| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAEzqOZtdhOf7xipW8MmojZn+F6i045+=2xC0TPqt3jonmEGL5w@mail.gmail.com>
Date: Wed, 21 Jan 2015 16:52:04 +0530
From: Vishnu Patekar <vishnupatekar0510@...il.com>
To: "linux-sunxi@...glegroups.com" <linux-sunxi@...glegroups.com>
Cc: Hans de Goede <hdegoede@...hat.com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
"maxime.ripard@...e-electrons.com" <maxime.ripard@...e-electrons.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: Re: [linux-sunxi] Re: [PATCH v4 2/5] ARM:sunxi:drivers:input Add
support for A10/A20 PS2
Hello Dmitry,
On Tue, Jan 20, 2015 at 6:05 AM, Dmitry Torokhov
<dmitry.torokhov@...il.com> wrote:
> On Mon, Jan 19, 2015 at 11:37:38AM +0530, Vishnu Patekar wrote:
>> Hello Dmitry,
>>
>> Thank you for review comments. Please see in-lined.
>>
>> On Sun, Jan 18, 2015 at 3:55 AM, Dmitry Torokhov
>> <dmitry.torokhov@...il.com> wrote:
>> > Hi Vishnu,
>> >
>> > On Fri, Jan 16, 2015 at 07:33:38PM +0530, Vishnu Patekar wrote:
>> >> Signed-off-by: VishnuPatekar <vishnupatekar0510@...il.com>
>> >> ---
>> >> drivers/input/serio/Kconfig | 11 ++
>> >> drivers/input/serio/Makefile | 1 +
>> >> drivers/input/serio/sun4i-ps2.c | 330 +++++++++++++++++++++++++++++++++++++++
>> >> 3 files changed, 342 insertions(+)
>> >> create mode 100644 drivers/input/serio/sun4i-ps2.c
>> >>
>> >> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
>> >> index bc2d474..964afc5 100644
>> >> --- a/drivers/input/serio/Kconfig
>> >> +++ b/drivers/input/serio/Kconfig
>> >> @@ -281,4 +281,15 @@ config HYPERV_KEYBOARD
>> >> To compile this driver as a module, choose M here: the module will
>> >> be called hyperv_keyboard.
>> >>
>> >> +config SERIO_SUN4I_PS2
>> >> + tristate "Allwinner A10 PS/2 controller support"
>> >> + default n
>> >> + depends on ARCH_SUNXI || COMPILE_TEST
>> >> + help
>> >> + This selects support for the PS/2 Host Controller on
>> >> + Allwinner A10.
>> >> +
>> >> + To compile this driver as a module, choose M here: the
>> >> + module will be called sun4i-ps2.
>> >> +
>> >> endif
>> >> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
>> >> index 815d874..c600089 100644
>> >> --- a/drivers/input/serio/Makefile
>> >> +++ b/drivers/input/serio/Makefile
>> >> @@ -29,3 +29,4 @@ obj-$(CONFIG_SERIO_ARC_PS2) += arc_ps2.o
>> >> obj-$(CONFIG_SERIO_APBPS2) += apbps2.o
>> >> obj-$(CONFIG_SERIO_OLPC_APSP) += olpc_apsp.o
>> >> obj-$(CONFIG_HYPERV_KEYBOARD) += hyperv-keyboard.o
>> >> +obj-$(CONFIG_SERIO_SUN4I_PS2) += sun4i-ps2.o
>> >> diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
>> >> new file mode 100644
>> >> index 0000000..06b3fef
>> >> --- /dev/null
>> >> +++ b/drivers/input/serio/sun4i-ps2.c
>> >> @@ -0,0 +1,330 @@
>> >> +/*
>> >> + * Driver for Allwinner A10 PS2 host controller
>> >> + *
>> >> + * Author: Vishnu Patekar <vishnupatekar0510@...il.com>
>> >> + * Aaron.maoye <leafy.myeh@...bietech.com>
>> >> + *
>> >> + *
>> >> + */
>> >> +
>> >> +#include <linux/module.h>
>> >> +#include <linux/serio.h>
>> >> +#include <linux/interrupt.h>
>> >> +#include <linux/errno.h>
>> >> +#include <linux/slab.h>
>> >> +#include <linux/list.h>
>> >> +#include <linux/io.h>
>> >> +#include <linux/of_address.h>
>> >> +#include <linux/of_device.h>
>> >> +#include <linux/of_irq.h>
>> >> +#include <linux/of_platform.h>
>> >> +#include <linux/clk.h>
>> >> +#include <linux/delay.h>
>> >> +
>> >> +#define DRIVER_NAME "sun4i-ps2"
>> >> +
>> >> +/* register offset definitions */
>> >> +#define PS2_REG_GCTL 0x00 /* PS2 Module Global Control Reg */
>> >> +#define PS2_REG_DATA 0x04 /* PS2 Module Data Reg */
>> >> +#define PS2_REG_LCTL 0x08 /* PS2 Module Line Control Reg */
>> >> +#define PS2_REG_LSTS 0x0C /* PS2 Module Line Status Reg */
>> >> +#define PS2_REG_FCTL 0x10 /* PS2 Module FIFO Control Reg */
>> >> +#define PS2_REG_FSTS 0x14 /* PS2 Module FIFO Status Reg */
>> >> +#define PS2_REG_CLKDR 0x18 /* PS2 Module Clock Divider Reg*/
>> >> +
>> >> +/* PS2 GLOBAL CONTROL REGISTER PS2_GCTL */
>> >> +#define PS2_GCTL_INTFLAG BIT(4)
>> >> +#define PS2_GCTL_INTEN BIT(3)
>> >> +#define PS2_GCTL_RESET BIT(2)
>> >> +#define PS2_GCTL_MASTER BIT(1)
>> >> +#define PS2_GCTL_BUSEN BIT(0)
>> >> +
>> >> +/* PS2 LINE CONTROL REGISTER */
>> >> +#define PS2_LCTL_NOACK BIT(18)
>> >> +#define PS2_LCTL_TXDTOEN BIT(8)
>> >> +#define PS2_LCTL_STOPERREN BIT(3)
>> >> +#define PS2_LCTL_ACKERREN BIT(2)
>> >> +#define PS2_LCTL_PARERREN BIT(1)
>> >> +#define PS2_LCTL_RXDTOEN BIT(0)
>> >> +
>> >> +/* PS2 LINE STATUS REGISTER */
>> >> +#define PS2_LSTS_TXTDO BIT(8)
>> >> +#define PS2_LSTS_STOPERR BIT(3)
>> >> +#define PS2_LSTS_ACKERR BIT(2)
>> >> +#define PS2_LSTS_PARERR BIT(1)
>> >> +#define PS2_LSTS_RXTDO BIT(0)
>> >> +
>> >> +#define PS2_LINE_ERROR_BIT \
>> >> + (PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR | \
>> >> + PS2_LSTS_PARERR | PS2_LSTS_RXTDO)
>> >> +
>> >> +/* PS2 FIFO CONTROL REGISTER */
>> >> +#define PS2_FCTL_TXRST BIT(17)
>> >> +#define PS2_FCTL_RXRST BIT(16)
>> >> +#define PS2_FCTL_TXUFIEN BIT(10)
>> >> +#define PS2_FCTL_TXOFIEN BIT(9)
>> >> +#define PS2_FCTL_TXRDYIEN BIT(8)
>> >> +#define PS2_FCTL_RXUFIEN BIT(2)
>> >> +#define PS2_FCTL_RXOFIEN BIT(1)
>> >> +#define PS2_FCTL_RXRDYIEN BIT(0)
>> >> +
>> >> +/* PS2 FIFO STATUS REGISTER */
>> >> +#define PS2_FSTS_TXUF BIT(10)
>> >> +#define PS2_FSTS_TXOF BIT(9)
>> >> +#define PS2_FSTS_TXRDY BIT(8)
>> >> +#define PS2_FSTS_RXUF BIT(2)
>> >> +#define PS2_FSTS_RXOF BIT(1)
>> >> +#define PS2_FSTS_RXRDY BIT(0)
>> >> +
>> >> +#define PS2_FIFO_ERROR_BIT \
>> >> + (PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_RXUF | PS2_FSTS_RXOF)
>> >> +
>> >> +#define PS2_SAMPLE_CLK 1000000
>> >> +#define PS2_SCLK 125000
>> >> +
>> >> +struct sun4i_ps2data {
>> >> + struct serio *serio;
>> >> + struct device *dev;
>> >> +
>> >> + /* IO mapping base */
>> >> + void __iomem *reg_base;
>> >> +
>> >> + /* clock management */
>> >> + struct clk *clk;
>> >> +
>> >> + /* irq */
>> >> + spinlock_t lock;
>> >> + int irq;
>> >> +};
>> >> +
>> >> +/*********************/
>> >> +/* Interrupt handler */
>> >> +/*********************/
>> >> +static irqreturn_t sun4i_ps2_interrupt(int irq, void *dev_id)
>> >> +{
>> >> + struct sun4i_ps2data *drvdata = dev_id;
>> >> + u32 intr_status;
>> >> + u32 fifo_status;
>> >> + unsigned char byte;
>> >> + unsigned int rxflags = 0;
>> >> + u32 rval;
>> >> +
>> >> + spin_lock(&drvdata->lock);
>> >> +
>> >> + /* Get the PS/2 interrupts and clear them */
>> >> + intr_status = readl(drvdata->reg_base + PS2_REG_LSTS);
>> >> + fifo_status = readl(drvdata->reg_base + PS2_REG_FSTS);
>> >> +
>> >> + /*Check Line Status Register*/
>> >> + if (intr_status & PS2_LINE_ERROR_BIT) {
>> >> + rxflags = (intr_status & PS2_LINE_ERROR_BIT) ? SERIO_FRAME : 0;
>> >> + rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_PARITY : 0;
>> >> + rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_TIMEOUT : 0;
>> >> +
>> >> + rval = PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR |
>> >> + PS2_LSTS_PARERR | PS2_LSTS_RXTDO;
>> >> + writel(rval, drvdata->reg_base + PS2_REG_LSTS);
>> >> + }
>> >> +
>> >> + /*Check FIFO Status Register*/
>> >> + if (fifo_status & PS2_FIFO_ERROR_BIT) {
>> >> + rval = PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_TXRDY |
>> >> + PS2_FSTS_RXUF | PS2_FSTS_RXOF | PS2_FSTS_RXRDY;
>> >> + writel(rval, drvdata->reg_base + PS2_REG_FSTS);
>> >> + }
>> >> +
>> >> + rval = (fifo_status >> 16) & 0x3;
>> >> + while (rval--) {
>> >> + byte = readl(drvdata->reg_base + PS2_REG_DATA) & 0xff;
>> >> + serio_interrupt(drvdata->serio, byte, rxflags);
>> >> + }
>> >> +
>> >> + writel(intr_status, drvdata->reg_base + PS2_REG_LSTS);
>> >> + writel(fifo_status, drvdata->reg_base + PS2_REG_FSTS);
>> >> +
>> >> + spin_unlock(&drvdata->lock);
>> >> +
>> >> + return IRQ_HANDLED;
>> >> +}
>> >> +
>> >> +
>> >> +static int sun4i_ps2_open(struct serio *pserio)
>> >> +{
>> >> + struct sun4i_ps2data *drvdata = pserio->port_data;
>> >> + u32 src_clk = 0;
>> >> + u32 clk_scdf;
>> >> + u32 clk_pcdf;
>> >> + u32 rval;
>> >> + unsigned long flags;
>> >> +
>> >> + /*Set Line Control And Enable Interrupt*/
>> >> + rval = PS2_LCTL_STOPERREN | PS2_LCTL_ACKERREN
>> >> + | PS2_LCTL_PARERREN | PS2_LCTL_RXDTOEN;
>> >> + writel(rval, drvdata->reg_base + PS2_REG_LCTL);
>> >> +
>> >> + /*Reset FIFO*/
>> >> + rval = PS2_FCTL_TXRST | PS2_FCTL_RXRST | PS2_FCTL_TXUFIEN
>> >> + | PS2_FCTL_TXOFIEN | PS2_FCTL_RXUFIEN
>> >> + | PS2_FCTL_RXOFIEN | PS2_FCTL_RXRDYIEN;
>> >> +
>> >> + writel(rval, drvdata->reg_base + PS2_REG_FCTL);
>> >> +
>> >> + src_clk = clk_get_rate(drvdata->clk);
>> >> + /*Set Clock Divider Register*/
>> >> + clk_scdf = src_clk / PS2_SAMPLE_CLK - 1;
>> >> + clk_pcdf = PS2_SAMPLE_CLK / PS2_SCLK - 1;
>> >> + rval = (clk_scdf<<8) | clk_pcdf;
>> >> + writel(rval, drvdata->reg_base + PS2_REG_CLKDR);
>> >> +
>> >> +
>> >> + /*Set Global Control Register*/
>> >> + rval = PS2_GCTL_RESET | PS2_GCTL_INTEN | PS2_GCTL_MASTER
>> >> + | PS2_GCTL_BUSEN;
>> >> +
>> >> + spin_lock_irqsave(&drvdata->lock, flags);
>> >> + writel(rval, drvdata->reg_base + PS2_REG_GCTL);
>> >> + spin_unlock_irqrestore(&drvdata->lock, flags);
>> >> +
>> >> + return 0;
>> >> +}
>> >> +
>> >> +static void sun4i_ps2_close(struct serio *pserio)
>> >> +{
>> >> + struct sun4i_ps2data *drvdata = pserio->port_data;
>> >> +
>> >> + synchronize_irq(drvdata->irq);
>> >
>> > synchronize_irq() on it's own is not very useful. You also need to shut
>> > off interrupts on the chip (I suppose by clearing PS2_GCTL_INTEN?)
>> > before calling synchronize_irq.
>> Okie, I'll do it. Yes, clearing PS2_GCTL_INTEN will shut off the interrupts.
>
> Please also do shut off interrupts on the chip before requesting IRQ.
Okie
>
>> >
>> >> +}
>> >> +
>> >> +static int sun4i_ps2_write(struct serio *pserio, unsigned char val)
>> >> +{
>> >> + unsigned long expire = jiffies + msecs_to_jiffies(10000);
>> >> + struct sun4i_ps2data *drvdata;
>> >> +
>> >> + drvdata = (struct sun4i_ps2data *)pserio->port_data;
>> >> +
>> >> + do {
>> >> + if (readl(drvdata->reg_base + PS2_REG_FSTS) & PS2_FSTS_TXRDY) {
>> >> + writel(val, drvdata->reg_base + PS2_REG_DATA);
>> >> + return 0;
>> >> + }
>> >> + } while (time_before(jiffies, expire));
>> >> +
>> >> + return SERIO_TIMEOUT;
>> >> +}
>> >> +
>> >> +static int sun4i_ps2_probe(struct platform_device *pdev)
>> >> +{
>> >> + struct resource *res; /* IO mem resources */
>> >> + struct sun4i_ps2data *drvdata;
>> >> + struct serio *serio;
>> >> + struct device *dev = &pdev->dev;
>> >> + unsigned int irq;
>> >> + int error;
>> >> +
>> >> + drvdata = devm_kzalloc(dev, sizeof(struct sun4i_ps2data), GFP_KERNEL);
>> >> + serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
>> >> + if (!drvdata || !serio) {
>> >> + error = -ENOMEM;
>> >> + goto err_free_mem;
>> >> + }
>> >> +
>> >> + spin_lock_init(&drvdata->lock);
>> >> +
>> >> + /* IO */
>> >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> >> + drvdata->reg_base = devm_ioremap_resource(dev, res);
>> >> + if (IS_ERR(drvdata->reg_base)) {
>> >> + dev_err(dev, "failed to map registers\n");
>> >> + error = PTR_ERR(drvdata->reg_base);
>> >> + goto err_free_mem;
>> >> + }
>> >> +
>> >> + drvdata->clk = devm_clk_get(dev, NULL);
>> >> + if (IS_ERR(drvdata->clk)) {
>> >> + error = PTR_ERR(drvdata->clk);
>> >> + dev_err(dev, "couldn't get clock %d\n", error);
>> >> + goto err_free_mem;
>> >> + }
>> >> +
>> >> + error = clk_prepare_enable(drvdata->clk);
>> >> + if (error) {
>> >> + dev_err(dev, "failed to enable clock %d\n", error);
>> >> + goto err_free_mem;
>> >> + }
>> >> +
>> >> + serio->id.type = SERIO_8042;
>> >> + serio->write = sun4i_ps2_write;
>> >> + serio->open = sun4i_ps2_open;
>> >> + serio->close = sun4i_ps2_close;
>> >> + serio->port_data = drvdata;
>> >> + serio->dev.parent = dev;
>> >> + strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
>> >> + strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
>> >> +
>> >> + /* Get IRQ for the device */
>> >> + irq = platform_get_irq(pdev, 0);
>> >> + if (!irq) {
>> >> + dev_err(dev, "no IRQ found\n");
>> >> + error = -ENXIO;
>> >> + goto error_disable_clk;
>> >> + }
>> >> +
>> >> + drvdata->irq = irq;
>> >> + drvdata->serio = serio;
>> >> + drvdata->dev = dev;
>> >> + error = devm_request_threaded_irq(dev, drvdata->irq,
>> >> + sun4i_ps2_interrupt, NULL, 0, DRIVER_NAME, drvdata);
>> >> +
>> >> + if (error) {
>> >> + dev_err(drvdata->dev, "Interrupt alloc failed %d:error:%d\n",
>> >> + drvdata->irq, error);
>> >> + goto error_disable_clk;
>> >> + }
>> >> +
>> >> + serio_register_port(serio);
>> >> + platform_set_drvdata(pdev, drvdata);
>> >> +
>> >> + return 0; /* success */
>> >> +
>> >> +error_disable_clk:
>> >> + clk_disable_unprepare(drvdata->clk);
>> >> +
>> >> +err_free_mem:
>> >> + kfree(serio);
>> >> + return error;
>> >> +}
>> >> +
>> >> +static int sun4i_ps2_remove(struct platform_device *pdev)
>> >> +{
>> >> + struct sun4i_ps2data *drvdata = platform_get_drvdata(pdev);
>> >> +
>> >> + serio_unregister_port(drvdata->serio);
>> >> +
>> >> + if (!IS_ERR(drvdata->clk))
>> >> + clk_disable_unprepare(drvdata->clk);
>> >> + kfree(drvdata->serio);
>> >
>> > Serio is refcounted, you do not free it after its has been registered.
>> > Overall I'd rather you did not use devm* interfaces here since you are
>> > forced to mix managed and manually freed resources.
>> Okie, No need to free serio here.
>> If serio is not manually freed here, It is not freeing anything else manually.
>
> You are still unregistering the port manually and disabling the clock manually.
>>
>> do you still feel I should not use devm* interfaces here?
>
> Yes, because of above. My rule of thumb - when using devm* API there should not
> be remove() at all.
Okie, I'll remove devm* interfaces.
>
> BTW, if one added devm_* API to serio, similar to devm* in input core, I'd take
> such patch.
This seems a ultimate solution to use devm* interfaces. For now, I'll
just avoid using devm* interfaces.
Still, we have to manually disable the clock, didn't we?
Well, I saw your old devm_clk_* patch, it was not mainlined. Do we
have any other way to use managed clk interfaces?
any further information on this interesting patchset
?https://lkml.org/lkml/2012/11/20/173
>
> Thanks.
>
> --
> Dmitry
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@...glegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists