| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 5 Dec 2014 18:07:44 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Vinod Koul <vinod.koul@...el.com>
Cc: dmaengine@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Antoine Ténart <antoine@...e-electrons.com>,
Russell King <linux@....linux.org.uk>, lars@...afoo.de
Subject: Re: [PATCH v5 34/61] dmaengine: omap: Split device_control
On Fri, Dec 05, 2014 at 08:26:42PM +0530, Vinod Koul wrote:
> On Fri, Dec 05, 2014 at 03:33:59PM +0100, Maxime Ripard wrote:
> > Hi Vinod,
> >
> > On Fri, Dec 05, 2014 at 07:57:02PM +0530, Vinod Koul wrote:
> > > On Mon, Nov 17, 2014 at 02:42:28PM +0100, Maxime Ripard wrote:
> > > > Split the device_control callback of the TI OMAP DMA driver to make use
> > > > of the newly introduced callbacks, that will eventually be used to retrieve
> > > > slave capabilities.
> > > >
> > > > Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
> > > > ---
> > > > drivers/dma/omap-dma.c | 51 +++++++++++++++-----------------------------------
> > > > 1 file changed, 15 insertions(+), 36 deletions(-)
> > > >
> > > > diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
> > > > index a8aa5b6bb5e2..1cadf812f3b3 100644
> > > > --- a/drivers/dma/omap-dma.c
> > > > +++ b/drivers/dma/omap-dma.c
> > > > @@ -948,8 +948,10 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
> > > > return vchan_tx_prep(&c->vc, &d->vd, flags);
> > > > }
> > > >
> > > > -static int omap_dma_slave_config(struct omap_chan *c, struct dma_slave_config *cfg)
> > > > +static int omap_dma_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
> > > > {
> > > > + struct omap_chan *c = to_omap_dma_chan(chan);
> > > > +
> > > > if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
> > > > cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
> > > > return -EINVAL;
> > > > @@ -959,8 +961,9 @@ static int omap_dma_slave_config(struct omap_chan *c, struct dma_slave_config *c
> > > > return 0;
> > > > }
> > > >
> > > > -static int omap_dma_terminate_all(struct omap_chan *c)
> > > > +static int omap_dma_terminate_all(struct dma_chan *chan)
> > > > {
> > > > + struct omap_chan *c = to_omap_dma_chan(chan);
> > > > struct omap_dmadev *d = to_omap_dma_dev(c->vc.chan.device);
> > > > unsigned long flags;
> > > > LIST_HEAD(head);
> > > > @@ -996,8 +999,10 @@ static int omap_dma_terminate_all(struct omap_chan *c)
> > > > return 0;
> > > > }
> > > >
> > > > -static int omap_dma_pause(struct omap_chan *c)
> > > > +static int omap_dma_pause(struct dma_chan *chan)
> > > > {
> > > > + struct omap_chan *c = to_omap_dma_chan(chan);
> > > > +
> > > > /* Pause/Resume only allowed with cyclic mode */
> > > > if (!c->cyclic)
> > > > return -EINVAL;
> > > > @@ -1010,8 +1015,10 @@ static int omap_dma_pause(struct omap_chan *c)
> > > > return 0;
> > > > }
> > > >
> > > > -static int omap_dma_resume(struct omap_chan *c)
> > > > +static int omap_dma_resume(struct dma_chan *chan)
> > > > {
> > > > + struct omap_chan *c = to_omap_dma_chan(chan);
> > > > +
> > > > /* Pause/Resume only allowed with cyclic mode */
> > > > if (!c->cyclic)
> > > > return -EINVAL;
> > > > @@ -1029,37 +1036,6 @@ static int omap_dma_resume(struct omap_chan *c)
> > > > return 0;
> > > > }
> > > >
> > > > -static int omap_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> > > > - unsigned long arg)
> > > > -{
> > > > - struct omap_chan *c = to_omap_dma_chan(chan);
> > > > - int ret;
> > > > -
> > > > - switch (cmd) {
> > > > - case DMA_SLAVE_CONFIG:
> > > > - ret = omap_dma_slave_config(c, (struct dma_slave_config *)arg);
> > > > - break;
> > > > -
> > > > - case DMA_TERMINATE_ALL:
> > > > - ret = omap_dma_terminate_all(c);
> > > > - break;
> > > > -
> > > > - case DMA_PAUSE:
> > > > - ret = omap_dma_pause(c);
> > > > - break;
> > > > -
> > > > - case DMA_RESUME:
> > > > - ret = omap_dma_resume(c);
> > > > - break;
> > > > -
> > > > - default:
> > > > - ret = -ENXIO;
> > > > - break;
> > > > - }
> > > > -
> > > > - return ret;
> > > > -}
> > > > -
> > > > static int omap_dma_chan_init(struct omap_dmadev *od, int dma_sig)
> > > > {
> > > > struct omap_chan *c;
> > > > @@ -1136,7 +1112,10 @@ static int omap_dma_probe(struct platform_device *pdev)
> > > > od->ddev.device_issue_pending = omap_dma_issue_pending;
> > > > od->ddev.device_prep_slave_sg = omap_dma_prep_slave_sg;
> > > > od->ddev.device_prep_dma_cyclic = omap_dma_prep_dma_cyclic;
> > > > - od->ddev.device_control = omap_dma_control;
> > > this should be assigned to omap_dma_slave_config. omap_dma_control is not
> > > here :(
> >
> > I'm not sure what you mean here. I'm removing this line, together with
> > the whole omap_dma_control function.
> Sorry wrong quote and not good explanations. the lines i quoted is
> wrong one...
>
> - od->ddev.device_control = omap_dma_control;
> + od->ddev.device_config = omap_dma_config;
> this is troubling line here...
>
> we dont have omap_dma_config. It should be omap_dma_slave_config instead
Ah, right.
I have no idea why it haven't been picked up by intel's build bot
thuough.
Anyway. Do you want me to send a new version of these patches for this
trivial fix and the mxs one, or do you want me to send a follow-up?
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists