| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5477DE90.5090500@linux.intel.com>
Date: Fri, 28 Nov 2014 10:31:44 +0800
From: Jiang Liu <jiang.liu@...ux.intel.com>
To: Borislav Petkov <bp@...en8.de>,
tip-bot for Jiang Liu <tipbot@...or.com>
CC: linux-tip-commits@...r.kernel.org, mingo@...nel.org,
rdunlap@...radead.org, bhelgaas@...gle.com, hpa@...or.com,
tony.luck@...el.com, rjw@...ysocki.net, grant.likely@...aro.org,
konrad.wilk@...cle.com, gregkh@...uxfoundation.org,
tglx@...utronix.de, yinghai@...nel.org, joro@...tes.org,
linux-kernel@...r.kernel.org, benh@...nel.crashing.org,
jroedel@...e.de
Subject: Re: [tip:x86/apic] x86, irq: Use cached IOAPIC entry instead of reading
from hardware
On 2014/11/28 3:32, Borislav Petkov wrote:
> On Wed, Nov 26, 2014 at 03:20:08PM -0800, tip-bot for Jiang Liu wrote:
>> Commit-ID: fda7c08b1349cc4c65f8a5240b10f7e9938604b8
>> Gitweb: http://git.kernel.org/tip/fda7c08b1349cc4c65f8a5240b10f7e9938604b8
>> Author: Jiang Liu <jiang.liu@...ux.intel.com>
>> AuthorDate: Tue, 25 Nov 2014 15:49:53 +0800
>> Committer: Thomas Gleixner <tglx@...utronix.de>
>> CommitDate: Wed, 26 Nov 2014 23:52:49 +0100
>>
>> x86, irq: Use cached IOAPIC entry instead of reading from hardware
>>
>> Use cached IOAPIC entry instead of reading data from IOAPIC hardware
>> registers to improve performance.
>>
>> Signed-off-by: Jiang Liu <jiang.liu@...ux.intel.com>
<snit>
>> @@ -1729,28 +1712,6 @@ static unsigned int startup_ioapic_irq(struct irq_data *data)
>> return was_pending;
>> }
>>
>> -static void __target_IO_APIC_irq(unsigned int irq, struct irq_cfg *cfg,
>> - struct mp_chip_data *data)
>> -{
>> - int apic, pin;
>> - struct irq_pin_list *entry;
>> - u8 vector = cfg->vector;
>> - unsigned int dest = SET_APIC_LOGICAL_ID(cfg->dest_apicid);
>> -
>> - for_each_irq_pin(entry, data->irq_2_pin) {
>> - unsigned int reg;
>> -
>> - apic = entry->apic;
>> - pin = entry->pin;
>> -
>> - io_apic_write(apic, 0x11 + pin*2, dest);
>> - reg = io_apic_read(apic, 0x10 + pin*2);
>> - reg &= ~IO_APIC_REDIR_VECTOR_MASK;
>> - reg |= vector;
>> - io_apic_modify(apic, 0x10 + pin*2, reg);
>> - }
>> -}
>> -
>> atomic_t irq_mis_count;
>>
>> #ifdef CONFIG_GENERIC_PENDING_IRQ
>> @@ -1916,6 +1877,7 @@ static int ioapic_set_affinity(struct irq_data *irq_data,
>> {
>> struct irq_data *parent = irq_data->parent_data;
>> struct mp_chip_data *data = irq_data->chip_data;
>> + struct irq_pin_list *entry;
>> struct irq_cfg *cfg;
>> unsigned long flags;
>> int ret;
>> @@ -1926,7 +1888,9 @@ static int ioapic_set_affinity(struct irq_data *irq_data,
>> cfg = irqd_cfg(irq_data);
>> data->entry.dest = SET_APIC_LOGICAL_ID(cfg->dest_apicid);
>> data->entry.vector = cfg->vector;
>> - __target_IO_APIC_irq(irq_data->irq, cfg, irq_data->chip_data);
>> + for_each_irq_pin(entry, data->irq_2_pin)
>> + __ioapic_write_entry(entry->apic, entry->pin,
>> + data->entry);
>> }
>
> So let me hold down what tglx and I have been staring at a whole day
> today. This commit breaks booting my AMD laptop with the error messages
> below. The machine ends up in the emergency shell, completely unusable.
>
> When I revert the commit, x86/apic boots fine again. Btw, I was able to
> reproduce the same issue in a kvm guest so something's definitely wrong.
>
> If I revert only the last hunk and do
>
> __target_IO_APIC_irq(irq_data->irq, cfg, irq_data->chip_data);
>
> instead and leave the loop over the irq pins in that function as the old
> icode did t, the problem disappears.
Hi Borislav,
Thanks for tracking down to this line of change. I have no
platform to reproduce this bug, so could you please help to revert this
commit and apply following patch to get some data about IOAPIC entry?
Thanks!
Gerry
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index a915ee005148..cfada57140bd 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1736,7 +1736,9 @@ static void __target_IO_APIC_irq(unsigned int irq,
struct irq_cfg *cfg,
struct irq_pin_list *entry;
u8 vector = cfg->vector;
unsigned int dest = SET_APIC_LOGICAL_ID(cfg->dest_apicid);
+ union entry_union eu;
+ eu.entry = data->entry;
for_each_irq_pin(entry, data->irq_2_pin) {
unsigned int reg;
@@ -1748,6 +1750,7 @@ static void __target_IO_APIC_irq(unsigned int irq,
struct irq_cfg *cfg,
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
reg |= vector;
io_apic_modify(apic, 0x10 + pin*2, reg);
+ pr_warn("ioapic%d pin%d, hardware reg %x, cached data
%x\n", apic, pin, reg, eu.w1);
}
}
>
> I've been trying different things but nothing helped so far as to
> pinpoint where the problem lies. Thus this mail to hold down the current
> situation. More staring later, on a clear head.
>
> [ 3.465391] PM: Checking hibernation image partition /dev/sda2
> [ 3.497559] PM: Hibernation image partition 8:2 present
> [ 3.501859] PM: Looking for hibernation image.
> [ 6.600378] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
> [ 6.608098] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
> [ 6.614747] usb 1-1: Product: QEMU USB Tablet
> [ 6.617966] usb 1-1: Manufacturer: QEMU
> [ 6.632779] usb 1-1: SerialNumber: 42
> [ 7.648783] ata2.00: qc timeout (cmd 0xa0)
> [ 7.655222] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
> [ 7.818934] ata2.01: NODEV after polling detection
> [ 7.849882] ata2.00: configured for MWDMA2
> [ 8.585096] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
> [ 8.598044] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
> [ 12.852654] ata2.00: qc timeout (cmd 0xa0)
> [ 12.855798] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
> [ 12.859555] ata2.00: limiting speed to MWDMA2:PIO3
> [ 13.017632] ata2.01: NODEV after polling detection
> [ 13.024501] ata2.00: configured for MWDMA2
> [ 18.028681] ata2.00: qc timeout (cmd 0xa0)
> [ 18.035697] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
> [ 18.042919] ata2.00: disabled
> [ 18.045671] ata2: soft resetting link
> [ 18.206824] ata2.01: NODEV after polling detection
> [ 18.211174] ata2: EH complete
> [ 32.873120] ata1: lost interrupt (Status 0x50)
> [ 32.881800] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 32.886772] ata1.00: failed command: READ DMA
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists