linux-kernel - [PATCH 0/4] Add sd/emmc support for stih407 family silicon

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1421767964-8798-1-git-send-email-peter.griffin@linaro.org>
Date:	Tue, 20 Jan 2015 15:32:40 +0000
From:	Peter Griffin <peter.griffin@...aro.org>
To:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	srinivas.kandagatla@...il.com, maxime.coquelin@...com,
	patrice.chotard@...com, mturquette@...aro.org,
	sboyd@...eaurora.org, chris@...ntf.net, ulf.hansson@...aro.org
Cc:	peter.griffin@...aro.org, lee.jones@...aro.org,
	peppe.cavallaro@...com, olivier.bideau@...com,
	gabriel.fernandez@...com, linux-mmc@...r.kernel.org,
	devicetree@...r.kernel.org
Subject: [PATCH 0/4] Add sd/emmc support for stih407 family silicon

Hi,

This series adds sd/emmc support to the sdhci-st.c driver for stih407
family silicon. The changes mainly involve congiguring some extra glue
registers which configure the controller.

This series also adds support for UHS modes for eMMC. To allow
UHS HS200/SD104 modes to function correctly, due to the
tight timing constriants and data tuning requirement, support
for PVT independent delay management is also added. Two types
of delay management are supported, static delay management and
dynamic delay management (dynamic delay loop), this delay
management is only available on eMMC pads on stih410 and later
silicon.

This has been tested with stih410-b2120 on eMMC and sd, at various
clock speeds. As part of this testing a bug was also found in the
upstream flexgen clock set_rate implementation.

    max-frequency = 200Mhz
    /dev/mmcblk0p1:
     Timing buffered disk reads: 270 MB in  3.02 seconds =  89.54 MB/sec

    max-frequency = 100Mhz
    root@...ian-armhf:~# hdparm -t /dev/mmcblk0p1
    /dev/mmcblk0p1:
     Timing buffered disk reads: 210 MB in  3.00 seconds =  70.00 MB/sec

    max-frequency = 50Mhz
    root@...ian-armhf:~# hdparm -t /dev/mmcblk0p1
    /dev/mmcblk0p1:
     Timing buffered disk reads: 118 MB in  3.00 seconds =  39.28 MB/sec

It has also been tested on stih416-b2020 to ensure we have caused no
regressions. Finally the dt documentation has been updated to reflect
the changes in the driver code. Intrestingly it seems we are the first
upstream platform to be using some of the uhs bindings such as
sd-uhs-sdr104.

regards,

Peter.

Peter Griffin (4):
  clk: st: STiH410: Fix pdiv and fdiv divisor when setting rate
  sdhci-st: Add support for stih407 family silicon.
  mmc: sdhci-st: Update ST SDHCI binding documentation.
  ARM: STi: DT: STiH407: Add dt nodes for sdhci and emmc.

 Documentation/devicetree/bindings/mmc/sdhci-st.txt | 100 +++++-
 arch/arm/boot/dts/stih407-family.dtsi              |  30 ++
 arch/arm/boot/dts/stih410-b2120.dts                |  10 +
 arch/arm/boot/dts/stihxxx-b2120.dtsi               |   8 +
 drivers/clk/st/clk-flexgen.c                       |  19 +-
 drivers/mmc/host/sdhci-st.c                        | 351 ++++++++++++++++++++-
 6 files changed, 496 insertions(+), 22 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/