| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <933BEC2E04D6A5458F4B0239FB547F9A34CC3608@fmsmsx118.amr.corp.intel.com>
Date: Fri, 9 Jan 2015 18:18:45 +0000
From: "Dev, Vasu" <vasu.dev@...el.com>
To: "Ronciak, John" <john.ronciak@...el.com>,
Ethan Zhao <ethan.zhao@...cle.com>,
"Kirsher, Jeffrey T" <jeffrey.t.kirsher@...el.com>,
"Brandeburg, Jesse" <jesse.brandeburg@...el.com>,
"Allan, Bruce W" <bruce.w.allan@...el.com>,
"Wyborny, Carolyn" <carolyn.wyborny@...el.com>,
"Skidmore, Donald C" <donald.c.skidmore@...el.com>,
"Rose, Gregory V" <gregory.v.rose@...el.com>,
"Vick, Matthew" <matthew.vick@...el.com>,
"Williams, Mitch A" <mitch.a.williams@...el.com>,
"Parikh, Neerav" <neerav.parikh@...el.com>
CC: Linux NICS <Linux-nics@...tope.jf.intel.com>,
"e1000-devel@...ts.sourceforge.net"
<e1000-devel@...ts.sourceforge.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"ethan.kernel@...il.com" <ethan.kernel@...il.com>,
"brian.maly@...cle.com" <brian.maly@...cle.com>
Subject: RE: [PATCH] i40e: don't enable and init FCOE by default when do PF
reset
> -----Original Message-----
> From: Ronciak, John
> Sent: Friday, January 09, 2015 8:42 AM
> To: Ethan Zhao; Kirsher, Jeffrey T; Brandeburg, Jesse; Allan, Bruce W;
> Wyborny, Carolyn; Skidmore, Donald C; Rose, Gregory V; Vick, Matthew;
> Williams, Mitch A; Dev, Vasu; Parikh, Neerav
> Cc: Linux NICS; e1000-devel@...ts.sourceforge.net; netdev@...r.kernel.org;
> linux-kernel@...r.kernel.org; ethan.kernel@...il.com;
> brian.maly@...cle.com
> Subject: RE: [PATCH] i40e: don't enable and init FCOE by default when do PF
> reset
>
> Adding Vasu and Neerav
>
> Cheers,
> John
>
> > -----Original Message-----
> > From: Ethan Zhao [mailto:ethan.zhao@...cle.com]
> > Sent: Friday, January 9, 2015 8:38 AM
> > To: Kirsher, Jeffrey T; Brandeburg, Jesse; Allan, Bruce W; Wyborny,
> > Carolyn; Skidmore, Donald C; Rose, Gregory V; Vick, Matthew; Ronciak,
> > John; Williams, Mitch A
> > Cc: Linux NICS; e1000-devel@...ts.sourceforge.net;
> > netdev@...r.kernel.org; linux-kernel@...r.kernel.org;
> > ethan.kernel@...il.com; brian.maly@...cle.com; Ethan Zhao
> > Subject: [PATCH] i40e: don't enable and init FCOE by default when do
> > PF reset
> >
> > While do PF reset with function i40e_reset_and_rebuild(), it will call
> > i40e_init_pf_fcoe() by default if FCOE is defined, thus if the PF is
> > resetted, FCOE will be enabled whatever it was - enabled or not.
> >
> > Such bug might be hit when PF resumes from suspend, run diagnostic
> > test with ethtool, setup VLAN etc.
> >
> > Passed building with v3.19-rc3.
> >
> > Signed-off-by: Ethan Zhao <ethan.zhao@...cle.com>
> > ---
> > drivers/net/ethernet/intel/i40e/i40e_main.c | 9 ++++++---
> > 1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
> > b/drivers/net/ethernet/intel/i40e/i40e_main.c
> > index a5f2660..a2572cc 100644
> > --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> > +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> > @@ -6180,9 +6180,12 @@ static void i40e_reset_and_rebuild(struct
> > i40e_pf *pf, bool reinit)
> > }
> > #endif /* CONFIG_I40E_DCB */
> > #ifdef I40E_FCOE
> > - ret = i40e_init_pf_fcoe(pf);
> > - if (ret)
> > - dev_info(&pf->pdev->dev, "init_pf_fcoe failed: %d\n", ret);
> > + if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
> > + ret = i40e_init_pf_fcoe(pf);
Calling i40e_init_pf_fcoe() here conflicts with its I40E_FLAG_FCOE_ENABLED pre-condition since I40E_FLAG_FCOE_ENABLED is set by very same i40e_init_pf_fcoe(), in turn i40e_init_pf_fcoe() will never get called.
Jeff Kirsher should be getting out a patch queued by me which adds I40E_FCoE Kbuild option, in that FCoE is disabled by default and user could enable FCoE only if needed, that patch would do same of skipping i40e_init_pf_fcoe() whether FCoE capability in device enabled or not in default config.
>From patchwork Wed Oct 2 23:26:08 2013
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [net] i40e: adds FCoE configure option
Date: Thu, 03 Oct 2013 07:26:08 -0000
From: Vasu Dev <vasu.dev@...el.com>
X-Patchwork-Id: 11797
Adds FCoE config option I40E_FCOE, so that FCoE can be enabled
as needed but otherwise have it disabled by default.
This also eliminate multiple FCoE config checks, instead now just
one config check for CONFIG_I40E_FCOE.
The I40E FCoE was added with 3.17 kernel and therefore this patch
shall be applied to stable 3.17 kernel also.
CC: <stable@...r.kernel.org>
Signed-off-by: Vasu Dev <vasu.dev@...el.com>
Tested-by: Jim Young <jamesx.m.young@...el.com>
---
drivers/net/ethernet/intel/Kconfig | 11 +++++++++++
drivers/net/ethernet/intel/i40e/Makefile | 2 +-
drivers/net/ethernet/intel/i40e/i40e_osdep.h | 4 ++--
3 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 5b8300a..4d61ef5 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -281,6 +281,17 @@ config I40E_DCB
If unsure, say N.
+config I40E_FCOE
+ bool "Fibre Channel over Ethernet (FCoE)"
+ default n
+ depends on I40E && DCB && FCOE
+ ---help---
+ Say Y here if you want to use Fibre Channel over Ethernet (FCoE)
+ in the driver. This will create new netdev for exclusive FCoE
+ use with XL710 FCoE offloads enabled.
+
+ If unsure, say N.
+
config I40EVF
tristate "Intel(R) XL710 X710 Virtual Function Ethernet support"
depends on PCI_MSI
diff --git a/drivers/net/ethernet/intel/i40e/Makefile b/drivers/net/ethernet/intel/i40e/Makefile
index 4b94ddb..c405819 100644
--- a/drivers/net/ethernet/intel/i40e/Makefile
+++ b/drivers/net/ethernet/intel/i40e/Makefile
@@ -44,4 +44,4 @@ i40e-objs := i40e_main.o \
i40e_virtchnl_pf.o
i40e-$(CONFIG_I40E_DCB) += i40e_dcb.o i40e_dcb_nl.o
-i40e-$(CONFIG_FCOE:m=y) += i40e_fcoe.o
+i40e-$(CONFIG_I40E_FCOE) += i40e_fcoe.o
diff --git a/drivers/net/ethernet/intel/i40e/i40e_osdep.h b/drivers/net/ethernet/intel/i40e/i40e_osdep.h
index 045b5c4..ad802dd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_osdep.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_osdep.h
@@ -78,7 +78,7 @@ do { \
} while (0)
typedef enum i40e_status_code i40e_status;
-#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#ifdef CONFIG_I40E_FCOE
#define I40E_FCOE
-#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */
+#endif
#endif /* _I40E_OSDEP_H_ */
> > + if (ret)
> > + dev_info(&pf->pdev->dev,
> > + "init_pf_fcoe failed: %d\n", ret);
> > + }
> >
> > #endif
> > /* do basic switch setup */
> > --
> > 1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists