| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20141028170242.GA24112@csclub.uwaterloo.ca>
Date: Tue, 28 Oct 2014 13:02:42 -0400
From: "Lennart Sorensen" <lsorense@...lub.uwaterloo.ca>
To: linux-kernel@...r.kernel.org
Cc: Heiko Schocher <hs@...x.de>,
Len Sorensen <lsorense@...lub.uwaterloo.ca>,
Mugunthan V N <mugunthanvnm@...com>,
"David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Subject: Mistake in commit 0d961b3b52f566f823070ce2366511a7f64b928c breaks
cpsw non dual_emac mode.
I believe commit 0d961b3b52f566f823070ce2366511a7f64b928c made a mistake
while correcting a bug.
It was correct to fix (which applies only in dual_emac mode):
@@ -554,7 +554,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
* common for both the interface as the interface shares
* the same hardware resource.
*/
- for (i = 0; i <= priv->data.slaves; i++)
+ for (i = 0; i < priv->data.slaves; i++)
if (priv->slaves[i].ndev->flags & IFF_PROMISC)
flag = true;
since there i is used as an index into priv->slaves which is a 0 based array.
However the other two changes (which are only in non dual_emac mode):
@@ -578,7 +578,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
unsigned long timeout = jiffies + HZ;
/* Disable Learn for all ports */
- for (i = 0; i <= priv->data.slaves; i++) {
+ for (i = 0; i < priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 1);
cpsw_ale_control_set(ale, i,
@@ -606,7 +606,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 0);
/* Enable Learn for all ports */
- for (i = 0; i <= priv->data.slaves; i++) {
+ for (i = 0; i < priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 0);
cpsw_ale_control_set(ale, i,
are wrong since there i is actually the ALE port number, and port 0 is
the host port, while port 1 and up are the slave ports.
This should correct it back to working in non dual_emac mode.
Also make the comment point this out clearly to avoid future confusion
and fix a comment that was missing a "Don't".
Signed-off-by: lsorense@...lub.uwaterloo.ca
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 952e1e4..4683196 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -591,8 +591,8 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
if (enable) {
unsigned long timeout = jiffies + HZ;
- /* Disable Learn for all ports */
- for (i = 0; i < priv->data.slaves; i++) {
+ /* Disable Learn for all ports (host is port 0 and slaves are port 1 and up */
+ for (i = 0; i <= priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 1);
cpsw_ale_control_set(ale, i,
@@ -616,11 +616,11 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
dev_dbg(&ndev->dev, "promiscuity enabled\n");
} else {
- /* Flood All Unicast Packets to Host port */
+ /* Don't Flood All Unicast Packets to Host port */
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 0);
- /* Enable Learn for all ports */
- for (i = 0; i < priv->data.slaves; i++) {
+ /* Enable Learn for all ports (host is port 0 and slaves are port 1 and up */
+ for (i = 0; i <= priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 0);
cpsw_ale_control_set(ale, i,
--
Len Sorensen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists