[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <1419584751-18149-3-git-send-email-flora.fu@mediatek.com>
Date: Fri, 26 Dec 2014 17:05:50 +0800
From: Flora Fu <flora.fu@...iatek.com>
To: Philipp Zabel <p.zabel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>
CC: Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
Grant Likely <grant.likely@...aro.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<srv_heupstream@...iatek.com>,
Sascha Hauer <kernel@...gutronix.de>,
Olof Johansson <olof@...om.net>, Arnd Bergmann <arnd@...db.de>,
Flora Fu <flora.fu@...iatek.com>,
Eddie Huang <eddie.huang@...iatek.com>,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
Dongdong Cheng <dongdong.cheng@...iatek.com>,
HenryC Chen <henryc.chen@...iatek.com>,
Menghui Lin <menghui.lin@...iatek.com>,
Chen Zhong <chen.zhong@...iatek.com>
Subject: [PATCH v4 2/3] dt-bindings: Add Reset Controller for MediaTek SoC
Add device tree bindings.
Acked-by: Philipp Zabel <p.zabel@...gutronix.de>
Signed-off-by: Flora Fu <flora.fu@...iatek.com>
---
.../devicetree/bindings/reset/mediatek,reset.txt | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt
diff --git a/Documentation/devicetree/bindings/reset/mediatek,reset.txt b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
new file mode 100644
index 0000000..647b401
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
@@ -0,0 +1,52 @@
+MediaTek SoC Reset Controller
+======================================
+The reset controller driver accesses registers through the syscon regmap. It
+is a child node of syscon.
+
+Required properties:
+- compatible : "mediatek,reset"
+- #reset-cells: 1
+- reg: The register region can be accessed from syscon. The first parameter is
+ reset base address offset. The second parameter is byte width of reset registers.
+
+example:
+infracfg: syscon@...01000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mediatek,mt8135-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+
+ infrarst: reset-controller@30 {
+ #reset-cells = <1>;
+ compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
+ reg = <0x30 0x8>;
+ };
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The reset controller(mtk-reset) manages various reset sources. Those device nodes should
+specify the reset line on the rstc in their resets property, containing a phandle to the
+rstc device node and a RESET_INDEX specifying which module to reset, as described in
+reset.txt.
+
+For MediaTek SoC, RESET_INDEX is reset bit defined in INFRACFG or PERICFG registers.
+
+example:
+pwrap: pwrap@...0f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap-base",
+ "pwrap-bridge-base";
+ resets = <&infrarst MT8135_INFRA_PMIC_WRAP_RST>,
+ <&perirst MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "infrarst", "perirst";
+};
+
+Definitions for the supported resets by IC:
+MT8135:
+include/dt-bindings/reset-controller/mt8135-resets.h
+MT8173:
+include/dt-bindings/reset-controller/mt8173-resets.h
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists