| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAErSpo7JeiJSD+-XAMZH+D8r9Knkq80KPUroYYbqak6EQ6f4RA@mail.gmail.com>
Date: Tue, 28 Oct 2014 10:30:50 -0600
From: Bjorn Helgaas <bhelgaas@...gle.com>
To: Huang Rui <ray.huang@....com>
Cc: Felipe Balbi <balbi@...com>,
Alan Stern <stern@...land.harvard.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Paul Zimmerman <Paul.Zimmerman@...opsys.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Jason Chang <jason.chang@....com>,
Vincent Wan <vincent.wan@....com>, Tony Li <tony.li@....com>,
USB list <linux-usb@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 05/19] usb: dwc3: add lpm erratum support
On Tue, Oct 28, 2014 at 5:54 AM, Huang Rui <ray.huang@....com> wrote:
> When parameter DWC_USB3_LPM_ERRATA_ENABLE is enabled in Andvanced
"Advanced"
> Configuration of coreConsultant, it supports of xHCI BESL Errata Dated
I can't parse "is supports of" and I don't know enough to suggest an
alternate wording.
> 10/19/2011 is enabled in host mode. In device mode it adds the capability
> to send NYET response threshold based on the BESL value received in the LPM
> token, and the threhold is configurable for each soc platform.
"threshold"
> This patch adds an entry that soc platform is able to define the lpm
> capacity with their own device tree or bus glue layer.
>
> Signed-off-by: Huang Rui <ray.huang@....com>
> ---
> drivers/usb/dwc3/core.c | 16 +++++++++++++++-
> drivers/usb/dwc3/core.h | 26 +++++++++++++++++---------
> drivers/usb/dwc3/gadget.c | 13 +++++++++++++
> drivers/usb/dwc3/platform_data.h | 2 ++
> 4 files changed, 47 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index c320835..4f37a43 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -652,6 +652,7 @@ static int dwc3_probe(struct platform_device *pdev)
> struct device_node *node = dev->of_node;
> struct resource *res;
> struct dwc3 *dwc;
> + u8 lpm_nyet_thres;
>
> int ret;
>
> @@ -707,16 +708,27 @@ static int dwc3_probe(struct platform_device *pdev)
> */
> res->start -= DWC3_GLOBALS_REGS_START;
>
> + /* default to highest possible threshold */
> + lpm_nyet_thres = 0xff;
> +
> if (node) {
> dwc->maximum_speed = of_usb_get_maximum_speed(node);
> + dwc->has_lpm_erratum = of_property_read_bool(node,
> + "snps,has-lpm-erratum");
> + of_property_read_u8(node, "snps,lpm-nyet-thres",
> + &lpm_nyet_thres);
>
> - dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
> + dwc->needs_fifo_resize = of_property_read_bool(node,
> + "tx-fifo-resize");
> dwc->dr_mode = of_usb_get_dr_mode(node);
>
> dwc->disable_scramble_quirk = of_property_read_bool(node,
> "snps,disable_scramble_quirk");
> } else if (pdata) {
> dwc->maximum_speed = pdata->maximum_speed;
> + dwc->has_lpm_erratum = pdata->has_lpm_erratum;
> + if (pdata->lpm_nyet_thres)
> + lpm_nyet_thres = pdata->lpm_nyet_thres;
>
> dwc->needs_fifo_resize = pdata->tx_fifo_resize;
> dwc->dr_mode = pdata->dr_mode;
> @@ -728,6 +740,8 @@ static int dwc3_probe(struct platform_device *pdev)
> if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
> dwc->maximum_speed = USB_SPEED_SUPER;
>
> + dwc->lpm_nyet_thres = lpm_nyet_thres;
> +
> ret = dwc3_core_get_phy(dwc);
> if (ret)
> return ret;
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 56bada6..19d1ecb 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -246,16 +246,19 @@
> #define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
>
> /* These apply for core versions 1.94a and later */
> -#define DWC3_DCTL_KEEP_CONNECT (1 << 19)
> -#define DWC3_DCTL_L1_HIBER_EN (1 << 18)
> -#define DWC3_DCTL_CRS (1 << 17)
> -#define DWC3_DCTL_CSS (1 << 16)
> +#define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf)
> +#define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20)
>
> -#define DWC3_DCTL_INITU2ENA (1 << 12)
> -#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
> -#define DWC3_DCTL_INITU1ENA (1 << 10)
> -#define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
> -#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
> +#define DWC3_DCTL_KEEP_CONNECT (1 << 19)
> +#define DWC3_DCTL_L1_HIBER_EN (1 << 18)
> +#define DWC3_DCTL_CRS (1 << 17)
> +#define DWC3_DCTL_CSS (1 << 16)
> +
> +#define DWC3_DCTL_INITU2ENA (1 << 12)
> +#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
> +#define DWC3_DCTL_INITU1ENA (1 << 10)
> +#define DWC3_DCTL_ACCEPTU1ENA (1 << 9)
> +#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
>
> #define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5)
> #define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
> @@ -664,6 +667,9 @@ struct dwc3_scratchpad_array {
> * @ep0_bounced: true when we used bounce buffer
> * @ep0_expect_in: true when we expect a DATA IN transfer
> * @has_hibernation: true when dwc3 was configured with Hibernation
> + * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
> + * there's now way for software to detect this in runtime.
"no way" (not "now way"). Also, "at runtime" is more idiomatic than
"in runtime."
> + * @lpm_nyet_thres: LPM NYET response threshold
> * @is_selfpowered: true when we are selfpowered
> * @is_fpga: true when we are using the FPGA board
> * @needs_fifo_resize: not all users might want fifo resizing, flag it
> @@ -769,6 +775,8 @@ struct dwc3 {
> unsigned ep0_bounced:1;
> unsigned ep0_expect_in:1;
> unsigned has_hibernation:1;
> + unsigned has_lpm_erratum:1;
> + unsigned lpm_nyet_thres:4;
> unsigned is_selfpowered:1;
> unsigned is_fpga:1;
> unsigned needs_fifo_resize:1;
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 7a64c2f..b918a65 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2297,6 +2297,19 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
> */
> reg |= DWC3_DCTL_HIRD_THRES(12);
>
> + /*
> + * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
> + * DCFG.LPMCap is set, core responses with an ACK and the
> + * BESL value in the LPM token is less than or equal to lPM
> + * NYET threshold.
> + */
> + WARN(dwc->revision < DWC3_REVISION_240A
> + && dwc->has_lpm_erratum,
> + "LPM Erratum not available on dwc3 revisisions < 2.40a\n");
> +
> + if (dwc->has_lpm_erratum)
> + reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_thres);
> +
> dwc3_writel(dwc->regs, DWC3_DCTL, reg);
> } else {
> reg = dwc3_readl(dwc->regs, DWC3_DCTL);
> diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
> index 9209d02..2e546ac 100644
> --- a/drivers/usb/dwc3/platform_data.h
> +++ b/drivers/usb/dwc3/platform_data.h
> @@ -26,4 +26,6 @@ struct dwc3_platform_data {
> bool tx_fifo_resize;
>
> unsigned disable_scramble_quirk:1;
> + unsigned has_lpm_erratum:1;
> + unsigned lpm_nyet_thres:4;
> };
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists