lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1424457403-6669-1-git-send-email-robert.jarzmik@free.fr>
Date:	Fri, 20 Feb 2015 19:36:43 +0100
From:	Robert Jarzmik <robert.jarzmik@...e.fr>
To:	Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>,
	David Woodhouse <dwmw2@...radead.org>,
	Brian Norris <computersforpeace@...il.com>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc:	linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Robert Jarzmik <robert.jarzmik@...e.fr>
Subject: [PATCH v2] mtd: pxa3xx-nand: handle PIO in threaded interrupt

Change the handling of the data stage in the driver : don't pump data in
the top-half interrupt, but rather schedule a thread for non dma cases.

This will enable latencies in the data pumping, especially if delays are
required. Moreover platform shall be more reactive as other interrupts
can be served while pumping data.

No throughput degradation was observed, at least on the zylonite
platform, while a slight degradation was being expected.

Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
Tested-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
Since v1: use IRQF_ONESHOT per Maxime's comment
---
 drivers/mtd/nand/pxa3xx_nand.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 96b0b1d..7ff5202 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -569,11 +569,24 @@ static void start_data_dma(struct pxa3xx_nand_info *info)
 {}
 #endif
 
+static irqreturn_t pxa3xx_nand_irq_thread(int irq, void *data)
+{
+	struct pxa3xx_nand_info *info = data;
+
+	handle_data_pio(info);
+
+	info->state = STATE_CMD_DONE;
+	nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 {
 	struct pxa3xx_nand_info *info = devid;
 	unsigned int status, is_completed = 0, is_ready = 0;
 	unsigned int ready, cmd_done;
+	irqreturn_t ret = IRQ_HANDLED;
 
 	if (info->cs == 0) {
 		ready           = NDSR_FLASH_RDY;
@@ -615,7 +628,8 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 		} else {
 			info->state = (status & NDSR_RDDREQ) ?
 				      STATE_PIO_READING : STATE_PIO_WRITING;
-			handle_data_pio(info);
+			ret = IRQ_WAKE_THREAD;
+			goto NORMAL_IRQ_EXIT;
 		}
 	}
 	if (status & cmd_done) {
@@ -656,7 +670,7 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 	if (is_ready)
 		complete(&info->dev_ready);
 NORMAL_IRQ_EXIT:
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static inline int is_buf_blank(uint8_t *buf, size_t len)
@@ -1672,7 +1686,9 @@ static int alloc_nand_resource(struct platform_device *pdev)
 	/* initialize all interrupts to be disabled */
 	disable_int(info, NDSR_MASK);
 
-	ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info);
+	ret = request_threaded_irq(irq, pxa3xx_nand_irq,
+				   pxa3xx_nand_irq_thread, IRQF_ONESHOT,
+				   pdev->name, info);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
 		goto fail_free_buf;
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ