Message-ID: <20141216192609.778f5f8d@bbrezillon>
Date:	Tue, 16 Dec 2014 19:26:09 +0100
From:	Boris Brezillon <boris.brezillon@...e-electrons.com>
To:	Thomas Gleixner <tglx@...utronix.de>
Cc:	"Rafael J. Wysocki" <rjw@...ysocki.net>,
	"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jslaby@...e.cz>, linux-serial@...r.kernel.org,
	Alessandro Zummo <a.zummo@...ertech.it>,
	rtc-linux@...glegroups.com, Mike Turquette <mturquette@...aro.org>,
	Nicolas Ferre <nicolas.ferre@...el.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	Andrew Victor <linux@...im.org.za>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/5] ARM: at91: fix irq_pm_install_action WARNING

Hi Thomas,

On Tue, 16 Dec 2014 11:03:55 +0100 (CET)
Thomas Gleixner <tglx@...utronix.de> wrote:

> On Tue, 16 Dec 2014, Boris Brezillon wrote:
> > On Mon, 15 Dec 2014 23:48:14 +0100
> > "Rafael J. Wysocki" <rjw@...ysocki.net> wrote:
> > > Or even set IRFQ_NO_SUSPEND for all of the users of this interrupt and add
> > > comments to them explaining why it is set.
> > Actually I thought about adding a new flag (let's call it
> > IRQF_DONT_COMPLAIN for now ;-)) to remove those warnings (or specifying
> > IRFQ_NO_SUSPEND in all peripherals sharing the IRQ with the init
> > timer), but after discussing the problem with Thomas I decided to go
> > for the approach described in my cover letter.
> > 
> > Thomas, correct me if I'm wrong, but your concern about the
> > IRQF_DONT_COMPLAIN approach was that it was leaving interrupt handlers
> > of suspended devices in an active state (meaning that they could be
> > called in "suspend" or "early resume" state), and such devices might
> > not properly handle interrupts while being in a suspended state (clocks
> > and regulators disabled).
> > In at91 specific case this should not be an issue thought.
> > 
> > We have the same problem when setting IRFQ_NO_SUSPEND on all peripherals
> > sharing the IRQ with the init timer.
> > Moreover, I'd like to keep the core automatically disabling the IRQ when
> > the PMC, RTC, watchdog or DBGU (UART) peripherals have their own
> > dedicated IRQ (which is the case on Atmel sama5 SoCs).
> > This implies testing for the SoC version in each of these drivers and
> > adapting the request_irq call accordingly.
> 
> But still all those drivers must disable the interrupts at the device
> level on suspend, right?
> 
> > Thomas, Rafael, if both of you think I should either introduce a new
> > flag or specify IRFQ_NO_SUSPEND in all shared IRQ users, then I can go
> > for one of this solution.
> 
> All of this really sucks. What about the following?
> 
> Install the timer interrupt as a demultiplexing interrupt.
> 
> Create a pseudo interrupt chip, which essentially does nothing, but
> keeps track of the disabled state. Install handle_simple_irq as
> handler for those "demux" interrupts. Then have:
> 
> struct data {
>        u32 unmasked;
>        u32 demuxavail;
> };
> 
> static struct data demuxdata;
> 
> At init time you know how many of these demux interrupts are
> available. So you set the demuxdata up, e.g. for 3 interrupts
> connected:
> 
> 	demuxdata.demuxavail = 0x07;
> 
> You install a pointer to demuxdata for all demux interrupts as irq
> chip data and the simple handler.
> 
> And in the mask/unmask handlers you do:
> 
> mask(irqdata) {
>        struct data *d = irq_data_get_irq_chip_data(irqdata);
> 
>        d->unmasked &= ~irqdata->mask;
>        if (!d->unmasked)
>        	  mask_demux_irq();
> }
> 
> unmask(irqdata) {
>        struct data *d = irq_data_get_irq_chip_data(irqdata);
> 
>        if (!d->unmasked)
>        	  unmask_demux_irq();
>        d->mask |= irqdata->mask;
> }
> 
> Now the demuxhandler does:
> 
>     mask = demuxdata.demuxavail & demuxdata.unmasked;
> 
>     for_each_bit(bit, mask)
>     	generic_handle_irq(demuxirq_start + bit);
> 
> So the handler wont be invoked for masked bits and handle_simple_irq()
> will not call the device handler if the interrupt is marked disabled.
> 
> So in the suspend case all "demux" interrupts except those which are
> marked NOSUSPEND are marked disabled and the handlers wont be invoked.
> 
> Locking and other details omitted.
> 
> That avoids the whole flag, action, whatever business for the price of
> a really trivial demux mechanism. Everything just works. Even the irq
> storm detector will just disable the parent interrupt once all
> handlers return NONE often enough.

Still have one question regarding the spurious interrupt detection code.
AFAIU, it disables a specific IRQ handler if it triggers to often with
an IRQ_NONE return, right ?

In this dumb demuxer I can't tell which child interrupt should be
handled (there is no interrupt cause register), thus I call
generic_handle_irq on all unmasked IRQs.
Isn't there a risk to get some of my child interrupts disabled because
they always return IRQ_NONE (which is a normal use case for
IRQF_SHARED: we're only expecting at least one handler to return
IRQ_HANDLED or IRQ_WAKE_THREAD, not all of them) ?


-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists