lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 16 Feb 2015 23:22:54 -0400
From:	Eduardo Valentin <edubezval@...il.com>
To:	Mikko Perttunen <mikko.perttunen@...si.fi>
Cc:	Rui Zhang <rui.zhang@...el.com>,
	ezequiel.garcia@...e-electrons.com, amit.kachhap@...aro.org,
	viresh.kumar@...aro.org, amit.daniel@...sung.com,
	hongbo.zhang@...aro.com, andrew@...n.ch, durgadoss.r@...el.com,
	peter@...e.net, shawn.guo@...aro.org, aaron.lu@...el.com,
	caesar.wang@...k-chips.com, b.zolnierkie@...sung.com,
	l.majewski@...sung.com, vincenzo.frascino@...com,
	mperttunen@...dia.com, srinivas.pandruvada@...ux.intel.com,
	jacob.jun.pan@...ux.intel.com, bcousson@...libre.com,
	LKML <linux-kernel@...r.kernel.org>,
	Linux PM <linux-pm@...r.kernel.org>
Subject: Re: [PATCH RFC 02/12] Documentation: thermal docbook: add glossary

Terve Mikko,

On Mon, Feb 16, 2015 at 03:01:25PM +0200, Mikko Perttunen wrote:
> On 02/09/2015 11:34 PM, Eduardo Valentin wrote:
> > This change introduces a section in the Introduction Chapter to
> > list concepts used by the Thermal Framework.
> >
> > Signed-off-by: Eduardo Valentin <edubezval@...il.com>
> > ---
> >   Documentation/DocBook/thermal.tmpl | 129 ++++++++++++++++++++++++++++++++++++-
> >   1 file changed, 128 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/DocBook/thermal.tmpl b/Documentation/DocBook/thermal.tmpl
> > index f8fb8a2..66efed3 100644
> > --- a/Documentation/DocBook/thermal.tmpl
> > +++ b/Documentation/DocBook/thermal.tmpl
> > @@ -84,5 +84,132 @@
> >   		devices.
> >   		</para>
> >
> > -  </chapter>
> > +		<sect1 id="glossary">
> > +			<title>Glossary</title>
> > +			<para>The Linux Kernel Thermal Framework  uses a
> > +			specific terminology to represent the entities involved
> > +			in thermal constrained environments. This section
> > +			summaries the terminology as dictionary. These terms are
> > +			in use within the present document and in the source
> > +			code of the Linux Kernel Thermal Framework.
> > +			</para>
> > +			<glossary>
> > +				<glossentry>
> > +					<glossterm>Thermal Zone</glossterm>
> > +					<glossdef>
> > +						<para>Thermal zones represent
> > +						what is the current status of a
> > +						thermal constrained zone in the
> > +						hardware. The zone usually is a
> > +						device or component. The status
> > +						of a thermal zone is mainly with
> > +						respect to temperature.
> > +						Currently, the Linux Kernel
> > +						Thermal Framework represents
> > +						temperature in miliCelsius. The
> 
> milli-Celsius or millicelsius. Same change later too.

OK. I will standardize.

> 
> > +						current abstraction covers for
> > +						non negative temperatures and
> > +						constraints.
> > +						</para>
> > +					</glossdef>
> > +				</glossentry>
> > +				<glossentry>
> > +					<glossterm>Thermal Sensors</glossterm>
> > +					<glossdef>
> > +						<para>Thermal sensors provide
> > +						temperature sensing capabilities
> > +						on thermal zones. Typical
> > +						devices are I2C ADC converters
> > +						and bandgaps. These are nodes
> > +						providing temperature data to
> > +						thermal zones. Thermal sensor
> > +						devices may control one or more
> > +						internal sensors.
> > +						</para>
> > +					</glossdef>
> > +				</glossentry>
> > +				<glossentry>
> > +					<glossterm>Trips Points</glossterm>
> > +					<glossdef>
> > +						<para>The trip node describes a
> > +						point in the temperature domain
> > +						in which the system takes an
> > +						action. This item describes just
> > +						the point, not the action. Trip
> > +						points are represented as
> > +						temperature in miliCelsius. The
> 
> here
> 
> > +						current abstraction covers for
> > +						non negative temperatures.
> 
> One thing I'd also like to see documented is the roles of the different 
> trip types (PASSIVE, ACTIVE, HOT, CRITICAL) and when each should be used.

OK. That makes sense to me. I will include either a chapter about
thermal zones and have a section about it, or include in here, in the
glossary. I will think about it.

Thanks for your thoughts!

> 
> > +						</para>
> > +					</glossdef>
> > +				</glossentry>
> > +				<glossentry>
> > +					<glossterm>Thermal Governor</glossterm>
> > +					<glossdef>
> > +						<para>Thermal Governors
> > +						represent a policy to manage the
> > +						thermal zone device temperature.
> > +						The governor targets to keep
> > +						temperature in an acceptable
> > +						range which correlates to the
> > +						power budget, while maximizing
> > +						the performance. Governors can
> > +						be implemented in Kernel Space
> > +						or in User Space.
> > +						</para>
> > +					</glossdef>
> > +				</glossentry>
> > +				<glossentry>
> > +					<glossterm>Thermal Cooling Device</glossterm>
> > +					<glossdef>
> > +						<para>Cooling devices provide
> > +						control on power dissipation.
> > +						There are essentially two ways
> > +						to provide control on power
> > +						dissipation. First is by means
> > +						of regulating device
> > +						performance, which is known as
> > +						passive cooling. A typical
> > +						passive cooling is a CPU that
> > +						has dynamic voltage and
> > +						frequency scaling (DVFS), and
> > +						uses lower frequencies as
> > +						cooling states. Second is by
> > +						means of activating devices in
> > +						order to remove the dissipated
> > +						heat, which is known as active
> > +						cooling, e.g. regulating fan
> > +						speeds. In both cases, cooling
> > +						devices shall have a way to
> > +						determine the state of cooling
> > +						in which the device is.
> > +				</para>
> > +					</glossdef>
> > +				</glossentry>
> > +				<glossentry>
> > +					<glossterm>Cooling State</glossterm>
> > +					<glossdef>
> > +						<para>Any cooling device has a
> > +						range of cooling states (i.e.
> > +						different levels of heat
> > +						dissipation). For example a
> > +						fan's cooling states correspond
> > +						to the different fan speeds
> > +						possible. Cooling states are
> > +						referred to by single unsigned
> > +						integers, where larger numbers
> > +						mean greater heat dissipation.
> > +						The precise set of cooling
> > +						states associated with a device
> > +						(as referred to be the
> > +						cooling-min-state and
> > +						cooling-max-state properties)
> > +						should be defined in a
> > +						particular device's binding.
> > +						</para>
> > +					</glossdef>
> > +				</glossentry>
> > +			</glossary>
> > +		</sect1>
> > +	</chapter>
> >   </book>
> >
> 
> Cheers,
> Mikko.
> 

Download attachment "signature.asc" of type "application/pgp-signature" (474 bytes)

Powered by blists - more mailing lists