *vaddr;
+ struct ev_t __iomem *eaddr;
+ uint head;
+ uint tail;
+ int port;
+ int reason;
+ int modem;
+ int b1;
- major = MAJOR(tty_devnum(tty));
- minor = MINOR(tty_devnum(tty));
+ if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+ return -EIO;
- if (major > 255)
+ spin_lock_irqsave(&bd->bd_lock, lock_flags);
+
+ vaddr = bd->re_map_membase;
+
+ if (!vaddr) {
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
return -EIO;
+ }
- /* Get board pointer from our array of majors we have allocated */
- brd = dgap_boards_by_major[major];
- if (!brd)
+ eaddr = (struct ev_t __iomem *) (vaddr + EVBUF);
+
+ /* Get our head and tail */
+ head = readw(&(eaddr->ev_head));
+ tail = readw(&(eaddr->ev_tail));
+
+ /*
+ * Forget it if pointers out of range.
+ */
+
+ if (head >= EVMAX - EVSTART || tail >= EVMAX - EVSTART ||
+ (head | tail) & 03) {
+ /* Let go of board lock */
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
return -EIO;
+ }
/*
- * If board is not yet up to a state of READY, go to
- * sleep waiting for it to happen or they cancel the open.
+ * Loop to process all the events in the buffer.
*/
- rc = wait_event_interruptible(brd->state_wait,
- (brd->state & BOARD_READY));
+ while (tail != head) {
- if (rc)
- return rc;
+ /*
+ * Get interrupt information.
+ */
- spin_lock_irqsave(&brd->bd_lock, lock_flags);
+ event = bd->re_map_membase + tail + EVSTART;
- /* The wait above should guarantee this cannot happen */
- if (brd->state != BOARD_READY) {
- spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
- return -EIO;
+ port = ioread8(event);
+ reason = ioread8(event + 1);
+ modem = ioread8(event + 2);
+ b1 = ioread8(event + 3);
+
+ /*
+ * Make sure the interrupt is valid.
+ */
+ if (port >= bd->nasync)
+ goto next;
+
+ if (!(reason & (IFMODEM | IFBREAK | IFTLW | IFTEM | IFDATA)))
+ goto next;
+
+ ch = bd->channels[port];
+
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ goto next;
+
+ /*
+ * If we have made it here, the event was valid.
+ * Lock down the channel.
+ */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags2);
+
+ bs = ch->ch_bs;
+
+ if (!bs) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+ goto next;
+ }
+
+ /*
+ * Process received data.
+ */
+ if (reason & IFDATA) {
+
+ /*
+ * ALL LOCKS *MUST* BE DROPPED BEFORE CALLING INPUT!
+ * input could send some data to ld, which in turn
+ * could do a callback to one of our other functions.
+ */
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
+
+ dgap_input(ch);
+
+ spin_lock_irqsave(&bd->bd_lock, lock_flags);
+ spin_lock_irqsave(&ch->ch_lock, lock_flags2);
+
+ if (ch->ch_flags & CH_RACTIVE)
+ ch->ch_flags |= CH_RENABLE;
+ else
+ writeb(1, &(bs->idata));
+
+ if (ch->ch_flags & CH_RWAIT) {
+ ch->ch_flags &= ~CH_RWAIT;
+
+ wake_up_interruptible
+ (&ch->ch_tun.un_flags_wait);
+ }
+ }
+
+ /*
+ * Process Modem change signals.
+ */
+ if (reason & IFMODEM) {
+ ch->ch_mistat = modem;
+ dgap_carrier(ch);
+ }
+
+ /*
+ * Process break.
+ */
+ if (reason & IFBREAK) {
+
+ if (ch->ch_tun.un_tty) {
+ /* A break has been indicated */
+ ch->ch_err_break++;
+ tty_buffer_request_room
+ (ch->ch_tun.un_tty->port, 1);
+ tty_insert_flip_char(ch->ch_tun.un_tty->port,
+ 0, TTY_BREAK);
+ tty_flip_buffer_push(ch->ch_tun.un_tty->port);
+ }
+ }
+
+ /*
+ * Process Transmit low.
+ */
+ if (reason & IFTLW) {
+ dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_LOW,
+ &lock_flags, &lock_flags2);
+ dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_LOW,
+ &lock_flags, &lock_flags2);
+ if (ch->ch_flags & CH_WLOW) {
+ ch->ch_flags &= ~CH_WLOW;
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+ }
+
+ /*
+ * Process Transmit empty.
+ */
+ if (reason & IFTEM) {
+ dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_EMPTY,
+ &lock_flags, &lock_flags2);
+ dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_EMPTY,
+ &lock_flags, &lock_flags2);
+ if (ch->ch_flags & CH_WEMPTY) {
+ ch->ch_flags &= ~CH_WEMPTY;
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+ }
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+
+next:
+ tail = (tail + 4) & (EVMAX - EVSTART - 4);
}
- /* If opened device is greater than our number of ports, bail. */
- if (MINOR(tty_devnum(tty)) > brd->nasync) {
- spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
- return -EIO;
+ writew(tail, &(eaddr->ev_tail));
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
+
+ return 0;
+}
+
+/*
+ * Our board poller function.
+ */
+static void dgap_poll_tasklet(unsigned long data)
+{
+ struct board_t *bd = (struct board_t *) data;
+ ulong lock_flags;
+ char __iomem *vaddr;
+ u16 head, tail;
+
+ if (!bd || (bd->magic != DGAP_BOARD_MAGIC))
+ return;
+
+ if (bd->inhibit_poller)
+ return;
+
+ spin_lock_irqsave(&bd->bd_lock, lock_flags);
+
+ vaddr = bd->re_map_membase;
+
+ /*
+ * If board is ready, parse deeper to see if there is anything to do.
+ */
+ if (bd->state == BOARD_READY) {
+
+ struct ev_t __iomem *eaddr;
+
+ if (!bd->re_map_membase) {
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
+ return;
+ }
+ if (!bd->re_map_port) {
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
+ return;
+ }
+
+ if (!bd->nasync)
+ goto out;
+
+ eaddr = (struct ev_t __iomem *) (vaddr + EVBUF);
+
+ /* Get our head and tail */
+ head = readw(&(eaddr->ev_head));
+ tail = readw(&(eaddr->ev_tail));
+
+ /*
+ * If there is an event pending. Go service it.
+ */
+ if (head != tail) {
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
+ dgap_event(bd);
+ spin_lock_irqsave(&bd->bd_lock, lock_flags);
+ }
+
+out:
+ /*
+ * If board is doing interrupts, ACK the interrupt.
+ */
+ if (bd && bd->intr_running)
+ readb(bd->re_map_port + 2);
+
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
+ return;
}
- ch = brd->channels[minor];
- if (!ch) {
- spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
- return -EIO;
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
+}
+
+/*
+ * dgap_found_board()
+ *
+ * A board has been found, init it.
+ */
+static struct board_t *dgap_found_board(struct pci_dev *pdev, int id,
+ int boardnum)
+{
+ struct board_t *brd;
+ unsigned int pci_irq;
+ int i;
+ int ret;
+
+ /* get the board structure and prep it */
+ brd = kzalloc(sizeof(struct board_t), GFP_KERNEL);
+ if (!brd)
+ return ERR_PTR(-ENOMEM);
+
+ /* store the info for the board we've found */
+ brd->magic = DGAP_BOARD_MAGIC;
+ brd->boardnum = boardnum;
+ brd->vendor = dgap_pci_tbl[id].vendor;
+ brd->device = dgap_pci_tbl[id].device;
+ brd->pdev = pdev;
+ brd->pci_bus = pdev->bus->number;
+ brd->pci_slot = PCI_SLOT(pdev->devfn);
+ brd->name = dgap_ids[id].name;
+ brd->maxports = dgap_ids[id].maxports;
+ brd->type = dgap_ids[id].config_type;
+ brd->dpatype = dgap_ids[id].dpatype;
+ brd->dpastatus = BD_NOFEP;
+ init_waitqueue_head(&brd->state_wait);
+
+ spin_lock_init(&brd->bd_lock);
+
+ brd->inhibit_poller = FALSE;
+ brd->wait_for_bios = 0;
+ brd->wait_for_fep = 0;
+
+ for (i = 0; i < MAXPORTS; i++)
+ brd->channels[i] = NULL;
+
+ /* store which card & revision we have */
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &brd->subvendor);
+ pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &brd->subdevice);
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev);
+
+ pci_irq = pdev->irq;
+ brd->irq = pci_irq;
+
+ /* get the PCI Base Address Registers */
+
+ /* Xr Jupiter and EPC use BAR 2 */
+ if (brd->device == PCI_DEV_XRJ_DID || brd->device == PCI_DEV_EPCJ_DID) {
+ brd->membase = pci_resource_start(pdev, 2);
+ brd->membase_end = pci_resource_end(pdev, 2);
+ }
+ /* Everyone else uses BAR 0 */
+ else {
+ brd->membase = pci_resource_start(pdev, 0);
+ brd->membase_end = pci_resource_end(pdev, 0);
}
- /* Grab channel lock */
- spin_lock_irqsave(&ch->ch_lock, lock_flags2);
+ if (!brd->membase) {
+ ret = -ENODEV;
+ goto free_brd;
+ }
- /* Figure out our type */
- if (major == brd->dgap_serial_major) {
- un = &brd->channels[minor]->ch_tun;
- un->un_type = DGAP_SERIAL;
- } else if (major == brd->dgap_transparent_print_major) {
- un = &brd->channels[minor]->ch_pun;
- un->un_type = DGAP_PRINT;
+ if (brd->membase & 1)
+ brd->membase &= ~3;
+ else
+ brd->membase &= ~15;
+
+ /*
+ * On the PCI boards, there is no IO space allocated
+ * The I/O registers will be in the first 3 bytes of the
+ * upper 2MB of the 4MB memory space. The board memory
+ * will be mapped into the low 2MB of the 4MB memory space
+ */
+ brd->port = brd->membase + PCI_IO_OFFSET;
+ brd->port_end = brd->port + PCI_IO_SIZE;
+
+ /*
+ * Special initialization for non-PLX boards
+ */
+ if (brd->device != PCI_DEV_XRJ_DID && brd->device != PCI_DEV_EPCJ_DID) {
+ unsigned short cmd;
+
+ pci_write_config_byte(pdev, 0x40, 0);
+ pci_write_config_byte(pdev, 0x46, 0);
+
+ /* Limit burst length to 2 doubleword transactions */
+ pci_write_config_byte(pdev, 0x42, 1);
+
+ /*
+ * Enable IO and mem if not already done.
+ * This was needed for support on Itanium.
+ */
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ cmd |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+ }
+
+ /* init our poll helper tasklet */
+ tasklet_init(&brd->helper_tasklet, dgap_poll_tasklet,
+ (unsigned long) brd);
+
+ ret = dgap_remap(brd);
+ if (ret)
+ goto free_brd;
+
+ pr_info("dgap: board %d: %s (rev %d), irq %ld\n",
+ boardnum, brd->name, brd->rev, brd->irq);
+
+ return brd;
+
+free_brd:
+ kfree(brd);
+
+ return ERR_PTR(ret);
+}
+
+/*
+ * dgap_intr()
+ *
+ * Driver interrupt handler.
+ */
+static irqreturn_t dgap_intr(int irq, void *voidbrd)
+{
+ struct board_t *brd = (struct board_t *) voidbrd;
+
+ if (!brd)
+ return IRQ_NONE;
+
+ /*
+ * Check to make sure its for us.
+ */
+ if (brd->magic != DGAP_BOARD_MAGIC)
+ return IRQ_NONE;
+
+ brd->intr_count++;
+
+ /*
+ * Schedule tasklet to run at a better time.
+ */
+ tasklet_schedule(&brd->helper_tasklet);
+ return IRQ_HANDLED;
+}
+
+/*****************************************************************************
+*
+* Function:
+*
+* dgap_poll_handler
+*
+* Author:
+*
+* Scott H Kilau
+*
+* Parameters:
+*
+* dummy -- ignored
+*
+* Return Values:
+*
+* none
+*
+* Description:
+*
+* As each timer expires, it determines (a) whether the "transmit"
+* waiter needs to be woken up, and (b) whether the poller needs to
+* be rescheduled.
+*
+******************************************************************************/
+
+static void dgap_poll_handler(ulong dummy)
+{
+ int i;
+ struct board_t *brd;
+ unsigned long lock_flags;
+ ulong new_time;
+
+ dgap_poll_counter++;
+
+ /*
+ * Do not start the board state machine until
+ * driver tells us its up and running, and has
+ * everything it needs.
+ */
+ if (dgap_driver_state != DRIVER_READY)
+ goto schedule_poller;
+
+ /*
+ * If we have just 1 board, or the system is not SMP,
+ * then use the typical old style poller.
+ * Otherwise, use our new tasklet based poller, which should
+ * speed things up for multiple boards.
+ */
+ if ((dgap_numboards == 1) || (num_online_cpus() <= 1)) {
+ for (i = 0; i < dgap_numboards; i++) {
+
+ brd = dgap_board[i];
+
+ if (brd->state == BOARD_FAILED)
+ continue;
+ if (!brd->intr_running)
+ /* Call the real board poller directly */
+ dgap_poll_tasklet((unsigned long) brd);
+ }
} else {
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
- spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
- return -EIO;
+ /*
+ * Go thru each board, kicking off a
+ * tasklet for each if needed
+ */
+ for (i = 0; i < dgap_numboards; i++) {
+ brd = dgap_board[i];
+
+ /*
+ * Attempt to grab the board lock.
+ *
+ * If we can't get it, no big deal, the next poll
+ * will get it. Basically, I just really don't want
+ * to spin in here, because I want to kick off my
+ * tasklets as fast as I can, and then get out the
+ * poller.
+ */
+ if (!spin_trylock(&brd->bd_lock))
+ continue;
+
+ /*
+ * If board is in a failed state, don't bother
+ * scheduling a tasklet
+ */
+ if (brd->state == BOARD_FAILED) {
+ spin_unlock(&brd->bd_lock);
+ continue;
+ }
+
+ /* Schedule a poll helper task */
+ if (!brd->intr_running)
+ tasklet_schedule(&brd->helper_tasklet);
+
+ /*
+ * Can't do DGAP_UNLOCK here, as we don't have
+ * lock_flags because we did a trylock above.
+ */
+ spin_unlock(&brd->bd_lock);
+ }
}
- /* Store our unit into driver_data, so we always have it available. */
- tty->driver_data = un;
+schedule_poller:
/*
- * Error if channel info pointer is NULL.
+ * Schedule ourself back at the nominal wakeup interval.
*/
- bs = ch->ch_bs;
- if (!bs) {
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
- spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
- return -EIO;
+ spin_lock_irqsave(&dgap_poll_lock, lock_flags);
+ dgap_poll_time += dgap_jiffies_from_ms(dgap_poll_tick);
+
+ new_time = dgap_poll_time - jiffies;
+
+ if ((ulong) new_time >= 2 * dgap_poll_tick) {
+ dgap_poll_time =
+ jiffies + dgap_jiffies_from_ms(dgap_poll_tick);
}
+ dgap_poll_timer.function = dgap_poll_handler;
+ dgap_poll_timer.data = 0;
+ dgap_poll_timer.expires = dgap_poll_time;
+ spin_unlock_irqrestore(&dgap_poll_lock, lock_flags);
+
+ if (!dgap_poll_stop)
+ add_timer(&dgap_poll_timer);
+}
+
+/*=======================================================================
+ *
+ * dgap_cmdb - Sends a 2 byte command to the FEP.
+ *
+ * ch - Pointer to channel structure.
+ * cmd - Command to be sent.
+ * byte1 - Integer containing first byte to be sent.
+ * byte2 - Integer containing second byte to be sent.
+ * ncmds - Wait until ncmds or fewer cmds are left
+ * in the cmd buffer before returning.
+ *
+ *=======================================================================*/
+static void dgap_cmdb(struct channel_t *ch, u8 cmd, u8 byte1,
+ u8 byte2, uint ncmds)
+{
+ char __iomem *vaddr;
+ struct __iomem cm_t *cm_addr;
+ uint count;
+ uint n;
+ u16 head;
+ u16 tail;
+
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
/*
- * Initialize tty's
+ * Check if board is still alive.
*/
- if (!(un->un_flags & UN_ISOPEN)) {
- /* Store important variables. */
- un->un_tty = tty;
+ if (ch->ch_bd->state == BOARD_FAILED)
+ return;
- /* Maybe do something here to the TTY struct as well? */
+ /*
+ * Make sure the pointers are in range before
+ * writing to the FEP memory.
+ */
+ vaddr = ch->ch_bd->re_map_membase;
+
+ if (!vaddr)
+ return;
+
+ cm_addr = (struct cm_t __iomem *) (vaddr + CMDBUF);
+ head = readw(&(cm_addr->cm_head));
+
+ /*
+ * Forget it if pointers out of range.
+ */
+ if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
+ ch->ch_bd->state = BOARD_FAILED;
+ return;
}
/*
- * Initialize if neither terminal or printer is open.
+ * Put the data in the circular command buffer.
*/
- if (!((ch->ch_tun.un_flags | ch->ch_pun.un_flags) & UN_ISOPEN)) {
+ writeb(cmd, (vaddr + head + CMDSTART + 0));
+ writeb((u8) ch->ch_portnum, (vaddr + head + CMDSTART + 1));
+ writeb(byte1, (vaddr + head + CMDSTART + 2));
+ writeb(byte2, (vaddr + head + CMDSTART + 3));
- ch->ch_mforce = 0;
- ch->ch_mval = 0;
+ head = (head + 4) & (CMDMAX - CMDSTART - 4);
+
+ writew(head, &(cm_addr->cm_head));
+
+ /*
+ * Wait if necessary before updating the head
+ * pointer to limit the number of outstanding
+ * commands to the FEP. If the time spent waiting
+ * is outlandish, declare the FEP dead.
+ */
+ for (count = dgap_count ;;) {
+
+ head = readw(&(cm_addr->cm_head));
+ tail = readw(&(cm_addr->cm_tail));
+
+ n = (head - tail) & (CMDMAX - CMDSTART - 4);
+
+ if (n <= ncmds * sizeof(struct cm_t))
+ break;
+
+ if (--count == 0) {
+ ch->ch_bd->state = BOARD_FAILED;
+ return;
+ }
+ udelay(10);
+ }
+}
+
+/*=======================================================================
+ *
+ * dgap_cmdw - Sends a 1 word command to the FEP.
+ *
+ * ch - Pointer to channel structure.
+ * cmd - Command to be sent.
+ * word - Integer containing word to be sent.
+ * ncmds - Wait until ncmds or fewer cmds are left
+ * in the cmd buffer before returning.
+ *
+ *=======================================================================*/
+static void dgap_cmdw(struct channel_t *ch, u8 cmd, u16 word, uint ncmds)
+{
+ char __iomem *vaddr;
+ struct __iomem cm_t *cm_addr;
+ uint count;
+ uint n;
+ u16 head;
+ u16 tail;
+
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ /*
+ * Check if board is still alive.
+ */
+ if (ch->ch_bd->state == BOARD_FAILED)
+ return;
+
+ /*
+ * Make sure the pointers are in range before
+ * writing to the FEP memory.
+ */
+ vaddr = ch->ch_bd->re_map_membase;
+ if (!vaddr)
+ return;
+
+ cm_addr = (struct cm_t __iomem *) (vaddr + CMDBUF);
+ head = readw(&(cm_addr->cm_head));
+
+ /*
+ * Forget it if pointers out of range.
+ */
+ if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
+ ch->ch_bd->state = BOARD_FAILED;
+ return;
+ }
+ /*
+ * Put the data in the circular command buffer.
+ */
+ writeb(cmd, (vaddr + head + CMDSTART + 0));
+ writeb((u8) ch->ch_portnum, (vaddr + head + CMDSTART + 1));
+ writew((u16) word, (vaddr + head + CMDSTART + 2));
+
+ head = (head + 4) & (CMDMAX - CMDSTART - 4);
+
+ writew(head, &(cm_addr->cm_head));
+
+ /*
+ * Wait if necessary before updating the head
+ * pointer to limit the number of outstanding
+ * commands to the FEP. If the time spent waiting
+ * is outlandish, declare the FEP dead.
+ */
+ for (count = dgap_count ;;) {
+
+ head = readw(&(cm_addr->cm_head));
+ tail = readw(&(cm_addr->cm_tail));
+
+ n = (head - tail) & (CMDMAX - CMDSTART - 4);
+
+ if (n <= ncmds * sizeof(struct cm_t))
+ break;
+
+ if (--count == 0) {
+ ch->ch_bd->state = BOARD_FAILED;
+ return;
+ }
+ udelay(10);
+ }
+}
+
+/*=======================================================================
+ *
+ * dgap_cmdw_ext - Sends a extended word command to the FEP.
+ *
+ * ch - Pointer to channel structure.
+ * cmd - Command to be sent.
+ * word - Integer containing word to be sent.
+ * ncmds - Wait until ncmds or fewer cmds are left
+ * in the cmd buffer before returning.
+ *
+ *=======================================================================*/
+static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds)
+{
+ char __iomem *vaddr;
+ struct __iomem cm_t *cm_addr;
+ uint count;
+ uint n;
+ u16 head;
+ u16 tail;
+
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ /*
+ * Check if board is still alive.
+ */
+ if (ch->ch_bd->state == BOARD_FAILED)
+ return;
+
+ /*
+ * Make sure the pointers are in range before
+ * writing to the FEP memory.
+ */
+ vaddr = ch->ch_bd->re_map_membase;
+ if (!vaddr)
+ return;
+
+ cm_addr = (struct cm_t __iomem *) (vaddr + CMDBUF);
+ head = readw(&(cm_addr->cm_head));
+
+ /*
+ * Forget it if pointers out of range.
+ */
+ if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
+ ch->ch_bd->state = BOARD_FAILED;
+ return;
+ }
+
+ /*
+ * Put the data in the circular command buffer.
+ */
+
+ /* Write an FF to tell the FEP that we want an extended command */
+ writeb((u8) 0xff, (vaddr + head + CMDSTART + 0));
+
+ writeb((u8) ch->ch_portnum, (vaddr + head + CMDSTART + 1));
+ writew((u16) cmd, (vaddr + head + CMDSTART + 2));
+
+ /*
+ * If the second part of the command won't fit,
+ * put it at the beginning of the circular buffer.
+ */
+ if (((head + 4) >= ((CMDMAX - CMDSTART)) || (head & 03)))
+ writew((u16) word, (vaddr + CMDSTART));
+ else
+ writew((u16) word, (vaddr + head + CMDSTART + 4));
+
+ head = (head + 8) & (CMDMAX - CMDSTART - 4);
+
+ writew(head, &(cm_addr->cm_head));
+
+ /*
+ * Wait if necessary before updating the head
+ * pointer to limit the number of outstanding
+ * commands to the FEP. If the time spent waiting
+ * is outlandish, declare the FEP dead.
+ */
+ for (count = dgap_count ;;) {
+
+ head = readw(&(cm_addr->cm_head));
+ tail = readw(&(cm_addr->cm_tail));
+
+ n = (head - tail) & (CMDMAX - CMDSTART - 4);
+
+ if (n <= ncmds * sizeof(struct cm_t))
+ break;
+
+ if (--count == 0) {
+ ch->ch_bd->state = BOARD_FAILED;
+ return;
+ }
+ udelay(10);
+ }
+}
+
+/*=======================================================================
+ *
+ * dgap_wmove - Write data to FEP buffer.
+ *
+ * ch - Pointer to channel structure.
+ * buf - Poiter to characters to be moved.
+ * cnt - Number of characters to move.
+ *
+ *=======================================================================*/
+static void dgap_wmove(struct channel_t *ch, char *buf, uint cnt)
+{
+ int n;
+ char __iomem *taddr;
+ struct bs_t __iomem *bs;
+ u16 head;
+
+ if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+ return;
+
+ /*
+ * Check parameters.
+ */
+ bs = ch->ch_bs;
+ head = readw(&(bs->tx_head));
+
+ /*
+ * If pointers are out of range, just return.
+ */
+ if ((cnt > ch->ch_tsize) ||
+ (unsigned)(head - ch->ch_tstart) >= ch->ch_tsize)
+ return;
+
+ /*
+ * If the write wraps over the top of the circular buffer,
+ * move the portion up to the wrap point, and reset the
+ * pointers to the bottom.
+ */
+ n = ch->ch_tstart + ch->ch_tsize - head;
+
+ if (cnt >= n) {
+ cnt -= n;
+ taddr = ch->ch_taddr + head;
+ memcpy_toio(taddr, buf, n);
+ head = ch->ch_tstart;
+ buf += n;
+ }
+
+ /*
+ * Move rest of data.
+ */
+ taddr = ch->ch_taddr + head;
+ n = cnt;
+ memcpy_toio(taddr, buf, n);
+ head += cnt;
+
+ writew(head, &(bs->tx_head));
+}
+
+/*
+ * Calls the firmware to reset this channel.
+ */
+static void dgap_firmware_reset_port(struct channel_t *ch)
+{
+ dgap_cmdb(ch, CHRESET, 0, 0, 0);
+
+ /*
+ * Now that the channel is reset, we need to make sure
+ * all the current settings get reapplied to the port
+ * in the firmware.
+ *
+ * So we will set the driver's cache of firmware
+ * settings all to 0, and then call param.
+ */
+ ch->ch_fepiflag = 0;
+ ch->ch_fepcflag = 0;
+ ch->ch_fepoflag = 0;
+ ch->ch_fepstartc = 0;
+ ch->ch_fepstopc = 0;
+ ch->ch_fepastartc = 0;
+ ch->ch_fepastopc = 0;
+ ch->ch_mostat = 0;
+ ch->ch_hflow = 0;
+}
+
+/*=======================================================================
+ *
+ * dgap_param - Set Digi parameters.
+ *
+ * struct tty_struct * - TTY for port.
+ *
+ *=======================================================================*/
+static int dgap_param(struct channel_t *ch, struct board_t *bd, u32 un_type)
+{
+ u16 head;
+ u16 cflag;
+ u16 iflag;
+ u8 mval;
+ u8 hflow;
+
+ /*
+ * If baud rate is zero, flush queues, and set mval to drop DTR.
+ */
+ if ((ch->ch_c_cflag & (CBAUD)) == 0) {
+
+ /* flush rx */
+ head = readw(&(ch->ch_bs->rx_head));
+ writew(head, &(ch->ch_bs->rx_tail));
+
+ /* flush tx */
+ head = readw(&(ch->ch_bs->tx_head));
+ writew(head, &(ch->ch_bs->tx_tail));
+
+ ch->ch_flags |= (CH_BAUD0);
+
+ /* Drop RTS and DTR */
+ ch->ch_mval &= ~(D_RTS(ch)|D_DTR(ch));
+ mval = D_DTR(ch) | D_RTS(ch);
+ ch->ch_baud_info = 0;
+
+ } else if (ch->ch_custom_speed && (bd->bd_flags & BD_FEP5PLUS)) {
/*
- * Flush input queue.
+ * Tell the fep to do the command
*/
- head = readw(&(bs->rx_head));
- writew(head, &(bs->rx_tail));
- ch->ch_flags = 0;
- ch->pscan_state = 0;
- ch->pscan_savechar = 0;
+ dgap_cmdw_ext(ch, 0xff01, ch->ch_custom_speed, 0);
- ch->ch_c_cflag = tty->termios.c_cflag;
- ch->ch_c_iflag = tty->termios.c_iflag;
- ch->ch_c_oflag = tty->termios.c_oflag;
- ch->ch_c_lflag = tty->termios.c_lflag;
- ch->ch_startc = tty->termios.c_cc[VSTART];
- ch->ch_stopc = tty->termios.c_cc[VSTOP];
+ /*
+ * Now go get from fep mem, what the fep
+ * believes the custom baud rate is.
+ */
+ ch->ch_custom_speed = dgap_get_custom_baud(ch);
+ ch->ch_baud_info = ch->ch_custom_speed;
- /* TODO: flush our TTY struct here? */
+ /* Handle transition from B0 */
+ if (ch->ch_flags & CH_BAUD0) {
+ ch->ch_flags &= ~(CH_BAUD0);
+ ch->ch_mval |= (D_RTS(ch)|D_DTR(ch));
+ }
+ mval = D_DTR(ch) | D_RTS(ch);
+
+ } else {
+ /*
+ * Set baud rate, character size, and parity.
+ */
+
+
+ int iindex = 0;
+ int jindex = 0;
+ int baud = 0;
+
+ ulong bauds[4][16] = {
+ { /* slowbaud */
+ 0, 50, 75, 110,
+ 134, 150, 200, 300,
+ 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 },
+ { /* slowbaud & CBAUDEX */
+ 0, 57600, 115200, 230400,
+ 460800, 150, 200, 921600,
+ 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 },
+ { /* fastbaud */
+ 0, 57600, 76800, 115200,
+ 14400, 57600, 230400, 76800,
+ 115200, 230400, 28800, 460800,
+ 921600, 9600, 19200, 38400 },
+ { /* fastbaud & CBAUDEX */
+ 0, 57600, 115200, 230400,
+ 460800, 150, 200, 921600,
+ 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 }
+ };
+
+ /*
+ * Only use the TXPrint baud rate if the
+ * terminal unit is NOT open
+ */
+ if (!(ch->ch_tun.un_flags & UN_ISOPEN) &&
+ un_type == DGAP_PRINT)
+ baud = C_BAUD(ch->ch_pun.un_tty) & 0xff;
+ else
+ baud = C_BAUD(ch->ch_tun.un_tty) & 0xff;
+
+ if (ch->ch_c_cflag & CBAUDEX)
+ iindex = 1;
+
+ if (ch->ch_digi.digi_flags & DIGI_FAST)
+ iindex += 2;
+
+ jindex = baud;
+
+ if ((iindex >= 0) && (iindex < 4) &&
+ (jindex >= 0) && (jindex < 16))
+ baud = bauds[iindex][jindex];
+ else
+ baud = 0;
+
+ if (baud == 0)
+ baud = 9600;
+
+ ch->ch_baud_info = baud;
+
+ /*
+ * CBAUD has bit position 0x1000 set these days to
+ * indicate Linux baud rate remap.
+ * We use a different bit assignment for high speed.
+ * Clear this bit out while grabbing the parts of
+ * "cflag" we want.
+ */
+ cflag = ch->ch_c_cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB |
+ CSTOPB | CSIZE);
+
+ /*
+ * HUPCL bit is used by FEP to indicate fast baud
+ * table is to be used.
+ */
+ if ((ch->ch_digi.digi_flags & DIGI_FAST) ||
+ (ch->ch_c_cflag & CBAUDEX))
+ cflag |= HUPCL;
+
+ if ((ch->ch_c_cflag & CBAUDEX) &&
+ !(ch->ch_digi.digi_flags & DIGI_FAST)) {
+ /*
+ * The below code is trying to guarantee that only
+ * baud rates 115200, 230400, 460800, 921600 are
+ * remapped. We use exclusive or because the various
+ * baud rates share common bit positions and therefore
+ * can't be tested for easily.
+ */
+ tcflag_t tcflag = (ch->ch_c_cflag & CBAUD) | CBAUDEX;
+ int baudpart = 0;
+
+ /*
+ * Map high speed requests to index
+ * into FEP's baud table
+ */
+ switch (tcflag) {
+ case B57600:
+ baudpart = 1;
+ break;
+#ifdef B76800
+ case B76800:
+ baudpart = 2;
+ break;
+#endif
+ case B115200:
+ baudpart = 3;
+ break;
+ case B230400:
+ baudpart = 9;
+ break;
+ case B460800:
+ baudpart = 11;
+ break;
+#ifdef B921600
+ case B921600:
+ baudpart = 12;
+ break;
+#endif
+ default:
+ baudpart = 0;
+ }
+
+ if (baudpart)
+ cflag = (cflag & ~(CBAUD | CBAUDEX)) | baudpart;
+ }
+
+ cflag &= 0xffff;
+
+ if (cflag != ch->ch_fepcflag) {
+ ch->ch_fepcflag = (u16) (cflag & 0xffff);
+
+ /*
+ * Okay to have channel and board
+ * locks held calling this
+ */
+ dgap_cmdw(ch, SCFLAG, (u16) cflag, 0);
+ }
+
+ /* Handle transition from B0 */
+ if (ch->ch_flags & CH_BAUD0) {
+ ch->ch_flags &= ~(CH_BAUD0);
+ ch->ch_mval |= (D_RTS(ch)|D_DTR(ch));
+ }
+ mval = D_DTR(ch) | D_RTS(ch);
}
- dgap_carrier(ch);
/*
- * Run param in case we changed anything
+ * Get input flags.
*/
- dgap_param(ch, brd, un->un_type);
+ iflag = ch->ch_c_iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK |
+ INPCK | ISTRIP | IXON | IXANY | IXOFF);
+
+ if ((ch->ch_startc == _POSIX_VDISABLE) ||
+ (ch->ch_stopc == _POSIX_VDISABLE)) {
+ iflag &= ~(IXON | IXOFF);
+ ch->ch_c_iflag &= ~(IXON | IXOFF);
+ }
/*
- * follow protocol for opening port
+ * Only the IBM Xr card can switch between
+ * 232 and 422 modes on the fly
*/
+ if (bd->device == PCI_DEV_XR_IBM_DID) {
+ if (ch->ch_digi.digi_flags & DIGI_422)
+ dgap_cmdb(ch, SCOMMODE, MODE_422, 0, 0);
+ else
+ dgap_cmdb(ch, SCOMMODE, MODE_232, 0, 0);
+ }
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
- spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
+ if (ch->ch_digi.digi_flags & DIGI_ALTPIN)
+ iflag |= IALTPIN;
- rc = dgap_block_til_ready(tty, file, ch);
+ if (iflag != ch->ch_fepiflag) {
+ ch->ch_fepiflag = iflag;
- if (!un->un_tty)
- return -ENODEV;
+ /* Okay to have channel and board locks held calling this */
+ dgap_cmdw(ch, SIFLAG, (u16) ch->ch_fepiflag, 0);
+ }
- /* No going back now, increment our unit and channel counters */
- spin_lock_irqsave(&ch->ch_lock, lock_flags);
- ch->ch_open_count++;
- un->un_open_count++;
- un->un_flags |= (UN_ISOPEN);
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ /*
+ * Select hardware handshaking.
+ */
+ hflow = 0;
- return rc;
+ if (ch->ch_c_cflag & CRTSCTS)
+ hflow |= (D_RTS(ch) | D_CTS(ch));
+ if (ch->ch_digi.digi_flags & RTSPACE)
+ hflow |= D_RTS(ch);
+ if (ch->ch_digi.digi_flags & DTRPACE)
+ hflow |= D_DTR(ch);
+ if (ch->ch_digi.digi_flags & CTSPACE)
+ hflow |= D_CTS(ch);
+ if (ch->ch_digi.digi_flags & DSRPACE)
+ hflow |= D_DSR(ch);
+ if (ch->ch_digi.digi_flags & DCDPACE)
+ hflow |= D_CD(ch);
+
+ if (hflow != ch->ch_hflow) {
+ ch->ch_hflow = hflow;
+
+ /* Okay to have channel and board locks held calling this */
+ dgap_cmdb(ch, SHFLOW, (u8) hflow, 0xff, 0);
+ }
+
+ /*
+ * Set RTS and/or DTR Toggle if needed,
+ * but only if product is FEP5+ based.
+ */
+ if (bd->bd_flags & BD_FEP5PLUS) {
+ u16 hflow2 = 0;
+
+ if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE)
+ hflow2 |= (D_RTS(ch));
+ if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE)
+ hflow2 |= (D_DTR(ch));
+
+ dgap_cmdw_ext(ch, 0xff03, hflow2, 0);
+ }
+
+ /*
+ * Set modem control lines.
+ */
+
+ mval ^= ch->ch_mforce & (mval ^ ch->ch_mval);
+
+ if (ch->ch_mostat ^ mval) {
+ ch->ch_mostat = mval;
+
+ /* Okay to have channel and board locks held calling this */
+ dgap_cmdb(ch, SMODEM, (u8) mval, D_RTS(ch)|D_DTR(ch), 0);
+ }
+
+ /*
+ * Read modem signals, and then call carrier function.
+ */
+ ch->ch_mistat = readb(&(ch->ch_bs->m_stat));
+ dgap_carrier(ch);
+
+ /*
+ * Set the start and stop characters.
+ */
+ if (ch->ch_startc != ch->ch_fepstartc ||
+ ch->ch_stopc != ch->ch_fepstopc) {
+ ch->ch_fepstartc = ch->ch_startc;
+ ch->ch_fepstopc = ch->ch_stopc;
+
+ /* Okay to have channel and board locks held calling this */
+ dgap_cmdb(ch, SFLOWC, ch->ch_fepstartc, ch->ch_fepstopc, 0);
+ }
+
+ /*
+ * Set the Auxiliary start and stop characters.
+ */
+ if (ch->ch_astartc != ch->ch_fepastartc ||
+ ch->ch_astopc != ch->ch_fepastopc) {
+ ch->ch_fepastartc = ch->ch_astartc;
+ ch->ch_fepastopc = ch->ch_astopc;
+
+ /* Okay to have channel and board locks held calling this */
+ dgap_cmdb(ch, SAFLOWC, ch->ch_fepastartc, ch->ch_fepastopc, 0);
+ }
+
+ return 0;
}
/*
@@ -2155,15 +3194,18 @@ static int dgap_block_til_ready(struct tty_struct *tty, struct file *file,
}
/*
- * dgap_tty_hangup()
+ * dgap_tty_flush_buffer()
*
- * Hangup the port. Like a close, but don't wait for output to drain.
+ * Flush Tx buffer (make in == out)
*/
-static void dgap_tty_hangup(struct tty_struct *tty)
+static void dgap_tty_flush_buffer(struct tty_struct *tty)
{
struct board_t *bd;
struct channel_t *ch;
struct un_t *un;
+ ulong lock_flags;
+ ulong lock_flags2;
+ u16 head;
if (!tty || tty->magic != TTY_MAGIC)
return;
@@ -2180,21 +3222,39 @@ static void dgap_tty_hangup(struct tty_struct *tty)
if (!bd || bd->magic != DGAP_BOARD_MAGIC)
return;
- /* flush the transmit queues */
- dgap_tty_flush_buffer(tty);
+ spin_lock_irqsave(&bd->bd_lock, lock_flags);
+ spin_lock_irqsave(&ch->ch_lock, lock_flags2);
+
+ ch->ch_flags &= ~CH_STOP;
+ head = readw(&(ch->ch_bs->tx_head));
+ dgap_cmdw(ch, FLUSHTX, (u16) head, 0);
+ dgap_cmdw(ch, RESUMETX, 0, 0);
+ if (ch->ch_tun.un_flags & (UN_LOW|UN_EMPTY)) {
+ ch->ch_tun.un_flags &= ~(UN_LOW|UN_EMPTY);
+ wake_up_interruptible(&ch->ch_tun.un_flags_wait);
+ }
+ if (ch->ch_pun.un_flags & (UN_LOW|UN_EMPTY)) {
+ ch->ch_pun.un_flags &= ~(UN_LOW|UN_EMPTY);
+ wake_up_interruptible(&ch->ch_pun.un_flags_wait);
+ }
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+ spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
+ if (waitqueue_active(&tty->write_wait))
+ wake_up_interruptible(&tty->write_wait);
+ tty_wakeup(tty);
}
/*
- * dgap_tty_close()
+ * dgap_tty_hangup()
*
+ * Hangup the port. Like a close, but don't wait for output to drain.
*/
-static void dgap_tty_close(struct tty_struct *tty, struct file *file)
+static void dgap_tty_hangup(struct tty_struct *tty)
{
- struct ktermios *ts;
struct board_t *bd;
struct channel_t *ch;
struct un_t *un;
- ulong lock_flags;
if (!tty || tty->magic != TTY_MAGIC)
return;
@@ -2211,107 +3271,8 @@ static void dgap_tty_close(struct tty_struct *tty, struct file *file)
if (!bd || bd->magic != DGAP_BOARD_MAGIC)
return;
- ts = &tty->termios;
-
- spin_lock_irqsave(&ch->ch_lock, lock_flags);
-
- /*
- * Determine if this is the last close or not - and if we agree about
- * which type of close it is with the Line Discipline
- */
- if ((tty->count == 1) && (un->un_open_count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. un_open_count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- un->un_open_count = 1;
- }
-
- if (--un->un_open_count < 0)
- un->un_open_count = 0;
-
- ch->ch_open_count--;
-
- if (ch->ch_open_count && un->un_open_count) {
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
- return;
- }
-
- /* OK, its the last close on the unit */
-
- un->un_flags |= UN_CLOSING;
-
- tty->closing = 1;
-
- /*
- * Only officially close channel if count is 0 and
- * DIGI_PRINTER bit is not set.
- */
- if ((ch->ch_open_count == 0) &&
- !(ch->ch_digi.digi_flags & DIGI_PRINTER)) {
-
- ch->ch_flags &= ~(CH_RXBLOCK);
-
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
- /* wait for output to drain */
- /* This will also return if we take an interrupt */
-
- dgap_wait_for_drain(tty);
-
- dgap_tty_flush_buffer(tty);
- tty_ldisc_flush(tty);
-
- spin_lock_irqsave(&ch->ch_lock, lock_flags);
-
- tty->closing = 0;
-
- /*
- * If we have HUPCL set, lower DTR and RTS
- */
- if (ch->ch_c_cflag & HUPCL) {
- ch->ch_mostat &= ~(D_RTS(ch)|D_DTR(ch));
- dgap_cmdb(ch, SMODEM, 0, D_DTR(ch)|D_RTS(ch), 0);
-
- /*
- * Go to sleep to ensure RTS/DTR
- * have been dropped for modems to see it.
- */
- spin_unlock_irqrestore(&ch->ch_lock,
- lock_flags);
-
- /* .25 second delay for dropping RTS/DTR */
- schedule_timeout_interruptible(msecs_to_jiffies(250));
-
- spin_lock_irqsave(&ch->ch_lock, lock_flags);
- }
-
- ch->pscan_state = 0;
- ch->pscan_savechar = 0;
- ch->ch_baud_info = 0;
-
- }
-
- /*
- * turn off print device when closing print device.
- */
- if ((un->un_type == DGAP_PRINT) && (ch->ch_flags & CH_PRON)) {
- dgap_wmove(ch, ch->ch_digi.digi_offstr,
- (int) ch->ch_digi.digi_offlen);
- ch->ch_flags &= ~CH_PRON;
- }
-
- un->un_tty = NULL;
- un->un_flags &= ~(UN_ISOPEN | UN_CLOSING);
- tty->driver_data = NULL;
-
- wake_up_interruptible(&ch->ch_flags_wait);
- wake_up_interruptible(&un->un_flags_wait);
-
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ /* flush the transmit queues */
+ dgap_tty_flush_buffer(tty);
}
/*
@@ -2611,22 +3572,6 @@ static int dgap_tty_write_room(struct tty_struct *tty)
}
/*
- * dgap_tty_put_char()
- *
- * Put a character into ch->ch_buf
- *
- * - used by the line discipline for OPOST processing
- */
-static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c)
-{
- /*
- * Simply call tty_write.
- */
- dgap_tty_write(tty, &c, 1);
- return 1;
-}
-
-/*
* dgap_tty_write()
*
* Take data from the user or kernel and send it out to the FEP.
@@ -2788,6 +3733,22 @@ static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf,
}
/*
+ * dgap_tty_put_char()
+ *
+ * Put a character into ch->ch_buf
+ *
+ * - used by the line discipline for OPOST processing
+ */
+static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c)
+{
+ /*
+ * Simply call tty_write.
+ */
+ dgap_tty_write(tty, &c, 1);
+ return 1;
+}
+
+/*
* Return modem signals to ld.
*/
static int dgap_tty_tiocmget(struct tty_struct *tty)
@@ -3448,13 +4409,176 @@ static void dgap_tty_unthrottle(struct tty_struct *tty)
spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
}
-static void dgap_tty_start(struct tty_struct *tty)
+/************************************************************************
+ *
+ * TTY Entry points and helper functions
+ *
+ ************************************************************************/
+
+/*
+ * dgap_tty_open()
+ *
+ */
+static int dgap_tty_open(struct tty_struct *tty, struct file *file)
{
- struct board_t *bd;
+ struct board_t *brd;
struct channel_t *ch;
struct un_t *un;
+ struct bs_t __iomem *bs;
+ uint major;
+ uint minor;
+ int rc;
ulong lock_flags;
ulong lock_flags2;
+ u16 head;
+
+ major = MAJOR(tty_devnum(tty));
+ minor = MINOR(tty_devnum(tty));
+
+ if (major > 255)
+ return -EIO;
+
+ /* Get board pointer from our array of majors we have allocated */
+ brd = dgap_boards_by_major[major];
+ if (!brd)
+ return -EIO;
+
+ /*
+ * If board is not yet up to a state of READY, go to
+ * sleep waiting for it to happen or they cancel the open.
+ */
+ rc = wait_event_interruptible(brd->state_wait,
+ (brd->state & BOARD_READY));
+
+ if (rc)
+ return rc;
+
+ spin_lock_irqsave(&brd->bd_lock, lock_flags);
+
+ /* The wait above should guarantee this cannot happen */
+ if (brd->state != BOARD_READY) {
+ spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
+ return -EIO;
+ }
+
+ /* If opened device is greater than our number of ports, bail. */
+ if (MINOR(tty_devnum(tty)) > brd->nasync) {
+ spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
+ return -EIO;
+ }
+
+ ch = brd->channels[minor];
+ if (!ch) {
+ spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
+ return -EIO;
+ }
+
+ /* Grab channel lock */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags2);
+
+ /* Figure out our type */
+ if (major == brd->dgap_serial_major) {
+ un = &brd->channels[minor]->ch_tun;
+ un->un_type = DGAP_SERIAL;
+ } else if (major == brd->dgap_transparent_print_major) {
+ un = &brd->channels[minor]->ch_pun;
+ un->un_type = DGAP_PRINT;
+ } else {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+ spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
+ return -EIO;
+ }
+
+ /* Store our unit into driver_data, so we always have it available. */
+ tty->driver_data = un;
+
+ /*
+ * Error if channel info pointer is NULL.
+ */
+ bs = ch->ch_bs;
+ if (!bs) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+ spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
+ return -EIO;
+ }
+
+ /*
+ * Initialize tty's
+ */
+ if (!(un->un_flags & UN_ISOPEN)) {
+ /* Store important variables. */
+ un->un_tty = tty;
+
+ /* Maybe do something here to the TTY struct as well? */
+ }
+
+ /*
+ * Initialize if neither terminal or printer is open.
+ */
+ if (!((ch->ch_tun.un_flags | ch->ch_pun.un_flags) & UN_ISOPEN)) {
+
+ ch->ch_mforce = 0;
+ ch->ch_mval = 0;
+
+ /*
+ * Flush input queue.
+ */
+ head = readw(&(bs->rx_head));
+ writew(head, &(bs->rx_tail));
+
+ ch->ch_flags = 0;
+ ch->pscan_state = 0;
+ ch->pscan_savechar = 0;
+
+ ch->ch_c_cflag = tty->termios.c_cflag;
+ ch->ch_c_iflag = tty->termios.c_iflag;
+ ch->ch_c_oflag = tty->termios.c_oflag;
+ ch->ch_c_lflag = tty->termios.c_lflag;
+ ch->ch_startc = tty->termios.c_cc[VSTART];
+ ch->ch_stopc = tty->termios.c_cc[VSTOP];
+
+ /* TODO: flush our TTY struct here? */
+ }
+
+ dgap_carrier(ch);
+ /*
+ * Run param in case we changed anything
+ */
+ dgap_param(ch, brd, un->un_type);
+
+ /*
+ * follow protocol for opening port
+ */
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+ spin_unlock_irqrestore(&brd->bd_lock, lock_flags);
+
+ rc = dgap_block_til_ready(tty, file, ch);
+
+ if (!un->un_tty)
+ return -ENODEV;
+
+ /* No going back now, increment our unit and channel counters */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_open_count++;
+ un->un_open_count++;
+ un->un_flags |= (UN_ISOPEN);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ return rc;
+}
+
+/*
+ * dgap_tty_close()
+ *
+ */
+static void dgap_tty_close(struct tty_struct *tty, struct file *file)
+{
+ struct ktermios *ts;
+ struct board_t *bd;
+ struct channel_t *ch;
+ struct un_t *un;
+ ulong lock_flags;
if (!tty || tty->magic != TTY_MAGIC)
return;
@@ -3471,16 +4595,110 @@ static void dgap_tty_start(struct tty_struct *tty)
if (!bd || bd->magic != DGAP_BOARD_MAGIC)
return;
- spin_lock_irqsave(&bd->bd_lock, lock_flags);
- spin_lock_irqsave(&ch->ch_lock, lock_flags2);
+ ts = &tty->termios;
- dgap_cmdw(ch, RESUMETX, 0, 0);
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
+ /*
+ * Determine if this is the last close or not - and if we agree about
+ * which type of close it is with the Line Discipline
+ */
+ if ((tty->count == 1) && (un->un_open_count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. un_open_count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ un->un_open_count = 1;
+ }
+
+ if (--un->un_open_count < 0)
+ un->un_open_count = 0;
+
+ ch->ch_open_count--;
+
+ if (ch->ch_open_count && un->un_open_count) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+
+ /* OK, its the last close on the unit */
+
+ un->un_flags |= UN_CLOSING;
+
+ tty->closing = 1;
+
+ /*
+ * Only officially close channel if count is 0 and
+ * DIGI_PRINTER bit is not set.
+ */
+ if ((ch->ch_open_count == 0) &&
+ !(ch->ch_digi.digi_flags & DIGI_PRINTER)) {
+
+ ch->ch_flags &= ~(CH_RXBLOCK);
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ /* wait for output to drain */
+ /* This will also return if we take an interrupt */
+
+ dgap_wait_for_drain(tty);
+
+ dgap_tty_flush_buffer(tty);
+ tty_ldisc_flush(tty);
+
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+
+ tty->closing = 0;
+
+ /*
+ * If we have HUPCL set, lower DTR and RTS
+ */
+ if (ch->ch_c_cflag & HUPCL) {
+ ch->ch_mostat &= ~(D_RTS(ch)|D_DTR(ch));
+ dgap_cmdb(ch, SMODEM, 0, D_DTR(ch)|D_RTS(ch), 0);
+
+ /*
+ * Go to sleep to ensure RTS/DTR
+ * have been dropped for modems to see it.
+ */
+ spin_unlock_irqrestore(&ch->ch_lock,
+ lock_flags);
+
+ /* .25 second delay for dropping RTS/DTR */
+ schedule_timeout_interruptible(msecs_to_jiffies(250));
+
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ }
+
+ ch->pscan_state = 0;
+ ch->pscan_savechar = 0;
+ ch->ch_baud_info = 0;
+
+ }
+
+ /*
+ * turn off print device when closing print device.
+ */
+ if ((un->un_type == DGAP_PRINT) && (ch->ch_flags & CH_PRON)) {
+ dgap_wmove(ch, ch->ch_digi.digi_offstr,
+ (int) ch->ch_digi.digi_offlen);
+ ch->ch_flags &= ~CH_PRON;
+ }
+
+ un->un_tty = NULL;
+ un->un_flags &= ~(UN_ISOPEN | UN_CLOSING);
+ tty->driver_data = NULL;
+
+ wake_up_interruptible(&ch->ch_flags_wait);
+ wake_up_interruptible(&un->un_flags_wait);
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
}
-static void dgap_tty_stop(struct tty_struct *tty)
+static void dgap_tty_start(struct tty_struct *tty)
{
struct board_t *bd;
struct channel_t *ch;
@@ -3506,26 +4724,13 @@ static void dgap_tty_stop(struct tty_struct *tty)
spin_lock_irqsave(&bd->bd_lock, lock_flags);
spin_lock_irqsave(&ch->ch_lock, lock_flags2);
- dgap_cmdw(ch, PAUSETX, 0, 0);
+ dgap_cmdw(ch, RESUMETX, 0, 0);
spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
}
-/*
- * dgap_tty_flush_chars()
- *
- * Flush the cook buffer
- *
- * Note to self, and any other poor souls who venture here:
- *
- * flush in this case DOES NOT mean dispose of the data.
- * instead, it means "stop buffering and send it if you
- * haven't already." Just guess how I figured that out... SRW 2-Jun-98
- *
- * It is also always called in interrupt context - JAR 8-Sept-99
- */
-static void dgap_tty_flush_chars(struct tty_struct *tty)
+static void dgap_tty_stop(struct tty_struct *tty)
{
struct board_t *bd;
struct channel_t *ch;
@@ -3551,25 +4756,32 @@ static void dgap_tty_flush_chars(struct tty_struct *tty)
spin_lock_irqsave(&bd->bd_lock, lock_flags);
spin_lock_irqsave(&ch->ch_lock, lock_flags2);
- /* TODO: Do something here */
+ dgap_cmdw(ch, PAUSETX, 0, 0);
spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
}
/*
- * dgap_tty_flush_buffer()
+ * dgap_tty_flush_chars()
*
- * Flush Tx buffer (make in == out)
+ * Flush the cook buffer
+ *
+ * Note to self, and any other poor souls who venture here:
+ *
+ * flush in this case DOES NOT mean dispose of the data.
+ * instead, it means "stop buffering and send it if you
+ * haven't already." Just guess how I figured that out... SRW 2-Jun-98
+ *
+ * It is also always called in interrupt context - JAR 8-Sept-99
*/
-static void dgap_tty_flush_buffer(struct tty_struct *tty)
+static void dgap_tty_flush_chars(struct tty_struct *tty)
{
struct board_t *bd;
struct channel_t *ch;
struct un_t *un;
ulong lock_flags;
ulong lock_flags2;
- u16 head;
if (!tty || tty->magic != TTY_MAGIC)
return;
@@ -3589,24 +4801,10 @@ static void dgap_tty_flush_buffer(struct tty_struct *tty)
spin_lock_irqsave(&bd->bd_lock, lock_flags);
spin_lock_irqsave(&ch->ch_lock, lock_flags2);
- ch->ch_flags &= ~CH_STOP;
- head = readw(&(ch->ch_bs->tx_head));
- dgap_cmdw(ch, FLUSHTX, (u16) head, 0);
- dgap_cmdw(ch, RESUMETX, 0, 0);
- if (ch->ch_tun.un_flags & (UN_LOW|UN_EMPTY)) {
- ch->ch_tun.un_flags &= ~(UN_LOW|UN_EMPTY);
- wake_up_interruptible(&ch->ch_tun.un_flags_wait);
- }
- if (ch->ch_pun.un_flags & (UN_LOW|UN_EMPTY)) {
- ch->ch_pun.un_flags &= ~(UN_LOW|UN_EMPTY);
- wake_up_interruptible(&ch->ch_pun.un_flags_wait);
- }
+ /* TODO: Do something here */
spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
- if (waitqueue_active(&tty->write_wait))
- wake_up_interruptible(&tty->write_wait);
- tty_wakeup(tty);
}
/*****************************************************************************
@@ -4000,1614 +5198,173 @@ static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
}
}
-static int dgap_alloc_flipbuf(struct board_t *brd)
-{
- /*
- * allocate flip buffer for board.
- */
- brd->flipbuf = kmalloc(MYFLIPLEN, GFP_KERNEL);
- if (!brd->flipbuf)
- return -ENOMEM;
-
- brd->flipflagbuf = kmalloc(MYFLIPLEN, GFP_KERNEL);
- if (!brd->flipflagbuf) {
- kfree(brd->flipbuf);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static void dgap_free_flipbuf(struct board_t *brd)
-{
- kfree(brd->flipbuf);
- kfree(brd->flipflagbuf);
-}
-
-/*
- * Create pr and tty device entries
- */
-static int dgap_tty_register_ports(struct board_t *brd)
-{
- struct channel_t *ch;
- int i;
- int ret;
-
- brd->serial_ports = kcalloc(brd->nasync, sizeof(*brd->serial_ports),
- GFP_KERNEL);
- if (!brd->serial_ports)
- return -ENOMEM;
-
- brd->printer_ports = kcalloc(brd->nasync, sizeof(*brd->printer_ports),
- GFP_KERNEL);
- if (!brd->printer_ports) {
- ret = -ENOMEM;
- goto free_serial_ports;
- }
-
- for (i = 0; i < brd->nasync; i++) {
- tty_port_init(&brd->serial_ports[i]);
- tty_port_init(&brd->printer_ports[i]);
- }
-
- ch = brd->channels[0];
- for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
-
- struct device *classp;
-
- classp = tty_port_register_device(&brd->serial_ports[i],
- brd->serial_driver,
- i, NULL);
-
- if (IS_ERR(classp)) {
- ret = PTR_ERR(classp);
- goto unregister_ttys;
- }
-
- dgap_create_tty_sysfs(&ch->ch_tun, classp);
- ch->ch_tun.un_sysfs = classp;
-
- classp = tty_port_register_device(&brd->printer_ports[i],
- brd->print_driver,
- i, NULL);
-
- if (IS_ERR(classp)) {
- ret = PTR_ERR(classp);
- goto unregister_ttys;
- }
-
- dgap_create_tty_sysfs(&ch->ch_pun, classp);
- ch->ch_pun.un_sysfs = classp;
- }
- dgap_create_ports_sysfiles(brd);
-
- return 0;
-
-unregister_ttys:
- while (i >= 0) {
- ch = brd->channels[i];
- if (ch->ch_tun.un_sysfs) {
- dgap_remove_tty_sysfs(ch->ch_tun.un_sysfs);
- tty_unregister_device(brd->serial_driver, i);
- }
-
- if (ch->ch_pun.un_sysfs) {
- dgap_remove_tty_sysfs(ch->ch_pun.un_sysfs);
- tty_unregister_device(brd->print_driver, i);
- }
- i--;
- }
-
- for (i = 0; i < brd->nasync; i++) {
- tty_port_destroy(&brd->serial_ports[i]);
- tty_port_destroy(&brd->printer_ports[i]);
- }
-
- kfree(brd->printer_ports);
- brd->printer_ports = NULL;
-
-free_serial_ports:
- kfree(brd->serial_ports);
- brd->serial_ports = NULL;
-
- return ret;
-}
-
-/*
- * Copies the BIOS code from the user to the board,
- * and starts the BIOS running.
- */
-static void dgap_do_bios_load(struct board_t *brd, const u8 *ubios, int len)
-{
- u8 __iomem *addr;
- uint offset;
- int i;
-
- if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
- return;
-
- addr = brd->re_map_membase;
-
- /*
- * clear POST area
- */
- for (i = 0; i < 16; i++)
- writeb(0, addr + POSTAREA + i);
-
- /*
- * Download bios
- */
- offset = 0x1000;
- memcpy_toio(addr + offset, ubios, len);
-
- writel(0x0bf00401, addr);
- writel(0, (addr + 4));
-
- /* Clear the reset, and change states. */
- writeb(FEPCLR, brd->re_map_port);
-}
-
-/*
- * Checks to see if the BIOS completed running on the card.
- */
-static int dgap_test_bios(struct board_t *brd)
-{
- u8 __iomem *addr;
- u16 word;
- u16 err1;
- u16 err2;
-
- if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
- return -EINVAL;
-
- addr = brd->re_map_membase;
- word = readw(addr + POSTAREA);
-
- /*
- * It can take 5-6 seconds for a board to
- * pass the bios self test and post results.
- * Give it 10 seconds.
- */
- brd->wait_for_bios = 0;
- while (brd->wait_for_bios < 1000) {
- /* Check to see if BIOS thinks board is good. (GD). */
- if (word == *(u16 *) "GD")
- return 0;
- msleep_interruptible(10);
- brd->wait_for_bios++;
- word = readw(addr + POSTAREA);
- }
-
- /* Gave up on board after too long of time taken */
- err1 = readw(addr + SEQUENCE);
- err2 = readw(addr + ERROR);
- dev_warn(&brd->pdev->dev, "%s failed diagnostics. Error #(%x,%x).\n",
- brd->name, err1, err2);
- brd->state = BOARD_FAILED;
- brd->dpastatus = BD_NOBIOS;
-
- return -EIO;
-}
-
-/*
- * Copies the FEP code from the user to the board,
- * and starts the FEP running.
- */
-static void dgap_do_fep_load(struct board_t *brd, const u8 *ufep, int len)
-{
- u8 __iomem *addr;
- uint offset;
-
- if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
- return;
-
- addr = brd->re_map_membase;
-
- /*
- * Download FEP
- */
- offset = 0x1000;
- memcpy_toio(addr + offset, ufep, len);
-
- /*
- * If board is a concentrator product, we need to give
- * it its config string describing how the concentrators look.
- */
- if ((brd->type == PCX) || (brd->type == PEPC)) {
- u8 string[100];
- u8 __iomem *config;
- u8 *xconfig;
- int i = 0;
-
- xconfig = dgap_create_config_string(brd, string);
-
- /* Write string to board memory */
- config = addr + CONFIG;
- for (; i < CONFIGSIZE; i++, config++, xconfig++) {
- writeb(*xconfig, config);
- if ((*xconfig & 0xff) == 0xff)
- break;
- }
- }
-
- writel(0xbfc01004, (addr + 0xc34));
- writel(0x3, (addr + 0xc30));
-
-}
-
-/*
- * Waits for the FEP to report thats its ready for us to use.
- */
-static int dgap_test_fep(struct board_t *brd)
-{
- u8 __iomem *addr;
- u16 word;
- u16 err1;
- u16 err2;
-
- if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
- return -EINVAL;
-
- addr = brd->re_map_membase;
- word = readw(addr + FEPSTAT);
-
- /*
- * It can take 2-3 seconds for the FEP to
- * be up and running. Give it 5 secs.
- */
- brd->wait_for_fep = 0;
- while (brd->wait_for_fep < 500) {
- /* Check to see if FEP is up and running now. */
- if (word == *(u16 *) "OS") {
- /*
- * Check to see if the board can support FEP5+ commands.
- */
- word = readw(addr + FEP5_PLUS);
- if (word == *(u16 *) "5A")
- brd->bd_flags |= BD_FEP5PLUS;
-
- return 0;
- }
- msleep_interruptible(10);
- brd->wait_for_fep++;
- word = readw(addr + FEPSTAT);
- }
-
- /* Gave up on board after too long of time taken */
- err1 = readw(addr + SEQUENCE);
- err2 = readw(addr + ERROR);
- dev_warn(&brd->pdev->dev,
- "FEPOS for %s not functioning. Error #(%x,%x).\n",
- brd->name, err1, err2);
- brd->state = BOARD_FAILED;
- brd->dpastatus = BD_NOFEP;
-
- return -EIO;
-}
-
-/*
- * Physically forces the FEP5 card to reset itself.
- */
-static void dgap_do_reset_board(struct board_t *brd)
-{
- u8 check;
- u32 check1;
- u32 check2;
- int i;
-
- if (!brd || (brd->magic != DGAP_BOARD_MAGIC) ||
- !brd->re_map_membase || !brd->re_map_port)
- return;
-
- /* FEPRST does not vary among supported boards */
- writeb(FEPRST, brd->re_map_port);
-
- for (i = 0; i <= 1000; i++) {
- check = readb(brd->re_map_port) & 0xe;
- if (check == FEPRST)
- break;
- udelay(10);
-
- }
- if (i > 1000) {
- dev_warn(&brd->pdev->dev,
- "dgap: Board not resetting... Failing board.\n");
- brd->state = BOARD_FAILED;
- brd->dpastatus = BD_NOFEP;
- return;
- }
-
- /*
- * Make sure there really is memory out there.
- */
- writel(0xa55a3cc3, (brd->re_map_membase + LOWMEM));
- writel(0x5aa5c33c, (brd->re_map_membase + HIGHMEM));
- check1 = readl(brd->re_map_membase + LOWMEM);
- check2 = readl(brd->re_map_membase + HIGHMEM);
-
- if ((check1 != 0xa55a3cc3) || (check2 != 0x5aa5c33c)) {
- dev_warn(&brd->pdev->dev,
- "No memory at %p for board.\n",
- brd->re_map_membase);
- brd->state = BOARD_FAILED;
- brd->dpastatus = BD_NOFEP;
- return;
- }
-}
-
-#ifdef DIGI_CONCENTRATORS_SUPPORTED
-/*
- * Sends a concentrator image into the FEP5 board.
- */
-static void dgap_do_conc_load(struct board_t *brd, u8 *uaddr, int len)
-{
- char __iomem *vaddr;
- u16 offset;
- struct downld_t *to_dp;
-
- if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
- return;
-
- vaddr = brd->re_map_membase;
-
- offset = readw((u16 *) (vaddr + DOWNREQ));
- to_dp = (struct downld_t *) (vaddr + (int) offset);
- memcpy_toio(to_dp, uaddr, len);
-
- /* Tell card we have data for it */
- writew(0, vaddr + (DOWNREQ));
-
- brd->conc_dl_status = NO_PENDING_CONCENTRATOR_REQUESTS;
-}
-#endif
-
-#define EXPANSION_ROM_SIZE (64 * 1024)
-#define FEP5_ROM_MAGIC (0xFEFFFFFF)
-
-static void dgap_get_vpd(struct board_t *brd)
-{
- u32 magic;
- u32 base_offset;
- u16 rom_offset;
- u16 vpd_offset;
- u16 image_length;
- u16 i;
- u8 byte1;
- u8 byte2;
-
- /*
- * Poke the magic number at the PCI Rom Address location.
- * If VPD is supported, the value read from that address
- * will be non-zero.
- */
- magic = FEP5_ROM_MAGIC;
- pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
- pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic);
-
- /* VPD not supported, bail */
- if (!magic)
- return;
-
- /*
- * To get to the OTPROM memory, we have to send the boards base
- * address or'ed with 1 into the PCI Rom Address location.
- */
- magic = brd->membase | 0x01;
- pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
- pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic);
-
- byte1 = readb(brd->re_map_membase);
- byte2 = readb(brd->re_map_membase + 1);
-
- /*
- * If the board correctly swapped to the OTPROM memory,
- * the first 2 bytes (header) should be 0x55, 0xAA
- */
- if (byte1 == 0x55 && byte2 == 0xAA) {
-
- base_offset = 0;
-
- /*
- * We have to run through all the OTPROM memory looking
- * for the VPD offset.
- */
- while (base_offset <= EXPANSION_ROM_SIZE) {
-
- /*
- * Lots of magic numbers here.
- *
- * The VPD offset is located inside the ROM Data
- * Structure.
- *
- * We also have to remember the length of each
- * ROM Data Structure, so we can "hop" to the next
- * entry if the VPD isn't in the current
- * ROM Data Structure.
- */
- rom_offset = readw(brd->re_map_membase +
- base_offset + 0x18);
- image_length = readw(brd->re_map_membase +
- rom_offset + 0x10) * 512;
- vpd_offset = readw(brd->re_map_membase +
- rom_offset + 0x08);
-
- /* Found the VPD entry */
- if (vpd_offset)
- break;
-
- /* We didn't find a VPD entry, go to next ROM entry. */
- base_offset += image_length;
-
- byte1 = readb(brd->re_map_membase + base_offset);
- byte2 = readb(brd->re_map_membase + base_offset + 1);
-
- /*
- * If the new ROM offset doesn't have 0x55, 0xAA
- * as its header, we have run out of ROM.
- */
- if (byte1 != 0x55 || byte2 != 0xAA)
- break;
- }
-
- /*
- * If we have a VPD offset, then mark the board
- * as having a valid VPD, and copy VPDSIZE (512) bytes of
- * that VPD to the buffer we have in our board structure.
- */
- if (vpd_offset) {
- brd->bd_flags |= BD_HAS_VPD;
- for (i = 0; i < VPDSIZE; i++) {
- brd->vpd[i] = readb(brd->re_map_membase +
- vpd_offset + i);
- }
- }
- }
-
- /*
- * We MUST poke the magic number at the PCI Rom Address location again.
- * This makes the card report the regular board memory back to us,
- * rather than the OTPROM memory.
- */
- magic = FEP5_ROM_MAGIC;
- pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
-}
-
-/*
- * Our board poller function.
- */
-static void dgap_poll_tasklet(unsigned long data)
-{
- struct board_t *bd = (struct board_t *) data;
- ulong lock_flags;
- char __iomem *vaddr;
- u16 head, tail;
-
- if (!bd || (bd->magic != DGAP_BOARD_MAGIC))
- return;
-
- if (bd->inhibit_poller)
- return;
-
- spin_lock_irqsave(&bd->bd_lock, lock_flags);
-
- vaddr = bd->re_map_membase;
-
- /*
- * If board is ready, parse deeper to see if there is anything to do.
- */
- if (bd->state == BOARD_READY) {
-
- struct ev_t __iomem *eaddr;
-
- if (!bd->re_map_membase) {
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
- return;
- }
- if (!bd->re_map_port) {
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
- return;
- }
-
- if (!bd->nasync)
- goto out;
-
- eaddr = (struct ev_t __iomem *) (vaddr + EVBUF);
-
- /* Get our head and tail */
- head = readw(&(eaddr->ev_head));
- tail = readw(&(eaddr->ev_tail));
-
- /*
- * If there is an event pending. Go service it.
- */
- if (head != tail) {
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
- dgap_event(bd);
- spin_lock_irqsave(&bd->bd_lock, lock_flags);
- }
-
-out:
- /*
- * If board is doing interrupts, ACK the interrupt.
- */
- if (bd && bd->intr_running)
- readb(bd->re_map_port + 2);
-
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
- return;
- }
-
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
-}
-
-/*=======================================================================
- *
- * dgap_cmdb - Sends a 2 byte command to the FEP.
- *
- * ch - Pointer to channel structure.
- * cmd - Command to be sent.
- * byte1 - Integer containing first byte to be sent.
- * byte2 - Integer containing second byte to be sent.
- * ncmds - Wait until ncmds or fewer cmds are left
- * in the cmd buffer before returning.
- *
- *=======================================================================*/
-static void dgap_cmdb(struct channel_t *ch, u8 cmd, u8 byte1,
- u8 byte2, uint ncmds)
-{
- char __iomem *vaddr;
- struct __iomem cm_t *cm_addr;
- uint count;
- uint n;
- u16 head;
- u16 tail;
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- /*
- * Check if board is still alive.
- */
- if (ch->ch_bd->state == BOARD_FAILED)
- return;
-
- /*
- * Make sure the pointers are in range before
- * writing to the FEP memory.
- */
- vaddr = ch->ch_bd->re_map_membase;
-
- if (!vaddr)
- return;
-
- cm_addr = (struct cm_t __iomem *) (vaddr + CMDBUF);
- head = readw(&(cm_addr->cm_head));
-
- /*
- * Forget it if pointers out of range.
- */
- if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
- ch->ch_bd->state = BOARD_FAILED;
- return;
- }
-
- /*
- * Put the data in the circular command buffer.
- */
- writeb(cmd, (vaddr + head + CMDSTART + 0));
- writeb((u8) ch->ch_portnum, (vaddr + head + CMDSTART + 1));
- writeb(byte1, (vaddr + head + CMDSTART + 2));
- writeb(byte2, (vaddr + head + CMDSTART + 3));
-
- head = (head + 4) & (CMDMAX - CMDSTART - 4);
-
- writew(head, &(cm_addr->cm_head));
-
- /*
- * Wait if necessary before updating the head
- * pointer to limit the number of outstanding
- * commands to the FEP. If the time spent waiting
- * is outlandish, declare the FEP dead.
- */
- for (count = dgap_count ;;) {
-
- head = readw(&(cm_addr->cm_head));
- tail = readw(&(cm_addr->cm_tail));
-
- n = (head - tail) & (CMDMAX - CMDSTART - 4);
-
- if (n <= ncmds * sizeof(struct cm_t))
- break;
-
- if (--count == 0) {
- ch->ch_bd->state = BOARD_FAILED;
- return;
- }
- udelay(10);
- }
-}
-
-/*=======================================================================
- *
- * dgap_cmdw - Sends a 1 word command to the FEP.
- *
- * ch - Pointer to channel structure.
- * cmd - Command to be sent.
- * word - Integer containing word to be sent.
- * ncmds - Wait until ncmds or fewer cmds are left
- * in the cmd buffer before returning.
- *
- *=======================================================================*/
-static void dgap_cmdw(struct channel_t *ch, u8 cmd, u16 word, uint ncmds)
-{
- char __iomem *vaddr;
- struct __iomem cm_t *cm_addr;
- uint count;
- uint n;
- u16 head;
- u16 tail;
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- /*
- * Check if board is still alive.
- */
- if (ch->ch_bd->state == BOARD_FAILED)
- return;
-
- /*
- * Make sure the pointers are in range before
- * writing to the FEP memory.
- */
- vaddr = ch->ch_bd->re_map_membase;
- if (!vaddr)
- return;
-
- cm_addr = (struct cm_t __iomem *) (vaddr + CMDBUF);
- head = readw(&(cm_addr->cm_head));
-
- /*
- * Forget it if pointers out of range.
- */
- if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
- ch->ch_bd->state = BOARD_FAILED;
- return;
- }
-
- /*
- * Put the data in the circular command buffer.
- */
- writeb(cmd, (vaddr + head + CMDSTART + 0));
- writeb((u8) ch->ch_portnum, (vaddr + head + CMDSTART + 1));
- writew((u16) word, (vaddr + head + CMDSTART + 2));
-
- head = (head + 4) & (CMDMAX - CMDSTART - 4);
-
- writew(head, &(cm_addr->cm_head));
-
- /*
- * Wait if necessary before updating the head
- * pointer to limit the number of outstanding
- * commands to the FEP. If the time spent waiting
- * is outlandish, declare the FEP dead.
- */
- for (count = dgap_count ;;) {
-
- head = readw(&(cm_addr->cm_head));
- tail = readw(&(cm_addr->cm_tail));
-
- n = (head - tail) & (CMDMAX - CMDSTART - 4);
-
- if (n <= ncmds * sizeof(struct cm_t))
- break;
-
- if (--count == 0) {
- ch->ch_bd->state = BOARD_FAILED;
- return;
- }
- udelay(10);
- }
-}
-
-/*=======================================================================
- *
- * dgap_cmdw_ext - Sends a extended word command to the FEP.
- *
- * ch - Pointer to channel structure.
- * cmd - Command to be sent.
- * word - Integer containing word to be sent.
- * ncmds - Wait until ncmds or fewer cmds are left
- * in the cmd buffer before returning.
- *
- *=======================================================================*/
-static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds)
-{
- char __iomem *vaddr;
- struct __iomem cm_t *cm_addr;
- uint count;
- uint n;
- u16 head;
- u16 tail;
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- /*
- * Check if board is still alive.
- */
- if (ch->ch_bd->state == BOARD_FAILED)
- return;
-
- /*
- * Make sure the pointers are in range before
- * writing to the FEP memory.
- */
- vaddr = ch->ch_bd->re_map_membase;
- if (!vaddr)
- return;
-
- cm_addr = (struct cm_t __iomem *) (vaddr + CMDBUF);
- head = readw(&(cm_addr->cm_head));
-
- /*
- * Forget it if pointers out of range.
- */
- if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
- ch->ch_bd->state = BOARD_FAILED;
- return;
- }
-
- /*
- * Put the data in the circular command buffer.
- */
-
- /* Write an FF to tell the FEP that we want an extended command */
- writeb((u8) 0xff, (vaddr + head + CMDSTART + 0));
-
- writeb((u8) ch->ch_portnum, (vaddr + head + CMDSTART + 1));
- writew((u16) cmd, (vaddr + head + CMDSTART + 2));
-
- /*
- * If the second part of the command won't fit,
- * put it at the beginning of the circular buffer.
- */
- if (((head + 4) >= ((CMDMAX - CMDSTART)) || (head & 03)))
- writew((u16) word, (vaddr + CMDSTART));
- else
- writew((u16) word, (vaddr + head + CMDSTART + 4));
-
- head = (head + 8) & (CMDMAX - CMDSTART - 4);
-
- writew(head, &(cm_addr->cm_head));
-
- /*
- * Wait if necessary before updating the head
- * pointer to limit the number of outstanding
- * commands to the FEP. If the time spent waiting
- * is outlandish, declare the FEP dead.
- */
- for (count = dgap_count ;;) {
-
- head = readw(&(cm_addr->cm_head));
- tail = readw(&(cm_addr->cm_tail));
-
- n = (head - tail) & (CMDMAX - CMDSTART - 4);
-
- if (n <= ncmds * sizeof(struct cm_t))
- break;
-
- if (--count == 0) {
- ch->ch_bd->state = BOARD_FAILED;
- return;
- }
- udelay(10);
- }
-}
+static const struct tty_operations dgap_tty_ops = {
+ .open = dgap_tty_open,
+ .close = dgap_tty_close,
+ .write = dgap_tty_write,
+ .write_room = dgap_tty_write_room,
+ .flush_buffer = dgap_tty_flush_buffer,
+ .chars_in_buffer = dgap_tty_chars_in_buffer,
+ .flush_chars = dgap_tty_flush_chars,
+ .ioctl = dgap_tty_ioctl,
+ .set_termios = dgap_tty_set_termios,
+ .stop = dgap_tty_stop,
+ .start = dgap_tty_start,
+ .throttle = dgap_tty_throttle,
+ .unthrottle = dgap_tty_unthrottle,
+ .hangup = dgap_tty_hangup,
+ .put_char = dgap_tty_put_char,
+ .tiocmget = dgap_tty_tiocmget,
+ .tiocmset = dgap_tty_tiocmset,
+ .break_ctl = dgap_tty_send_break,
+ .wait_until_sent = dgap_tty_wait_until_sent,
+ .send_xchar = dgap_tty_send_xchar
+};
-/*=======================================================================
- *
- * dgap_wmove - Write data to FEP buffer.
+/************************************************************************
*
- * ch - Pointer to channel structure.
- * buf - Poiter to characters to be moved.
- * cnt - Number of characters to move.
+ * TTY Initialization/Cleanup Functions
*
- *=======================================================================*/
-static void dgap_wmove(struct channel_t *ch, char *buf, uint cnt)
-{
- int n;
- char __iomem *taddr;
- struct bs_t __iomem *bs;
- u16 head;
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- /*
- * Check parameters.
- */
- bs = ch->ch_bs;
- head = readw(&(bs->tx_head));
-
- /*
- * If pointers are out of range, just return.
- */
- if ((cnt > ch->ch_tsize) ||
- (unsigned)(head - ch->ch_tstart) >= ch->ch_tsize)
- return;
-
- /*
- * If the write wraps over the top of the circular buffer,
- * move the portion up to the wrap point, and reset the
- * pointers to the bottom.
- */
- n = ch->ch_tstart + ch->ch_tsize - head;
-
- if (cnt >= n) {
- cnt -= n;
- taddr = ch->ch_taddr + head;
- memcpy_toio(taddr, buf, n);
- head = ch->ch_tstart;
- buf += n;
- }
-
- /*
- * Move rest of data.
- */
- taddr = ch->ch_taddr + head;
- n = cnt;
- memcpy_toio(taddr, buf, n);
- head += cnt;
-
- writew(head, &(bs->tx_head));
-}
-
-/*
- * Retrives the current custom baud rate from FEP memory,
- * and returns it back to the user.
- * Returns 0 on error.
- */
-static uint dgap_get_custom_baud(struct channel_t *ch)
-{
- u8 __iomem *vaddr;
- ulong offset;
- uint value;
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return 0;
-
- if (!ch->ch_bd || ch->ch_bd->magic != DGAP_BOARD_MAGIC)
- return 0;
-
- if (!(ch->ch_bd->bd_flags & BD_FEP5PLUS))
- return 0;
-
- vaddr = ch->ch_bd->re_map_membase;
-
- if (!vaddr)
- return 0;
-
- /*
- * Go get from fep mem, what the fep
- * believes the custom baud rate is.
- */
- offset = (ioread16(vaddr + ECS_SEG) << 4) + (ch->ch_portnum * 0x28)
- + LINE_SPEED;
-
- value = readw(vaddr + offset);
- return value;
-}
+ ************************************************************************/
/*
- * Calls the firmware to reset this channel.
- */
-static void dgap_firmware_reset_port(struct channel_t *ch)
-{
- dgap_cmdb(ch, CHRESET, 0, 0, 0);
-
- /*
- * Now that the channel is reset, we need to make sure
- * all the current settings get reapplied to the port
- * in the firmware.
- *
- * So we will set the driver's cache of firmware
- * settings all to 0, and then call param.
- */
- ch->ch_fepiflag = 0;
- ch->ch_fepcflag = 0;
- ch->ch_fepoflag = 0;
- ch->ch_fepstartc = 0;
- ch->ch_fepstopc = 0;
- ch->ch_fepastartc = 0;
- ch->ch_fepastopc = 0;
- ch->ch_mostat = 0;
- ch->ch_hflow = 0;
-}
-
-/*=======================================================================
- *
- * dgap_param - Set Digi parameters.
- *
- * struct tty_struct * - TTY for port.
+ * dgap_tty_register()
*
- *=======================================================================*/
-static int dgap_param(struct channel_t *ch, struct board_t *bd, u32 un_type)
+ * Init the tty subsystem for this board.
+ */
+static int dgap_tty_register(struct board_t *brd)
{
- u16 head;
- u16 cflag;
- u16 iflag;
- u8 mval;
- u8 hflow;
-
- /*
- * If baud rate is zero, flush queues, and set mval to drop DTR.
- */
- if ((ch->ch_c_cflag & (CBAUD)) == 0) {
-
- /* flush rx */
- head = readw(&(ch->ch_bs->rx_head));
- writew(head, &(ch->ch_bs->rx_tail));
-
- /* flush tx */
- head = readw(&(ch->ch_bs->tx_head));
- writew(head, &(ch->ch_bs->tx_tail));
-
- ch->ch_flags |= (CH_BAUD0);
-
- /* Drop RTS and DTR */
- ch->ch_mval &= ~(D_RTS(ch)|D_DTR(ch));
- mval = D_DTR(ch) | D_RTS(ch);
- ch->ch_baud_info = 0;
-
- } else if (ch->ch_custom_speed && (bd->bd_flags & BD_FEP5PLUS)) {
- /*
- * Tell the fep to do the command
- */
-
- dgap_cmdw_ext(ch, 0xff01, ch->ch_custom_speed, 0);
-
- /*
- * Now go get from fep mem, what the fep
- * believes the custom baud rate is.
- */
- ch->ch_custom_speed = dgap_get_custom_baud(ch);
- ch->ch_baud_info = ch->ch_custom_speed;
-
- /* Handle transition from B0 */
- if (ch->ch_flags & CH_BAUD0) {
- ch->ch_flags &= ~(CH_BAUD0);
- ch->ch_mval |= (D_RTS(ch)|D_DTR(ch));
- }
- mval = D_DTR(ch) | D_RTS(ch);
-
- } else {
- /*
- * Set baud rate, character size, and parity.
- */
-
-
- int iindex = 0;
- int jindex = 0;
- int baud = 0;
-
- ulong bauds[4][16] = {
- { /* slowbaud */
- 0, 50, 75, 110,
- 134, 150, 200, 300,
- 600, 1200, 1800, 2400,
- 4800, 9600, 19200, 38400 },
- { /* slowbaud & CBAUDEX */
- 0, 57600, 115200, 230400,
- 460800, 150, 200, 921600,
- 600, 1200, 1800, 2400,
- 4800, 9600, 19200, 38400 },
- { /* fastbaud */
- 0, 57600, 76800, 115200,
- 14400, 57600, 230400, 76800,
- 115200, 230400, 28800, 460800,
- 921600, 9600, 19200, 38400 },
- { /* fastbaud & CBAUDEX */
- 0, 57600, 115200, 230400,
- 460800, 150, 200, 921600,
- 600, 1200, 1800, 2400,
- 4800, 9600, 19200, 38400 }
- };
-
- /*
- * Only use the TXPrint baud rate if the
- * terminal unit is NOT open
- */
- if (!(ch->ch_tun.un_flags & UN_ISOPEN) &&
- un_type == DGAP_PRINT)
- baud = C_BAUD(ch->ch_pun.un_tty) & 0xff;
- else
- baud = C_BAUD(ch->ch_tun.un_tty) & 0xff;
-
- if (ch->ch_c_cflag & CBAUDEX)
- iindex = 1;
-
- if (ch->ch_digi.digi_flags & DIGI_FAST)
- iindex += 2;
-
- jindex = baud;
-
- if ((iindex >= 0) && (iindex < 4) &&
- (jindex >= 0) && (jindex < 16))
- baud = bauds[iindex][jindex];
- else
- baud = 0;
-
- if (baud == 0)
- baud = 9600;
-
- ch->ch_baud_info = baud;
-
- /*
- * CBAUD has bit position 0x1000 set these days to
- * indicate Linux baud rate remap.
- * We use a different bit assignment for high speed.
- * Clear this bit out while grabbing the parts of
- * "cflag" we want.
- */
- cflag = ch->ch_c_cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB |
- CSTOPB | CSIZE);
-
- /*
- * HUPCL bit is used by FEP to indicate fast baud
- * table is to be used.
- */
- if ((ch->ch_digi.digi_flags & DIGI_FAST) ||
- (ch->ch_c_cflag & CBAUDEX))
- cflag |= HUPCL;
-
- if ((ch->ch_c_cflag & CBAUDEX) &&
- !(ch->ch_digi.digi_flags & DIGI_FAST)) {
- /*
- * The below code is trying to guarantee that only
- * baud rates 115200, 230400, 460800, 921600 are
- * remapped. We use exclusive or because the various
- * baud rates share common bit positions and therefore
- * can't be tested for easily.
- */
- tcflag_t tcflag = (ch->ch_c_cflag & CBAUD) | CBAUDEX;
- int baudpart = 0;
-
- /*
- * Map high speed requests to index
- * into FEP's baud table
- */
- switch (tcflag) {
- case B57600:
- baudpart = 1;
- break;
-#ifdef B76800
- case B76800:
- baudpart = 2;
- break;
-#endif
- case B115200:
- baudpart = 3;
- break;
- case B230400:
- baudpart = 9;
- break;
- case B460800:
- baudpart = 11;
- break;
-#ifdef B921600
- case B921600:
- baudpart = 12;
- break;
-#endif
- default:
- baudpart = 0;
- }
-
- if (baudpart)
- cflag = (cflag & ~(CBAUD | CBAUDEX)) | baudpart;
- }
-
- cflag &= 0xffff;
-
- if (cflag != ch->ch_fepcflag) {
- ch->ch_fepcflag = (u16) (cflag & 0xffff);
-
- /*
- * Okay to have channel and board
- * locks held calling this
- */
- dgap_cmdw(ch, SCFLAG, (u16) cflag, 0);
- }
-
- /* Handle transition from B0 */
- if (ch->ch_flags & CH_BAUD0) {
- ch->ch_flags &= ~(CH_BAUD0);
- ch->ch_mval |= (D_RTS(ch)|D_DTR(ch));
- }
- mval = D_DTR(ch) | D_RTS(ch);
- }
-
- /*
- * Get input flags.
- */
- iflag = ch->ch_c_iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK |
- INPCK | ISTRIP | IXON | IXANY | IXOFF);
-
- if ((ch->ch_startc == _POSIX_VDISABLE) ||
- (ch->ch_stopc == _POSIX_VDISABLE)) {
- iflag &= ~(IXON | IXOFF);
- ch->ch_c_iflag &= ~(IXON | IXOFF);
- }
-
- /*
- * Only the IBM Xr card can switch between
- * 232 and 422 modes on the fly
- */
- if (bd->device == PCI_DEV_XR_IBM_DID) {
- if (ch->ch_digi.digi_flags & DIGI_422)
- dgap_cmdb(ch, SCOMMODE, MODE_422, 0, 0);
- else
- dgap_cmdb(ch, SCOMMODE, MODE_232, 0, 0);
- }
+ int rc;
- if (ch->ch_digi.digi_flags & DIGI_ALTPIN)
- iflag |= IALTPIN;
+ brd->serial_driver = tty_alloc_driver(MAXPORTS, 0);
+ if (IS_ERR(brd->serial_driver))
+ return PTR_ERR(brd->serial_driver);
- if (iflag != ch->ch_fepiflag) {
- ch->ch_fepiflag = iflag;
+ snprintf(brd->serial_name, MAXTTYNAMELEN, "tty_dgap_%d_",
+ brd->boardnum);
+ brd->serial_driver->name = brd->serial_name;
+ brd->serial_driver->name_base = 0;
+ brd->serial_driver->major = 0;
+ brd->serial_driver->minor_start = 0;
+ brd->serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ brd->serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ brd->serial_driver->init_termios = dgap_default_termios;
+ brd->serial_driver->driver_name = DRVSTR;
+ brd->serial_driver->flags = (TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV |
+ TTY_DRIVER_HARDWARE_BREAK);
- /* Okay to have channel and board locks held calling this */
- dgap_cmdw(ch, SIFLAG, (u16) ch->ch_fepiflag, 0);
+ /* The kernel wants space to store pointers to tty_structs */
+ brd->serial_driver->ttys =
+ kzalloc(MAXPORTS * sizeof(struct tty_struct *), GFP_KERNEL);
+ if (!brd->serial_driver->ttys) {
+ rc = -ENOMEM;
+ goto free_serial_drv;
}
/*
- * Select hardware handshaking.
+ * Entry points for driver. Called by the kernel from
+ * tty_io.c and n_tty.c.
*/
- hflow = 0;
-
- if (ch->ch_c_cflag & CRTSCTS)
- hflow |= (D_RTS(ch) | D_CTS(ch));
- if (ch->ch_digi.digi_flags & RTSPACE)
- hflow |= D_RTS(ch);
- if (ch->ch_digi.digi_flags & DTRPACE)
- hflow |= D_DTR(ch);
- if (ch->ch_digi.digi_flags & CTSPACE)
- hflow |= D_CTS(ch);
- if (ch->ch_digi.digi_flags & DSRPACE)
- hflow |= D_DSR(ch);
- if (ch->ch_digi.digi_flags & DCDPACE)
- hflow |= D_CD(ch);
-
- if (hflow != ch->ch_hflow) {
- ch->ch_hflow = hflow;
-
- /* Okay to have channel and board locks held calling this */
- dgap_cmdb(ch, SHFLOW, (u8) hflow, 0xff, 0);
- }
+ tty_set_operations(brd->serial_driver, &dgap_tty_ops);
/*
- * Set RTS and/or DTR Toggle if needed,
- * but only if product is FEP5+ based.
+ * If we're doing transparent print, we have to do all of the above
+ * again, separately so we don't get the LD confused about what major
+ * we are when we get into the dgap_tty_open() routine.
*/
- if (bd->bd_flags & BD_FEP5PLUS) {
- u16 hflow2 = 0;
-
- if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE)
- hflow2 |= (D_RTS(ch));
- if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE)
- hflow2 |= (D_DTR(ch));
-
- dgap_cmdw_ext(ch, 0xff03, hflow2, 0);
+ brd->print_driver = tty_alloc_driver(MAXPORTS, 0);
+ if (IS_ERR(brd->print_driver)) {
+ rc = PTR_ERR(brd->print_driver);
+ goto free_serial_drv;
}
- /*
- * Set modem control lines.
- */
-
- mval ^= ch->ch_mforce & (mval ^ ch->ch_mval);
-
- if (ch->ch_mostat ^ mval) {
- ch->ch_mostat = mval;
+ snprintf(brd->print_name, MAXTTYNAMELEN, "pr_dgap_%d_",
+ brd->boardnum);
+ brd->print_driver->name = brd->print_name;
+ brd->print_driver->name_base = 0;
+ brd->print_driver->major = 0;
+ brd->print_driver->minor_start = 0;
+ brd->print_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ brd->print_driver->subtype = SERIAL_TYPE_NORMAL;
+ brd->print_driver->init_termios = dgap_default_termios;
+ brd->print_driver->driver_name = DRVSTR;
+ brd->print_driver->flags = (TTY_DRIVER_REAL_RAW |
+ TTY_DRIVER_DYNAMIC_DEV |
+ TTY_DRIVER_HARDWARE_BREAK);
- /* Okay to have channel and board locks held calling this */
- dgap_cmdb(ch, SMODEM, (u8) mval, D_RTS(ch)|D_DTR(ch), 0);
+ /* The kernel wants space to store pointers to tty_structs */
+ brd->print_driver->ttys =
+ kzalloc(MAXPORTS * sizeof(struct tty_struct *), GFP_KERNEL);
+ if (!brd->print_driver->ttys) {
+ rc = -ENOMEM;
+ goto free_print_drv;
}
/*
- * Read modem signals, and then call carrier function.
+ * Entry points for driver. Called by the kernel from
+ * tty_io.c and n_tty.c.
*/
- ch->ch_mistat = readb(&(ch->ch_bs->m_stat));
- dgap_carrier(ch);
+ tty_set_operations(brd->print_driver, &dgap_tty_ops);
- /*
- * Set the start and stop characters.
- */
- if (ch->ch_startc != ch->ch_fepstartc ||
- ch->ch_stopc != ch->ch_fepstopc) {
- ch->ch_fepstartc = ch->ch_startc;
- ch->ch_fepstopc = ch->ch_stopc;
+ /* Register tty devices */
+ rc = tty_register_driver(brd->serial_driver);
+ if (rc < 0)
+ goto free_print_drv;
- /* Okay to have channel and board locks held calling this */
- dgap_cmdb(ch, SFLOWC, ch->ch_fepstartc, ch->ch_fepstopc, 0);
- }
+ /* Register Transparent Print devices */
+ rc = tty_register_driver(brd->print_driver);
+ if (rc < 0)
+ goto unregister_serial_drv;
- /*
- * Set the Auxiliary start and stop characters.
- */
- if (ch->ch_astartc != ch->ch_fepastartc ||
- ch->ch_astopc != ch->ch_fepastopc) {
- ch->ch_fepastartc = ch->ch_astartc;
- ch->ch_fepastopc = ch->ch_astopc;
+ dgap_boards_by_major[brd->serial_driver->major] = brd;
+ brd->dgap_serial_major = brd->serial_driver->major;
- /* Okay to have channel and board locks held calling this */
- dgap_cmdb(ch, SAFLOWC, ch->ch_fepastartc, ch->ch_fepastopc, 0);
- }
+ dgap_boards_by_major[brd->print_driver->major] = brd;
+ brd->dgap_transparent_print_major = brd->print_driver->major;
return 0;
-}
-
-/*
- * dgap_parity_scan()
- *
- * Convert the FEP5 way of reporting parity errors and breaks into
- * the Linux line discipline way.
- */
-static void dgap_parity_scan(struct channel_t *ch, unsigned char *cbuf,
- unsigned char *fbuf, int *len)
-{
- int l = *len;
- int count = 0;
- unsigned char *in, *cout, *fout;
- unsigned char c;
-
- in = cbuf;
- cout = cbuf;
- fout = fbuf;
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- return;
-
- while (l--) {
- c = *in++;
- switch (ch->pscan_state) {
- default:
- /* reset to sanity and fall through */
- ch->pscan_state = 0;
-
- case 0:
- /* No FF seen yet */
- if (c == (unsigned char) '\377')
- /* delete this character from stream */
- ch->pscan_state = 1;
- else {
- *cout++ = c;
- *fout++ = TTY_NORMAL;
- count += 1;
- }
- break;
-
- case 1:
- /* first FF seen */
- if (c == (unsigned char) '\377') {
- /* doubled ff, transform to single ff */
- *cout++ = c;
- *fout++ = TTY_NORMAL;
- count += 1;
- ch->pscan_state = 0;
- } else {
- /* save value examination in next state */
- ch->pscan_savechar = c;
- ch->pscan_state = 2;
- }
- break;
-
- case 2:
- /* third character of ff sequence */
- *cout++ = c;
-
- if (ch->pscan_savechar == 0x0) {
-
- if (c == 0x0) {
- ch->ch_err_break++;
- *fout++ = TTY_BREAK;
- } else {
- ch->ch_err_parity++;
- *fout++ = TTY_PARITY;
- }
- }
+unregister_serial_drv:
+ tty_unregister_driver(brd->serial_driver);
+free_print_drv:
+ put_tty_driver(brd->print_driver);
+free_serial_drv:
+ put_tty_driver(brd->serial_driver);
- count += 1;
- ch->pscan_state = 0;
- }
- }
- *len = count;
+ return rc;
}
-static void dgap_write_wakeup(struct board_t *bd, struct channel_t *ch,
- struct un_t *un, u32 mask,
- unsigned long *irq_flags1,
- unsigned long *irq_flags2)
+static void dgap_tty_unregister(struct board_t *brd)
{
- if (!(un->un_flags & mask))
- return;
-
- un->un_flags &= ~mask;
-
- if (!(un->un_flags & UN_ISOPEN))
- return;
-
- if ((un->un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- un->un_tty->ldisc->ops->write_wakeup) {
- spin_unlock_irqrestore(&ch->ch_lock, *irq_flags2);
- spin_unlock_irqrestore(&bd->bd_lock, *irq_flags1);
-
- (un->un_tty->ldisc->ops->write_wakeup)(un->un_tty);
-
- spin_lock_irqsave(&bd->bd_lock, *irq_flags1);
- spin_lock_irqsave(&ch->ch_lock, *irq_flags2);
- }
- wake_up_interruptible(&un->un_tty->write_wait);
- wake_up_interruptible(&un->un_flags_wait);
+ tty_unregister_driver(brd->print_driver);
+ tty_unregister_driver(brd->serial_driver);
+ put_tty_driver(brd->print_driver);
+ put_tty_driver(brd->serial_driver);
}
-/*=======================================================================
- *
- * dgap_event - FEP to host event processing routine.
- *
- * bd - Board of current event.
- *
- *=======================================================================*/
-static int dgap_event(struct board_t *bd)
+static int dgap_alloc_flipbuf(struct board_t *brd)
{
- struct channel_t *ch;
- ulong lock_flags;
- ulong lock_flags2;
- struct bs_t __iomem *bs;
- u8 __iomem *event;
- u8 __iomem *vaddr;
- struct ev_t __iomem *eaddr;
- uint head;
- uint tail;
- int port;
- int reason;
- int modem;
- int b1;
-
- if (!bd || bd->magic != DGAP_BOARD_MAGIC)
- return -EIO;
-
- spin_lock_irqsave(&bd->bd_lock, lock_flags);
-
- vaddr = bd->re_map_membase;
-
- if (!vaddr) {
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
- return -EIO;
- }
-
- eaddr = (struct ev_t __iomem *) (vaddr + EVBUF);
-
- /* Get our head and tail */
- head = readw(&(eaddr->ev_head));
- tail = readw(&(eaddr->ev_tail));
-
- /*
- * Forget it if pointers out of range.
- */
-
- if (head >= EVMAX - EVSTART || tail >= EVMAX - EVSTART ||
- (head | tail) & 03) {
- /* Let go of board lock */
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
- return -EIO;
- }
-
/*
- * Loop to process all the events in the buffer.
+ * allocate flip buffer for board.
*/
- while (tail != head) {
-
- /*
- * Get interrupt information.
- */
-
- event = bd->re_map_membase + tail + EVSTART;
-
- port = ioread8(event);
- reason = ioread8(event + 1);
- modem = ioread8(event + 2);
- b1 = ioread8(event + 3);
-
- /*
- * Make sure the interrupt is valid.
- */
- if (port >= bd->nasync)
- goto next;
-
- if (!(reason & (IFMODEM | IFBREAK | IFTLW | IFTEM | IFDATA)))
- goto next;
-
- ch = bd->channels[port];
-
- if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
- goto next;
-
- /*
- * If we have made it here, the event was valid.
- * Lock down the channel.
- */
- spin_lock_irqsave(&ch->ch_lock, lock_flags2);
-
- bs = ch->ch_bs;
-
- if (!bs) {
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
- goto next;
- }
-
- /*
- * Process received data.
- */
- if (reason & IFDATA) {
-
- /*
- * ALL LOCKS *MUST* BE DROPPED BEFORE CALLING INPUT!
- * input could send some data to ld, which in turn
- * could do a callback to one of our other functions.
- */
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
-
- dgap_input(ch);
-
- spin_lock_irqsave(&bd->bd_lock, lock_flags);
- spin_lock_irqsave(&ch->ch_lock, lock_flags2);
-
- if (ch->ch_flags & CH_RACTIVE)
- ch->ch_flags |= CH_RENABLE;
- else
- writeb(1, &(bs->idata));
-
- if (ch->ch_flags & CH_RWAIT) {
- ch->ch_flags &= ~CH_RWAIT;
-
- wake_up_interruptible
- (&ch->ch_tun.un_flags_wait);
- }
- }
-
- /*
- * Process Modem change signals.
- */
- if (reason & IFMODEM) {
- ch->ch_mistat = modem;
- dgap_carrier(ch);
- }
-
- /*
- * Process break.
- */
- if (reason & IFBREAK) {
-
- if (ch->ch_tun.un_tty) {
- /* A break has been indicated */
- ch->ch_err_break++;
- tty_buffer_request_room
- (ch->ch_tun.un_tty->port, 1);
- tty_insert_flip_char(ch->ch_tun.un_tty->port,
- 0, TTY_BREAK);
- tty_flip_buffer_push(ch->ch_tun.un_tty->port);
- }
- }
-
- /*
- * Process Transmit low.
- */
- if (reason & IFTLW) {
- dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_LOW,
- &lock_flags, &lock_flags2);
- dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_LOW,
- &lock_flags, &lock_flags2);
- if (ch->ch_flags & CH_WLOW) {
- ch->ch_flags &= ~CH_WLOW;
- wake_up_interruptible(&ch->ch_flags_wait);
- }
- }
-
- /*
- * Process Transmit empty.
- */
- if (reason & IFTEM) {
- dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_EMPTY,
- &lock_flags, &lock_flags2);
- dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_EMPTY,
- &lock_flags, &lock_flags2);
- if (ch->ch_flags & CH_WEMPTY) {
- ch->ch_flags &= ~CH_WEMPTY;
- wake_up_interruptible(&ch->ch_flags_wait);
- }
- }
-
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+ brd->flipbuf = kmalloc(MYFLIPLEN, GFP_KERNEL);
+ if (!brd->flipbuf)
+ return -ENOMEM;
-next:
- tail = (tail + 4) & (EVMAX - EVSTART - 4);
+ brd->flipflagbuf = kmalloc(MYFLIPLEN, GFP_KERNEL);
+ if (!brd->flipflagbuf) {
+ kfree(brd->flipbuf);
+ return -ENOMEM;
}
- writew(tail, &(eaddr->ev_tail));
- spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
-
return 0;
}
-static ssize_t dgap_driver_version_show(struct device_driver *ddp, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n", DG_PART);
-}
-static DRIVER_ATTR(version, S_IRUSR, dgap_driver_version_show, NULL);
-
-
-static ssize_t dgap_driver_boards_show(struct device_driver *ddp, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%d\n", dgap_numboards);
-}
-static DRIVER_ATTR(boards, S_IRUSR, dgap_driver_boards_show, NULL);
-
-
-static ssize_t dgap_driver_maxboards_show(struct device_driver *ddp, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%d\n", MAXBOARDS);
-}
-static DRIVER_ATTR(maxboards, S_IRUSR, dgap_driver_maxboards_show, NULL);
-
-
-static ssize_t dgap_driver_pollcounter_show(struct device_driver *ddp,
- char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%ld\n", dgap_poll_counter);
-}
-static DRIVER_ATTR(pollcounter, S_IRUSR, dgap_driver_pollcounter_show, NULL);
-
-static ssize_t dgap_driver_pollrate_show(struct device_driver *ddp, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%dms\n", dgap_poll_tick);
-}
-
-static ssize_t dgap_driver_pollrate_store(struct device_driver *ddp,
- const char *buf, size_t count)
-{
- if (sscanf(buf, "%d\n", &dgap_poll_tick) != 1)
- return -EINVAL;
- return count;
-}
-static DRIVER_ATTR(pollrate, (S_IRUSR | S_IWUSR), dgap_driver_pollrate_show,
- dgap_driver_pollrate_store);
-
-static int dgap_create_driver_sysfiles(struct pci_driver *dgap_driver)
-{
- int rc = 0;
- struct device_driver *driverfs = &dgap_driver->driver;
-
- rc |= driver_create_file(driverfs, &driver_attr_version);
- rc |= driver_create_file(driverfs, &driver_attr_boards);
- rc |= driver_create_file(driverfs, &driver_attr_maxboards);
- rc |= driver_create_file(driverfs, &driver_attr_pollrate);
- rc |= driver_create_file(driverfs, &driver_attr_pollcounter);
-
- return rc;
-}
-
-static void dgap_remove_driver_sysfiles(struct pci_driver *dgap_driver)
+static void dgap_free_flipbuf(struct board_t *brd)
{
- struct device_driver *driverfs = &dgap_driver->driver;
-
- driver_remove_file(driverfs, &driver_attr_version);
- driver_remove_file(driverfs, &driver_attr_boards);
- driver_remove_file(driverfs, &driver_attr_maxboards);
- driver_remove_file(driverfs, &driver_attr_pollrate);
- driver_remove_file(driverfs, &driver_attr_pollcounter);
+ kfree(brd->flipbuf);
+ kfree(brd->flipflagbuf);
}
static struct board_t *dgap_verify_board(struct device *p)
@@ -5843,39 +5600,6 @@ static ssize_t dgap_ports_txcount_show(struct device *p,
}
static DEVICE_ATTR(ports_txcount, S_IRUSR, dgap_ports_txcount_show, NULL);
-/* this function creates the sys files that will export each signal status
- * to sysfs each value will be put in a separate filename
- */
-static void dgap_create_ports_sysfiles(struct board_t *bd)
-{
- dev_set_drvdata(&bd->pdev->dev, bd);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_state);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_baud);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_msignals);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_iflag);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_cflag);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_oflag);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_lflag);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_digi_flag);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_rxcount);
- device_create_file(&(bd->pdev->dev), &dev_attr_ports_txcount);
-}
-
-/* removes all the sys files created for that port */
-static void dgap_remove_ports_sysfiles(struct board_t *bd)
-{
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_state);
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_baud);
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_msignals);
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_iflag);
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_cflag);
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_oflag);
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_lflag);
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_digi_flag);
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_rxcount);
- device_remove_file(&(bd->pdev->dev), &dev_attr_ports_txcount);
-}
-
static ssize_t dgap_tty_state_show(struct device *d,
struct device_attribute *attr,
char *buf)
@@ -6270,1086 +5994,1238 @@ static struct attribute *dgap_sysfs_tty_entries[] = {
NULL
};
-static struct attribute_group dgap_tty_attribute_group = {
- .name = NULL,
- .attrs = dgap_sysfs_tty_entries,
-};
-static void dgap_create_tty_sysfs(struct un_t *un, struct device *c)
+/* this function creates the sys files that will export each signal status
+ * to sysfs each value will be put in a separate filename
+ */
+static void dgap_create_ports_sysfiles(struct board_t *bd)
{
- int ret;
+ dev_set_drvdata(&bd->pdev->dev, bd);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_state);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_baud);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_msignals);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_iflag);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_cflag);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_oflag);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_lflag);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_digi_flag);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_rxcount);
+ device_create_file(&(bd->pdev->dev), &dev_attr_ports_txcount);
+}
- ret = sysfs_create_group(&c->kobj, &dgap_tty_attribute_group);
- if (ret)
+/* removes all the sys files created for that port */
+static void dgap_remove_ports_sysfiles(struct board_t *bd)
+{
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_state);
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_baud);
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_msignals);
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_iflag);
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_cflag);
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_oflag);
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_lflag);
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_digi_flag);
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_rxcount);
+ device_remove_file(&(bd->pdev->dev), &dev_attr_ports_txcount);
+}
+
+/*
+ * Copies the BIOS code from the user to the board,
+ * and starts the BIOS running.
+ */
+static void dgap_do_bios_load(struct board_t *brd, const u8 *ubios, int len)
+{
+ u8 __iomem *addr;
+ uint offset;
+ int i;
+
+ if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
return;
- dev_set_drvdata(c, un);
+ addr = brd->re_map_membase;
+
+ /*
+ * clear POST area
+ */
+ for (i = 0; i < 16; i++)
+ writeb(0, addr + POSTAREA + i);
+
+ /*
+ * Download bios
+ */
+ offset = 0x1000;
+ memcpy_toio(addr + offset, ubios, len);
+ writel(0x0bf00401, addr);
+ writel(0, (addr + 4));
+
+ /* Clear the reset, and change states. */
+ writeb(FEPCLR, brd->re_map_port);
}
-static void dgap_remove_tty_sysfs(struct device *c)
+/*
+ * Checks to see if the BIOS completed running on the card.
+ */
+static int dgap_test_bios(struct board_t *brd)
{
- sysfs_remove_group(&c->kobj, &dgap_tty_attribute_group);
+ u8 __iomem *addr;
+ u16 word;
+ u16 err1;
+ u16 err2;
+
+ if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
+ return -EINVAL;
+
+ addr = brd->re_map_membase;
+ word = readw(addr + POSTAREA);
+
+ /*
+ * It can take 5-6 seconds for a board to
+ * pass the bios self test and post results.
+ * Give it 10 seconds.
+ */
+ brd->wait_for_bios = 0;
+ while (brd->wait_for_bios < 1000) {
+ /* Check to see if BIOS thinks board is good. (GD). */
+ if (word == *(u16 *) "GD")
+ return 0;
+ msleep_interruptible(10);
+ brd->wait_for_bios++;
+ word = readw(addr + POSTAREA);
+ }
+
+ /* Gave up on board after too long of time taken */
+ err1 = readw(addr + SEQUENCE);
+ err2 = readw(addr + ERROR);
+ dev_warn(&brd->pdev->dev, "%s failed diagnostics. Error #(%x,%x).\n",
+ brd->name, err1, err2);
+ brd->state = BOARD_FAILED;
+ brd->dpastatus = BD_NOBIOS;
+
+ return -EIO;
}
-static void dgap_cleanup_nodes(void)
+/*
+ * Copies the FEP code from the user to the board,
+ * and starts the FEP running.
+ */
+static void dgap_do_fep_load(struct board_t *brd, const u8 *ufep, int len)
{
- struct cnode *p;
+ u8 __iomem *addr;
+ uint offset;
- p = &dgap_head;
+ if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
+ return;
- while (p) {
- struct cnode *tmp = p->next;
+ addr = brd->re_map_membase;
- if (p->type == NULLNODE) {
- p = tmp;
- continue;
- }
+ /*
+ * Download FEP
+ */
+ offset = 0x1000;
+ memcpy_toio(addr + offset, ufep, len);
- switch (p->type) {
- case BNODE:
- kfree(p->u.board.portstr);
- kfree(p->u.board.addrstr);
- kfree(p->u.board.pcibusstr);
- kfree(p->u.board.pcislotstr);
- kfree(p->u.board.method);
- break;
- case CNODE:
- kfree(p->u.conc.id);
- kfree(p->u.conc.connect);
- break;
- case MNODE:
- kfree(p->u.module.id);
- break;
- case TNODE:
- kfree(p->u.ttyname);
- break;
- case CUNODE:
- kfree(p->u.cuname);
- break;
- case LNODE:
- kfree(p->u.line.cable);
- break;
- case PNODE:
- kfree(p->u.printname);
- break;
- }
+ /*
+ * If board is a concentrator product, we need to give
+ * it its config string describing how the concentrators look.
+ */
+ if ((brd->type == PCX) || (brd->type == PEPC)) {
+ u8 string[100];
+ u8 __iomem *config;
+ u8 *xconfig;
+ int i = 0;
- kfree(p->u.board.status);
- kfree(p);
- p = tmp;
+ xconfig = dgap_create_config_string(brd, string);
+
+ /* Write string to board memory */
+ config = addr + CONFIG;
+ for (; i < CONFIGSIZE; i++, config++, xconfig++) {
+ writeb(*xconfig, config);
+ if ((*xconfig & 0xff) == 0xff)
+ break;
+ }
}
+
+ writel(0xbfc01004, (addr + 0xc34));
+ writel(0x3, (addr + 0xc30));
+
}
+
/*
- * Parse a configuration file read into memory as a string.
+ * Waits for the FEP to report thats its ready for us to use.
*/
-static int dgap_parsefile(char **in)
+static int dgap_test_fep(struct board_t *brd)
{
- struct cnode *p, *brd, *line, *conc;
- int rc;
- char *s;
- int linecnt = 0;
+ u8 __iomem *addr;
+ u16 word;
+ u16 err1;
+ u16 err2;
- p = &dgap_head;
- brd = line = conc = NULL;
+ if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
+ return -EINVAL;
- /* perhaps we are adding to an existing list? */
- while (p->next)
- p = p->next;
+ addr = brd->re_map_membase;
+ word = readw(addr + FEPSTAT);
- /* file must start with a BEGIN */
- while ((rc = dgap_gettok(in)) != BEGIN) {
- if (rc == 0) {
- pr_err("unexpected EOF");
- return -1;
+ /*
+ * It can take 2-3 seconds for the FEP to
+ * be up and running. Give it 5 secs.
+ */
+ brd->wait_for_fep = 0;
+ while (brd->wait_for_fep < 500) {
+ /* Check to see if FEP is up and running now. */
+ if (word == *(u16 *) "OS") {
+ /*
+ * Check to see if the board can support FEP5+ commands.
+ */
+ word = readw(addr + FEP5_PLUS);
+ if (word == *(u16 *) "5A")
+ brd->bd_flags |= BD_FEP5PLUS;
+
+ return 0;
}
+ msleep_interruptible(10);
+ brd->wait_for_fep++;
+ word = readw(addr + FEPSTAT);
}
- for (; ;) {
- int board_type = 0;
- int conc_type = 0;
- int module_type = 0;
+ /* Gave up on board after too long of time taken */
+ err1 = readw(addr + SEQUENCE);
+ err2 = readw(addr + ERROR);
+ dev_warn(&brd->pdev->dev,
+ "FEPOS for %s not functioning. Error #(%x,%x).\n",
+ brd->name, err1, err2);
+ brd->state = BOARD_FAILED;
+ brd->dpastatus = BD_NOFEP;
- rc = dgap_gettok(in);
- if (rc == 0) {
- pr_err("unexpected EOF");
- return -1;
- }
+ return -EIO;
+}
- switch (rc) {
- case BEGIN: /* should only be 1 begin */
- pr_err("unexpected config_begin\n");
- return -1;
+/*
+ * Physically forces the FEP5 card to reset itself.
+ */
+static void dgap_do_reset_board(struct board_t *brd)
+{
+ u8 check;
+ u32 check1;
+ u32 check2;
+ int i;
- case END:
- return 0;
+ if (!brd || (brd->magic != DGAP_BOARD_MAGIC) ||
+ !brd->re_map_membase || !brd->re_map_port)
+ return;
- case BOARD: /* board info */
- if (dgap_checknode(p))
- return -1;
+ /* FEPRST does not vary among supported boards */
+ writeb(FEPRST, brd->re_map_port);
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ for (i = 0; i <= 1000; i++) {
+ check = readb(brd->re_map_port) & 0xe;
+ if (check == FEPRST)
+ break;
+ udelay(10);
- p = p->next;
+ }
+ if (i > 1000) {
+ dev_warn(&brd->pdev->dev,
+ "dgap: Board not resetting... Failing board.\n");
+ brd->state = BOARD_FAILED;
+ brd->dpastatus = BD_NOFEP;
+ return;
+ }
- p->type = BNODE;
- p->u.board.status = kstrdup("No", GFP_KERNEL);
- line = conc = NULL;
- brd = p;
- linecnt = -1;
+ /*
+ * Make sure there really is memory out there.
+ */
+ writel(0xa55a3cc3, (brd->re_map_membase + LOWMEM));
+ writel(0x5aa5c33c, (brd->re_map_membase + HIGHMEM));
+ check1 = readl(brd->re_map_membase + LOWMEM);
+ check2 = readl(brd->re_map_membase + HIGHMEM);
- board_type = dgap_gettok(in);
- if (board_type == 0) {
- pr_err("board !!type not specified");
- return -1;
- }
+ if ((check1 != 0xa55a3cc3) || (check2 != 0x5aa5c33c)) {
+ dev_warn(&brd->pdev->dev,
+ "No memory at %p for board.\n",
+ brd->re_map_membase);
+ brd->state = BOARD_FAILED;
+ brd->dpastatus = BD_NOFEP;
+ return;
+ }
+}
- p->u.board.type = board_type;
+#ifdef DIGI_CONCENTRATORS_SUPPORTED
+/*
+ * Sends a concentrator image into the FEP5 board.
+ */
+static void dgap_do_conc_load(struct board_t *brd, u8 *uaddr, int len)
+{
+ char __iomem *vaddr;
+ u16 offset;
+ struct downld_t *to_dp;
- break;
+ if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
+ return;
- case IO: /* i/o port */
- if (p->type != BNODE) {
- pr_err("IO port only vaild for boards");
- return -1;
- }
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- p->u.board.portstr = kstrdup(s, GFP_KERNEL);
- if (kstrtol(s, 0, &p->u.board.port)) {
- pr_err("bad number for IO port");
- return -1;
- }
- p->u.board.v_port = 1;
- break;
+ vaddr = brd->re_map_membase;
- case MEM: /* memory address */
- if (p->type != BNODE) {
- pr_err("memory address only vaild for boards");
- return -1;
- }
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- p->u.board.addrstr = kstrdup(s, GFP_KERNEL);
- if (kstrtoul(s, 0, &p->u.board.addr)) {
- pr_err("bad number for memory address");
- return -1;
- }
- p->u.board.v_addr = 1;
- break;
+ offset = readw((u16 *) (vaddr + DOWNREQ));
+ to_dp = (struct downld_t *) (vaddr + (int) offset);
+ memcpy_toio(to_dp, uaddr, len);
- case PCIINFO: /* pci information */
- if (p->type != BNODE) {
- pr_err("memory address only vaild for boards");
- return -1;
- }
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- p->u.board.pcibusstr = kstrdup(s, GFP_KERNEL);
- if (kstrtoul(s, 0, &p->u.board.pcibus)) {
- pr_err("bad number for pci bus");
- return -1;
- }
- p->u.board.v_pcibus = 1;
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- p->u.board.pcislotstr = kstrdup(s, GFP_KERNEL);
- if (kstrtoul(s, 0, &p->u.board.pcislot)) {
- pr_err("bad number for pci slot");
- return -1;
- }
- p->u.board.v_pcislot = 1;
- break;
+ /* Tell card we have data for it */
+ writew(0, vaddr + (DOWNREQ));
- case METHOD:
- if (p->type != BNODE) {
- pr_err("install method only vaild for boards");
- return -1;
- }
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- p->u.board.method = kstrdup(s, GFP_KERNEL);
- p->u.board.v_method = 1;
- break;
+ brd->conc_dl_status = NO_PENDING_CONCENTRATOR_REQUESTS;
+}
+#endif
- case STATUS:
- if (p->type != BNODE) {
- pr_err("config status only vaild for boards");
- return -1;
- }
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- p->u.board.status = kstrdup(s, GFP_KERNEL);
- break;
+#define EXPANSION_ROM_SIZE (64 * 1024)
+#define FEP5_ROM_MAGIC (0xFEFFFFFF)
- case NPORTS: /* number of ports */
- if (p->type == BNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.board.nport)) {
- pr_err("bad number for number of ports");
- return -1;
- }
- p->u.board.v_nport = 1;
- } else if (p->type == CNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.conc.nport)) {
- pr_err("bad number for number of ports");
- return -1;
- }
- p->u.conc.v_nport = 1;
- } else if (p->type == MNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.module.nport)) {
- pr_err("bad number for number of ports");
- return -1;
- }
- p->u.module.v_nport = 1;
- } else {
- pr_err("nports only valid for concentrators or modules");
- return -1;
- }
- break;
+static void dgap_get_vpd(struct board_t *brd)
+{
+ u32 magic;
+ u32 base_offset;
+ u16 rom_offset;
+ u16 vpd_offset;
+ u16 image_length;
+ u16 i;
+ u8 byte1;
+ u8 byte2;
- case ID: /* letter ID used in tty name */
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
+ /*
+ * Poke the magic number at the PCI Rom Address location.
+ * If VPD is supported, the value read from that address
+ * will be non-zero.
+ */
+ magic = FEP5_ROM_MAGIC;
+ pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
+ pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic);
- p->u.board.status = kstrdup(s, GFP_KERNEL);
+ /* VPD not supported, bail */
+ if (!magic)
+ return;
- if (p->type == CNODE) {
- p->u.conc.id = kstrdup(s, GFP_KERNEL);
- p->u.conc.v_id = 1;
- } else if (p->type == MNODE) {
- p->u.module.id = kstrdup(s, GFP_KERNEL);
- p->u.module.v_id = 1;
- } else {
- pr_err("id only valid for concentrators or modules");
- return -1;
- }
- break;
+ /*
+ * To get to the OTPROM memory, we have to send the boards base
+ * address or'ed with 1 into the PCI Rom Address location.
+ */
+ magic = brd->membase | 0x01;
+ pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
+ pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic);
- case STARTO: /* start offset of ID */
- if (p->type == BNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.board.start)) {
- pr_err("bad number for start of tty count");
- return -1;
- }
- p->u.board.v_start = 1;
- } else if (p->type == CNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.conc.start)) {
- pr_err("bad number for start of tty count");
- return -1;
- }
- p->u.conc.v_start = 1;
- } else if (p->type == MNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.module.start)) {
- pr_err("bad number for start of tty count");
- return -1;
- }
- p->u.module.v_start = 1;
- } else {
- pr_err("start only valid for concentrators or modules");
- return -1;
- }
- break;
+ byte1 = readb(brd->re_map_membase);
+ byte2 = readb(brd->re_map_membase + 1);
- case TTYN: /* tty name prefix */
- if (dgap_checknode(p))
- return -1;
+ /*
+ * If the board correctly swapped to the OTPROM memory,
+ * the first 2 bytes (header) should be 0x55, 0xAA
+ */
+ if (byte1 == 0x55 && byte2 == 0xAA) {
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ base_offset = 0;
- p = p->next;
- p->type = TNODE;
+ /*
+ * We have to run through all the OTPROM memory looking
+ * for the VPD offset.
+ */
+ while (base_offset <= EXPANSION_ROM_SIZE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpeced end of file");
- return -1;
- }
- p->u.ttyname = kstrdup(s, GFP_KERNEL);
- if (!p->u.ttyname)
- return -1;
+ /*
+ * Lots of magic numbers here.
+ *
+ * The VPD offset is located inside the ROM Data
+ * Structure.
+ *
+ * We also have to remember the length of each
+ * ROM Data Structure, so we can "hop" to the next
+ * entry if the VPD isn't in the current
+ * ROM Data Structure.
+ */
+ rom_offset = readw(brd->re_map_membase +
+ base_offset + 0x18);
+ image_length = readw(brd->re_map_membase +
+ rom_offset + 0x10) * 512;
+ vpd_offset = readw(brd->re_map_membase +
+ rom_offset + 0x08);
- break;
+ /* Found the VPD entry */
+ if (vpd_offset)
+ break;
- case CU: /* cu name prefix */
- if (dgap_checknode(p))
- return -1;
+ /* We didn't find a VPD entry, go to next ROM entry. */
+ base_offset += image_length;
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ byte1 = readb(brd->re_map_membase + base_offset);
+ byte2 = readb(brd->re_map_membase + base_offset + 1);
- p = p->next;
- p->type = CUNODE;
+ /*
+ * If the new ROM offset doesn't have 0x55, 0xAA
+ * as its header, we have run out of ROM.
+ */
+ if (byte1 != 0x55 || byte2 != 0xAA)
+ break;
+ }
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpeced end of file");
- return -1;
+ /*
+ * If we have a VPD offset, then mark the board
+ * as having a valid VPD, and copy VPDSIZE (512) bytes of
+ * that VPD to the buffer we have in our board structure.
+ */
+ if (vpd_offset) {
+ brd->bd_flags |= BD_HAS_VPD;
+ for (i = 0; i < VPDSIZE; i++) {
+ brd->vpd[i] = readb(brd->re_map_membase +
+ vpd_offset + i);
}
- p->u.cuname = kstrdup(s, GFP_KERNEL);
- if (!p->u.cuname)
- return -1;
+ }
+ }
- break;
+ /*
+ * We MUST poke the magic number at the PCI Rom Address location again.
+ * This makes the card report the regular board memory back to us,
+ * rather than the OTPROM memory.
+ */
+ magic = FEP5_ROM_MAGIC;
+ pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
+}
- case LINE: /* line information */
- if (dgap_checknode(p))
- return -1;
- if (!brd) {
- pr_err("must specify board before line info");
- return -1;
- }
- switch (brd->u.board.type) {
- case PPCM:
- pr_err("line not vaild for PC/em");
- return -1;
- }
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+static ssize_t dgap_driver_version_show(struct device_driver *ddp, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", DG_PART);
+}
+static DRIVER_ATTR(version, S_IRUSR, dgap_driver_version_show, NULL);
- p = p->next;
- p->type = LNODE;
- conc = NULL;
- line = p;
- linecnt++;
- break;
- case CONC: /* concentrator information */
- if (dgap_checknode(p))
- return -1;
- if (!line) {
- pr_err("must specify line info before concentrator");
- return -1;
- }
+static ssize_t dgap_driver_boards_show(struct device_driver *ddp, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", dgap_numboards);
+}
+static DRIVER_ATTR(boards, S_IRUSR, dgap_driver_boards_show, NULL);
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
- p = p->next;
- p->type = CNODE;
- conc = p;
+static ssize_t dgap_driver_maxboards_show(struct device_driver *ddp, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", MAXBOARDS);
+}
+static DRIVER_ATTR(maxboards, S_IRUSR, dgap_driver_maxboards_show, NULL);
- if (linecnt)
- brd->u.board.conc2++;
- else
- brd->u.board.conc1++;
- conc_type = dgap_gettok(in);
- if (conc_type == 0 || conc_type != CX ||
- conc_type != EPC) {
- pr_err("failed to set a type of concentratros");
- return -1;
- }
+static ssize_t dgap_driver_pollcounter_show(struct device_driver *ddp,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%ld\n", dgap_poll_counter);
+}
+static DRIVER_ATTR(pollcounter, S_IRUSR, dgap_driver_pollcounter_show, NULL);
- p->u.conc.type = conc_type;
+static ssize_t dgap_driver_pollrate_show(struct device_driver *ddp, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%dms\n", dgap_poll_tick);
+}
- break;
+static ssize_t dgap_driver_pollrate_store(struct device_driver *ddp,
+ const char *buf, size_t count)
+{
+ if (sscanf(buf, "%d\n", &dgap_poll_tick) != 1)
+ return -EINVAL;
+ return count;
+}
+static DRIVER_ATTR(pollrate, (S_IRUSR | S_IWUSR), dgap_driver_pollrate_show,
+ dgap_driver_pollrate_store);
- case MOD: /* EBI module */
- if (dgap_checknode(p))
- return -1;
- if (!brd) {
- pr_err("must specify board info before EBI modules");
- return -1;
- }
- switch (brd->u.board.type) {
- case PPCM:
- linecnt = 0;
- break;
- default:
- if (!conc) {
- pr_err("must specify concentrator info before EBI module");
- return -1;
- }
- }
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+static int dgap_create_driver_sysfiles(struct pci_driver *dgap_driver)
+{
+ int rc = 0;
+ struct device_driver *driverfs = &dgap_driver->driver;
- p = p->next;
- p->type = MNODE;
+ rc |= driver_create_file(driverfs, &driver_attr_version);
+ rc |= driver_create_file(driverfs, &driver_attr_boards);
+ rc |= driver_create_file(driverfs, &driver_attr_maxboards);
+ rc |= driver_create_file(driverfs, &driver_attr_pollrate);
+ rc |= driver_create_file(driverfs, &driver_attr_pollcounter);
- if (linecnt)
- brd->u.board.module2++;
- else
- brd->u.board.module1++;
+ return rc;
+}
- module_type = dgap_gettok(in);
- if (module_type == 0 || module_type != PORTS ||
- module_type != MODEM) {
- pr_err("failed to set a type of module");
- return -1;
- }
+static void dgap_remove_driver_sysfiles(struct pci_driver *dgap_driver)
+{
+ struct device_driver *driverfs = &dgap_driver->driver;
- p->u.module.type = module_type;
+ driver_remove_file(driverfs, &driver_attr_version);
+ driver_remove_file(driverfs, &driver_attr_boards);
+ driver_remove_file(driverfs, &driver_attr_maxboards);
+ driver_remove_file(driverfs, &driver_attr_pollrate);
+ driver_remove_file(driverfs, &driver_attr_pollcounter);
+}
- break;
+static struct attribute_group dgap_tty_attribute_group = {
+ .name = NULL,
+ .attrs = dgap_sysfs_tty_entries,
+};
- case CABLE:
- if (p->type == LNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- p->u.line.cable = kstrdup(s, GFP_KERNEL);
- p->u.line.v_cable = 1;
- }
- break;
+static void dgap_create_tty_sysfs(struct un_t *un, struct device *c)
+{
+ int ret;
- case SPEED: /* sync line speed indication */
- if (p->type == LNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.line.speed)) {
- pr_err("bad number for line speed");
- return -1;
- }
- p->u.line.v_speed = 1;
- } else if (p->type == CNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.conc.speed)) {
- pr_err("bad number for line speed");
- return -1;
- }
- p->u.conc.v_speed = 1;
- } else {
- pr_err("speed valid only for lines or concentrators.");
- return -1;
- }
- break;
+ ret = sysfs_create_group(&c->kobj, &dgap_tty_attribute_group);
+ if (ret)
+ return;
- case CONNECT:
- if (p->type == CNODE) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- p->u.conc.connect = kstrdup(s, GFP_KERNEL);
- p->u.conc.v_connect = 1;
- }
- break;
- case PRINT: /* transparent print name prefix */
- if (dgap_checknode(p))
- return -1;
+ dev_set_drvdata(c, un);
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+}
- p = p->next;
- p->type = PNODE;
+static void dgap_remove_tty_sysfs(struct device *c)
+{
+ sysfs_remove_group(&c->kobj, &dgap_tty_attribute_group);
+}
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpeced end of file");
- return -1;
- }
- p->u.printname = kstrdup(s, GFP_KERNEL);
- if (!p->u.printname)
- return -1;
+/*
+ * Create pr and tty device entries
+ */
+static int dgap_tty_register_ports(struct board_t *brd)
+{
+ struct channel_t *ch;
+ int i;
+ int ret;
- break;
+ brd->serial_ports = kcalloc(brd->nasync, sizeof(*brd->serial_ports),
+ GFP_KERNEL);
+ if (!brd->serial_ports)
+ return -ENOMEM;
- case CMAJOR: /* major number */
- if (dgap_checknode(p))
- return -1;
+ brd->printer_ports = kcalloc(brd->nasync, sizeof(*brd->printer_ports),
+ GFP_KERNEL);
+ if (!brd->printer_ports) {
+ ret = -ENOMEM;
+ goto free_serial_ports;
+ }
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ for (i = 0; i < brd->nasync; i++) {
+ tty_port_init(&brd->serial_ports[i]);
+ tty_port_init(&brd->printer_ports[i]);
+ }
- p = p->next;
- p->type = JNODE;
+ ch = brd->channels[0];
+ for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.majornumber)) {
- pr_err("bad number for major number");
- return -1;
- }
- break;
+ struct device *classp;
- case ALTPIN: /* altpin setting */
- if (dgap_checknode(p))
- return -1;
+ classp = tty_port_register_device(&brd->serial_ports[i],
+ brd->serial_driver,
+ i, NULL);
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ if (IS_ERR(classp)) {
+ ret = PTR_ERR(classp);
+ goto unregister_ttys;
+ }
- p = p->next;
- p->type = ANODE;
+ dgap_create_tty_sysfs(&ch->ch_tun, classp);
+ ch->ch_tun.un_sysfs = classp;
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.altpin)) {
- pr_err("bad number for altpin");
- return -1;
- }
- break;
+ classp = tty_port_register_device(&brd->printer_ports[i],
+ brd->print_driver,
+ i, NULL);
- case USEINTR: /* enable interrupt setting */
- if (dgap_checknode(p))
- return -1;
+ if (IS_ERR(classp)) {
+ ret = PTR_ERR(classp);
+ goto unregister_ttys;
+ }
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ dgap_create_tty_sysfs(&ch->ch_pun, classp);
+ ch->ch_pun.un_sysfs = classp;
+ }
+ dgap_create_ports_sysfiles(brd);
- p = p->next;
- p->type = INTRNODE;
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.useintr)) {
- pr_err("bad number for useintr");
- return -1;
- }
- break;
+ return 0;
- case TTSIZ: /* size of tty structure */
- if (dgap_checknode(p))
- return -1;
+unregister_ttys:
+ while (i >= 0) {
+ ch = brd->channels[i];
+ if (ch->ch_tun.un_sysfs) {
+ dgap_remove_tty_sysfs(ch->ch_tun.un_sysfs);
+ tty_unregister_device(brd->serial_driver, i);
+ }
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ if (ch->ch_pun.un_sysfs) {
+ dgap_remove_tty_sysfs(ch->ch_pun.un_sysfs);
+ tty_unregister_device(brd->print_driver, i);
+ }
+ i--;
+ }
- p = p->next;
- p->type = TSNODE;
+ for (i = 0; i < brd->nasync; i++) {
+ tty_port_destroy(&brd->serial_ports[i]);
+ tty_port_destroy(&brd->printer_ports[i]);
+ }
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.ttysize)) {
- pr_err("bad number for ttysize");
- return -1;
- }
- break;
+ kfree(brd->printer_ports);
+ brd->printer_ports = NULL;
- case CHSIZ: /* channel structure size */
- if (dgap_checknode(p))
- return -1;
+free_serial_ports:
+ kfree(brd->serial_ports);
+ brd->serial_ports = NULL;
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ return ret;
+}
- p = p->next;
- p->type = CSNODE;
+/*
+ * dgap_cleanup_tty()
+ *
+ * Uninitialize the TTY portion of this driver. Free all memory and
+ * resources.
+ */
+static void dgap_cleanup_tty(struct board_t *brd)
+{
+ struct device *dev;
+ int i;
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.chsize)) {
- pr_err("bad number for chsize");
- return -1;
- }
- break;
+ dgap_boards_by_major[brd->serial_driver->major] = NULL;
+ brd->dgap_serial_major = 0;
+ for (i = 0; i < brd->nasync; i++) {
+ tty_port_destroy(&brd->serial_ports[i]);
+ dev = brd->channels[i]->ch_tun.un_sysfs;
+ dgap_remove_tty_sysfs(dev);
+ tty_unregister_device(brd->serial_driver, i);
+ }
+ tty_unregister_driver(brd->serial_driver);
+ put_tty_driver(brd->serial_driver);
+ kfree(brd->serial_ports);
- case BSSIZ: /* board structure size */
- if (dgap_checknode(p))
- return -1;
+ dgap_boards_by_major[brd->print_driver->major] = NULL;
+ brd->dgap_transparent_print_major = 0;
+ for (i = 0; i < brd->nasync; i++) {
+ tty_port_destroy(&brd->printer_ports[i]);
+ dev = brd->channels[i]->ch_pun.un_sysfs;
+ dgap_remove_tty_sysfs(dev);
+ tty_unregister_device(brd->print_driver, i);
+ }
+ tty_unregister_driver(brd->print_driver);
+ put_tty_driver(brd->print_driver);
+ kfree(brd->printer_ports);
+}
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+static int dgap_request_irq(struct board_t *brd)
+{
+ int rc;
- p = p->next;
- p->type = BSNODE;
+ if (!brd || brd->magic != DGAP_BOARD_MAGIC)
+ return -ENODEV;
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.bssize)) {
- pr_err("bad number for bssize");
- return -1;
- }
- break;
+ /*
+ * Set up our interrupt handler if we are set to do interrupts.
+ */
+ if (dgap_config_get_useintr(brd) && brd->irq) {
- case UNTSIZ: /* sched structure size */
- if (dgap_checknode(p))
- return -1;
+ rc = request_irq(brd->irq, dgap_intr, IRQF_SHARED, "DGAP", brd);
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ if (!rc)
+ brd->intr_used = 1;
+ }
+ return 0;
+}
- p = p->next;
- p->type = USNODE;
+static void dgap_free_irq(struct board_t *brd)
+{
+ if (brd->intr_used && brd->irq)
+ free_irq(brd->irq, brd);
+}
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.unsize)) {
- pr_err("bad number for schedsize");
- return -1;
- }
- break;
+static int dgap_firmware_load(struct pci_dev *pdev, int card_type,
+ struct board_t *brd)
+{
+ const struct firmware *fw;
+ char *tmp_ptr;
+ int ret;
+ char *dgap_config_buf;
- case F2SIZ: /* f2200 structure size */
- if (dgap_checknode(p))
- return -1;
+ dgap_get_vpd(brd);
+ dgap_do_reset_board(brd);
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ if (fw_info[card_type].conf_name) {
+ ret = request_firmware(&fw, fw_info[card_type].conf_name,
+ &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "config file %s not found\n",
+ fw_info[card_type].conf_name);
+ return ret;
+ }
- p = p->next;
- p->type = FSNODE;
+ dgap_config_buf = kzalloc(fw->size + 1, GFP_KERNEL);
+ if (!dgap_config_buf) {
+ release_firmware(fw);
+ return -ENOMEM;
+ }
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.f2size)) {
- pr_err("bad number for f2200size");
- return -1;
- }
- break;
+ memcpy(dgap_config_buf, fw->data, fw->size);
+ release_firmware(fw);
- case VPSIZ: /* vpix structure size */
- if (dgap_checknode(p))
- return -1;
+ /*
+ * preserve dgap_config_buf
+ * as dgap_parsefile would
+ * otherwise alter it.
+ */
+ tmp_ptr = dgap_config_buf;
- p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL);
- if (!p->next)
- return -1;
+ if (dgap_parsefile(&tmp_ptr) != 0) {
+ kfree(dgap_config_buf);
+ return -EINVAL;
+ }
+ kfree(dgap_config_buf);
+ }
- p = p->next;
- p->type = VSNODE;
+ /*
+ * Match this board to a config the user created for us.
+ */
+ brd->bd_config =
+ dgap_find_config(brd->type, brd->pci_bus, brd->pci_slot);
- s = dgap_getword(in);
- if (!s) {
- pr_err("unexpected end of file");
- return -1;
- }
- if (kstrtol(s, 0, &p->u.vpixsize)) {
- pr_err("bad number for vpixsize");
- return -1;
- }
- break;
- }
+ /*
+ * Because the 4 port Xr products share the same PCI ID
+ * as the 8 port Xr products, if we receive a NULL config
+ * back, and this is a PAPORT8 board, retry with a
+ * PAPORT4 attempt as well.
+ */
+ if (brd->type == PAPORT8 && !brd->bd_config)
+ brd->bd_config =
+ dgap_find_config(PAPORT4, brd->pci_bus, brd->pci_slot);
+
+ if (!brd->bd_config) {
+ dev_err(&pdev->dev, "No valid configuration found\n");
+ return -EINVAL;
}
-}
-/*
- * dgap_sindex: much like index(), but it looks for a match of any character in
- * the group, and returns that position. If the first character is a ^, then
- * this will match the first occurrence not in that group.
- */
-static char *dgap_sindex(char *string, char *group)
-{
- char *ptr;
+ if (fw_info[card_type].bios_name) {
+ ret = request_firmware(&fw, fw_info[card_type].bios_name,
+ &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "bios file %s not found\n",
+ fw_info[card_type].bios_name);
+ return ret;
+ }
+ dgap_do_bios_load(brd, fw->data, fw->size);
+ release_firmware(fw);
- if (!string || !group)
- return (char *) NULL;
+ /* Wait for BIOS to test board... */
+ ret = dgap_test_bios(brd);
+ if (ret)
+ return ret;
+ }
- if (*group == '^') {
- group++;
- for (; *string; string++) {
- for (ptr = group; *ptr; ptr++) {
- if (*ptr == *string)
- break;
- }
- if (*ptr == '\0')
- return string;
+ if (fw_info[card_type].fep_name) {
+ ret = request_firmware(&fw, fw_info[card_type].fep_name,
+ &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "dgap: fep file %s not found\n",
+ fw_info[card_type].fep_name);
+ return ret;
}
- } else {
- for (; *string; string++) {
- for (ptr = group; *ptr; ptr++) {
- if (*ptr == *string)
- return string;
- }
+ dgap_do_fep_load(brd, fw->data, fw->size);
+ release_firmware(fw);
+
+ /* Wait for FEP to load on board... */
+ ret = dgap_test_fep(brd);
+ if (ret)
+ return ret;
+ }
+
+#ifdef DIGI_CONCENTRATORS_SUPPORTED
+ /*
+ * If this is a CX or EPCX, we need to see if the firmware
+ * is requesting a concentrator image from us.
+ */
+ if ((bd->type == PCX) || (bd->type == PEPC)) {
+ chk_addr = (u16 *) (vaddr + DOWNREQ);
+ /* Nonzero if FEP is requesting concentrator image. */
+ check = readw(chk_addr);
+ vaddr = brd->re_map_membase;
+ }
+
+ if (fw_info[card_type].con_name && check && vaddr) {
+ ret = request_firmware(&fw, fw_info[card_type].con_name,
+ &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "conc file %s not found\n",
+ fw_info[card_type].con_name);
+ return ret;
}
+ /* Put concentrator firmware loading code here */
+ offset = readw((u16 *) (vaddr + DOWNREQ));
+ memcpy_toio(offset, fw->data, fw->size);
+
+ dgap_do_conc_load(brd, (char *)fw->data, fw->size)
+ release_firmware(fw);
}
+#endif
- return (char *) NULL;
+ return 0;
}
/*
- * Get a token from the input file; return 0 if end of file is reached
+ * dgap_tty_init()
+ *
+ * Init the tty subsystem. Called once per board after board has been
+ * downloaded and init'ed.
*/
-static int dgap_gettok(char **in)
+static int dgap_tty_init(struct board_t *brd)
{
- char *w;
- struct toklist *t;
+ int i;
+ int tlw;
+ uint true_count;
+ u8 __iomem *vaddr;
+ u8 modem;
+ struct channel_t *ch;
+ struct bs_t __iomem *bs;
+ struct cm_t __iomem *cm;
+ int ret;
- if (strstr(dgap_cword, "board")) {
- w = dgap_getword(in);
- snprintf(dgap_cword, MAXCWORD, "%s", w);
- for (t = dgap_brdtype; t->token != 0; t++) {
- if (!strcmp(w, t->string))
- return t->token;
+ /*
+ * Initialize board structure elements.
+ */
+
+ vaddr = brd->re_map_membase;
+ true_count = readw((vaddr + NCHAN));
+
+ brd->nasync = dgap_config_get_num_prts(brd);
+
+ if (!brd->nasync)
+ brd->nasync = brd->maxports;
+
+ if (brd->nasync > brd->maxports)
+ brd->nasync = brd->maxports;
+
+ if (true_count != brd->nasync) {
+ dev_warn(&brd->pdev->dev,
+ "%s configured for %d ports, has %d ports.\n",
+ brd->name, brd->nasync, true_count);
+
+ if ((brd->type == PPCM) &&
+ (true_count == 64 || true_count == 0)) {
+ dev_warn(&brd->pdev->dev,
+ "Please make SURE the EBI cable running from the card\n");
+ dev_warn(&brd->pdev->dev,
+ "to each EM module is plugged into EBI IN!\n");
}
- } else {
- while ((w = dgap_getword(in))) {
- snprintf(dgap_cword, MAXCWORD, "%s", w);
- for (t = dgap_tlist; t->token != 0; t++) {
- if (!strcmp(w, t->string))
- return t->token;
- }
+
+ brd->nasync = true_count;
+
+ /* If no ports, don't bother going any further */
+ if (!brd->nasync) {
+ brd->state = BOARD_FAILED;
+ brd->dpastatus = BD_NOFEP;
+ return -EIO;
+ }
+ }
+
+ /*
+ * Allocate channel memory that might not have been allocated
+ * when the driver was first loaded.
+ */
+ for (i = 0; i < brd->nasync; i++) {
+ brd->channels[i] =
+ kzalloc(sizeof(struct channel_t), GFP_KERNEL);
+ if (!brd->channels[i]) {
+ ret = -ENOMEM;
+ goto free_chan;
}
}
+ ch = brd->channels[0];
+ vaddr = brd->re_map_membase;
+
+ bs = (struct bs_t __iomem *) ((ulong) vaddr + CHANBUF);
+ cm = (struct cm_t __iomem *) ((ulong) vaddr + CMDBUF);
+
+ brd->bd_bs = bs;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++, ch = brd->channels[i], bs++) {
+
+ spin_lock_init(&ch->ch_lock);
+
+ /* Store all our magic numbers */
+ ch->magic = DGAP_CHANNEL_MAGIC;
+ ch->ch_tun.magic = DGAP_UNIT_MAGIC;
+ ch->ch_tun.un_type = DGAP_SERIAL;
+ ch->ch_tun.un_ch = ch;
+ ch->ch_tun.un_dev = i;
+
+ ch->ch_pun.magic = DGAP_UNIT_MAGIC;
+ ch->ch_pun.un_type = DGAP_PRINT;
+ ch->ch_pun.un_ch = ch;
+ ch->ch_pun.un_dev = i;
+
+ ch->ch_vaddr = vaddr;
+ ch->ch_bs = bs;
+ ch->ch_cm = cm;
+ ch->ch_bd = brd;
+ ch->ch_portnum = i;
+ ch->ch_digi = dgap_digi_init;
+
+ /*
+ * Set up digi dsr and dcd bits based on altpin flag.
+ */
+ if (dgap_config_get_altpin(brd)) {
+ ch->ch_dsr = DM_CD;
+ ch->ch_cd = DM_DSR;
+ ch->ch_digi.digi_flags |= DIGI_ALTPIN;
+ } else {
+ ch->ch_cd = DM_CD;
+ ch->ch_dsr = DM_DSR;
+ }
+
+ ch->ch_taddr = vaddr + (ioread16(&(ch->ch_bs->tx_seg)) << 4);
+ ch->ch_raddr = vaddr + (ioread16(&(ch->ch_bs->rx_seg)) << 4);
+ ch->ch_tx_win = 0;
+ ch->ch_rx_win = 0;
+ ch->ch_tsize = readw(&(ch->ch_bs->tx_max)) + 1;
+ ch->ch_rsize = readw(&(ch->ch_bs->rx_max)) + 1;
+ ch->ch_tstart = 0;
+ ch->ch_rstart = 0;
+
+ /*
+ * Set queue water marks, interrupt mask,
+ * and general tty parameters.
+ */
+ tlw = ch->ch_tsize >= 2000 ? ((ch->ch_tsize * 5) / 8) :
+ ch->ch_tsize / 2;
+ ch->ch_tlw = tlw;
+
+ dgap_cmdw(ch, STLOW, tlw, 0);
+
+ dgap_cmdw(ch, SRLOW, ch->ch_rsize / 2, 0);
+
+ dgap_cmdw(ch, SRHIGH, 7 * ch->ch_rsize / 8, 0);
+
+ ch->ch_mistat = readb(&(ch->ch_bs->m_stat));
+
+ init_waitqueue_head(&ch->ch_flags_wait);
+ init_waitqueue_head(&ch->ch_tun.un_flags_wait);
+ init_waitqueue_head(&ch->ch_pun.un_flags_wait);
+
+ /* Turn on all modem interrupts for now */
+ modem = (DM_CD | DM_DSR | DM_CTS | DM_RI);
+ writeb(modem, &(ch->ch_bs->m_int));
+
+ /*
+ * Set edelay to 0 if interrupts are turned on,
+ * otherwise set edelay to the usual 100.
+ */
+ if (brd->intr_used)
+ writew(0, &(ch->ch_bs->edelay));
+ else
+ writew(100, &(ch->ch_bs->edelay));
+
+ writeb(1, &(ch->ch_bs->idata));
+ }
+
return 0;
+
+free_chan:
+ while (--i >= 0) {
+ kfree(brd->channels[i]);
+ brd->channels[i] = NULL;
+ }
+ return ret;
}
/*
- * get a word from the input stream, also keep track of current line number.
- * words are separated by whitespace.
+ * dgap_tty_free()
+ *
+ * Free the channles which are allocated in dgap_tty_init().
*/
-static char *dgap_getword(char **in)
+static void dgap_tty_free(struct board_t *brd)
{
- char *ret_ptr = *in;
+ int i;
- char *ptr = dgap_sindex(*in, " \t\n");
+ for (i = 0; i < brd->nasync; i++)
+ kfree(brd->channels[i]);
+}
- /* If no word found, return null */
- if (!ptr)
- return NULL;
+static int dgap_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int rc;
+ struct board_t *brd;
- /* Mark new location for our buffer */
- *ptr = '\0';
- *in = ptr + 1;
+ if (dgap_numboards >= MAXBOARDS)
+ return -EPERM;
- /* Eat any extra spaces/tabs/newlines that might be present */
- while (*in && **in && ((**in == ' ') ||
- (**in == '\t') ||
- (**in == '\n'))) {
- **in = '\0';
- *in = *in + 1;
- }
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return -EIO;
- return ret_ptr;
+ brd = dgap_found_board(pdev, ent->driver_data, dgap_numboards);
+ if (IS_ERR(brd))
+ return PTR_ERR(brd);
+
+ rc = dgap_firmware_load(pdev, ent->driver_data, brd);
+ if (rc)
+ goto cleanup_brd;
+
+ rc = dgap_alloc_flipbuf(brd);
+ if (rc)
+ goto cleanup_brd;
+
+ rc = dgap_tty_register(brd);
+ if (rc)
+ goto free_flipbuf;
+
+ rc = dgap_request_irq(brd);
+ if (rc)
+ goto unregister_tty;
+
+ /*
+ * Do tty device initialization.
+ */
+ rc = dgap_tty_init(brd);
+ if (rc < 0)
+ goto free_irq;
+
+ rc = dgap_tty_register_ports(brd);
+ if (rc)
+ goto tty_free;
+
+ brd->state = BOARD_READY;
+ brd->dpastatus = BD_RUNNING;
+
+ dgap_board[dgap_numboards++] = brd;
+
+ return 0;
+
+tty_free:
+ dgap_tty_free(brd);
+free_irq:
+ dgap_free_irq(brd);
+unregister_tty:
+ dgap_tty_unregister(brd);
+free_flipbuf:
+ dgap_free_flipbuf(brd);
+cleanup_brd:
+ dgap_cleanup_nodes();
+ dgap_unmap(brd);
+ kfree(brd);
+
+ return rc;
+}
+
+static void dgap_remove_one(struct pci_dev *dev)
+{
+ /* Do Nothing */
}
+static struct pci_driver dgap_driver = {
+ .name = "dgap",
+ .probe = dgap_init_one,
+ .id_table = dgap_pci_tbl,
+ .remove = dgap_remove_one,
+};
+
/*
- * dgap_checknode: see if all the necessary info has been supplied for a node
- * before creating the next node.
+ * dgap_init_globals()
+ *
+ * This is where we initialize the globals from the static insmod
+ * configuration variables. These are declared near the head of
+ * this file.
*/
-static int dgap_checknode(struct cnode *p)
+static void dgap_init_globals(void)
{
- switch (p->type) {
- case LNODE:
- if (p->u.line.v_speed == 0) {
- pr_err("line speed not specified");
- return 1;
- }
- return 0;
+ int i;
- case CNODE:
- if (p->u.conc.v_speed == 0) {
- pr_err("concentrator line speed not specified");
- return 1;
- }
- if (p->u.conc.v_nport == 0) {
- pr_err("number of ports on concentrator not specified");
- return 1;
- }
- if (p->u.conc.v_id == 0) {
- pr_err("concentrator id letter not specified");
- return 1;
- }
- return 0;
+ for (i = 0; i < MAXBOARDS; i++)
+ dgap_board[i] = NULL;
- case MNODE:
- if (p->u.module.v_nport == 0) {
- pr_err("number of ports on EBI module not specified");
- return 1;
- }
- if (p->u.module.v_id == 0) {
- pr_err("EBI module id letter not specified");
- return 1;
- }
- return 0;
- }
- return 0;
+ init_timer(&dgap_poll_timer);
}
/*
- * Given a board pointer, returns whether we should use interrupts or not.
+ * Start of driver.
*/
-static uint dgap_config_get_useintr(struct board_t *bd)
+static int dgap_start(void)
{
- struct cnode *p;
+ int rc;
+ unsigned long flags;
+ struct device *device;
- if (!bd)
- return 0;
+ /*
+ * make sure that the globals are
+ * init'd before we do anything else
+ */
+ dgap_init_globals();
- for (p = bd->bd_config; p; p = p->next) {
- if (p->type == INTRNODE) {
- /*
- * check for pcxr types.
- */
- return p->u.useintr;
- }
+ dgap_numboards = 0;
+
+ pr_info("For the tools package please visit http://www.digi.com\n");
+
+ /*
+ * Register our base character device into the kernel.
+ */
+
+ /*
+ * Register management/dpa devices
+ */
+ rc = register_chrdev(DIGI_DGAP_MAJOR, "dgap", &dgap_board_fops);
+ if (rc < 0)
+ return rc;
+
+ dgap_class = class_create(THIS_MODULE, "dgap_mgmt");
+ if (IS_ERR(dgap_class)) {
+ rc = PTR_ERR(dgap_class);
+ goto failed_class;
}
- /* If not found, then don't turn on interrupts. */
- return 0;
+ device = device_create(dgap_class, NULL,
+ MKDEV(DIGI_DGAP_MAJOR, 0),
+ NULL, "dgap_mgmt");
+ if (IS_ERR(device)) {
+ rc = PTR_ERR(device);
+ goto failed_device;
+ }
+
+ /* Start the poller */
+ spin_lock_irqsave(&dgap_poll_lock, flags);
+ init_timer(&dgap_poll_timer);
+ dgap_poll_timer.function = dgap_poll_handler;
+ dgap_poll_timer.data = 0;
+ dgap_poll_time = jiffies + dgap_jiffies_from_ms(dgap_poll_tick);
+ dgap_poll_timer.expires = dgap_poll_time;
+ spin_unlock_irqrestore(&dgap_poll_lock, flags);
+
+ add_timer(&dgap_poll_timer);
+
+ return rc;
+
+failed_device:
+ class_destroy(dgap_class);
+failed_class:
+ unregister_chrdev(DIGI_DGAP_MAJOR, "dgap");
+ return rc;
}
-/*
- * Given a board pointer, returns whether we turn on altpin or not.
- */
-static uint dgap_config_get_altpin(struct board_t *bd)
+static void dgap_stop(void)
{
- struct cnode *p;
+ unsigned long lock_flags;
- if (!bd)
- return 0;
+ spin_lock_irqsave(&dgap_poll_lock, lock_flags);
+ dgap_poll_stop = 1;
+ spin_unlock_irqrestore(&dgap_poll_lock, lock_flags);
- for (p = bd->bd_config; p; p = p->next) {
- if (p->type == ANODE) {
- /*
- * check for pcxr types.
- */
- return p->u.altpin;
- }
- }
+ del_timer_sync(&dgap_poll_timer);
- /* If not found, then don't turn on interrupts. */
- return 0;
+ device_destroy(dgap_class, MKDEV(DIGI_DGAP_MAJOR, 0));
+ class_destroy(dgap_class);
+ unregister_chrdev(DIGI_DGAP_MAJOR, "dgap");
}
/*
- * Given a specific type of board, if found, detached link and
- * returns the first occurrence in the list.
+ * dgap_cleanup_board()
+ *
+ * Free all the memory associated with a board
*/
-static struct cnode *dgap_find_config(int type, int bus, int slot)
+static void dgap_cleanup_board(struct board_t *brd)
{
- struct cnode *p, *prev, *prev2, *found;
-
- p = &dgap_head;
+ int i;
- while (p->next) {
- prev = p;
- p = p->next;
+ if (!brd || brd->magic != DGAP_BOARD_MAGIC)
+ return;
- if (p->type != BNODE)
- continue;
+ dgap_free_irq(brd);
- if (p->u.board.type != type)
- continue;
+ tasklet_kill(&brd->helper_tasklet);
- if (p->u.board.v_pcibus &&
- p->u.board.pcibus != bus)
- continue;
+ dgap_unmap(brd);
- if (p->u.board.v_pcislot &&
- p->u.board.pcislot != slot)
- continue;
+ /* Free all allocated channels structs */
+ for (i = 0; i < MAXPORTS ; i++)
+ kfree(brd->channels[i]);
- found = p;
- /*
- * Keep walking thru the list till we
- * find the next board.
- */
- while (p->next) {
- prev2 = p;
- p = p->next;
+ kfree(brd->flipbuf);
+ kfree(brd->flipflagbuf);
- if (p->type != BNODE)
- continue;
+ dgap_board[brd->boardnum] = NULL;
- /*
- * Mark the end of our 1 board
- * chain of configs.
- */
- prev2->next = NULL;
+ kfree(brd);
+}
- /*
- * Link the "next" board to the
- * previous board, effectively
- * "unlinking" our board from
- * the main config.
- */
- prev->next = p;
- return found;
- }
- /*
- * It must be the last board in the list.
- */
- prev->next = NULL;
- return found;
- }
- return NULL;
-}
+/************************************************************************
+ *
+ * Driver load/unload functions
+ *
+ ************************************************************************/
/*
- * Given a board pointer, walks the config link, counting up
- * all ports user specified should be on the board.
- * (This does NOT mean they are all actually present right now tho)
+ * init_module()
+ *
+ * Module load. This is where it all starts.
*/
-static uint dgap_config_get_num_prts(struct board_t *bd)
+static int dgap_init_module(void)
{
- int count = 0;
- struct cnode *p;
+ int rc;
- if (!bd)
- return 0;
+ pr_info("%s, Digi International Part Number %s\n", DG_NAME, DG_PART);
- for (p = bd->bd_config; p; p = p->next) {
+ rc = dgap_start();
+ if (rc)
+ return rc;
- switch (p->type) {
- case BNODE:
- /*
- * check for pcxr types.
- */
- if (p->u.board.type > EPCFE)
- count += p->u.board.nport;
- break;
- case CNODE:
- count += p->u.conc.nport;
- break;
- case MNODE:
- count += p->u.module.nport;
- break;
- }
- }
- return count;
+ rc = pci_register_driver(&dgap_driver);
+ if (rc)
+ goto err_stop;
+
+ rc = dgap_create_driver_sysfiles(&dgap_driver);
+ if (rc)
+ goto err_unregister;
+
+ dgap_driver_state = DRIVER_READY;
+
+ return 0;
+
+err_unregister:
+ pci_unregister_driver(&dgap_driver);
+err_stop:
+ dgap_stop();
+
+ return rc;
}
-static char *dgap_create_config_string(struct board_t *bd, char *string)
+/*
+ * dgap_cleanup_module()
+ *
+ * Module unload. This is where it all ends.
+ */
+static void dgap_cleanup_module(void)
{
- char *ptr = string;
- struct cnode *p;
- struct cnode *q;
- int speed;
+ int i;
+ ulong lock_flags;
- if (!bd) {
- *ptr = 0xff;
- return string;
- }
+ spin_lock_irqsave(&dgap_poll_lock, lock_flags);
+ dgap_poll_stop = 1;
+ spin_unlock_irqrestore(&dgap_poll_lock, lock_flags);
- for (p = bd->bd_config; p; p = p->next) {
+ /* Turn off poller right away. */
+ del_timer_sync(&dgap_poll_timer);
- switch (p->type) {
- case LNODE:
- *ptr = '\0';
- ptr++;
- *ptr = p->u.line.speed;
- ptr++;
- break;
- case CNODE:
- /*
- * Because the EPC/con concentrators can have EM modules
- * hanging off of them, we have to walk ahead in the
- * list and keep adding the number of ports on each EM
- * to the config. UGH!
- */
- speed = p->u.conc.speed;
- q = p->next;
- if (q && (q->type == MNODE)) {
- *ptr = (p->u.conc.nport + 0x80);
- ptr++;
- p = q;
- while (q->next && (q->next->type) == MNODE) {
- *ptr = (q->u.module.nport + 0x80);
- ptr++;
- p = q;
- q = q->next;
- }
- *ptr = q->u.module.nport;
- ptr++;
- } else {
- *ptr = p->u.conc.nport;
- ptr++;
- }
+ dgap_remove_driver_sysfiles(&dgap_driver);
- *ptr = speed;
- ptr++;
- break;
- }
+ device_destroy(dgap_class, MKDEV(DIGI_DGAP_MAJOR, 0));
+ class_destroy(dgap_class);
+ unregister_chrdev(DIGI_DGAP_MAJOR, "dgap");
+
+ for (i = 0; i < dgap_numboards; ++i) {
+ dgap_remove_ports_sysfiles(dgap_board[i]);
+ dgap_cleanup_tty(dgap_board[i]);
+ dgap_cleanup_board(dgap_board[i]);
}
- *ptr = 0xff;
- return string;
+ dgap_cleanup_nodes();
+
+ if (dgap_numboards)
+ pci_unregister_driver(&dgap_driver);
}
+
+module_init(dgap_init_module);
+module_exit(dgap_cleanup_module);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Digi International, http://www.digi.com");
+MODULE_DESCRIPTION("Driver for the Digi International EPCA PCI based product line");
+MODULE_SUPPORTED_DEVICE("dgap");
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists