| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <tip-e03f9088e22ca7e2b0de826466540e2527518e52@git.kernel.org>
Date: Mon, 26 Jan 2015 02:43:28 -0800
From: tip-bot for Magnus Damm <tipbot@...or.com>
To: linux-tip-commits@...r.kernel.org
Cc: magnus.damm@...il.com, tglx@...utronix.de, mingo@...nel.org,
damm+renesas@...nsource.se, linux-kernel@...r.kernel.org,
hpa@...or.com
Subject: [tip:irq/core] irqchip: renesas-intc-irqpin:
r8a7779 IRLM setup support
Commit-ID: e03f9088e22ca7e2b0de826466540e2527518e52
Gitweb: http://git.kernel.org/tip/e03f9088e22ca7e2b0de826466540e2527518e52
Author: Magnus Damm <damm+renesas@...nsource.se>
AuthorDate: Wed, 3 Dec 2014 21:18:03 +0900
Committer: Thomas Gleixner <tglx@...utronix.de>
CommitDate: Mon, 26 Jan 2015 11:38:22 +0100
irqchip: renesas-intc-irqpin: r8a7779 IRLM setup support
Add r8a7779 specific support for IRLM bit configuration
in the INTC-IRQPIN driver. Without this code we need
special workaround code in arch/arm/mach-shmobile.
The IRLM bit for the INTC hardware exists on various
older SH-based SoCs and is used to select between two
modes for the external interrupt pins IRQ0 to IRQ3:
IRLM = 0: (default from reset on r8a7779)
In this mode the pins IRQ0 to IRQ3 are used together
to give a value between 0 and 15 to the SoC. External
logic is required for masking. This mode is not
supported by the INTC-IRQPIN driver.
IRLM = 1: (needs this patch or configuration elsewhere)
In this mode IRQ0 to IRQ3 operate as 4 individual
external interrupt pins. In this mode the SMSC ethernet
chip can be used via IRQ1 on r8a7779 Marzen. This mode
is the only supported mode by the INTC-IRQPIN driver.
For this patch to work the r8a7779 DTS needs to pass
the ICR0 register as the last register bank.
Signed-off-by: Magnus Damm <damm+renesas@...nsource.se>
Cc: Magnus Damm <magnus.damm@...il.com>
Cc: horms@...ge.net.au
Cc: jason@...edaemon.net
Link: http://lkml.kernel.org/r/20141203121803.5936.35881.sendpatchset@w520
Signed-off-by: Thomas Gleixner <tglx@...utronix.de>
---
.../interrupt-controller/renesas,intc-irqpin.txt | 5 +++
drivers/irqchip/irq-renesas-intc-irqpin.c | 50 ++++++++++++++++++----
2 files changed, 46 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
index c73acd0..4f7946a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt
@@ -9,6 +9,11 @@ Required properties:
- "renesas,intc-irqpin-r8a7778" (R-Car M1A)
- "renesas,intc-irqpin-r8a7779" (R-Car H1)
- "renesas,intc-irqpin-sh73a0" (SH-Mobile AG5)
+
+- reg: Base address and length of each register bank used by the external
+ IRQ pins driven by the interrupt controller hardware module. The base
+ addresses, length and number of required register banks varies with soctype.
+
- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
interrupts.txt in this directory
diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c
index 078cac5..9a0767b 100644
--- a/drivers/irqchip/irq-renesas-intc-irqpin.c
+++ b/drivers/irqchip/irq-renesas-intc-irqpin.c
@@ -30,6 +30,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/pm_runtime.h>
@@ -40,7 +41,9 @@
#define INTC_IRQPIN_REG_SOURCE 2 /* INTREQnn */
#define INTC_IRQPIN_REG_MASK 3 /* INTMSKnn */
#define INTC_IRQPIN_REG_CLEAR 4 /* INTMSKCLRnn */
-#define INTC_IRQPIN_REG_NR 5
+#define INTC_IRQPIN_REG_NR_MANDATORY 5
+#define INTC_IRQPIN_REG_IRLM 5 /* ICR0 with IRLM bit (optional) */
+#define INTC_IRQPIN_REG_NR 6
/* INTC external IRQ PIN hardware register access:
*
@@ -82,6 +85,10 @@ struct intc_irqpin_priv {
u8 shared_irq_mask;
};
+struct intc_irqpin_irlm_config {
+ unsigned int irlm_bit;
+};
+
static unsigned long intc_irqpin_read32(void __iomem *iomem)
{
return ioread32(iomem);
@@ -345,10 +352,23 @@ static struct irq_domain_ops intc_irqpin_irq_domain_ops = {
.xlate = irq_domain_xlate_twocell,
};
+static const struct intc_irqpin_irlm_config intc_irqpin_irlm_r8a7779 = {
+ .irlm_bit = 23, /* ICR0.IRLM0 */
+};
+
+static const struct of_device_id intc_irqpin_dt_ids[] = {
+ { .compatible = "renesas,intc-irqpin", },
+ { .compatible = "renesas,intc-irqpin-r8a7779",
+ .data = &intc_irqpin_irlm_r8a7779 },
+ {},
+};
+MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids);
+
static int intc_irqpin_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct renesas_intc_irqpin_config *pdata = dev->platform_data;
+ const struct of_device_id *of_id;
struct intc_irqpin_priv *p;
struct intc_irqpin_iomem *i;
struct resource *io[INTC_IRQPIN_REG_NR];
@@ -391,10 +411,11 @@ static int intc_irqpin_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
- /* get hold of manadatory IOMEM */
+ /* get hold of register banks */
+ memset(io, 0, sizeof(io));
for (k = 0; k < INTC_IRQPIN_REG_NR; k++) {
io[k] = platform_get_resource(pdev, IORESOURCE_MEM, k);
- if (!io[k]) {
+ if (!io[k] && k < INTC_IRQPIN_REG_NR_MANDATORY) {
dev_err(dev, "not enough IOMEM resources\n");
ret = -EINVAL;
goto err0;
@@ -422,6 +443,10 @@ static int intc_irqpin_probe(struct platform_device *pdev)
for (k = 0; k < INTC_IRQPIN_REG_NR; k++) {
i = &p->iomem[k];
+ /* handle optional registers */
+ if (!io[k])
+ continue;
+
switch (resource_size(io[k])) {
case 1:
i->width = 8;
@@ -448,6 +473,19 @@ static int intc_irqpin_probe(struct platform_device *pdev)
}
}
+ /* configure "individual IRQ mode" where needed */
+ of_id = of_match_device(intc_irqpin_dt_ids, dev);
+ if (of_id && of_id->data) {
+ const struct intc_irqpin_irlm_config *irlm_config = of_id->data;
+
+ if (io[INTC_IRQPIN_REG_IRLM])
+ intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_IRLM,
+ irlm_config->irlm_bit,
+ 1, 1);
+ else
+ dev_warn(dev, "unable to select IRLM mode\n");
+ }
+
/* mask all interrupts using priority */
for (k = 0; k < p->number_of_irqs; k++)
intc_irqpin_mask_unmask_prio(p, k, 1);
@@ -550,12 +588,6 @@ static int intc_irqpin_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id intc_irqpin_dt_ids[] = {
- { .compatible = "renesas,intc-irqpin", },
- {},
-};
-MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids);
-
static struct platform_driver intc_irqpin_device_driver = {
.probe = intc_irqpin_probe,
.remove = intc_irqpin_remove,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists