| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHrpEqQ-eoqM3W1hYcS6EPTmur1FSfm8TeEjYrtZ+PquavL86w@mail.gmail.com>
Date: Wed, 21 Jan 2015 10:16:03 -0600
From: Zhi Li <lznuaa@...il.com>
To: Stefan Wahren <stefan.wahren@...e.com>
Cc: mturquette@...aro.org,
Marek VaĊĦut <marex@...x.de>,
kernel list <linux-kernel@...r.kernel.org>,
Sascha Hauer <kernel@...gutronix.de>, harald@...ib.org,
Shawn Guo <shawn.guo@...aro.org>,
Fabio Estevam <festevam@...il.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH V2] clk: mxs: Fix invalid 32-bit access to frac registers
On Sun, Dec 28, 2014 at 4:26 AM, Stefan Wahren <stefan.wahren@...e.com> wrote:
> According to i.MX23 and i.MX28 reference manual the fractional
> clock control registers must be addressed by byte instructions.
>
I don't think mx23 and mx28 have such limitation. I will double check
with IC team about this.
RTL is generated from a xml file. All registers implement is unified.
I don't think only clock control register have such limitation and
other registers not.
best regards
Frank Li (Frank.Li@...ecale.com).
> This patch fixes the erroneous 32-bit access to these registers
> and extends the comment in the init functions.
>
> Btw the imx23 init now uses a R-M-W sequence just like imx28 init
> to avoid any clock glitches.
>
> The changes has been tested only with a i.MX28 board, because i don't
> have access to an i.MX23 board.
>
> Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
> ---
> Changes in V2:
> - use relaxed access operations in clk-ref
>
> drivers/clk/mxs/clk-imx23.c | 11 ++++++++---
> drivers/clk/mxs/clk-imx28.c | 19 +++++++++++++------
> drivers/clk/mxs/clk-ref.c | 19 ++++++++++---------
> 3 files changed, 31 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c
> index 9fc9359..a084566 100644
> --- a/drivers/clk/mxs/clk-imx23.c
> +++ b/drivers/clk/mxs/clk-imx23.c
> @@ -46,11 +46,13 @@ static void __iomem *digctrl;
> #define BP_CLKSEQ_BYPASS_SAIF 0
> #define BP_CLKSEQ_BYPASS_SSP 5
> #define BP_SAIF_DIV_FRAC_EN 16
> -#define BP_FRAC_IOFRAC 24
> +
> +#define FRAC_IO 3
>
> static void __init clk_misc_init(void)
> {
> u32 val;
> + u8 frac;
>
> /* Gate off cpu clock in WFI for power saving */
> writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
> @@ -72,9 +74,12 @@ static void __init clk_misc_init(void)
> /*
> * 480 MHz seems too high to be ssp clock source directly,
> * so set frac to get a 288 MHz ref_io.
> + * According to reference manual we must access frac bytewise.
> */
> - writel_relaxed(0x3f << BP_FRAC_IOFRAC, FRAC + CLR);
> - writel_relaxed(30 << BP_FRAC_IOFRAC, FRAC + SET);
> + frac = readb_relaxed(FRAC + FRAC_IO);
> + frac &= ~0x3f;
> + frac |= 30;
> + writeb_relaxed(frac, FRAC + FRAC_IO);
> }
>
> static const char *sel_pll[] __initconst = { "pll", "ref_xtal", };
> diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
> index a6c3501..c541377 100644
> --- a/drivers/clk/mxs/clk-imx28.c
> +++ b/drivers/clk/mxs/clk-imx28.c
> @@ -53,8 +53,9 @@ static void __iomem *clkctrl;
> #define BP_ENET_SLEEP 31
> #define BP_CLKSEQ_BYPASS_SAIF0 0
> #define BP_CLKSEQ_BYPASS_SSP0 3
> -#define BP_FRAC0_IO1FRAC 16
> -#define BP_FRAC0_IO0FRAC 24
> +
> +#define FRAC0_IO1 2
> +#define FRAC0_IO0 3
>
> static void __iomem *digctrl;
> #define DIGCTRL digctrl
> @@ -85,6 +86,7 @@ int mxs_saif_clkmux_select(unsigned int clkmux)
> static void __init clk_misc_init(void)
> {
> u32 val;
> + u8 frac;
>
> /* Gate off cpu clock in WFI for power saving */
> writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
> @@ -118,11 +120,16 @@ static void __init clk_misc_init(void)
> /*
> * 480 MHz seems too high to be ssp clock source directly,
> * so set frac0 to get a 288 MHz ref_io0 and ref_io1.
> + * According to reference manual we must access frac0 bytewise.
> */
> - val = readl_relaxed(FRAC0);
> - val &= ~((0x3f << BP_FRAC0_IO0FRAC) | (0x3f << BP_FRAC0_IO1FRAC));
> - val |= (30 << BP_FRAC0_IO0FRAC) | (30 << BP_FRAC0_IO1FRAC);
> - writel_relaxed(val, FRAC0);
> + frac = readb_relaxed(FRAC0 + FRAC0_IO0);
> + frac &= ~0x3f;
> + frac |= 30;
> + writeb_relaxed(frac, FRAC0 + FRAC0_IO0);
> + frac = readb_relaxed(FRAC0 + FRAC0_IO1);
> + frac &= ~0x3f;
> + frac |= 30;
> + writeb_relaxed(frac, FRAC0 + FRAC0_IO1);
> }
>
> static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", };
> diff --git a/drivers/clk/mxs/clk-ref.c b/drivers/clk/mxs/clk-ref.c
> index 4adeed6..ad3851c 100644
> --- a/drivers/clk/mxs/clk-ref.c
> +++ b/drivers/clk/mxs/clk-ref.c
> @@ -16,6 +16,8 @@
> #include <linux/slab.h>
> #include "clk.h"
>
> +#define BF_CLKGATE BIT(7)
> +
> /**
> * struct clk_ref - mxs reference clock
> * @hw: clk_hw for the reference clock
> @@ -39,7 +41,7 @@ static int clk_ref_enable(struct clk_hw *hw)
> {
> struct clk_ref *ref = to_clk_ref(hw);
>
> - writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + CLR);
> + writeb_relaxed(BF_CLKGATE, ref->reg + ref->idx + CLR);
>
> return 0;
> }
> @@ -48,7 +50,7 @@ static void clk_ref_disable(struct clk_hw *hw)
> {
> struct clk_ref *ref = to_clk_ref(hw);
>
> - writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + SET);
> + writeb_relaxed(BF_CLKGATE, ref->reg + ref->idx + SET);
> }
>
> static unsigned long clk_ref_recalc_rate(struct clk_hw *hw,
> @@ -56,7 +58,7 @@ static unsigned long clk_ref_recalc_rate(struct clk_hw *hw,
> {
> struct clk_ref *ref = to_clk_ref(hw);
> u64 tmp = parent_rate;
> - u8 frac = (readl_relaxed(ref->reg) >> (ref->idx * 8)) & 0x3f;
> + u8 frac = readb_relaxed(ref->reg + ref->idx) & 0x3f;
>
> tmp *= 18;
> do_div(tmp, frac);
> @@ -93,8 +95,7 @@ static int clk_ref_set_rate(struct clk_hw *hw, unsigned long rate,
> struct clk_ref *ref = to_clk_ref(hw);
> unsigned long flags;
> u64 tmp = parent_rate;
> - u32 val;
> - u8 frac, shift = ref->idx * 8;
> + u8 frac, val;
>
> tmp = tmp * 18 + rate / 2;
> do_div(tmp, rate);
> @@ -107,10 +108,10 @@ static int clk_ref_set_rate(struct clk_hw *hw, unsigned long rate,
>
> spin_lock_irqsave(&mxs_lock, flags);
>
> - val = readl_relaxed(ref->reg);
> - val &= ~(0x3f << shift);
> - val |= frac << shift;
> - writel_relaxed(val, ref->reg);
> + val = readb_relaxed(ref->reg + ref->idx);
> + val &= ~0x3f;
> + val |= frac;
> + writeb_relaxed(val, ref->reg + ref->idx);
>
> spin_unlock_irqrestore(&mxs_lock, flags);
>
> --
> 1.7.9.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists