| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <54469798.90001@mleia.com>
Date: Tue, 21 Oct 2014 20:27:52 +0300
From: Vladimir Zapolskiy <vz@...ia.com>
To: Corentin LABBE <clabbe.montjoie@...il.com>
CC: robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
maxime.ripard@...e-electrons.com, linux@....linux.org.uk,
herbert@...dor.apana.org.au, davem@...emloft.net,
grant.likely@...aro.org, akpm@...ux-foundation.org,
gregkh@...uxfoundation.org, joe@...ches.com,
mchehab@....samsung.com, crope@....fi, devicetree@...r.kernel.org,
linux-sunxi@...glegroups.com, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-crypto@...r.kernel.org
Subject: Re: [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator
Hi Corentin,
On 21.10.2014 19:25, Corentin LABBE wrote:
> On 10/21/14 01:28, Vladimir Zapolskiy wrote:
>> Hello LABBE,
>>
>> On 19.10.2014 17:16, LABBE Corentin wrote:
>>> Add support for the Security System included in Allwinner SoC A20.
>>> The Security System is a hardware cryptographic accelerator that support AES/MD5/SHA1/DES/3DES/PRNG algorithms.
>>>
> []
>>> +
>>> + /* If we have only one SG, we can use kmap_atomic */
>>> + if (sg_next(in_sg) == NULL && sg_next(out_sg) == NULL)
>>> + return sunxi_ss_aes_poll_atomic(areq);
>>
>> for clarity it might be better to move all "mutex_unlock(&ss->lock)"
>> calls from sunxi_ss_aes_poll_atomic() body right to here.
>>
>
> Ok
> I have moved all mutex_unlock/writel(0, SS_CTL) at the end of function, it is cleaner now.
please check that sunxi_ss_aes_poll_atomic() has no more mutex_unlock()
calls inside it.
With best wishes,
Vladimir
>>> +
>>> +};
>>> +
>>> +static int sunxi_ss_probe(struct platform_device *pdev)
>>> +{
>>> + struct resource *res;
>>> + u32 v;
>>> + int err;
>>> + unsigned long cr;
>>> + const unsigned long cr_ahb = 24 * 1000 * 1000;
>>> + const unsigned long cr_mod = 150 * 1000 * 1000;
>>> +
>>> + if (!pdev->dev.of_node)
>>> + return -ENODEV;
>>> +
>>> + ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL);
>>> + if (ss == NULL)
>>> + return -ENOMEM;
>>
>> Why do you dynamically allocate memory for "struct sunxi_ss_ctx *ss"?
>> Since you have a single global pointer, it makes sense to declare
>> "struct sunxi_ss_ctx ss" statically instead.
>>
>> And even a better solution is to remove a single global pointer.
>
> All other crypto driver I have read use a global structure and it made things easy.
> Thanks to M. Ripard that pointed to me the talitos driver that solve the global device pointer by using alg template and container_of().
>
> But since I think there will never 2 Security System at the same time on the same SoC, I do not know if it is worth the cost to add more complexity just to remove a pointer.
>
>>
>>> +
>>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> + ss->base = devm_ioremap_resource(&pdev->dev, res);
>>> + if (IS_ERR(ss->base)) {
>>> + dev_err(&pdev->dev, "Cannot request MMIO\n");
>>> + return PTR_ERR(ss->base);
>>> + }
>>> +
>>> + ss->ssclk = devm_clk_get(&pdev->dev, "mod");
>>> + if (IS_ERR(ss->ssclk)) {
>>> + err = PTR_ERR(ss->ssclk);
>>> + dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err);
>>> + return err;
>>> + }
>>> + dev_dbg(&pdev->dev, "clock ss acquired\n");
>>> +
>>> + ss->busclk = devm_clk_get(&pdev->dev, "ahb");
>>> + if (IS_ERR(ss->busclk)) {
>>> + err = PTR_ERR(ss->busclk);
>>> + dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err);
>>> + return err;
>>> + }
>>> + dev_dbg(&pdev->dev, "clock ahb_ss acquired\n");
>>> +
>>> + /* Enable both clocks */
>>> + err = clk_prepare_enable(ss->busclk);
>>> + if (err != 0) {
>>> + dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
>>> + return err;
>>> + }
>>> + err = clk_prepare_enable(ss->ssclk);
>>> + if (err != 0) {
>>> + dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n");
>>> + clk_disable_unprepare(ss->busclk);
>>
>> goto somewhere to the end of the function?
>
> OK
>
>>
>>> + return err;
>>> + }
>>> +
>>> + /*
>>> + * Check that clock have the correct rates gived in the datasheet
>>> + * Try to set the clock to the maximum allowed
>>> + */
>>> + err = clk_set_rate(ss->ssclk, cr_mod);
>>> + if (err != 0) {
>>> + dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n");
>>> + clk_disable_unprepare(ss->ssclk);
>>> + clk_disable_unprepare(ss->busclk);
>>
>> goto "error_md5"?
>
> Ok
>
>>
>>> + return err;
>>> + }
>>> +
>>> + cr = clk_get_rate(ss->busclk);
>>> + if (cr >= cr_ahb)
>>> + dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
>>> + cr, cr / 1000000, cr_ahb);
>>> + else
>>> + dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
>>> + cr, cr / 1000000, cr_ahb);
>>
>> See next comment.
>>
>>> + cr = clk_get_rate(ss->ssclk);
>>> + if (cr <= cr_mod)
>>> + if (cr < cr_mod)
>>> + dev_info(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
>>> + cr, cr / 1000000, cr_mod);
>>> + else
>>> + dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
>>> + cr, cr / 1000000, cr_mod);
>>> + else
>>> + dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n",
>>> + cr, cr / 1000000, cr_mod);
>>
>> The management of kernel log levels looks pretty strange. As far as I
>> understand there is no error on any clock rate, I'd recommend to keep
>> only one information message.
>>
>
> If clock rate are below the recommended value, the only impact I found was bad performance.
> So it explain the warn and no error. (yes the info must be warn, ...fixed)
>
> But I will put comment for explain that.
>
>>> + /*
>>> + * Datasheet named it "Die Bonding ID"
>>> + * I expect to be a sort of Security System Revision number.
>>> + * Since the A80 seems to have an other version of SS
>>> + * this info could be useful
>>> + */
>>> + writel(SS_ENABLED, ss->base + SS_CTL);
>>> + v = readl(ss->base + SS_CTL);
>>> + v >>= 16;
>>> + v &= 0x07;
>>> + dev_info(&pdev->dev, "Die ID %d\n", v);
>>> + writel(0, ss->base + SS_CTL);
>>> +
>>> + ss->dev = &pdev->dev;
>>> +
>>> + mutex_init(&ss->lock);
>>> + mutex_init(&ss->bufin_lock);
>>> + mutex_init(&ss->bufout_lock);
>>> +
>>> + err = crypto_register_ahash(&sunxi_md5_alg);
>>> + if (err)
>>> + goto error_md5;
>>> + err = crypto_register_ahash(&sunxi_sha1_alg);
>>> + if (err)
>>> + goto error_sha1;
>>> + err = crypto_register_algs(sunxi_cipher_algs,
>>> + ARRAY_SIZE(sunxi_cipher_algs));
>>> + if (err)
>>> + goto error_ciphers;
>>> +
>>> + return 0;
>>> +error_ciphers:
>>> + crypto_unregister_ahash(&sunxi_sha1_alg);
>>> +error_sha1:
>>> + crypto_unregister_ahash(&sunxi_md5_alg);
>>> +error_md5:
>>> + clk_disable_unprepare(ss->ssclk);
>>> + clk_disable_unprepare(ss->busclk);
>>> + return err;
>>> +}
>>> +
>>> +static int __exit sunxi_ss_remove(struct platform_device *pdev)
>>> +{
>>> + if (!pdev->dev.of_node)
>>> + return 0;
>>
>> Redundant check.
>>
>
> Ok
>
>>
>>
>> --
>> With best wishes,
>> Vladimir
>>
>
> Thanks for the review
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists