linux-kernel - Re: [PATCH 3/3] i2c/at91: adopt pinctrl support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 20 Oct 2014 14:43:36 +0200
From:	Ludovic Desroches <ludovic.desroches@...el.com>
To:	Wenyou Yang <wenyou.yang@...el.com>
CC:	<wsa@...-dreams.de>, <ludovic.desroches@...el.com>,
	<linux-i2c@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<nicolas.ferre@...el.com>, <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 3/3] i2c/at91: adopt pinctrl support

On Mon, Oct 20, 2014 at 11:42:14AM +0800, Wenyou Yang wrote:
> Amend the i2c at91 pin controller to optionally take a pin control
> handle and set the state of the pins to:
> 
> - "default" on boot, resume and before performing an transfer
> - "sleep" on suspend()
> 
> This should make it possible to optimize energy usage for the pins
> both for the suspend/resume cycle
> 
> Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>

Acked by: Ludovic Desroches <ludovic.desroches@...el.com>

> ---
>  drivers/i2c/busses/i2c-at91.c |   12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
> index 8f408f8..ed2c382 100644
> --- a/drivers/i2c/busses/i2c-at91.c
> +++ b/drivers/i2c/busses/i2c-at91.c
> @@ -32,6 +32,7 @@
>  #include <linux/slab.h>
>  #include <linux/platform_data/dma-atmel.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/pinctrl/consumer.h>
>  
>  #define DEFAULT_TWI_CLK_HZ		100000		/* max 400 Kbits/s */
>  #define AT91_I2C_TIMEOUT	msecs_to_jiffies(100)	/* transfer timeout */
> @@ -748,6 +749,8 @@ static int at91_twi_probe(struct platform_device *pdev)
>  	u32 phy_addr;
>  	u32 bus_clk_rate;
>  
> +	pinctrl_pm_select_default_state(&pdev->dev);
> +
>  	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
>  	if (!dev)
>  		return -ENOMEM;
> @@ -850,8 +853,10 @@ static int at91_twi_suspend(struct device *dev)
>  {
>  	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
>  
> -	if (!pm_runtime_suspended(dev))
> +	if (!pm_runtime_suspended(dev)) {
>  		clk_disable_unprepare(twi_dev->clk);
> +		pinctrl_pm_select_sleep_state(dev);
> +	}
>  
>  	return 0;
>  }
> @@ -862,6 +867,7 @@ static int at91_twi_resume(struct device *dev)
>  	int ret;
>  
>  	if (!pm_runtime_suspended(dev)) {
> +		pinctrl_pm_select_default_state(dev);
>  		ret = clk_prepare_enable(twi_dev->clk);
>  		if (ret)
>  			return ret;
> @@ -881,6 +887,8 @@ static int at91_twi_runtime_suspend(struct device *dev)
>  
>  	clk_disable_unprepare(twi_dev->clk);
>  
> +	pinctrl_pm_select_sleep_state(dev);
> +
>  	return 0;
>  }
>  
> @@ -888,6 +896,8 @@ static int at91_twi_runtime_resume(struct device *dev)
>  {
>  	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
>  
> +	pinctrl_pm_select_default_state(dev);
> +
>  	return clk_prepare_enable(twi_dev->clk);
>  }
>  #endif
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/