linux-kernel - Re: [PATCH v2 2/2] leds: add Qualcomm PM8941 WLED driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 17 Feb 2015 15:02:00 -0800
From:	Bjorn Andersson <bjorn@...o.se>
To:	Stephen Boyd <sboyd@...eaurora.org>
Cc:	Bjorn Andersson <bjorn.andersson@...ymobile.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Bryan Wu <cooloney@...il.com>,
	Richard Purdie <rpurdie@...ys.net>,
	Grant Likely <grant.likely@...aro.org>,
	Courtney Cavin <courtney.cavin@...ymobile.com>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	Linux LED Subsystem <linux-leds@...r.kernel.org>,
	linux-arm-msm <linux-arm-msm@...r.kernel.org>
Subject: Re: [PATCH v2 2/2] leds: add Qualcomm PM8941 WLED driver

On Thu, Feb 12, 2015 at 8:26 PM, Stephen Boyd <sboyd@...eaurora.org> wrote:
> On 01/23/15 16:54, Bjorn Andersson wrote:
>> +
>> +static int pm8941_wled_set(struct led_classdev *cdev,
>> +                        enum led_brightness value)
>> +{
>> +     struct pm8941_wled *wled;
>> +     u8 ctrl = 0;
>> +     u16 val;
>> +     int rc;
>> +     int i;
>> +
>> +     wled = container_of(cdev, struct pm8941_wled, cdev);
>> +
>> +     if (value != 0)
>> +             ctrl = PM8941_WLED_REG_MOD_EN_BIT;
>> +
>> +     val = value * PM8941_WLED_REG_VAL_MAX / LED_FULL;
>> +
>> +     rc = regmap_update_bits(wled->regmap,
>> +                     wled->addr + PM8941_WLED_REG_MOD_EN,
>> +                     PM8941_WLED_REG_MOD_EN_MASK, ctrl);
>> +     if (rc)
>> +             return rc;
>> +
>> +     for (i = 0; i < wled->cfg.num_strings; ++i) {
>> +             u8 v[2] = { val & 0xff, (val >> 8) & 0xf };
>> +
>> +             rc = regmap_bulk_write(wled->regmap,
>> +                             wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i,
>> +                             v, 2);
>> +             if (rc)
>> +                     return rc;
>> +     }
>> +
>> +     rc = regmap_update_bits(wled->regmap,
>> +                     wled->addr + PM8941_WLED_REG_SYNC,
>> +                     PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL);
>> +     if (rc)
>> +             return rc;
>> +
>> +     rc = regmap_update_bits(wled->regmap,
>> +                     wled->addr + PM8941_WLED_REG_SYNC,
>> +                     PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR);
>> +     return rc;
>> +}
>
> This doesn't seem to do anything for the OVP spike mentioned in this
> patch[1]. Do you see that problem on your device? I imagine the PMIC is
> the same.
>
> [1]
> https://www.codeaurora.org/cgit/quic/la/kernel/msm/commit/?id=fef9e15072562f0f28dc7066dcdd69388df81ed3
>

That's odd, I can't find that fix in any officially supported releases
for 8974 - which Courtney used as reference for this driver.

Just to make sure I understand the solution; when disabling the sinks
the over-voltage-protection sometimes triggers, so we should detect
that and reset the ovp configuration?

I presume the side effect would be that the sinks would not give any
output until this is done?

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/