[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150503035952.GA25438@kwestfie-linux.qualcomm.com>
Date: Sat, 2 May 2015 20:59:52 -0700
From: Kenneth Westfield <kwestfie@...eaurora.org>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: Patrick Lai <plai@...eaurora.org>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Banajit Goswami <bgoswami@...eaurora.org>,
Kenneth Westfield <kwestfie@...eaurora.org>,
Liam Girdwood <lgirdwood@...il.com>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.de>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org, linux-arm-msm@...r.kernel.org
Subject: Re: [RFC PATCH 14/14] ASoC: qcom: document apq8016 machine driver
bindings
On Sat, May 02, 2015 at 05:03:07PM -0700, Kenneth Westfield wrote:
> On Thu, Apr 30, 2015 at 06:18:26PM +0100, Srinivas Kandagatla wrote:
> > This patch adds bindings for apq8016 machine driver.
> > On APQ8016 4 MI2S can be configured to different sinks like internal
> > codec/external codec, this connection is controlled via 2 iomux
> > registers.
> >
> > +sound: sound {
> > + compatible = "qcom,apq8016-sndcard";
> > + reg = <0x07702000 0x4>, <0x07702004 0x4>;
> > + reg-names = "mic-iomux", "spkr-iomux";
> > + qcom,model = "DB410c";
> > +
> > + /* I2S - Internal codec */
> > + internal-dai-link@0 {
> > + cpu { /* PRIMARY */
> > + sound-dai = <&lpass MI2S_PRIMARY>;
> > + };
> > + codec {
> > + sound-dai = <&wcd_codec 0>;
> > + };
> > + };
> > +
> > + /* External Primary or External Secondary -ADV7533 HDMI */
> > + external-dai-link@0 {
> > + external;
> > + cpu { /* QUAT */
> > + sound-dai = <&lpass MI2S_QUATERNARY>;
> > + };
> > + codec {
> > + sound-dai = <&adv_bridge 0>;
> > + };
> > + };
> > +};
>
> OK, although I will need to double-check this with the spec, it seems
> (from the patches) that there are 4 I2S ports, 2 of which are being
> used. Usually, multi-channel audio is sent to the primary dai (which
> is MI2S), which then gets sent to the other ports by HW. If that holds
> true for this SOC, then the external cpu dai should be labelled I2S,
> not MI2S. If not, then both should be labelled as I2S (and the DAI
> channel constraints should be reduced to 1-2).
>
> Looking at patch 12, the internal DAI is labelled Headset and the
> external DAI is labelled HDMI. I will check the spec to see if the QUAT
> I2S port can handle multi-channel.
Are you planning on supporting multi-channel audio playback on HDMI, or
just stereo/mono?
--
Kenneth Westfield
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists