| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 1 Jan 2015 10:11:32 +0100
From: Pavel Machek <pavel@....cz>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Nishanth Menon <nm@...com>, Grazvydas Ignotas <notasas@...il.com>,
Sebastian Reichel <sre@...nel.org>,
Mark Rutland <mark.rutland@....com>,
dt list <devicetree@...r.kernel.org>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Tony Lindgren <tony@...mide.com>,
Kumar Gala <galak@...eaurora.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
lm-sensors@...sensors.org, Rob Herring <robh+dt@...nel.org>,
Jean Delvare <jdelvare@...e.de>,
Benoît Cousson <bcousson@...libre.com>,
Pali Rohar <pali.rohar@...il.com>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 2/3] hwmon: Driver for OMAP3 temperature sensor
On Mon 2014-12-29 11:04:48, Guenter Roeck wrote:
> On Mon, Dec 29, 2014 at 07:15:56PM +0100, Pavel Machek wrote:
> > On Mon 2014-12-29 12:01:03, Nishanth Menon wrote:
> > > On Mon, Dec 29, 2014 at 11:52 AM, Grazvydas Ignotas <notasas@...il.com> wrote:
> > > > On Fri, Dec 26, 2014 at 2:34 PM, Sebastian Reichel <sre@...nel.org> wrote:
> > > >> OMAP34xx and OMAP36xx processors contain a register in the syscon area,
> > > >> which can be used to determine the SoCs temperature. This patch provides
> > > >> a DT based driver for the temperature sensor based on an older driver
> > > >> written by Peter De Schrijver for the Nokia N900 and N9.
> > > >
> > > > The sensor looks like an earlier iteration of sensors used in newer
> > > > OMAPs, which are already supported by maybe
> > > > drivers/thermal/ti-soc-thermal/ , maybe it would make sense to update
> > > > that driver instead?
> > >
> > > Just to be clear - OMAP4 is the first time that the sensors were
> > > reliable enough to be used.
> >
> > When testing initial version of the patch, they seem to work very well
> > in the omap3 case.
> >
> Pavel,
>
> can you look into the omap4 thermal driver to see if it can be used ?
The hardware seems similar, but omap4 has a lot more
features... Here's a test patch. It compiles and boots, but I'm too
far away from my working userland at this moment.
Best regards,
Pavel
commit 116612364f93b165b22166f0043117059eb3118f
Author: Pavel <pavel@....cz>
Date: Wed Dec 31 00:36:40 2014 +0100
Configure ti-soc-thermal to handle n900's thermal sensor.
diff --git a/.config b/.config
index b031e7f..4a79672 100644
--- a/.config
+++ b/.config
@@ -1671,7 +1671,23 @@ CONFIG_SENSORS_TWL4030_MADC=y
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+CONFIG_THERMAL_GOV_STEP_WISE=y
+# CONFIG_THERMAL_GOV_BANG_BANG is not set
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+# CONFIG_CLOCK_THERMAL is not set
+# CONFIG_THERMAL_EMULATION is not set
+
+#
+# Texas Instruments thermal drivers
+#
+CONFIG_TI_SOC_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 55e4928..dcbcaa9 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -29,6 +29,13 @@
};
};
+ bandgap: bandgap {
+ reg = <0x4a002524 0x4>;
+ compatible = "ti,omap34xx-bandgap";
+
+ #thermal-sensor-cells = <0>;
+ };
+
leds {
compatible = "gpio-leds";
heartbeat {
diff --git a/drivers/thermal/ti-soc-thermal/Makefile b/drivers/thermal/ti-soc-thermal/Makefile
index 1226b24..27ff2ed 100644
--- a/drivers/thermal/ti-soc-thermal/Makefile
+++ b/drivers/thermal/ti-soc-thermal/Makefile
@@ -2,5 +2,6 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal.o
ti-soc-thermal-y := ti-bandgap.o
ti-soc-thermal-$(CONFIG_TI_THERMAL) += ti-thermal-common.o
ti-soc-thermal-$(CONFIG_DRA752_THERMAL) += dra752-thermal-data.o
+ti-soc-thermal-y += omap3-thermal-data.o
ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o
ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o
diff --git a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
new file mode 100644
index 0000000..7e25ccd
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
@@ -0,0 +1,94 @@
+/*
+ * OMAP4 thermal driver.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Inc.
+ * Copyright (C) 2014 Pavel Machek <pavel@....cz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
+
+/*
+ * OMAP34XX has one instance of thermal sensor for MPU
+ * need to describe the individual bit fields
+ */
+static struct temp_sensor_registers
+omap34xx_mpu_temp_sensor_registers = {
+ .temp_sensor_ctrl = 0,
+ .bgap_tempsoff_mask = 0, /* Unused, we don't have POWER_SWITCH */
+ .bgap_soc_mask = BIT(8),
+ .bgap_eocz_mask = BIT(7),
+ .bgap_dtemp_mask = 0x7f,
+
+ .bgap_mode_ctrl = 0,
+ .mode_ctrl_mask = 0, /* Unused, no MODE_CONFIG */
+
+ .bgap_efuse = 0,
+};
+
+/* Thresholds and limits for OMAP34XX MPU temperature sensor */
+static struct temp_sensor_data omap34xx_mpu_temp_sensor_data = {
+ .min_freq = 100000,
+ .max_freq = 1000000,
+ .max_temp = -99000,
+ .min_temp = 99000,
+ .hyst_val = 5000,
+};
+
+/*
+ * Temperature values in milli degree celsius
+ * ADC code values from 530 to 923
+ */
+static const int
+omap34xx_adc_to_temp[] = {
+ -38000, -35000, -34000, -32000, -30000, -28000, -26000, -24000, -22000,
+ -20000, -18000, -17000, -15000, -13000, -12000, -10000, -8000, -6000,
+ -5000, -3000, -1000, 0, 2000, 3000, 5000, 6000, 8000, 10000, 12000,
+ 13000, 15000, 17000, 19000, 21000, 23000, 25000, 27000, 28000, 30000,
+ 32000, 33000, 35000, 37000, 38000, 40000, 42000, 43000, 45000, 47000,
+ 48000, 50000, 52000, 53000, 55000, 57000, 58000, 60000, 62000, 64000,
+ 66000, 68000, 70000, 71000, 73000, 75000, 77000, 78000, 80000, 82000,
+ 83000, 85000, 87000, 88000, 90000, 92000, 93000, 95000, 97000, 98000,
+ 100000, 102000, 103000, 105000, 107000, 109000, 111000, 113000, 115000,
+ 117000, 118000, 120000, 122000, 123000,
+};
+
+/* OMAP34XX data */
+const struct ti_bandgap_data omap34xx_data = {
+ .features = TI_BANDGAP_FEATURE_CLK_CTRL,
+ .fclock_name = "ts_fclk",
+ .div_ck_name = "ts_fclk",
+ .conv_table = omap34xx_adc_to_temp,
+ .adc_start_val = 0,
+ .adc_end_val = 127,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
+
+ .sensors = {
+ {
+ .registers = &omap34xx_mpu_temp_sensor_registers,
+ .ts_data = &omap34xx_mpu_temp_sensor_data,
+ .domain = "cpu",
+ .slope = 0,
+ .constant = 20000,
+ .slope_pcb = 0,
+ .constant_pcb = 20000,
+ .register_cooling = NULL,
+ .unregister_cooling = NULL,
+ },
+ },
+ .sensor_count = 1,
+
+ .sensor_count = 0,
+};
+
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 634b6ce..2a72adc 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -856,7 +856,7 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
temp = ti_bandgap_read_temp(bgp, id);
spin_unlock(&bgp->lock);
- ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret)
return -EIO;
@@ -1509,6 +1509,10 @@ static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend,
#endif
static const struct of_device_id of_ti_bandgap_match[] = {
+ {
+ .compatible = "ti,omap34xx-bandgap",
+ .data = (void *)&omap34xx_data,
+ },
#ifdef CONFIG_OMAP4_THERMAL
{
.compatible = "ti,omap4430-bandgap",
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index b3adf72..3f05386 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -384,6 +384,8 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data);
void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id);
int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend);
+extern const struct ti_bandgap_data omap34xx_data;
+
#ifdef CONFIG_OMAP4_THERMAL
extern const struct ti_bandgap_data omap4430_data;
extern const struct ti_bandgap_data omap4460_data;
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists