[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <54AC79E3.1040200@linaro.org>
Date: Wed, 07 Jan 2015 09:12:19 +0900
From: AKASHI Takahiro <takahiro.akashi@...aro.org>
To: "Kumar, Vijaya" <Vijaya.Kumar@...iumnetworks.com>,
Yong Zhao <yong.zhao@....com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>
CC: "dsaxena@...aro.org" <dsaxena@...aro.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linaro-kernel@...ts.linaro.org" <linaro-kernel@...ts.linaro.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: kgdb: fix single stepping
Vijay,
On 01/07/2015 01:37 AM, Kumar, Vijaya wrote:
> Hi Will,
>
> I could not reproduce this issue on my simulator.
> For now if this is validated on any platform, it should be ok.
Let me make sure that you tried the steps that I suggested in:
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-October/297567.html
but still couldn't reproduce this problem?
-Takahiro AKASHI
> Regards
> Vijay
>
> ________________________________________
> From: Yong Zhao <yong.zhao@....com>
> Sent: Tuesday, January 6, 2015 9:52 PM
> To: AKASHI Takahiro; catalin.marinas@....com; will.deacon@....com
> Cc: dsaxena@...aro.org; Kumar, Vijaya; linux-arm-kernel@...ts.infradead.org; linaro-kernel@...ts.linaro.org; linux-kernel@...r.kernel.org
> Subject: Re: [PATCH] arm64: kgdb: fix single stepping
>
> Hi Will,
>
> I have used Takahiro's patch to fix the single stepping problem of KGDB
> on arm64. We had real hardware called AMD Seattle. The problem I had is
> exactly the same as the description of Takahiro. We are working on
> kernel 3.14, but we did port back many patches related to arm64 from
> higher kernel versions. The patches that we ported are:
>
> 1d70460 arm64: kgdb: fix single stepping
> 5f31df7 arm64: debug: don't re-enable debug exceptions on return from
> el1_dbg
> All the arm64 KGDB patches from 3.16
>
> The first one is Takahiro's patch.
>
> Best,
> Yong
> On 15-01-05 06:52 PM, AKASHI Takahiro wrote:
>> Hi Will,
>>
>> What's the current status of this patch?
>> I'm pretty sure that the bug is reproducable and can be fixed
>> with my patch since I've got a report from another guy
>> who had the same problem and tried my patch.
>>
>> Thanks,
>> -Takahiro AKASHI
>>
>> On 10/21/2014 02:07 PM, AKASHI Takahiro wrote:
>>> I tried to verify kgdb in vanilla kernel on fast model, but it seems
>>> that
>>> the single stepping with kgdb doesn't work correctly since its first
>>> appearance at v3.15.
>>>
>>> On v3.15, 'stepi' command after breaking the kernel at some breakpoint
>>> steps forward to the next instruction, but the succeeding 'stepi' never
>>> goes beyond that.
>>> On v3.16, 'stepi' moves forward and stops at the next instruction just
>>> after enable_dbg in el1_dbg, and never goes beyond that. This
>>> variance of
>>> behavior seems to come in with the following patch in v3.16:
>>>
>>> commit 2a2830703a23 ("arm64: debug: avoid accessing mdscr_el1 on
>>> fault
>>> paths where possible")
>>>
>>> This patch
>>> (1) moves kgdb_disable_single_step() from 'c' command handling to single
>>> step handler.
>>> This makes sure that single stepping gets effective at every 's'
>>> command.
>>> Please note that, under the current implementation, single step
>>> bit in
>>> spsr, which is cleared by the first single stepping, will not be
>>> set
>>> again for the consecutive 's' commands because single step bit
>>> in mdscr
>>> is still kept on (that is, kernel_active_single_step() in
>>> kgdb_arch_handle_exception() is true).
>>> (2) re-implements kgdb_roundup_cpus() because the current implementation
>>> enabled interrupts naively. See below.
>>> (3) removes 'enable_dbg' in el1_dbg.
>>> Single step bit in mdscr is turned on in do_handle_exception()->
>>> kgdb_handle_expection() before returning to debugged context,
>>> and if
>>> debug exception is enabled in el1_dbg, we will see unexpected
>>> single-
>>> stepping in el1_dbg.
>>> Since v3.18, the following patch does the same:
>>> commit 1059c6bf8534 ("arm64: debug: don't re-enable debug
>>> exceptions
>>> on return from el1_dbg)
>>> (4) masks interrupts while single-stepping one instruction.
>>> If an interrupt is caught during processing a single-stepping,
>>> debug
>>> exception is unintentionally enabled by el1_irq's 'enable_dbg'
>>> before
>>> returning to debugged context.
>>> Thus, like in (2), we will see unexpected single-stepping in
>>> el1_irq.
>>>
>>> Basically (1) and (2) are for v3.15, (3) and (4) for v3.1[67].
>>>
>>> * issue fixed by (2):
>>> Without (2), we would see another problem if a breakpoint is set at
>>> interrupt-sensible places, like gic_handle_irq():
>>>
>>> KGDB: re-enter error: breakpoint removed ffffffc000081258
>>> ------------[ cut here ]------------
>>> WARNING: CPU: 0 PID: 650 at kernel/debug/debug_core.c:435
>>> kgdb_handle_exception+0x1dc/0x1f4()
>>> Modules linked in:
>>> CPU: 0 PID: 650 Comm: sh Not tainted 3.17.0-rc2+ #177
>>> Call trace:
>>> [<ffffffc000087fac>] dump_backtrace+0x0/0x130
>>> [<ffffffc0000880ec>] show_stack+0x10/0x1c
>>> [<ffffffc0004d683c>] dump_stack+0x74/0xb8
>>> [<ffffffc0000ab824>] warn_slowpath_common+0x8c/0xb4
>>> [<ffffffc0000ab90c>] warn_slowpath_null+0x14/0x20
>>> [<ffffffc000121bfc>] kgdb_handle_exception+0x1d8/0x1f4
>>> [<ffffffc000092ffc>] kgdb_brk_fn+0x18/0x28
>>> [<ffffffc0000821c8>] brk_handler+0x9c/0xe8
>>> [<ffffffc0000811e8>] do_debug_exception+0x3c/0xac
>>> Exception stack(0xffffffc07e027650 to 0xffffffc07e027770)
>>> ...
>>> [<ffffffc000083cac>] el1_dbg+0x14/0x68
>>> [<ffffffc00012178c>] kgdb_cpu_enter+0x464/0x5c0
>>> [<ffffffc000121bb4>] kgdb_handle_exception+0x190/0x1f4
>>> [<ffffffc000092ffc>] kgdb_brk_fn+0x18/0x28
>>> [<ffffffc0000821c8>] brk_handler+0x9c/0xe8
>>> [<ffffffc0000811e8>] do_debug_exception+0x3c/0xac
>>> Exception stack(0xffffffc07e027ac0 to 0xffffffc07e027be0)
>>> ...
>>> [<ffffffc000083cac>] el1_dbg+0x14/0x68
>>> [<ffffffc00032e4b4>] __handle_sysrq+0x11c/0x190
>>> [<ffffffc00032e93c>] write_sysrq_trigger+0x4c/0x60
>>> [<ffffffc0001e7d58>] proc_reg_write+0x54/0x84
>>> [<ffffffc000192fa4>] vfs_write+0x98/0x1c8
>>> [<ffffffc0001939b0>] SyS_write+0x40/0xa0
>>>
>>> Once some interrupt occurs, a breakpoint at gic_handle_irq() triggers
>>> kgdb.
>>> Kgdb then calls kgdb_roundup_cpus() to sync with other cpus.
>>> Current kgdb_roundup_cpus() unmasks interrupts temporarily to
>>> use smp_call_function().
>>> This eventually allows another interrupt to occur and likely results in
>>> hitting a breakpoint at gic_handle_irq() again since debug exception is
>>> always enabled in el1_irq.
>>>
>>> We can avoid this issue by specifying "nokgdbroundup" in kernel
>>> parameter,
>>> but this will also leave other cpus be in unknown state in terms of
>>> kgdb,
>>> and may result in interfering with kgdb activity.
>>>
>>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
>>> ---
>>> arch/arm64/kernel/kgdb.c | 60
>>> +++++++++++++++++++++++++++++++++++-----------
>>> 1 file changed, 46 insertions(+), 14 deletions(-)
>>>
>>> diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
>>> index a0d10c5..81b5910 100644
>>> --- a/arch/arm64/kernel/kgdb.c
>>> +++ b/arch/arm64/kernel/kgdb.c
>>> @@ -19,9 +19,13 @@
>>> * along with this program. If not, see
>>> <http://www.gnu.org/licenses/>.
>>> */
>>>
>>> +#include <linux/cpumask.h>
>>> #include <linux/irq.h>
>>> +#include <linux/irq_work.h>
>>> #include <linux/kdebug.h>
>>> #include <linux/kgdb.h>
>>> +#include <linux/percpu.h>
>>> +#include <asm/ptrace.h>
>>> #include <asm/traps.h>
>>>
>>> struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
>>> @@ -95,6 +99,9 @@ struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
>>> { "fpcr", 4, -1 },
>>> };
>>>
>>> +static DEFINE_PER_CPU(unsigned int, kgdb_pstate);
>>> +static DEFINE_PER_CPU(struct irq_work, kgdb_irq_work);
>>> +
>>> char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
>>> {
>>> if (regno >= DBG_MAX_REG_NUM || regno < 0)
>>> @@ -176,18 +183,14 @@ int kgdb_arch_handle_exception(int
>>> exception_vector, int signo,
>>> * over and over again.
>>> */
>>> kgdb_arch_update_addr(linux_regs, remcom_in_buffer);
>>> - atomic_set(&kgdb_cpu_doing_single_step, -1);
>>> - kgdb_single_step = 0;
>>> -
>>> - /*
>>> - * Received continue command, disable single step
>>> - */
>>> - if (kernel_active_single_step())
>>> - kernel_disable_single_step();
>>>
>>> err = 0;
>>> break;
>>> case 's':
>>> + /* mask interrupts while single stepping */
>>> + __this_cpu_write(kgdb_pstate, linux_regs->pstate);
>>> + linux_regs->pstate |= PSR_I_BIT;
>>> +
>>> /*
>>> * Update step address value with address passed
>>> * with step packet.
>>> @@ -198,8 +201,6 @@ int kgdb_arch_handle_exception(int
>>> exception_vector, int signo,
>>> */
>>> kgdb_arch_update_addr(linux_regs, remcom_in_buffer);
>>> atomic_set(&kgdb_cpu_doing_single_step,
>>> raw_smp_processor_id());
>>> - kgdb_single_step = 1;
>>> -
>>> /*
>>> * Enable single step handling
>>> */
>>> @@ -229,6 +230,18 @@ static int kgdb_compiled_brk_fn(struct pt_regs
>>> *regs, unsigned int esr)
>>>
>>> static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr)
>>> {
>>> + unsigned int pstate;
>>> +
>>> + kernel_disable_single_step();
>>> + atomic_set(&kgdb_cpu_doing_single_step, -1);
>>> +
>>> + /* restore interrupt mask status */
>>> + pstate = __this_cpu_read(kgdb_pstate);
>>> + if (pstate & PSR_I_BIT)
>>> + regs->pstate |= PSR_I_BIT;
>>> + else
>>> + regs->pstate &= ~PSR_I_BIT;
>>> +
>>> kgdb_handle_exception(1, SIGTRAP, 0, regs);
>>> return 0;
>>> }
>>> @@ -249,16 +262,27 @@ static struct step_hook kgdb_step_hook = {
>>> .fn = kgdb_step_brk_fn
>>> };
>>>
>>> -static void kgdb_call_nmi_hook(void *ignored)
>>> +static void kgdb_roundup_hook(struct irq_work *work)
>>> {
>>> kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
>>> }
>>>
>>> void kgdb_roundup_cpus(unsigned long flags)
>>> {
>>> - local_irq_enable();
>>> - smp_call_function(kgdb_call_nmi_hook, NULL, 0);
>>> - local_irq_disable();
>>> + int cpu;
>>> + struct cpumask mask;
>>> + struct irq_work *work;
>>> +
>>> + mask = *cpu_online_mask;
>>> + cpumask_clear_cpu(smp_processor_id(), &mask);
>>> + cpu = cpumask_first(&mask);
>>> + if (cpu >= nr_cpu_ids)
>>> + return;
>>> +
>>> + for_each_cpu(cpu, &mask) {
>>> + work = per_cpu_ptr(&kgdb_irq_work, cpu);
>>> + irq_work_queue_on(work, cpu);
>>> + }
>>> }
>>>
>>> static int __kgdb_notify(struct die_args *args, unsigned long cmd)
>>> @@ -299,6 +323,8 @@ static struct notifier_block kgdb_notifier = {
>>> int kgdb_arch_init(void)
>>> {
>>> int ret = register_die_notifier(&kgdb_notifier);
>>> + int cpu;
>>> + struct irq_work *work;
>>>
>>> if (ret != 0)
>>> return ret;
>>> @@ -306,6 +332,12 @@ int kgdb_arch_init(void)
>>> register_break_hook(&kgdb_brkpt_hook);
>>> register_break_hook(&kgdb_compiled_brkpt_hook);
>>> register_step_hook(&kgdb_step_hook);
>>> +
>>> + for_each_possible_cpu(cpu) {
>>> + work = per_cpu_ptr(&kgdb_irq_work, cpu);
>>> + init_irq_work(work, kgdb_roundup_hook);
>>> + }
>>> +
>>> return 0;
>>> }
>>>
>>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists