linux-kernel - [PATCH 3.16.y-ckt 059/144] usb: common: otg-fsm: only signal connect after switching to peripheral

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1429630329-21748-60-git-send-email-luis.henriques@canonical.com>
Date:	Tue, 21 Apr 2015 16:30:44 +0100
From:	Luis Henriques <luis.henriques@...onical.com>
To:	linux-kernel@...r.kernel.org, stable@...r.kernel.org,
	kernel-team@...ts.ubuntu.com
Cc:	Peter Chen <peter.chen@...escale.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Luis Henriques <luis.henriques@...onical.com>
Subject: [PATCH 3.16.y-ckt 059/144] usb: common: otg-fsm: only signal connect after switching to peripheral

3.16.7-ckt10 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@...escale.com>

commit a886bd92267c9e3d5c912860c6fb5a68479a7643 upstream.

We should signal connect (pull up dp) after we have already
at peripheral mode, otherwise, the dp may be toggled due to
we reset controller or do disconnect during the initialization
for peripheral, then, the host may be confused during the
enumeration, eg, it finds the reset can't succeed, but the
device is still there, see below error message.

hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 1-0:1.0: unable to enumerate USB device on port 1

Fixes: the issue existed when the otg fsm code was added.
Signed-off-by: Peter Chen <peter.chen@...escale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@...onical.com>
---
 drivers/usb/common/usb-otg-fsm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
index 98e8340a5bb1..c812fefe0e50 100644
--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -150,9 +150,9 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 		break;
 	case OTG_STATE_B_PERIPHERAL:
 		otg_chrg_vbus(fsm, 0);
-		otg_loc_conn(fsm, 1);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_GADGET);
+		otg_loc_conn(fsm, 1);
 		break;
 	case OTG_STATE_B_WAIT_ACON:
 		otg_chrg_vbus(fsm, 0);
@@ -213,10 +213,10 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
 
 		break;
 	case OTG_STATE_A_PERIPHERAL:
-		otg_loc_conn(fsm, 1);
 		otg_loc_sof(fsm, 0);
 		otg_set_protocol(fsm, PROTO_GADGET);
 		otg_drv_vbus(fsm, 1);
+		otg_loc_conn(fsm, 1);
 		otg_add_timer(fsm, A_BIDL_ADIS);
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/