linux-kernel - [PATCH v5 16/21] clk: tegra: pll: Add Set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1431451444-23155-18-git-send-email-rklein@nvidia.com>
Date:	Tue, 12 May 2015 13:23:59 -0400
From:	Rhyland Klein <rklein@...dia.com>
To:	Peter De Schrijver <pdeschrijver@...dia.com>
CC:	Mike Turquette <mturquette@...aro.org>,
	Stephen Warren <swarren@...dotorg.org>,
	Stephen Boyd <sboyd@...eaurora.org>,
	Thierry Reding <thierry.reding@...il.com>,
	Alexandre Courbot <gnurou@...il.com>,
	Bill Huang <bilhuang@...dia.com>,
	Paul Walmsley <pwalmsley@...dia.com>,
	Jim Lin <jilin@...dia.com>, Benson Leung <bleung@...omium.org>,
	linux-clk@...r.kernel.org, linux-tegra@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v5 16/21] clk: tegra: pll: Add Set_default logic

From: Bill Huang <bilhuang@...dia.com>

Add logic which (if specified for a pll) can verify that a PLL is set
to the proper default value and if not can set it. This can be
specified per PLL as each will have different default values.

Based on original work by Aleksandr Frid <afrid@...dia.com>

Signed-off-by: Bill Huang <bilhuang@...dia.com>
---
v2:
  - Remove MACRO for PLL_MISC_CHECK_DEFAULT as suggested, and instead
    the tegra210 driver will include an inline version of this function.

 drivers/clk/tegra/clk-pll.c |   46 ++++++++++++++++++++++++++++++++-----------
 drivers/clk/tegra/clk.h     |    2 ++
 2 files changed, 37 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 626466665dde..36aa2a95fac0 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -652,13 +652,26 @@ static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
 			unsigned long rate)
 {
 	struct tegra_clk_pll *pll = to_clk_pll(hw);
+	struct tegra_clk_pll_freq_table old_cfg;
 	int state, ret = 0;
 
 	state = clk_pll_is_enabled(hw);
 
+	_get_pll_mnp(pll, &old_cfg);
+
+	if (state && pll->params->defaults_set && pll->params->dyn_ramp &&
+			(cfg->m == old_cfg.m) && (cfg->p == old_cfg.p)) {
+		ret = pll->params->dyn_ramp(pll, cfg);
+		if (!ret)
+			return 0;
+	}
+
 	if (state)
 		_clk_pll_disable(hw);
 
+	if (!pll->params->defaults_set && pll->params->set_defaults)
+		pll->params->set_defaults(pll);
+
 	_update_pll_mnp(pll, cfg);
 
 	if (pll->params->flags & TEGRA_PLL_HAS_CPCON)
@@ -1517,6 +1530,9 @@ static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll,
 	if (!pll->params->calc_rate)
 		pll->params->calc_rate = _calc_rate;
 
+	if (pll->params->set_defaults)
+		pll->params->set_defaults(pll);
+
 	/* Data in .init is copied by clk_register(), so stack variable OK */
 	pll->hw.init = &init;
 
@@ -1636,7 +1652,6 @@ struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
 	struct tegra_clk_pll *pll;
 	struct clk *clk, *parent;
 	unsigned long parent_rate;
-	int err;
 	u32 val, val_iddq;
 
 	parent = __clk_lookup(parent_name);
@@ -1657,18 +1672,27 @@ struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
 		pll_params->vco_min = pll_params->adjust_vco(pll_params,
 							     parent_rate);
 
-	err = _setup_dynamic_ramp(pll_params, clk_base, parent_rate);
-	if (err)
-		return ERR_PTR(err);
+	/*
+	 * If the pll has a set_defaults callback, it will take care of
+	 * configuring dynamic ramping and setting IDDQ in that path.
+	 */
+	if (!pll_params->set_defaults) {
+		int err;
 
-	val = readl_relaxed(clk_base + pll_params->base_reg);
-	val_iddq = readl_relaxed(clk_base + pll_params->iddq_reg);
+		err = _setup_dynamic_ramp(pll_params, clk_base, parent_rate);
+		if (err)
+			return ERR_PTR(err);
 
-	if (val & PLL_BASE_ENABLE)
-		WARN_ON(val_iddq & BIT(pll_params->iddq_bit_idx));
-	else {
-		val_iddq |= BIT(pll_params->iddq_bit_idx);
-		writel_relaxed(val_iddq, clk_base + pll_params->iddq_reg);
+		val = readl_relaxed(clk_base + pll_params->base_reg);
+		val_iddq = readl_relaxed(clk_base + pll_params->iddq_reg);
+
+		if (val & PLL_BASE_ENABLE)
+			WARN_ON(val_iddq & BIT(pll_params->iddq_bit_idx));
+		else {
+			val_iddq |= BIT(pll_params->iddq_bit_idx);
+			writel_relaxed(val_iddq,
+				       clk_base + pll_params->iddq_reg);
+		}
 	}
 
 	pll = _tegra_init_pll(clk_base, pmc, pll_params, lock);
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index a61d388364b3..38b4c95cfb2f 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -261,6 +261,7 @@ struct tegra_clk_pll_params {
 	int		stepb_shift;
 	int		lock_delay;
 	int		max_p;
+	bool		defaults_set;
 	struct pdiv_map *pdiv_tohw;
 	struct div_nmp	*div_nmp;
 	struct tegra_clk_pll_freq_table	*freq_table;
@@ -275,6 +276,7 @@ struct tegra_clk_pll_params {
 				unsigned long parent_rate);
 	int	(*dyn_ramp)(struct tegra_clk_pll *pll,
 			struct tegra_clk_pll_freq_table *cfg);
+	void	(*set_defaults)(struct tegra_clk_pll *pll);
 };
 
 #define TEGRA_PLL_USE_LOCK BIT(0)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/