[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1431435110-22595-2-git-send-email-lee.jones@linaro.org>
Date: Tue, 12 May 2015 13:51:38 +0100
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: kernel@...inux.com, devicetree@...r.kernel.org,
Lee Jones <lee.jones@...aro.org>,
Ajit Pal Singh <ajitpal.singh@...com>
Subject: [PATCH 01/13] ARM: STi: STiH407: Add DT nodes for for PWM
Supply top level nodes for the STiH407 based development boards.
The Pinctrl configuration has already been applied, so the only
missing piece of the DT puzzle is for a board's DTB to enable
the nodes.
Signed-off-by: Ajit Pal Singh <ajitpal.singh@...com>
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
arch/arm/boot/dts/stih407.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 3efa3b2..2c560fc3 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -147,5 +147,33 @@
};
};
};
+
+ /* COMMS PWM Module */
+ pwm0: pwm@...0000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0x9810000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@...0000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0x9510000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ &pinctrl_pwm1_chan1_default
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <4>;
+ };
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists