[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <faa94cfe2de1047de096b51c780f6e408aced2fb.1418131298.git.cyrille.pitchen@atmel.com>
Date: Tue, 9 Dec 2014 14:31:36 +0100
From: Cyrille Pitchen <cyrille.pitchen@...el.com>
To: <nicolas.ferre@...el.com>, <gregkh@...uxfoundation.org>,
<wenyou.yang@...el.com>, <ludovic.desroches@...el.com>,
<leilei.zhao@...el.com>, <voice.shen@...el.com>,
<josh.wu@...el.com>, <linux-serial@...r.kernel.org>
CC: <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [PATCH 5/5] tty/serial: at91: fix typo and indentation
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@...el.com>
---
drivers/tty/serial/atmel_serial.c | 40 +++++++++++++++++++++------------------
1 file changed, 22 insertions(+), 18 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 9e0c636..846552b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -738,7 +738,11 @@ static void atmel_complete_tx_dma(void *arg)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- /* Do we really need this? */
+ /*
+ * xmit is a circular buffer so, if we have just send data from
+ * xmit->tail to the end of xmit->buf, now we have to transmit the
+ * remaining data from the beginning of xmit->buf to xmit->head.
+ */
if (!uart_circ_empty(xmit))
tasklet_schedule(&atmel_port->tasklet);
@@ -797,11 +801,11 @@ static void atmel_tx_dma(struct uart_port *port)
BUG_ON(!sg_dma_len(sg));
desc = dmaengine_prep_slave_sg(chan,
- sg,
- 1,
- DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT |
- DMA_CTRL_ACK);
+ sg,
+ 1,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
if (!desc) {
dev_err(port->dev, "Failed to send via dma!\n");
return;
@@ -1025,13 +1029,13 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
/* UART circular rx buffer is an aligned page. */
BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
sg_set_page(&atmel_port->sg_rx,
- virt_to_page(ring->buf),
- ATMEL_SERIAL_RINGSIZE,
- (int)ring->buf & ~PAGE_MASK);
- nent = dma_map_sg(port->dev,
- &atmel_port->sg_rx,
- 1,
- DMA_FROM_DEVICE);
+ virt_to_page(ring->buf),
+ ATMEL_SERIAL_RINGSIZE,
+ (int)ring->buf & ~PAGE_MASK);
+ nent = dma_map_sg(port->dev,
+ &atmel_port->sg_rx,
+ 1,
+ DMA_FROM_DEVICE);
if (!nent) {
dev_dbg(port->dev, "need to release resource of dma\n");
@@ -1060,11 +1064,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
* each one is half ring buffer size
*/
desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx,
- sg_dma_address(&atmel_port->sg_rx),
- sg_dma_len(&atmel_port->sg_rx),
- sg_dma_len(&atmel_port->sg_rx)/2,
- DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT);
+ sg_dma_address(&atmel_port->sg_rx),
+ sg_dma_len(&atmel_port->sg_rx),
+ sg_dma_len(&atmel_port->sg_rx)/2,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
desc->callback = atmel_complete_rx_dma;
desc->callback_param = port;
atmel_port->desc_rx = desc;
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists