linux-kernel - RE: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net on arndale platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <C89EFD3CD56F64468D3D206D683A8D2203985FA9@ldam-msx2.fugro-nl.local>
Date:	Tue, 4 Nov 2014 11:23:06 +0100
From:	"Stam, Michel [FINT]" <M.Stam@...ro.nl>
To:	"Riku Voipio" <riku.voipio@....fi>
Cc:	<davem@...emloft.net>, <linux-usb@...r.kernel.org>,
	<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-samsung-soc@...r.kernel.org>,
	<ckeepax@...nsource.wolfsonmicro.com>,
	"David Miller" <davem@...emloft.net>
Subject: RE: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net on arndale platform

Hello Riku,

>Fixing a bug (ethtool support) must not cause breakage elsewhere (in
this case on arndale). This is now a regression of functionality from
3.17.
>
>I think it would better to revert the change now and with less hurry
introduce a ethtool fix that doesn't break arndale.

I don't fully agree here; 
I would like to point out that this commit is a revert itself. Fixing
the armdale will then cause breakage in other implementations, such as
ours. Blankly reverting breaks other peoples' implementations.

The PHY reset is the thing that breaks ethtool support, so any fix that
appeases all would have to take existing PHY state into account. 

I'm not an expert on the ASIX driver, nor the MII, but I think this is
the cause;
drivers/net/usb/asix_devices.c:
   361      asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
BMCR_RESET);
   362      asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
   363              ADVERTISE_ALL | ADVERTISE_CSMA);
   364      mii_nway_restart(&dev->mii);

I would think that the ADVERTISE_ALL is the cause here, as it will reset
the MII back to default, thus overriding ethtool settings.
Would an:
Int reg;
reg = asix_mdio_read(dev->net,dev->mii.phy_id,MII_ADVERTISE);

prior to the offending lines, and then;

   362      asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
   363             reg);

solve the problem for you guys?

Mind, maybe the read function should take into account the reset value
of the MII, and set it to ADVERTISE_ALL | ADVERTISE_CSMA. I don't have
any documention here at the moment.

Is anyone able to confirm my suspicions?

Kind regards,

Michel Stam
-----Original Message-----
From: Riku Voipio [mailto:riku.voipio@....fi] 
Sent: Tuesday, November 04, 2014 10:44 AM
To: Stam, Michel [FINT]
Cc: Riku Voipio; davem@...emloft.net; linux-usb@...r.kernel.org;
netdev@...r.kernel.org; linux-kernel@...r.kernel.org;
linux-samsung-soc@...r.kernel.org; ckeepax@...nsource.wolfsonmicro.com
Subject: Re: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net
on arndale platform

On Tue, Nov 04, 2014 at 09:19:26AM +0100, Stam, Michel [FINT] wrote:
> Interesting, as the commit itself is a revert from a kernel back to 
> 2.6 somewhere. The problem I had is related to the PHY being reset on 
> interface-up, can you confirm that you require this?

I can't confirm what exactly is needed on arndale. I'm neither expert in
USB or ethernet. However, I can confirm that without the PHY reset,
networking doesn't work on arndale.

I now see someone else has the same problem, adding Charles to CC.

http://www.spinics.net/lists/linux-usb/msg116656.html

> Reverting this
> breaks ethtool support in turn.

Fixing a bug (ethtool support) must not cause breakage elsewhere (in
this case on arndale). This is now a regression of functionality from
3.17.

I think it would better to revert the change now and with less hurry
introduce a ethtool fix that doesn't break arndale.
 
> Kind regards,
> 
> Michel Stam
> 
> -----Original Message-----
> From: Riku Voipio [mailto:riku.voipio@....fi]
> Sent: Tuesday, November 04, 2014 8:23 AM
> To: davem@...emloft.net; Stam, Michel [FINT]
> Cc: linux-usb@...r.kernel.org; netdev@...r.kernel.org; 
> linux-kernel@...r.kernel.org; linux-samsung-soc@...r.kernel.org
> Subject: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net on

> arndale platform
> 
> Hi,
> 
> With 3.18-rc3, asix on arndale (samsung exynos 5250 based board), 
> fails to work. Interface is initialized but network traffic seem not 
> to pass through. With kernel IP config the result looks like:
> 
> [    3.323275] usb 3-3.2.4: new high-speed USB device number 4 using
> exynos-ehci
> [    3.419151] usb 3-3.2.4: New USB device found, idVendor=0b95,
> idProduct=772a
> [    3.424735] usb 3-3.2.4: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [    3.432196] usb 3-3.2.4: Product: AX88772 
> [    3.436279] usb 3-3.2.4: Manufacturer: ASIX Elec. Corp.
> [    3.441486] usb 3-3.2.4: SerialNumber: 000001
> [    3.447530] asix 3-3.2.4:1.0 (unnamed net_device) (uninitialized):
> invalid hw address, using random
> [    3.764352] asix 3-3.2.4:1.0 eth0: register 'asix' at
> usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet,
de:a2:66:bf:ca:4f
> [    4.488773] asix 3-3.2.4:1.0 eth0: link down
> [    5.690025] asix 3-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex,
lpa
> 0xC5E1
> [    5.712947] Sending DHCP requests ...... timed out!
> [   83.165303] IP-Config: Retrying forever (NFS root)...
> [   83.170397] asix 3-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex,
lpa
> 0xC5E1
> [   83.192944] Sending DHCP requests .....
> 
> Similar results also with dhclient. Git bisect identified the breaking

> commit as:
> 
> commit 3cc81d85ee01e5a0b7ea2f4190e2ed1165f53c31
> Author: Michel Stam <m.stam@...ro.nl>
> Date:   Thu Oct 2 10:22:02 2014 +0200
> 
>     asix: Don't reset PHY on if_up for ASIX 88772
> 
> Taking 3.18-rc3 and that commit reverted, network works again:
> 
> [    3.303500] usb 3-3.2.4: new high-speed USB device number 4 using
> exynos-ehci
> [    3.399375] usb 3-3.2.4: New USB device found, idVendor=0b95,
> idProduct=772a
> [    3.404963] usb 3-3.2.4: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [    3.412424] usb 3-3.2.4: Product: AX88772 
> [    3.416508] usb 3-3.2.4: Manufacturer: ASIX Elec. Corp.
> [    3.421715] usb 3-3.2.4: SerialNumber: 000001
> [    3.427755] asix 3-3.2.4:1.0 (unnamed net_device) (uninitialized):
> invalid hw address, using random
> [    3.744837] asix 3-3.2.4:1.0 eth0: register 'asix' at
> usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet,
12:59:f1:a8:43:90
> [    7.098998] asix 3-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex,
lpa
> 0xC5E1
> [    7.118258] Sending DHCP requests ., OK
> [    9.753259] IP-Config: Got DHCP answer from 192.168.1.1, my address
> is 192.168.1.111
> 
> There might something wrong on the samsung platform code (I understand

> the USB on arndale is "funny"), but this is still an regression from 
> 3.17.
> 
> Riku
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/