| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAErSpo6ouE7AZi8ysTFnTNtKc8R9w-71AhXe6b-_0g_yeR-=Ag@mail.gmail.com>
Date: Tue, 28 Oct 2014 10:27:27 -0600
From: Bjorn Helgaas <bhelgaas@...gle.com>
To: Huang Rui <ray.huang@....com>
Cc: Felipe Balbi <balbi@...com>,
Alan Stern <stern@...land.harvard.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Paul Zimmerman <Paul.Zimmerman@...opsys.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Jason Chang <jason.chang@....com>,
Vincent Wan <vincent.wan@....com>, Tony Li <tony.li@....com>,
USB list <linux-usb@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 13/19] usb: dwc3: add tx demphasis quirk
On Tue, Oct 28, 2014 at 5:54 AM, Huang Rui <ray.huang@....com> wrote:
> This patch adds Tx demphasis quirk, and the Tx demphasis value is
"demphasis" (above and in subject) should be "de-emphasis" as used in
the code and comments below.
> configurable according to PIPE3 specification.
>
> Value Description
> 0 -6dB de-emphasis
> 1 -3.5dB de-emphasis
> 2 No de-emphasis
> 3 Reserved
>
> It can be configured on DT or platform data.
>
> Signed-off-by: Huang Rui <ray.huang@....com>
> ---
> drivers/usb/dwc3/core.c | 17 +++++++++++++++++
> drivers/usb/dwc3/core.h | 11 +++++++++++
> drivers/usb/dwc3/platform_data.h | 3 +++
> 3 files changed, 31 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 19019dc..e36fcd0 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -392,6 +392,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
> if (dwc->rx_detect_poll_quirk)
> reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL;
>
> + if (dwc->tx_deemph_quirk)
> + reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_deemph);
> +
> dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
>
> mdelay(100);
> @@ -691,6 +694,7 @@ static int dwc3_probe(struct platform_device *pdev)
> struct resource *res;
> struct dwc3 *dwc;
> u8 lpm_nyet_thres;
> + u8 tx_deemph;
>
> int ret;
>
> @@ -749,6 +753,9 @@ static int dwc3_probe(struct platform_device *pdev)
> /* default to highest possible threshold */
> lpm_nyet_thres = 0xff;
>
> + /* default to -3.5dB de-emphasis */
> + tx_deemph = 1;
> +
> if (node) {
> dwc->maximum_speed = of_usb_get_maximum_speed(node);
> dwc->has_lpm_erratum = of_property_read_bool(node,
> @@ -776,6 +783,11 @@ static int dwc3_probe(struct platform_device *pdev)
> "snps,lfps_filter_quirk");
> dwc->rx_detect_poll_quirk = of_property_read_bool(node,
> "snps,rx_detect_poll_quirk");
> +
> + dwc->tx_deemph_quirk = of_property_read_bool(node,
> + "snps,tx_deemph_quirk");
> + of_property_read_u8(node, "snps,tx_deemph",
> + &tx_deemph);
> } else if (pdata) {
> dwc->maximum_speed = pdata->maximum_speed;
> dwc->has_lpm_erratum = pdata->has_lpm_erratum;
> @@ -793,6 +805,10 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk;
> dwc->lfps_filter_quirk = pdata->lfps_filter_quirk;
> dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk;
> +
> + dwc->tx_deemph_quirk = pdata->tx_deemph_quirk;
> + if (pdata->tx_deemph)
> + tx_deemph = pdata->tx_deemph;
> }
>
> /* default to superspeed if no maximum_speed passed */
> @@ -800,6 +816,7 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc->maximum_speed = USB_SPEED_SUPER;
>
> dwc->lpm_nyet_thres = lpm_nyet_thres;
> + dwc->tx_deemph = tx_deemph;
>
> ret = dwc3_core_get_phy(dwc);
> if (ret)
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 57a203a..1277dcf 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -185,6 +185,8 @@
> #define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
> #define DWC3_GUSB3PIPECTL_LFPSFILT (1 << 9)
> #define DWC3_GUSB3PIPECTL_RX_DETOPOLL (1 << 8)
> +#define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK DWC3_GUSB3PIPECTL_TX_DEEPH(3)
> +#define DWC3_GUSB3PIPECTL_TX_DEEPH(n) ((n) << 1)
>
> /* Global TX Fifo Size Register */
> #define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
> @@ -695,6 +697,12 @@ struct dwc3_scratchpad_array {
> * @del_phy_power_chg_quirk: set if we enable delay phy power change quirk
> * @lfps_filter_quirk: set if we enable LFPS filter quirk
> * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
> + * @tx_deemph_quirk: set if we enable Tx deemphasis quirk
> + * @tx_deemph: Tx deemphasis value
> + * 0 - -6dB de-emphasis
> + * 1 - -3.5dB de-emphasis
> + * 2 - No de-emphasis
> + * 3 - Reserved
> */
> struct dwc3 {
> struct usb_ctrlrequest *ctrl_req;
> @@ -810,6 +818,9 @@ struct dwc3 {
> unsigned del_phy_power_chg_quirk:1;
> unsigned lfps_filter_quirk:1;
> unsigned rx_detect_poll_quirk:1;
> +
> + unsigned tx_deemph_quirk:1;
> + unsigned tx_deemph:2;
> };
>
> /* -------------------------------------------------------------------------- */
> diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
> index 9776764..ea631dc 100644
> --- a/drivers/usb/dwc3/platform_data.h
> +++ b/drivers/usb/dwc3/platform_data.h
> @@ -35,4 +35,7 @@ struct dwc3_platform_data {
> unsigned del_phy_power_chg_quirk:1;
> unsigned lfps_filter_quirk:1;
> unsigned rx_detect_poll_quirk:1;
> +
> + unsigned tx_deemph_quirk:1;
> + unsigned tx_deemph:2;
> };
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists