| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BLU436-SMTP26EFE4C56ADB4FB217BA7EE97B0@phx.gbl>
Date: Wed, 3 Dec 2014 13:53:18 +0000
From: Sean Cleator <seancleator@...mail.co.uk>
To: gregkh@...uxfoundation.org
CC: Lior Dotan <liodot@...il.com>,
Christopher Harrer <charrer@...critech.com>,
David Matlack <matlackdavid@...il.com>,
Monam Agarwal <monamagarwal123@...il.com>,
"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>,
Joe Perches <joe@...ches.com>,
Sean Cleator <seancleator@...mail.co.uk>,
Vincent Heuken <me@...centheuken.com>,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCH] Staging: slicoss: Fix long line issues in slicoss.c
A patch to the slicoss.c file to fix some of the long line issues found by the
checkpath.pl tool
Signed-off-by: Sean Cleator <seancleator@...mail.co.uk>
---
drivers/staging/slicoss/slicoss.c | 39 ++++++++++++++++++++++++++-------------
1 file changed, 26 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 56ca3b6..4df4a7e 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -498,12 +498,14 @@ static int slic_card_download(struct adapter *adapter)
slic_reg32_write(&slic_regs->slic_wcs,
baseaddress + codeaddr, FLUSH);
/* Write out instruction to low addr */
- slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wcs,
+ instruction, FLUSH);
instruction = *(u32 *)(fw->data + index);
index += 4;
/* Write out instruction to high addr */
- slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
+ slic_reg32_write(&slic_regs->slic_wcs,
+ instruction, FLUSH);
instruction = *(u32 *)(fw->data + index);
index += 4;
}
@@ -1533,14 +1535,18 @@ retry_rcvqfill:
dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
__func__);
dev_err(dev, "skb[%p] PROBLEM\n", skb);
- dev_err(dev, " skbdata[%p]\n", skb->data);
+ dev_err(dev, " skbdata[%p]\n",
+ skb->data);
dev_err(dev, " skblen[%x]\n", skb->len);
dev_err(dev, " paddr[%p]\n", paddr);
dev_err(dev, " paddrl[%x]\n", paddrl);
dev_err(dev, " paddrh[%x]\n", paddrh);
- dev_err(dev, " rcvq->head[%p]\n", rcvq->head);
- dev_err(dev, " rcvq->tail[%p]\n", rcvq->tail);
- dev_err(dev, " rcvq->count[%x]\n", rcvq->count);
+ dev_err(dev, " rcvq->head[%p]\n",
+ rcvq->head);
+ dev_err(dev, " rcvq->tail[%p]\n",
+ rcvq->tail);
+ dev_err(dev, " rcvq->count[%x]\n",
+ rcvq->count);
dev_err(dev, "SKIP THIS SKB!!!!!!!!\n");
goto retry_rcvqfill;
}
@@ -1549,14 +1555,18 @@ retry_rcvqfill:
dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
__func__);
dev_err(dev, "skb[%p] PROBLEM\n", skb);
- dev_err(dev, " skbdata[%p]\n", skb->data);
+ dev_err(dev, " skbdata[%p]\n",
+ skb->data);
dev_err(dev, " skblen[%x]\n", skb->len);
dev_err(dev, " paddr[%p]\n", paddr);
dev_err(dev, " paddrl[%x]\n", paddrl);
dev_err(dev, " paddrh[%x]\n", paddrh);
- dev_err(dev, " rcvq->head[%p]\n", rcvq->head);
- dev_err(dev, " rcvq->tail[%p]\n", rcvq->tail);
- dev_err(dev, " rcvq->count[%x]\n", rcvq->count);
+ dev_err(dev, " rcvq->head[%p]\n",
+ rcvq->head);
+ dev_err(dev, " rcvq->tail[%p]\n",
+ rcvq->tail);
+ dev_err(dev, " rcvq->count[%x]\n",
+ rcvq->count);
dev_err(dev, "GIVE TO CARD ANYWAY\n");
}
#endif
@@ -1885,7 +1895,8 @@ static void slic_xmit_fail(struct adapter *adapter,
break;
case XMIT_FAIL_HOSTCMD_FAIL:
dev_err(&adapter->netdev->dev,
- "xmit_start skb[%p] type[%x] No host commands available\n", skb, skb->pkt_type);
+ "xmit_start skb[%p] type[%x] No host commands available\n",
+ skb, skb->pkt_type);
break;
}
}
@@ -2097,7 +2108,8 @@ static void slic_interrupt_card_up(u32 isr, struct adapter *adapter,
}
} else if (isr & ISR_XDROP) {
dev_err(&dev->dev,
- "isr & ISR_ERR [%x] ISR_XDROP\n", isr);
+ "isr & ISR_ERR [%x] ISR_XDROP\n",
+ isr);
} else {
dev_err(&dev->dev,
"isr & ISR_ERR [%x]\n",
@@ -2341,7 +2353,8 @@ static int slic_if_init(struct adapter *adapter)
SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
#else
slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
- slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr, FLUSH);
+ slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr,
+ FLUSH);
#endif
spin_unlock_irqrestore(&adapter->bit64reglock.lock,
adapter->bit64reglock.flags);
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists