lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <546AF828.7050806@rock-chips.com>
Date:	Tue, 18 Nov 2014 15:41:28 +0800
From:	Caesar Wang <caesar.wang@...k-chips.com>
To:	heiko@...ech.de, rui.zhang@...el.com, edubezval@...il.com
CC:	zyf@...k-chips.com, dianders@...omium.org,
	linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
	cf@...k-chips.com, dmitry.torokhov@...il.com,
	huangtao@...k-chips.com, fzf@...k-chips.com
Subject: Re: [PATCH v18 2/5] thermal: rockchip: add driver for thermal

Hello edubezval,

I saw your latest patch[0].
I need send the new patch to fit the of-thermal Sensors API.
Right?

[0]: https://patchwork.kernel.org/patch/5324371/

在 2014年11月12日 13:02, Caesar Wang 写道:
> Thermal is TS-ADC Controller module supports
> user-defined mode and automatic mode.
>
> User-defined mode refers,TSADC all the control signals entirely by
> software writing to register for direct control.
>
> Automaic mode refers to the module automatically poll TSADC output,
> and the results were checked.If you find that the temperature High
> in a period of time,an interrupt is generated to the processor
> down-measures taken;If the temperature over a period of time High,
> the resulting TSHUT gave CRU module,let it reset the entire chip,
> or via GPIO give PMIC.
>
> Signed-off-by: zhaoyifeng <zyf@...k-chips.com>
> Signed-off-by: Caesar Wang <caesar.wang@...k-chips.com>
> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
> ---
>   drivers/thermal/Kconfig            |  10 +
>   drivers/thermal/Makefile           |   1 +
>   drivers/thermal/rockchip_thermal.c | 721 +++++++++++++++++++++++++++++++++++++
>   3 files changed, 732 insertions(+)
>   create mode 100644 drivers/thermal/rockchip_thermal.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index ef5587f..527632d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -133,6 +133,16 @@ config SPEAR_THERMAL
>   	  Enable this to plug the SPEAr thermal sensor driver into the Linux
>   	  thermal framework.
>   
> +config ROCKCHIP_THERMAL
> +	tristate "Rockchip thermal driver"
> +	depends on ARCH_ROCKCHIP
> +	depends on RESET_CONTROLLER
> +	help
> +	  Rockchip thermal driver provides support for Temperature sensor
> +	  ADC (TS-ADC) found on Rockchip SoCs. It supports one critical
> +	  trip point. Cpufreq is used as the cooling device and will throttle
> +	  CPUs when the Temperature crosses the passive trip point.
> +
>   config RCAR_THERMAL
>   	tristate "Renesas R-Car thermal driver"
>   	depends on ARCH_SHMOBILE || COMPILE_TEST
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 31e232f..21da0a8 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -19,6 +19,7 @@ thermal_sys-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
>   
>   # platform thermal drivers
>   obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
> +obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
>   obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
>   obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
>   obj-y				+= samsung/
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> new file mode 100644
> index 0000000..524e3d6
> --- /dev/null
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -0,0 +1,721 @@
> +/*
> + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/thermal.h>
> +
> +/**
> + * If the temperature over a period of time High,
> + * the resulting TSHUT gave CRU module,let it reset the entire chip,
> + * or via GPIO give PMIC.
> + */
> +enum tshut_mode {
> +	TSHUT_MODE_CRU = 0,
> +	TSHUT_MODE_GPIO,
> +};
> +
> +/**
> + * the system Temperature Sensors tshut(tshut) polarity
> + * the bit 8 is tshut polarity.
> + * 0: low active, 1: high active
> + */
> +enum tshut_polarity {
> +	TSHUT_LOW_ACTIVE = 0,
> +	TSHUT_HIGH_ACTIVE,
> +};
> +
> +/**
> + * The system has three Temperature Sensors.  channel 0 is reserved,
> + * channel 1 is for CPU, and channel 2 is for GPU.
> + */
> +enum sensor_id {
> +	SENSOR_CPU = 1,
> +	SENSOR_GPU,
> +};
> +
> +struct rockchip_tsadc_chip {
> +	/* The hardware-controlled tshut property */
> +	long tshut_temp;
> +	enum tshut_mode tshut_mode;
> +	enum tshut_polarity tshut_polarity;
> +
> +	/* Chip-wide methods */
> +	void (*initialize)(void __iomem *reg, enum tshut_polarity p);
> +	void (*irq_ack)(void __iomem *reg);
> +	void (*control)(void __iomem *reg, bool on);
> +
> +	/* Per-sensor methods */
> +	int (*get_temp)(int chn, void __iomem *reg, long *temp);
> +	void (*set_alarm_temp)(int chn, void __iomem *reg, long temp);
> +	void (*set_tshut_temp)(int chn, void __iomem *reg, long temp);
> +	void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m);
> +};
> +
> +struct rockchip_thermal_sensor {
> +	struct rockchip_thermal_data *thermal;
> +	struct thermal_zone_device *tzd;
> +	enum sensor_id id;
> +};
> +
> +#define NUM_SENSORS	2 /* Ignore unused sensor 0 */
> +
> +struct rockchip_thermal_data {
> +	const struct rockchip_tsadc_chip *chip;
> +	struct platform_device *pdev;
> +	struct reset_control *reset;
> +
> +	struct rockchip_thermal_sensor sensors[NUM_SENSORS];
> +
> +	struct clk *clk;
> +	struct clk *pclk;
> +
> +	void __iomem *regs;
> +
> +	long tshut_temp;
> +	enum tshut_mode tshut_mode;
> +	enum tshut_polarity tshut_polarity;
> +};
> +
> +/* TSADC V2 Sensor info define: */
> +#define TSADCV2_AUTO_CON			0x04
> +#define TSADCV2_INT_EN				0x08
> +#define TSADCV2_INT_PD				0x0c
> +#define TSADCV2_DATA(chn)			(0x20 + (chn) * 0x04)
> +#define TSADCV2_COMP_INT(chn)		        (0x30 + (chn) * 0x04)
> +#define TSADCV2_COMP_SHUT(chn)		        (0x40 + (chn) * 0x04)
> +#define TSADCV2_HIGHT_INT_DEBOUNCE		0x60
> +#define TSADCV2_HIGHT_TSHUT_DEBOUNCE		0x64
> +#define TSADCV2_AUTO_PERIOD			0x68
> +#define TSADCV2_AUTO_PERIOD_HT			0x6c
> +
> +#define TSADCV2_AUTO_EN				BIT(0)
> +#define TSADCV2_AUTO_DISABLE			~BIT(0)
> +#define TSADCV2_AUTO_SRC_EN(chn)		BIT(4 + (chn))
> +#define TSADCV2_AUTO_TSHUT_POLARITY_HIGH	BIT(8)
> +#define TSADCV2_AUTO_TSHUT_POLARITY_LOW		~BIT(8)
> +
> +#define TSADCV2_INT_SRC_EN(chn)			BIT(chn)
> +#define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
> +#define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
> +
> +#define TSADCV2_INT_PD_CLEAR			~BIT(8)
> +
> +#define TSADCV2_DATA_MASK			0xfff
> +#define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT	4
> +#define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT	4
> +#define TSADCV2_AUTO_PERIOD_TIME		250 /* msec */
> +#define TSADCV2_AUTO_PERIOD_HT_TIME		50  /* msec */
> +
> +struct tsadc_table {
> +	unsigned long code;
> +	long temp;
> +};
> +
> +static const struct tsadc_table v2_code_table[] = {
> +	{TSADCV2_DATA_MASK, -40000},
> +	{3800, -40000},
> +	{3792, -35000},
> +	{3783, -30000},
> +	{3774, -25000},
> +	{3765, -20000},
> +	{3756, -15000},
> +	{3747, -10000},
> +	{3737, -5000},
> +	{3728, 0},
> +	{3718, 5000},
> +	{3708, 10000},
> +	{3698, 15000},
> +	{3688, 20000},
> +	{3678, 25000},
> +	{3667, 30000},
> +	{3656, 35000},
> +	{3645, 40000},
> +	{3634, 45000},
> +	{3623, 50000},
> +	{3611, 55000},
> +	{3600, 60000},
> +	{3588, 65000},
> +	{3575, 70000},
> +	{3563, 75000},
> +	{3550, 80000},
> +	{3537, 85000},
> +	{3524, 90000},
> +	{3510, 95000},
> +	{3496, 100000},
> +	{3482, 105000},
> +	{3467, 110000},
> +	{3452, 115000},
> +	{3437, 120000},
> +	{3421, 125000},
> +	{0, 125000},
> +};
> +
> +static u32 rk_tsadcv2_temp_to_code(long temp)
> +{
> +	int high, low, mid;
> +
> +	low = 0;
> +	high = ARRAY_SIZE(v2_code_table) - 1;
> +	mid = (high + low) / 2;
> +
> +	if (temp < v2_code_table[low].temp || temp > v2_code_table[high].temp)
> +		return 0;
> +
> +	while (low <= high) {
> +		if (temp == v2_code_table[mid].temp)
> +			return v2_code_table[mid].code;
> +		else if (temp < v2_code_table[mid].temp)
> +			high = mid - 1;
> +		else
> +			low = mid + 1;
> +		mid = (low + high) / 2;
> +	}
> +
> +	return 0;
> +}
> +
> +static long rk_tsadcv2_code_to_temp(u32 code)
> +{
> +	int high, low, mid;
> +
> +	low = 0;
> +	high = ARRAY_SIZE(v2_code_table) - 1;
> +	mid = (high + low) / 2;
> +
> +	if (code > v2_code_table[low].code || code < v2_code_table[high].code)
> +		return 125000; /* No code available, return max temperature */
> +
> +	while (low <= high) {
> +		if (code >= v2_code_table[mid].code && code <
> +		    v2_code_table[mid - 1].code)
> +			return v2_code_table[mid].temp;
> +		else if (code < v2_code_table[mid].code)
> +			low = mid + 1;
> +		else
> +			high = mid - 1;
> +		mid = (low + high) / 2;
> +	}
> +
> +	return 125000;
> +}
> +
> +/**
> + * rk_tsadcv2_initialize - initialize TASDC Controller
> + * (1) Set TSADCV2_AUTO_PERIOD, configure the interleave between
> + * every two accessing of TSADC in normal operation.
> + * (2) Set TSADCV2_AUTO_PERIOD_HT, configure the interleave between
> + * every two accessing of TSADC after the temperature is higher
> + * than COM_SHUT or COM_INT.
> + * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE,
> + * if the temperature is higher than COMP_INT or COMP_SHUT for
> + * "debounce" times, TSADC controller will generate interrupt or TSHUT.
> + */
> +static void rk_tsadcv2_initialize(void __iomem *regs,
> +				  enum tshut_polarity tshut_polarity)
> +{
> +	if (tshut_polarity == TSHUT_HIGH_ACTIVE)
> +		writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_HIGH),
> +			       regs + TSADCV2_AUTO_CON);
> +	else
> +		writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_LOW),
> +			       regs + TSADCV2_AUTO_CON);
> +
> +	writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
> +	writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
> +		       regs + TSADCV2_HIGHT_INT_DEBOUNCE);
> +	writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME,
> +		       regs + TSADCV2_AUTO_PERIOD_HT);
> +	writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
> +		       regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
> +}
> +
> +static void rk_tsadcv2_irq_ack(void __iomem *regs)
> +{
> +	u32 val;
> +
> +	val = readl_relaxed(regs + TSADCV2_INT_PD);
> +	writel_relaxed(val & TSADCV2_INT_PD_CLEAR, regs + TSADCV2_INT_PD);
> +}
> +
> +static void rk_tsadcv2_control(void __iomem *regs, bool enable)
> +{
> +	u32 val;
> +
> +	val = readl_relaxed(regs + TSADCV2_AUTO_CON);
> +	if (enable)
> +		val |= TSADCV2_AUTO_EN;
> +	else
> +		val &= ~TSADCV2_AUTO_EN;
> +
> +	writel_relaxed(val, regs + TSADCV2_AUTO_CON);
> +}
> +
> +static int rk_tsadcv2_get_temp(int chn, void __iomem *regs, long *temp)
> +{
> +	u32 val;
> +
> +	/* the A/D value of the channel last conversion need some time */
> +	val = readl_relaxed(regs + TSADCV2_DATA(chn));
> +	if (val == 0)
> +		return -EAGAIN;
> +
> +	*temp = rk_tsadcv2_code_to_temp(val);
> +
> +	return 0;
> +}
> +
> +static void rk_tsadcv2_alarm_temp(int chn, void __iomem *regs, long temp)
> +{
> +	u32 alarm_value, int_en;
> +
> +	alarm_value = rk_tsadcv2_temp_to_code(temp);
> +	writel_relaxed(alarm_value & TSADCV2_DATA_MASK,
> +		       regs + TSADCV2_COMP_INT(chn));
> +
> +	int_en = readl_relaxed(regs + TSADCV2_INT_EN);
> +	int_en |= TSADCV2_INT_SRC_EN(chn);
> +	writel_relaxed(int_en, regs + TSADCV2_INT_EN);
> +}
> +
> +static void rk_tsadcv2_tshut_temp(int chn, void __iomem *regs, long temp)
> +{
> +	u32 tshut_value, val;
> +
> +	tshut_value = rk_tsadcv2_temp_to_code(temp);
> +	writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn));
> +
> +	/* TSHUT will be valid */
> +	val = readl_relaxed(regs + TSADCV2_AUTO_CON);
> +	writel_relaxed(val | TSADCV2_AUTO_SRC_EN(chn), regs + TSADCV2_AUTO_CON);
> +}
> +
> +static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
> +				  enum tshut_mode mode)
> +{
> +	u32 val;
> +
> +	val = readl_relaxed(regs + TSADCV2_INT_EN);
> +	if (mode == TSHUT_MODE_GPIO) {
> +		val &= ~TSADCV2_SHUT_2CRU_SRC_EN(chn);
> +		val |= TSADCV2_SHUT_2GPIO_SRC_EN(chn);
> +	} else {
> +		val &= ~TSADCV2_SHUT_2GPIO_SRC_EN(chn);
> +		val |= TSADCV2_SHUT_2CRU_SRC_EN(chn);
> +	}
> +
> +	writel_relaxed(val, regs + TSADCV2_INT_EN);
> +}
> +
> +static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
> +	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
> +	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
> +	.tshut_temp = 95000,
> +
> +	.initialize = rk_tsadcv2_initialize,
> +	.irq_ack = rk_tsadcv2_irq_ack,
> +	.control = rk_tsadcv2_control,
> +	.get_temp = rk_tsadcv2_get_temp,
> +	.set_alarm_temp = rk_tsadcv2_alarm_temp,
> +	.set_tshut_temp = rk_tsadcv2_tshut_temp,
> +	.set_tshut_mode = rk_tsadcv2_tshut_mode,
> +};
> +
> +static const struct of_device_id of_rockchip_thermal_match[] = {
> +	{
> +		.compatible = "rockchip,rk3288-tsadc",
> +		.data = (void *)&rk3288_tsadc_data,
> +	},
> +	{ /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
> +
> +static void
> +rockchip_thermal_toggle_sensor(struct rockchip_thermal_sensor *sensor, bool on)
> +{
> +	struct thermal_zone_device *tzd = sensor->tzd;
> +
> +	tzd->ops->set_mode(tzd,
> +		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
> +}
> +
> +static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev)
> +{
> +	struct rockchip_thermal_data *thermal = dev;
> +	int i;
> +
> +	dev_dbg(&thermal->pdev->dev, "thermal alarm\n");
> +
> +	thermal->chip->irq_ack(thermal->regs);
> +
> +	for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
> +		thermal_zone_device_update(thermal->sensors[i].tzd);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int rockchip_thermal_set_trips(void *_sensor, long low, long high)
> +{
> +	struct rockchip_thermal_sensor *sensor = _sensor;
> +	struct rockchip_thermal_data *thermal = sensor->thermal;
> +	const struct rockchip_tsadc_chip *tsadc = thermal->chip;
> +
> +	dev_dbg(&thermal->pdev->dev, "%s: sensor %d: low: %ld, high %ld\n",
> +		__func__, sensor->id, low, high);
> +
> +	tsadc->set_alarm_temp(sensor->id, thermal->regs, high);
> +
> +	return 0;
> +}
> +
> +static int rockchip_thermal_get_temp(void *_sensor, long *out_temp)
> +{
> +	struct rockchip_thermal_sensor *sensor = _sensor;
> +	struct rockchip_thermal_data *thermal = sensor->thermal;
> +	const struct rockchip_tsadc_chip *tsadc = sensor->thermal->chip;
> +	int retval;
> +
> +	retval = tsadc->get_temp(sensor->id, thermal->regs, out_temp);
> +	dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %ld, retval: %d\n",
> +		sensor->id, *out_temp, retval);
> +
> +	return retval;
> +}
> +
> +static int rockchip_configure_from_dt(struct device *dev,
> +				      struct device_node *np,
> +				      struct rockchip_thermal_data *thermal)
> +{
> +	u32 shut_temp, tshut_mode, tshut_polarity;
> +
> +	if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) {
> +		dev_warn(dev,
> +			 "Missing tshut temp property, using default %ld\n",
> +			 thermal->chip->tshut_temp);
> +		thermal->tshut_temp = thermal->chip->tshut_temp;
> +	} else {
> +		thermal->tshut_temp = shut_temp;
> +	}
> +
> +	if (thermal->tshut_temp > INT_MAX) {
> +		dev_err(dev, "Invalid tshut temperature specified: %ld\n",
> +			thermal->tshut_temp);
> +		return -ERANGE;
> +	}
> +
> +	if (of_property_read_u32(np, "rockchip,hw-tshut-mode", &tshut_mode)) {
> +		dev_warn(dev,
> +			 "Missing tshut mode property, using default (%s)\n",
> +			 thermal->chip->tshut_mode == TSHUT_MODE_GPIO ?
> +				"gpio" : "cru");
> +		thermal->tshut_mode = thermal->chip->tshut_mode;
> +	} else {
> +		thermal->tshut_mode = tshut_mode;
> +	}
> +
> +	if (thermal->tshut_mode > 1) {
> +		dev_err(dev, "Invalid tshut mode specified: %d\n",
> +			thermal->tshut_mode);
> +		return -EINVAL;
> +	}
> +
> +	if (of_property_read_u32(np, "rockchip,hw-tshut-polarity",
> +				 &tshut_polarity)) {
> +		dev_warn(dev,
> +			 "Missing tshut-polarity property, using default (%s)\n",
> +			 thermal->chip->tshut_polarity == TSHUT_LOW_ACTIVE ?
> +				"low" : "high");
> +		thermal->tshut_polarity = thermal->chip->tshut_polarity;
> +	} else {
> +		thermal->tshut_polarity = tshut_polarity;
> +	}
> +
> +	if (thermal->tshut_polarity > 1) {
> +		dev_err(dev, "Invalid tshut-polarity specified: %d\n",
> +			thermal->tshut_polarity);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int
> +rockchip_thermal_register_sensor(struct platform_device *pdev,
> +				 struct rockchip_thermal_data *thermal,
> +				 struct rockchip_thermal_sensor *sensor,
> +				 enum sensor_id id)
> +{
> +	const struct rockchip_tsadc_chip *tsadc = thermal->chip;
> +	int error;
> +
> +	tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode);
> +	tsadc->set_tshut_temp(id, thermal->regs, thermal->tshut_temp);
> +
> +	sensor->thermal = thermal;
> +	sensor->id = id;
> +	sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, id, sensor,
> +						rockchip_thermal_get_temp,
> +						NULL,
> +						rockchip_thermal_set_trips);
> +	if (IS_ERR(sensor->tzd)) {
> +		error = PTR_ERR(sensor->tzd);
> +		dev_err(&pdev->dev, "failed to register sensor %d: %d\n",
> +			id, error);
> +		return error;
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * Reset TSADC Controller, reset all tsadc registers.
> + */
> +static void rockchip_thermal_reset_controller(struct reset_control *reset)
> +{
> +	reset_control_assert(reset);
> +	usleep_range(10, 20);
> +	reset_control_deassert(reset);
> +}
> +
> +static int rockchip_thermal_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct rockchip_thermal_data *thermal;
> +	const struct of_device_id *match;
> +	struct resource *res;
> +	int irq;
> +	int i;
> +	int error;
> +
> +	match = of_match_node(of_rockchip_thermal_match, np);
> +	if (!match)
> +		return -ENXIO;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(&pdev->dev, "no irq resource?\n");
> +		return -EINVAL;
> +	}
> +
> +	thermal = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_thermal_data),
> +			       GFP_KERNEL);
> +	if (!thermal)
> +		return -ENOMEM;
> +
> +	thermal->pdev = pdev;
> +
> +	thermal->chip = (const struct rockchip_tsadc_chip *)match->data;
> +	if (!thermal->chip)
> +		return -EINVAL;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	thermal->regs = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(thermal->regs))
> +		return PTR_ERR(thermal->regs);
> +
> +	thermal->reset = devm_reset_control_get(&pdev->dev, "tsadc-apb");
> +	if (IS_ERR(thermal->reset)) {
> +		error = PTR_ERR(thermal->reset);
> +		dev_err(&pdev->dev, "failed to get tsadc reset: %d\n", error);
> +		return error;
> +	}
> +
> +	thermal->clk = devm_clk_get(&pdev->dev, "tsadc");
> +	if (IS_ERR(thermal->clk)) {
> +		error = PTR_ERR(thermal->clk);
> +		dev_err(&pdev->dev, "failed to get tsadc clock: %d\n", error);
> +		return error;
> +	}
> +
> +	thermal->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
> +	if (IS_ERR(thermal->pclk)) {
> +		error = PTR_ERR(thermal->clk);
> +		dev_err(&pdev->dev, "failed to get apb_pclk clock: %d\n",
> +			error);
> +		return error;
> +	}
> +
> +	error = clk_prepare_enable(thermal->clk);
> +	if (error) {
> +		dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
> +			error);
> +		return error;
> +	}
> +
> +	error = clk_prepare_enable(thermal->pclk);
> +	if (error) {
> +		dev_err(&pdev->dev, "failed to enable pclk: %d\n", error);
> +		goto err_disable_clk;
> +	}
> +
> +	rockchip_thermal_reset_controller(thermal->reset);
> +
> +	error = rockchip_configure_from_dt(&pdev->dev, np, thermal);
> +	if (error) {
> +		dev_err(&pdev->dev, "failed to parse device tree data: %d\n",
> +			error);
> +		goto err_disable_pclk;
> +	}
> +
> +	thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
> +
> +	error = rockchip_thermal_register_sensor(pdev, thermal,
> +						 &thermal->sensors[0],
> +						 SENSOR_CPU);
> +	if (error) {
> +		dev_err(&pdev->dev,
> +			"failed to register CPU thermal sensor: %d\n", error);
> +		goto err_disable_pclk;
> +	}
> +
> +	error = rockchip_thermal_register_sensor(pdev, thermal,
> +						 &thermal->sensors[1],
> +						 SENSOR_GPU);
> +	if (error) {
> +		dev_err(&pdev->dev,
> +			"failed to register GPU thermal sensor: %d\n", error);
> +		goto err_unregister_cpu_sensor;
> +	}
> +
> +	error = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> +					  &rockchip_thermal_alarm_irq_thread,
> +					  IRQF_ONESHOT,
> +					  "rockchip_thermal", thermal);
> +	if (error) {
> +		dev_err(&pdev->dev,
> +			"failed to request tsadc irq: %d\n", error);
> +		goto err_unregister_gpu_sensor;
> +	}
> +
> +	thermal->chip->control(thermal->regs, true);
> +
> +	for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
> +		rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
> +
> +	platform_set_drvdata(pdev, thermal);
> +
> +	return 0;
> +
> +err_unregister_gpu_sensor:
> +	thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[1].tzd);
> +err_unregister_cpu_sensor:
> +	thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[0].tzd);
> +err_disable_pclk:
> +	clk_disable_unprepare(thermal->pclk);
> +err_disable_clk:
> +	clk_disable_unprepare(thermal->clk);
> +
> +	return error;
> +}
> +
> +static int rockchip_thermal_remove(struct platform_device *pdev)
> +{
> +	struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) {
> +		struct rockchip_thermal_sensor *sensor = &thermal->sensors[i];
> +
> +		rockchip_thermal_toggle_sensor(sensor, false);
> +		thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd);
> +	}
> +
> +	thermal->chip->control(thermal->regs, false);
> +
> +	clk_disable_unprepare(thermal->pclk);
> +	clk_disable_unprepare(thermal->clk);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
> +		rockchip_thermal_toggle_sensor(&thermal->sensors[i], false);
> +
> +	thermal->chip->control(thermal->regs, false);
> +
> +	clk_disable(thermal->pclk);
> +	clk_disable(thermal->clk);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused rockchip_thermal_resume(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
> +	int i;
> +	int error;
> +
> +	error = clk_enable(thermal->clk);
> +	if (error)
> +		return error;
> +
> +	error = clk_enable(thermal->pclk);
> +	if (error)
> +		return error;
> +
> +	rockchip_thermal_reset_controller(thermal->reset);
> +
> +	thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
> +
> +	for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) {
> +		enum sensor_id id = thermal->sensors[i].id;
> +
> +		thermal->chip->set_tshut_mode(id, thermal->regs,
> +					      thermal->tshut_mode);
> +		thermal->chip->set_tshut_temp(id, thermal->regs,
> +					      thermal->tshut_temp);
> +	}
> +
> +	thermal->chip->control(thermal->regs, true);
> +
> +	for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
> +		rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(rockchip_thermal_pm_ops,
> +			 rockchip_thermal_suspend, rockchip_thermal_resume);
> +
> +static struct platform_driver rockchip_thermal_driver = {
> +	.driver = {
> +		.name = "rockchip-thermal",
> +		.owner = THIS_MODULE,
> +		.pm = &rockchip_thermal_pm_ops,
> +		.of_match_table = of_rockchip_thermal_match,
> +	},
> +	.probe = rockchip_thermal_probe,
> +	.remove = rockchip_thermal_remove,
> +};
> +
> +module_platform_driver(rockchip_thermal_driver);
> +
> +MODULE_DESCRIPTION("ROCKCHIP THERMAL Driver");
> +MODULE_AUTHOR("Rockchip, Inc.");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:rockchip-thermal");

-- 
Best regards,
Caesar


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ