linux-kernel - [PATCH v2 1/2] drm/exynos: Fix DSI resuming fail because power domain being off

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 07 Nov 2014 14:53:58 +0100
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Inki Dae <inki.dae@...sung.com>,
	Joonyoung Shim <jy0922.shim@...sung.com>,
	Seung-Woo Kim <sw0312.kim@...sung.com>,
	Kyungmin Park <kyungmin.park@...sung.com>,
	David Airlie <airlied@...ux.ie>,
	Kukjin Kim <kgene.kim@...sung.com>,
	dri-devel@...ts.freedesktop.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:	Andrzej Hajda <a.hajda@...sung.com>,
	Marek Szyprowski <m.szyprowski@...sung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
	Grygorii Strashko <grygorii.strashko@...com>,
	Kevin Hilman <khilman@...nel.org>,
	Krzysztof Kozlowski <k.kozlowski@...sung.com>
Subject: [PATCH v2 1/2] drm/exynos: Fix DSI resuming fail because power domain
 being off

During system resume from suspend to RAM the Exynos DRM driver forced
CRTC mode thus turning display on (DPMS_ON). This lead to runtime resuming
of DSI which failed because whole LCD power domain was off and it was
not allowed to turn on because of system resume in progress.

Forcing mode should not be needed and removing it solves this particular
problem.

This necessary fix for following scenario reproduced on Exynos DRM:
1. Power domain is off before suspending the system.
2. System is suspended to RAM.
3. Resuming starts. The Exynos DRM driver resume callback is called.
4. The Exynos DRM driver calls drm_helper_resume_force_mode() which turns
   on the screen by calling exynos_dsi_dpms with DRM_MODE_DPMS_ON.
5. The Exynos DSI driver calls pm_runtime_get. The driver runtime
   resumes and this should turn LCD power domain on.
6. Unfortunately the domain cannot be turned on because system resume is
   in progress and genpd->prepared_count is positive.

Steps to reproduce:
1. Add runtime PM to Exynos DSI driver.
2. Build Exynos DRM/FB without FRAMEBUFFER_CONSOLE.
3. Enable the connector and screen (e.g. with modeset-vsync).
4. echo 3 > /sys/devices/platform/exynos-drm/graphics/fb0/blank
5. echo mem > /sys/power/state
6. Resume.
[   77.712469] PM: early resume of devices complete after 3.854 msecs
[   77.712739] exynos-dsi 11c80000.dsi: pm_genpd_resume()
[   77.712758] exynos4-fimc 11800000.fimc: pm_genpd_resume()
[   77.712774] exynos4-fimc 11810000.fimc: pm_genpd_resume()
[   77.712787] exynos-drm-fimc 11820000.fimc: pm_genpd_resume()
[   77.712802] exynos-drm-fimc 11830000.fimc: pm_genpd_resume()
[   77.712815] s5p-mipi-csis 11880000.csis: pm_genpd_resume()
[   77.712829] s5p-mipi-csis 11890000.csis: pm_genpd_resume()
[   77.712843] exynos-fimc-lite 12390000.fimc-lite: pm_genpd_resume()
[   77.712856] exynos-fimc-lite 123a0000.fimc-lite: pm_genpd_resume()
[   77.713788] exynos4-fb 11c00000.fimd: pm_genpd_resume()
[   77.713912] wake disabled for irq 184
[   77.713923] wake disabled for irq 185
[   77.714082] wake disabled for irq 173
[   77.715676] wake disabled for irq 176
[   77.718540] exynos4-fb 11c00000.fimd: pm_genpd_runtime_resume()
[   77.718567] exynos4-fb 11c00000.fimd: state restore latency exceeded, new value 1708 ns
[   77.718636] exynos-dsi 11c80000.dsi: pm_genpd_runtime_resume()
[   77.892366] exynos-dsi 11c80000.dsi: PLL failed to stabilize
[   77.892377] exynos-dsi 11c80000.dsi: failed to configure DSI PLL
[   78.192168] exynos-dsi 11c80000.dsi: timeout waiting for reset
[   78.211578] exynos-dsi 11c80000.dsi: waiting for bus lanes timed out
[   78.307173] exynos-dsi 11c80000.dsi: xfer timed out: d1 00 (null)
[   78.307190] panel_s6e8aa0 11c80000.dsi.0: error -110 reading dcs seq(0xd1)
[   78.307199] panel_s6e8aa0 11c80000.dsi.0: read id failed

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
---
 drivers/gpu/drm/exynos/exynos_drm_drv.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index d32165a7f862..8f7110c9d21f 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -200,8 +200,6 @@ static int exynos_drm_resume(struct drm_device *dev)
 	}
 	drm_modeset_unlock_all(dev);
 
-	drm_helper_resume_force_mode(dev);
-
 	return 0;
 }
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/