[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1427856743-26625-2-git-send-email-alexandre.belloni@free-electrons.com>
Date: Wed, 1 Apr 2015 04:52:22 +0200
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Philippe De Muyter <phdm@...qel.be>
Cc: Alessandro Zummo <a.zummo@...ertech.it>,
rtc-linux@...glegroups.com, linux-kernel@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
devicetree-discuss@...ts.ozlabs.org
Subject: [PATCH v2 1/2] Documentation: bindings: add abracon,abx80x
Document the bindings for abracon,abx80x and related compatibles.
Cc: devicetree-discuss@...ts.ozlabs.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
.../devicetree/bindings/rtc/abracon,abx80x.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
new file mode 100644
index 000000000000..6f0d3b2cdd89
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
@@ -0,0 +1,32 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+ "abracon,abx80x"
+ "abracon,ab0801"
+ "abracon,ab0803"
+ "abracon,ab0804"
+ "abracon,ab0805"
+ "abracon,ab1801"
+ "abracon,ab1803"
+ "abracon,ab1804"
+ "abracon,ab1805"
+ Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+ resistor, the other values are in ohm.
+
+
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists