| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150428115631.GA9169@x1>
Date: Tue, 28 Apr 2015 12:56:31 +0100
From: Lee Jones <lee.jones@...aro.org>
To: S Twiss <stwiss.opensource@...semi.com>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
DT <devicetree@...r.kernel.org>,
David Dajun Chen <david.chen@...semi.com>,
INPUT <linux-input@...r.kernel.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
LKML <linux-kernel@...r.kernel.org>,
Mark Rutland <mark.rutland@....com>,
Pawel Moll <pawel.moll@....com>,
Rob Herring <robh+dt@...nel.org>,
Support Opensource <support.opensource@...semi.com>
Subject: Re: [RESEND PATCH V2 1/2] input: misc: da9063: OnKey driver
On Fri, 17 Apr 2015, S Twiss wrote:
> From: Steve Twiss <stwiss.opensource@...semi.com>
>
> Add OnKey driver support for DA9063
>
>
> Signed-off-by: Steve Twiss <stwiss.opensource@...semi.com>
>
> ---
> Changes from PATCH V1 to V2
> ---------------------------
> - Remove the circular dependency comment in the main e-mail body
> linking PATCH V1 1/2 and 2/2
> - Alter the copyright header information to match expected GPLv2
> text from http://www.gnu.org/licenses/gpl-2.0.html
>
> This patch applies against linux-next and v4.0-rc6
>
>
> MAINTAINERS | 2 +-
> drivers/input/misc/Kconfig | 10 ++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/da9063-onkey.c | 228 ++++++++++++++++++++++++++++++++++++++
> drivers/mfd/da9063-core.c | 55 +++++++++
> include/linux/mfd/da9063/pdata.h | 1 +
This should be a seperate patch.
> 6 files changed, 296 insertions(+), 1 deletion(-)
> create mode 100644 drivers/input/misc/da9063-onkey.c
[...]
> diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
> index facd361..b6d6f18 100644
> --- a/drivers/mfd/da9063-core.c
> +++ b/drivers/mfd/da9063-core.c
> @@ -60,6 +60,7 @@ static struct resource da9063_rtc_resources[] = {
>
> static struct resource da9063_onkey_resources[] = {
> {
> + .name = "ONKEY",
> .start = DA9063_IRQ_ONKEY,
> .end = DA9063_IRQ_ONKEY,
> .flags = IORESOURCE_IRQ,
> @@ -97,6 +98,7 @@ static const struct mfd_cell da9063_devs[] = {
> .name = DA9063_DRVNAME_ONKEY,
> .num_resources = ARRAY_SIZE(da9063_onkey_resources),
> .resources = da9063_onkey_resources,
> + .of_compatible = "dlg,da9063-onkey",
> },
> {
> .name = DA9063_DRVNAME_RTC,
This is lowercase, so why does "ONKEY" have to be uppercase?
> @@ -109,12 +111,64 @@ static const struct mfd_cell da9063_devs[] = {
> },
> };
>
> +static int da9063_clear_fault_log(struct da9063 *da9063)
> +{
> + int ret = 0;
> + int fault_log = 0;
> +
> + ret = regmap_read(da9063->regmap, DA9063_REG_FAULT_LOG, &fault_log);
> + if (ret < 0) {
> + dev_err(da9063->dev, "Cannot read FAULT_LOG.\n");
> + return -EIO;
> + }
> +
> + if (fault_log) {
> + if (fault_log & DA9063_TWD_ERROR)
> + dev_dbg(da9063->dev,
> + "Fault log entry detected: DA9063_TWD_ERROR\n");
> + if (fault_log & DA9063_POR)
> + dev_dbg(da9063->dev,
> + "Fault log entry detected: DA9063_POR\n");
> + if (fault_log & DA9063_VDD_FAULT)
> + dev_dbg(da9063->dev,
> + "Fault log entry detected: DA9063_VDD_FAULT\n");
> + if (fault_log & DA9063_VDD_START)
> + dev_dbg(da9063->dev,
> + "Fault log entry detected: DA9063_VDD_START\n");
> + if (fault_log & DA9063_TEMP_CRIT)
> + dev_dbg(da9063->dev,
> + "Fault log entry detected: DA9063_TEMP_CRIT\n");
> + if (fault_log & DA9063_KEY_RESET)
> + dev_dbg(da9063->dev,
> + "Fault log entry detected: DA9063_KEY_RESET\n");
> + if (fault_log & DA9063_NSHUTDOWN)
> + dev_dbg(da9063->dev,
> + "Fault log entry detected: DA9063_NSHUTDOWN\n");
> + if (fault_log & DA9063_WAIT_SHUT)
> + dev_dbg(da9063->dev,
> + "Fault log entry detected: DA9063_WAIT_SHUT\n");
> + }
> +
> + ret = regmap_write(da9063->regmap,
> + DA9063_REG_FAULT_LOG,
> + fault_log);
> + if (ret < 0)
> + dev_err(da9063->dev,
> + "Cannot reset FAULT_LOG values %d\n", ret);
> +
> + return ret;
> +}
> +
> int da9063_device_init(struct da9063 *da9063, unsigned int irq)
> {
> struct da9063_pdata *pdata = da9063->dev->platform_data;
> int model, variant_id, variant_code;
> int ret;
>
> + ret = da9063_clear_fault_log(da9063);
> + if (ret < 0)
> + dev_err(da9063->dev, "Cannot clear fault log\n");
> +
> if (pdata) {
> da9063->flags = pdata->flags;
> da9063->irq_base = pdata->irq_base;
> @@ -178,6 +232,7 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
> if (ret)
> dev_err(da9063->dev, "Cannot add MFD cells\n");
>
> +
Tut tut!
> return ret;
> }
>
> diff --git a/include/linux/mfd/da9063/pdata.h b/include/linux/mfd/da9063/pdata.h
> index 95c8742..612383b 100644
> --- a/include/linux/mfd/da9063/pdata.h
> +++ b/include/linux/mfd/da9063/pdata.h
> @@ -103,6 +103,7 @@ struct da9063;
> struct da9063_pdata {
> int (*init)(struct da9063 *da9063);
> int irq_base;
> + bool key_power;
> unsigned flags;
> struct da9063_regulators_pdata *regulators_pdata;
> struct led_platform_data *leds_pdata;
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists