| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20141127193213.GB4190@pd.tnic>
Date: Thu, 27 Nov 2014 20:32:13 +0100
From: Borislav Petkov <bp@...en8.de>
To: tip-bot for Jiang Liu <tipbot@...or.com>
Cc: linux-tip-commits@...r.kernel.org, mingo@...nel.org,
rdunlap@...radead.org, bhelgaas@...gle.com, hpa@...or.com,
tony.luck@...el.com, rjw@...ysocki.net, jiang.liu@...ux.intel.com,
grant.likely@...aro.org, konrad.wilk@...cle.com,
gregkh@...uxfoundation.org, tglx@...utronix.de, yinghai@...nel.org,
joro@...tes.org, linux-kernel@...r.kernel.org,
benh@...nel.crashing.org, jroedel@...e.de
Subject: Re: [tip:x86/apic] x86, irq: Use cached IOAPIC entry instead of
reading from hardware
On Wed, Nov 26, 2014 at 03:20:08PM -0800, tip-bot for Jiang Liu wrote:
> Commit-ID: fda7c08b1349cc4c65f8a5240b10f7e9938604b8
> Gitweb: http://git.kernel.org/tip/fda7c08b1349cc4c65f8a5240b10f7e9938604b8
> Author: Jiang Liu <jiang.liu@...ux.intel.com>
> AuthorDate: Tue, 25 Nov 2014 15:49:53 +0800
> Committer: Thomas Gleixner <tglx@...utronix.de>
> CommitDate: Wed, 26 Nov 2014 23:52:49 +0100
>
> x86, irq: Use cached IOAPIC entry instead of reading from hardware
>
> Use cached IOAPIC entry instead of reading data from IOAPIC hardware
> registers to improve performance.
>
> Signed-off-by: Jiang Liu <jiang.liu@...ux.intel.com>
> Cc: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
> Cc: Tony Luck <tony.luck@...el.com>
> Cc: Joerg Roedel <joro@...tes.org>
> Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
> Cc: Bjorn Helgaas <bhelgaas@...gle.com>
> Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
> Cc: Rafael J. Wysocki <rjw@...ysocki.net>
> Cc: Randy Dunlap <rdunlap@...radead.org>
> Cc: Yinghai Lu <yinghai@...nel.org>
> Cc: Borislav Petkov <bp@...en8.de>
> Cc: Grant Likely <grant.likely@...aro.org>
> Link: http://lkml.kernel.org/r/1416901802-24211-30-git-send-email-jiang.liu@linux.intel.com
> Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
> Tested-by: Joerg Roedel <jroedel@...e.de>
> ---
> arch/x86/kernel/apic/io_apic.c | 78 ++++++++++++------------------------------
> 1 file changed, 21 insertions(+), 57 deletions(-)
>
> diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
> index a915ee0..8a62933 100644
> --- a/arch/x86/kernel/apic/io_apic.c
> +++ b/arch/x86/kernel/apic/io_apic.c
> @@ -69,8 +69,13 @@
> int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity);
>
> /*
> - * Is the SiS APIC rmw bug present ?
> + * Is the SiS APIC rmw bug present ?
> * -1 = don't know, 0 = no, 1 = yes
> + * When doing a read-modify-write operation on IOAPIC registers, older SiS APIC
> + * requires we rewrite the index register again where the read already set up
> + * the index register.
> + * The code to make use of sis_apic_bug has been removed, but we don't want to
> + * loss this knowledge.
> */
> int sis_apic_bug = -1;
>
> @@ -290,22 +295,6 @@ static void io_apic_write(unsigned int apic, unsigned int reg,
> writel(value, &io_apic->data);
> }
>
> -/*
> - * Re-write a value: to be used for read-modify-write
> - * cycles where the read already set up the index register.
> - *
> - * Older SiS APIC requires we rewrite the index register
> - */
> -static void io_apic_modify(unsigned int apic, unsigned int reg,
> - unsigned int value)
> -{
> - struct io_apic __iomem *io_apic = io_apic_base(apic);
> -
> - if (sis_apic_bug)
> - writel(reg, &io_apic->index);
> - writel(value, &io_apic->data);
> -}
> -
> union entry_union {
> struct { u32 w1, w2; };
> struct IO_APIC_route_entry entry;
> @@ -442,29 +431,23 @@ static void __init replace_pin_at_irq_node(struct mp_chip_data *data, int node,
> add_pin_to_irq_node(data, node, newapic, newpin);
> }
>
> -static void __io_apic_modify_irq(struct irq_pin_list *entry,
> - int mask_and, int mask_or,
> - void (*final)(struct irq_pin_list *entry))
> -{
> - unsigned int reg, pin;
> -
> - pin = entry->pin;
> - reg = io_apic_read(entry->apic, 0x10 + pin * 2);
> - reg &= mask_and;
> - reg |= mask_or;
> - io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
> - if (final)
> - final(entry);
> -}
> -
> static void io_apic_modify_irq(struct mp_chip_data *data,
> int mask_and, int mask_or,
> void (*final)(struct irq_pin_list *entry))
> {
> + union entry_union eu;
> struct irq_pin_list *entry;
>
> - for_each_irq_pin(entry, data->irq_2_pin)
> - __io_apic_modify_irq(entry, mask_and, mask_or, final);
> + eu.entry = data->entry;
> + eu.w1 &= mask_and;
> + eu.w1 |= mask_or;
> + data->entry = eu.entry;
> +
> + for_each_irq_pin(entry, data->irq_2_pin) {
> + io_apic_write(entry->apic, 0x10 + 2 * entry->pin, eu.w1);
> + if (final)
> + final(entry);
> + }
> }
>
> static void io_apic_sync(struct irq_pin_list *entry)
> @@ -1729,28 +1712,6 @@ static unsigned int startup_ioapic_irq(struct irq_data *data)
> return was_pending;
> }
>
> -static void __target_IO_APIC_irq(unsigned int irq, struct irq_cfg *cfg,
> - struct mp_chip_data *data)
> -{
> - int apic, pin;
> - struct irq_pin_list *entry;
> - u8 vector = cfg->vector;
> - unsigned int dest = SET_APIC_LOGICAL_ID(cfg->dest_apicid);
> -
> - for_each_irq_pin(entry, data->irq_2_pin) {
> - unsigned int reg;
> -
> - apic = entry->apic;
> - pin = entry->pin;
> -
> - io_apic_write(apic, 0x11 + pin*2, dest);
> - reg = io_apic_read(apic, 0x10 + pin*2);
> - reg &= ~IO_APIC_REDIR_VECTOR_MASK;
> - reg |= vector;
> - io_apic_modify(apic, 0x10 + pin*2, reg);
> - }
> -}
> -
> atomic_t irq_mis_count;
>
> #ifdef CONFIG_GENERIC_PENDING_IRQ
> @@ -1916,6 +1877,7 @@ static int ioapic_set_affinity(struct irq_data *irq_data,
> {
> struct irq_data *parent = irq_data->parent_data;
> struct mp_chip_data *data = irq_data->chip_data;
> + struct irq_pin_list *entry;
> struct irq_cfg *cfg;
> unsigned long flags;
> int ret;
> @@ -1926,7 +1888,9 @@ static int ioapic_set_affinity(struct irq_data *irq_data,
> cfg = irqd_cfg(irq_data);
> data->entry.dest = SET_APIC_LOGICAL_ID(cfg->dest_apicid);
> data->entry.vector = cfg->vector;
> - __target_IO_APIC_irq(irq_data->irq, cfg, irq_data->chip_data);
> + for_each_irq_pin(entry, data->irq_2_pin)
> + __ioapic_write_entry(entry->apic, entry->pin,
> + data->entry);
> }
So let me hold down what tglx and I have been staring at a whole day
today. This commit breaks booting my AMD laptop with the error messages
below. The machine ends up in the emergency shell, completely unusable.
When I revert the commit, x86/apic boots fine again. Btw, I was able to
reproduce the same issue in a kvm guest so something's definitely wrong.
If I revert only the last hunk and do
__target_IO_APIC_irq(irq_data->irq, cfg, irq_data->chip_data);
instead and leave the loop over the irq pins in that function as the old
icode did t, the problem disappears.
I've been trying different things but nothing helped so far as to
pinpoint where the problem lies. Thus this mail to hold down the current
situation. More staring later, on a clear head.
[ 3.465391] PM: Checking hibernation image partition /dev/sda2
[ 3.497559] PM: Hibernation image partition 8:2 present
[ 3.501859] PM: Looking for hibernation image.
[ 6.600378] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 6.608098] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 6.614747] usb 1-1: Product: QEMU USB Tablet
[ 6.617966] usb 1-1: Manufacturer: QEMU
[ 6.632779] usb 1-1: SerialNumber: 42
[ 7.648783] ata2.00: qc timeout (cmd 0xa0)
[ 7.655222] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 7.818934] ata2.01: NODEV after polling detection
[ 7.849882] ata2.00: configured for MWDMA2
[ 8.585096] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[ 8.598044] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 12.852654] ata2.00: qc timeout (cmd 0xa0)
[ 12.855798] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 12.859555] ata2.00: limiting speed to MWDMA2:PIO3
[ 13.017632] ata2.01: NODEV after polling detection
[ 13.024501] ata2.00: configured for MWDMA2
[ 18.028681] ata2.00: qc timeout (cmd 0xa0)
[ 18.035697] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 18.042919] ata2.00: disabled
[ 18.045671] ata2: soft resetting link
[ 18.206824] ata2.01: NODEV after polling detection
[ 18.211174] ata2: EH complete
[ 32.873120] ata1: lost interrupt (Status 0x50)
[ 32.881800] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 32.886772] ata1.00: failed command: READ DMA
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists