[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGTfZH3Sz5tfsCNUoaMuZp7TyGnB3keZWksdHcHVF=t=u2RkKQ@mail.gmail.com>
Date: Fri, 20 Mar 2015 05:50:40 +0900
From: Chanwoo Choi <cwchoi00@...il.com>
To: Roger Quadros <rogerq@...com>
Cc: George Cherian <gcherianv@...il.com>,
Robert Baldyga <r.baldyga@...sung.com>,
Felipe Balbi <balbi@...com>,
Greg KH <gregkh@...uxfoundation.org>,
"myungjoo.ham@...sung.com" <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
linux-usb@...r.kernel.org,
linux-kernel <linux-kernel@...r.kernel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Ćukasz Stelmach <l.stelmach@...sung.com>
Subject: Re: [RFC 01/19] extcon: add extcon-odroid-usbotg driver
Hi Roger,
On Thu, Mar 19, 2015 at 11:45 PM, Roger Quadros <rogerq@...com> wrote:
> On 19/03/15 14:19, George Cherian wrote:
>> Hi Robert,
>>
>> +Roger
>> On Thu, Mar 19, 2015 at 5:37 PM, Robert Baldyga <r.baldyga@...sung.com> wrote:
>>> Hi George,
>>>
>>> On 03/19/2015 09:50 AM, George Cherian wrote:
>>>> Hi Robert,
>>>>
>>>> This looks like a extcon driver based on gpio for USB.
>>>>
>>>> Roger posted a generic one a while back.
>>>> https://lkml.org/lkml/2015/2/2/187
>>>>
>>>> Doesn't this serve the purpose rather than adding this driver?
>>>
>>> Roger's driver doesn't support VBUS state detection so it cannot handle
>> I feel Roger's driver could be extended for supporting VBUS.
>> Also I think Roger's driver is about to get merged.
>> Probably, Roger or Chanwoo can better tell that
>
> It is already queued for 4.1 and is available in linux-next.
>
>>
>>> situation when USB cable is unpluged. In addition some of Odroid boards
>>> has only VBUS detection (without ID pin), so this driver cannot handle
>>> them at all.
>
> why not?
>
> x15-beagleboard also gets VBUS event over GPIO and I was planning to extent it
> to support VBUS detection.
Sounds good to me to extent extcon-usb-gpio.c.
I'd like to hold only one extcon driver to support both USB and
USB-HOST with gpio .
There are one more extcon-gpio driver in mailing list as following:
- extcon-usb-gpio.c (will be merged to Linux 4.1)
- extcon-odroid-usbotg.c
- extcon-otg_gpio.c [1]
[1] https://lkml.org/lkml/2015/2/19/411
The each extcon gpio driver support both USB/USB-HOST cable by using
different way,
Because some board which detect USB/USB-HOST by gpio have a little
different pin composition
I think only one extcon driver can support all cases with optional properties.
Roger,
I'd like you to share your plan to extent the extcon-usb-gpio.c for
removing duplicate work.
[snip]
Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists