[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <54F652E7.4080104@broadcom.com>
Date: Tue, 3 Mar 2015 16:33:43 -0800
From: Arun Ramamurthy <arun.ramamurthy@...adcom.com>
To: Rob Herring <robherring2@...il.com>
CC: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
"Mark Rutland" <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"Russell King" <linux@....linux.org.uk>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Tomi Valkeinen <tomi.valkeinen@...com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-fbdev@...r.kernel.org" <linux-fbdev@...r.kernel.org>,
Dmitry Torokhov <dtor@...gle.com>,
Anatol Pomazau <anatol@...gle.com>,
Jonathan Richardson <jonathar@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Ray Jui <rjui@...adcom.com>,
<bcm-kernel-feedback-list@...adcom.com>
Subject: Re: [PATCH] video: ARM CLCD: Added support for FBIO_WAITFORVSYNC
On 15-03-02 03:29 PM, Rob Herring wrote:
> On Wed, Feb 25, 2015 at 3:01 PM, Arun Ramamurthy
> <arun.ramamurthy@...adcom.com> wrote:
>> Added ioctl and interrupt handler functions to support FBIO_WAITFORVSYNC
>> Also corrected documentation to make interrupts and interrupt-names
>> optional as they are not required properties.
>>
>> Reviewed-by: Ray Jui <rjui@...adcom.com>
>> Reviewed-by: Scott Branden <sbranden@...adcom.com>
>> Signed-off-by: Arun Ramamurthy <arun.ramamurthy@...adcom.com>0
>> ---
>> .../devicetree/bindings/video/arm,pl11x.txt | 11 +--
>
> Please split bindings to separate patches.
Rob, I looked at the history of patches to this driver and all them
included changes to the documentation in the same patch so I followed a
similar model. I assumed that a separate patch was only required when
the documentation was being added from scratch and not when modifying a
few lines. Is this not the case?
>
>> drivers/video/fbdev/amba-clcd.c | 82 ++++++++++++++++++++++
>> include/linux/amba/clcd.h | 4 ++
>> 3 files changed, 89 insertions(+), 8 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/video/arm,pl11x.txt b/Documentation/devicetree/bindings/video/arm,pl11x.txt
>> index 2262cdb..7d19024 100644
>> --- a/Documentation/devicetree/bindings/video/arm,pl11x.txt
>> +++ b/Documentation/devicetree/bindings/video/arm,pl11x.txt
>> @@ -10,14 +10,6 @@ Required properties:
>>
>> - reg: base address and size of the control registers block
>>
>> -- interrupt-names: either the single entry "combined" representing a
>> - combined interrupt output (CLCDINTR), or the four entries
>> - "mbe", "vcomp", "lnbu", "fuf" representing the individual
>> - CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
>> -
>> -- interrupts: contains an interrupt specifier for each entry in
>> - interrupt-names
>> -
>> - clock-names: should contain "clcdclk" and "apb_pclk"
>>
>> - clocks: contains phandle and clock specifier pairs for the entries
>> @@ -54,6 +46,9 @@ Optional properties:
>> It can be used to configure a virtual y resolution. It
>> must be a value larger than the actual y resolution.
>>
>> +- interrupts: contains an interrupt specifier for the clcd vcomp interrupt
>> + This is required for the driver to handle FBIO_WAITFORVSYNC ioctls.
>> +
>
> What happened to interrupt-names?
As mentioned before, these changes to the documentation will be undone
in V2. Thanks
>
> Rob
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists