[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20141230224621.GA26163@amd>
Date: Tue, 30 Dec 2014 23:46:22 +0100
From: Pavel Machek <pavel@....cz>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Nishanth Menon <nm@...com>, Grazvydas Ignotas <notasas@...il.com>,
Sebastian Reichel <sre@...nel.org>,
Mark Rutland <mark.rutland@....com>,
dt list <devicetree@...r.kernel.org>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Tony Lindgren <tony@...mide.com>,
Kumar Gala <galak@...eaurora.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
lm-sensors@...sensors.org, Rob Herring <robh+dt@...nel.org>,
Jean Delvare <jdelvare@...e.de>,
BenoƮt Cousson <bcousson@...libre.com>,
Pali Rohar <pali.rohar@...il.com>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, eduardo.valentin@...com
Subject: Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
On Mon 2014-12-29 11:04:48, Guenter Roeck wrote:
> On Mon, Dec 29, 2014 at 07:15:56PM +0100, Pavel Machek wrote:
> > On Mon 2014-12-29 12:01:03, Nishanth Menon wrote:
> > > On Mon, Dec 29, 2014 at 11:52 AM, Grazvydas Ignotas <notasas@...il.com> wrote:
> > > > On Fri, Dec 26, 2014 at 2:34 PM, Sebastian Reichel <sre@...nel.org> wrote:
> > > >> OMAP34xx and OMAP36xx processors contain a register in the syscon area,
> > > >> which can be used to determine the SoCs temperature. This patch provides
> > > >> a DT based driver for the temperature sensor based on an older driver
> > > >> written by Peter De Schrijver for the Nokia N900 and N9.
> > > >
> > > > The sensor looks like an earlier iteration of sensors used in newer
> > > > OMAPs, which are already supported by maybe
> > > > drivers/thermal/ti-soc-thermal/ , maybe it would make sense to update
> > > > that driver instead?
> > >
> > > Just to be clear - OMAP4 is the first time that the sensors were
> > > reliable enough to be used.
> >
> > When testing initial version of the patch, they seem to work very well
> > in the omap3 case.
> >
> Pavel,
>
> can you look into the omap4 thermal driver to see if it can be used ?
The hardware registers are named the same way...
Unfortunately, TI moves registers around with each release, and OMAP4
stuff is _way_ more complex and maze of ifdefs, too.
static struct temp_sensor_data omap4430_mpu_temp_sensor_data = {
.min_freq = OMAP4430_MIN_FREQ,
.max_freq = OMAP4430_MAX_FREQ,
.max_temp = OMAP4430_MAX_TEMP,
.min_temp = OMAP4430_MIN_TEMP,
.hyst_val = OMAP4430_HYST_VAL,
};
and each define used just once. Would be easier to read and modify if
the ifdefs were removed...
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists