Date:	Fri, 10 Apr 2015 17:45:30 +0900
From:	Ingi Kim <ingi2.kim@...sung.com>
To:	Sakari Ailus <sakari.ailus@....fi>
Cc:	cooloney@...il.com, rpurdie@...ys.net, robh+dt@...nel.org,
	pawel.moll@....com, mark.rutland@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
	j.anaszewski@...sung.com, varkabhadram@...il.com, joe@...ches.com,
	sw0312.kim@...sung.com, cw00.choi@...sung.com,
	jh80.chung@...sung.com, ideal.song@...sung.com,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-leds@...r.kernel.org
Subject: Re: [PATCH v6 3/3] leds: Add ktd2692 flash LED driver

Hi Sakari,

Thanks for the review.
I'm also anticipated decision for flash properties.

On 2015년 04월 10일 17:11, Sakari Ailus wrote:
> Hi Ingi,
> 
> Thanks for the update. Just a few comments below. Let's also wait for the
> final agreement on the limit properties, hopefully we have that soon.
> 
> On Fri, Apr 10, 2015 at 03:45:59PM +0900, Ingi Kim wrote:
>> This patch adds a driver to support the ktd2692 flash LEDs.
>> ktd2692 can control flash current by ExpressWire interface.
>>
>> Signed-off-by: Ingi Kim <ingi2.kim@...sung.com>
>> ---
>>  drivers/leds/Kconfig        |   9 +
>>  drivers/leds/Makefile       |   1 +
>>  drivers/leds/leds-ktd2692.c | 408 ++++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 418 insertions(+)
>>  create mode 100644 drivers/leds/leds-ktd2692.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 51059bb..86197ef 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -505,6 +505,15 @@ config LEDS_MENF21BMC
>>  	  This driver can also be built as a module. If so the module
>>  	  will be called leds-menf21bmc.
>>  
>> +config LEDS_KTD2692
>> +	tristate "KTD2692 LED flash support"
>> +	depends on LEDS_CLASS_FLASH && GPIOLIB
>> +	help
>> +	  This option enables support for KTD2692 LED flash connected
>> +	  through ExpressWire interface.
>> +
>> +	  Say Y to enable this driver.
>> +
>>  comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
>>  
>>  config LEDS_BLINKM
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index a739ae2..ed5ed79 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -59,6 +59,7 @@ obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
>>  obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
>>  obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
>>  obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
>> +obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
>>  
>>  # LED SPI Drivers
>>  obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
>> diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
>> new file mode 100644
>> index 0000000..a9e4862
>> --- /dev/null
>> +++ b/drivers/leds/leds-ktd2692.c
>> @@ -0,0 +1,408 @@
>> +/*
>> + * LED driver : leds-ktd2692.c
>> + *
>> + * Copyright (C) 2015 Samsung Electronics
>> + * Ingi Kim <ingi2.kim@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/led-class-flash.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of_gpio.h>
> 
> Shouldn't this be linux/of.h?
> 

I think it is enough to include of_gpio
because it includes linux/of and linux/gpio
but I should change for using new gpio APIs

>> +#include <linux/platform_device.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/workqueue.h>
>> +
>> +/* Value related the flash mode */
>> +#define KTD2692_FLASH_MODE_TIMEOUT_LEVELS	8
>> +#define KTD2692_FLASH_MODE_TIMEOUT_DISABLE	0
>> +#define KTD2692_FLASH_MODE_TIMEOUT_DEFAULT_US	1049000
>> +#define KTD2692_FLASH_MODE_TIMEOUT_MAX_US	1835000
>> +#define KTD2692_FLASH_MODE_CURR_PERCENT(x)	(((x) * 16) / 100)
>> +
>> +/* Macro for getting offset of flash timeout */
>> +#define GET_TIMEOUT_OFFSET(timeout, step)	((timeout) / (step))
>> +
>> +/* Adjust a multiple of brightness */
>> +#define KTD2692_BRIGHTNESS_RANGE_255_TO_16(x)	(((x) >> 4) & 0x0F)
>> +#define KTD2692_BRIGHTNESS_RANGE_255_TO_8(x)	(((x) >> 5) & 0x0F)
>> +#define KTD2692_BRIGHTNESS_RANGE_255_TO_4(x)	(((x) >> 6) & 0x0F)
>> +
>> +/* Base register address */
>> +#define KTD2692_REG_LVP_BASE			0x00
>> +#define KTD2692_REG_FLASH_TIMEOUT_BASE		0x20
>> +#define KTD2692_REG_MIN_CURRENT_SET_BASE	0x40
>> +#define KTD2692_REG_MOVIE_CURRENT_BASE		0x60
>> +#define KTD2692_REG_FLASH_CURRENT_BASE		0x80
>> +#define KTD2692_REG_MODE_BASE			0xA0
>> +
>> +/* Set bit coding time for expresswire interface */
>> +#define KTD2692_TIME_RESET_US			700
>> +#define KTD2692_TIME_DATA_START_TIME_US		10
>> +#define KTD2692_TIME_HIGH_END_OF_DATA_US	350
>> +#define KTD2692_TIME_LOW_END_OF_DATA_US		10
>> +#define KTD2692_TIME_SHORT_BITSET_US		4
>> +#define KTD2692_TIME_LONG_BITSET_US		12
>> +
>> +/* KTD2692 default length of name */
>> +#define KTD2692_NAME_LENGTH			20
>> +
>> +enum ktd2692_bitset {
>> +	KTD2692_LOW = 0,
>> +	KTD2692_HIGH,
>> +};
>> +
>> +/* Movie / Flash Mode Control */
>> +enum ktd2692_led_mode {
>> +	KTD2692_MODE_DISABLE = 0,	/* default */
>> +	KTD2692_MODE_MOVIE,
>> +	KTD2692_MODE_FLASH,
>> +};
>> +
>> +struct ktd2692_context {
>> +	/* Related LED Flash class device */
>> +	struct led_classdev_flash fled_cdev;
>> +
>> +	struct mutex lock;
>> +	struct regulator *regulator;
>> +	struct work_struct work_brightness_set;
>> +
>> +	int aux_gpio;
>> +	int ctrl_gpio;
>> +
>> +	enum ktd2692_led_mode mode;
>> +	enum led_brightness torch_brightness;
>> +};
>> +
>> +static struct ktd2692_context *fled_cdev_to_led(
>> +				struct led_classdev_flash *fled_cdev)
>> +{
>> +	return container_of(fled_cdev, struct ktd2692_context, fled_cdev);
>> +}
>> +
>> +static void ktd2692_expresswire_start(struct ktd2692_context *led)
>> +{
>> +	gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
>> +	udelay(KTD2692_TIME_DATA_START_TIME_US);
>> +}
>> +
>> +static void ktd2692_expresswire_reset(struct ktd2692_context *led)
>> +{
>> +	gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
>> +	udelay(KTD2692_TIME_RESET_US);
>> +}
>> +
>> +static void ktd2692_expresswire_end(struct ktd2692_context *led)
>> +{
>> +	gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
>> +	udelay(KTD2692_TIME_LOW_END_OF_DATA_US);
>> +	gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
>> +	udelay(KTD2692_TIME_HIGH_END_OF_DATA_US);
>> +}
>> +
>> +static void ktd2692_expresswire_set_bit(struct ktd2692_context *led, bool bit)
>> +{
>> +	/*
>> +	 * The Low Bit(0) and High Bit(1) is based on a time detection
>> +	 * algorithm between time low and time high
>> +	 * Time_(L_LB) : Low time of the Low Bit(0)
>> +	 * Time_(H_LB) : High time of the LOW Bit(0)
>> +	 * Time_(L_HB) : Low time of the High Bit(1)
>> +	 * Time_(H_HB) : High time of the High Bit(1)
>> +	 *
>> +	 * It can be simplified to:
>> +	 * Low Bit(0) : 2 * Time_(H_LB) < Time_(L_LB)
>> +	 * High Bit(1) : 2 * Time_(L_HB) < Time_(H_HB)
>> +	 * HIGH  ___           ____    _..     _________    ___
>> +	 *          |_________|    |_..  |____|         |__|
>> +	 * LOW        <L_LB>  <H_LB>     <L_HB>  <H_HB>
>> +	 *          [  Low Bit (0) ]     [  High Bit(1) ]
>> +	 */
>> +	if (bit) {
>> +		gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
>> +		udelay(KTD2692_TIME_SHORT_BITSET_US);
>> +		gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
>> +		udelay(KTD2692_TIME_LONG_BITSET_US);
>> +	} else {
>> +		gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
>> +		udelay(KTD2692_TIME_LONG_BITSET_US);
>> +		gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
>> +		udelay(KTD2692_TIME_SHORT_BITSET_US);
>> +	}
>> +}
>> +
>> +static void ktd2692_expresswire_write(struct ktd2692_context *led, u8 value)
>> +{
>> +	int i;
>> +
>> +	ktd2692_expresswire_start(led);
>> +	for (i = 7; i >= 0; i--)
>> +		ktd2692_expresswire_set_bit(led, value & BIT(i));
>> +	ktd2692_expresswire_end(led);
>> +}
>> +
>> +static void ktd2692_brightness_set(struct ktd2692_context *led,
>> +					enum led_brightness brightness)
>> +{
>> +	mutex_lock(&led->lock);
>> +
>> +	if (brightness == LED_OFF) {
>> +		led->mode = KTD2692_MODE_DISABLE;
>> +		gpio_set_value(led->aux_gpio, KTD2692_LOW);
>> +	} else {
>> +		ktd2692_expresswire_write(led, KTD2692_REG_MOVIE_CURRENT_BASE |
>> +				KTD2692_BRIGHTNESS_RANGE_255_TO_8(brightness));
>> +		led->mode = KTD2692_MODE_MOVIE;
>> +	}
>> +
>> +	ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
>> +	mutex_unlock(&led->lock);
>> +}
>> +
>> +static void ktd2692_brightness_set_work(struct work_struct *work)
>> +{
>> +	struct ktd2692_context *led =
>> +		container_of(work, struct ktd2692_context, work_brightness_set);
>> +
>> +	ktd2692_brightness_set(led, led->torch_brightness);
>> +}
>> +
>> +static void ktd2692_led_brightness_set(struct led_classdev *led_cdev,
>> +					enum led_brightness brightness)
>> +{
>> +	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> +	struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
>> +
>> +	led->torch_brightness = brightness;
>> +	schedule_work(&led->work_brightness_set);
>> +}
>> +
>> +static int ktd2692_led_brightness_set_sync(struct led_classdev *led_cdev,
>> +					enum led_brightness brightness)
>> +{
>> +	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> +	struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
>> +
>> +	ktd2692_brightness_set(led, brightness);
>> +
>> +	return 0;
>> +}
>> +
>> +static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
>> +						bool state)
>> +{
>> +	struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
>> +	struct led_flash_setting *timeout = &fled_cdev->timeout;
>> +	u32 flash_tm_reg;
>> +
>> +	mutex_lock(&led->lock);
>> +
>> +	if (state == 0) {
>> +		led->mode = KTD2692_MODE_DISABLE;
>> +		gpio_set_value(led->aux_gpio, KTD2692_LOW);
>> +	} else {
>> +		flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step);
>> +		ktd2692_expresswire_write(led, flash_tm_reg
>> +				| KTD2692_REG_FLASH_TIMEOUT_BASE);
>> +
>> +		led->mode = KTD2692_MODE_FLASH;
>> +		gpio_set_value(led->aux_gpio, KTD2692_HIGH);
>> +	}
>> +
>> +	ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
>> +
>> +	fled_cdev->led_cdev.brightness = LED_OFF;
>> +	led->mode = KTD2692_MODE_DISABLE;
>> +
>> +	mutex_unlock(&led->lock);
>> +
>> +	return 0;
>> +}
>> +
>> +static int ktd2692_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
>> +						u32 timeout)
>> +{
>> +	return 0;
>> +}
>> +
>> +static void ktd2692_init_flash_timeout(u32 flash_timeout_us,
>> +					struct led_flash_setting *setting)
>> +{
>> +	setting->min = KTD2692_FLASH_MODE_TIMEOUT_DISABLE;
>> +	setting->max = KTD2692_FLASH_MODE_TIMEOUT_MAX_US;
>> +	setting->step = KTD2692_FLASH_MODE_TIMEOUT_MAX_US
>> +			/ (KTD2692_FLASH_MODE_TIMEOUT_LEVELS - 1);
>> +	setting->val = flash_timeout_us;
>> +}
>> +
>> +static void ktd2692_setup(struct ktd2692_context *led)
>> +{
>> +	led->mode = KTD2692_MODE_DISABLE;
>> +	ktd2692_expresswire_reset(led);
>> +	gpio_set_value(led->aux_gpio, KTD2692_LOW);
>> +
>> +	ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
>> +					 | KTD2692_REG_FLASH_CURRENT_BASE);
>> +}
>> +
>> +static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
>> +				u32 *flash_timeout_us)
>> +{
>> +	struct device_node *np = dev->of_node;
>> +	struct device_node *child_node;
>> +	int ret;
>> +
>> +	if (!dev->of_node)
>> +		return -ENXIO;
>> +
>> +	led->ctrl_gpio = of_get_named_gpio(np, "ctrl-gpio", 0);
>> +	if (!gpio_is_valid(led->ctrl_gpio)) {
>> +		dev_err(dev, "no ctrl-gpio property found\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	led->aux_gpio = of_get_named_gpio(np, "aux-gpio", 0);
>> +	if (!gpio_is_valid(led->aux_gpio)) {
>> +		dev_err(dev, "no aux-gpio property found\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	ret = devm_gpio_request_one(dev, led->ctrl_gpio,
>> +					GPIOF_OPEN_SOURCE, "ctrl-gpio");
> 
> I think you could simply use devm_gpio_get(), and start using the new API
> instead. It'd save quite a few lines of code, too.
> 

did you mean devm_gpiod_get()
Ok, I'll check it

>> +	if (ret) {
>> +		dev_err(dev, "failed to request ctrl-gpio %d error %d\n",
>> +				led->ctrl_gpio, ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = devm_gpio_request_one(dev, led->aux_gpio,
>> +					GPIOF_OPEN_SOURCE, "aux-gpio");
>> +	if (ret) {
>> +		dev_err(dev, "failed to request aux-gpio %d error %d\n",
>> +				led->aux_gpio, ret);
>> +		return ret;
>> +	}
>> +
>> +	child_node = of_get_next_available_child(np, NULL);
>> +	if (!child_node) {
>> +		dev_err(dev, "No DT child node found for connected LED.\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	led->fled_cdev.led_cdev.name =
>> +		of_get_property(child_node, "label", NULL) ? : child_node->name;
>> +
>> +	ret = of_property_read_u32(child_node,
>> +				"flash-timeout-us", flash_timeout_us);
> 
> You should do of_node_put(child_node) once you no longer need it.
> 

Ok, I'll check it
Thanks for the notification of other APIs :)

>> +	/* default setting */
>> +	if (ret)
>> +		*flash_timeout_us = KTD2692_FLASH_MODE_TIMEOUT_DEFAULT_US;
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct led_flash_ops flash_ops = {
>> +	.strobe_set = ktd2692_led_flash_strobe_set,
>> +	.timeout_set = ktd2692_led_flash_timeout_set,
>> +};
>> +
>> +static int ktd2692_probe(struct platform_device *pdev)
>> +{
>> +	struct ktd2692_context *led;
>> +	struct led_classdev *led_cdev;
>> +	struct led_classdev_flash *fled_cdev;
>> +	struct led_flash_setting flash_timeout;
>> +	u32 flash_timeout_us;
>> +	int ret;
>> +
>> +	led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
>> +	if (!led)
>> +		return -ENOMEM;
>> +
>> +	fled_cdev = &led->fled_cdev;
>> +	led_cdev = &fled_cdev->led_cdev;
>> +
>> +	ret = ktd2692_parse_dt(led, &pdev->dev, &flash_timeout_us);
>> +	if (ret)
>> +		return ret;
>> +
>> +	led->regulator = devm_regulator_get(&pdev->dev, "vin");
>> +	if (IS_ERR(led->regulator)) {
>> +		dev_err(&pdev->dev, "regulator get failed\n");
>> +		return PTR_ERR(led->regulator);
>> +	}
>> +
>> +	ret = regulator_enable(led->regulator);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "Failed to enable supply: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ktd2692_init_flash_timeout(flash_timeout_us, &flash_timeout);
>> +
>> +	fled_cdev->timeout = flash_timeout;
>> +	fled_cdev->ops = &flash_ops;
>> +
>> +	led_cdev->brightness_set = ktd2692_led_brightness_set;
>> +	led_cdev->brightness_set_sync = ktd2692_led_brightness_set_sync;
>> +	led_cdev->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH;
>> +
>> +	mutex_init(&led->lock);
>> +	INIT_WORK(&led->work_brightness_set, ktd2692_brightness_set_work);
>> +
>> +	platform_set_drvdata(pdev, led);
>> +
>> +	ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "can't register LED %s\n", led_cdev->name);
>> +		mutex_destroy(&led->lock);
>> +		return ret;
>> +	}
>> +
>> +	ktd2692_setup(led);
>> +
>> +	return 0;
>> +}
>> +
>> +static int ktd2692_remove(struct platform_device *pdev)
>> +{
>> +	struct ktd2692_context *led = platform_get_drvdata(pdev);
>> +	int ret;
>> +
>> +	led_classdev_flash_unregister(&led->fled_cdev);
>> +	cancel_work_sync(&led->work_brightness_set);
>> +
>> +	ret = regulator_disable(led->regulator);
>> +	if (ret)
>> +		dev_err(&pdev->dev, "Failed to disable supply: %d\n", ret);
>> +
>> +	mutex_destroy(&led->lock);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id ktd2692_match[] = {
>> +	{ .compatible = "kinetic,ktd2692", },
>> +	{ /* sentinel */ },
>> +};
>> +
>> +static struct platform_driver ktd2692_driver = {
>> +	.driver = {
>> +		.name  = "ktd2692",
>> +		.of_match_table = ktd2692_match,
>> +	},
>> +	.probe  = ktd2692_probe,
>> +	.remove = ktd2692_remove,
>> +};
>> +
>> +module_platform_driver(ktd2692_driver);
>> +
>> +MODULE_AUTHOR("Ingi Kim <ingi2.kim@...sung.com>");
>> +MODULE_DESCRIPTION("Kinetic KTD2692 LED driver");
>> +MODULE_LICENSE("GPL v2");
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists