lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2833904.edl5C89hXc@merkaba>
Date:	Thu, 21 May 2015 11:52:08 +0200
From:	Martin Steigerwald <martin@...htvoll.de>
To:	Takashi Iwai <tiwai@...e.de>
Cc:	linux-kernel@...r.kernel.org, alsa-devel@...a-project.org
Subject: Re: [REGRESSION] 4.1-rc4: Sound muted after boot

Am Donnerstag, 21. Mai 2015, 11:16:24 schrieb Takashi Iwai:
> At Thu, 21 May 2015 10:53:46 +0200,
> 
> Martin Steigerwald wrote:
> > Am Donnerstag, 21. Mai 2015, 06:28:24 schrieb Takashi Iwai:
> > > At Wed, 20 May 2015 16:31:55 +0200,
> > > 
> > > Martin Steigerwald wrote:
> > > > Hello!
> > > > 
> > > > On ThinkPad T520 (Intel Sandybridge) with 4.14-rc4 + two BTRFS
> > > > patches
> > > > and one Intel P-State debug patch I have no sound output on internal
> > > > Intel HD audio codec.
> > > > 
> > > > According to ThinkPad T520 LED with striked-through speaker the loud
> > > > speaker is in disabled state. Also KDE´s Phonon says a soundcard is
> > > > missing. In alsa-mixer I see nothing as MM for muted. If I press the
> > > > key next to the LED I get a notification on the desktop that loud
> > > > speaker has been enabled / disabled, but the LED still is on for it
> > > > being disabled.
> > > > 
> > > > I do not hear anything in Amarok or with aplay. alsa-mixer sound
> > > > volumes
> > > > are 100 for master and PCM. I also tried with disabling "Auto-Mute
> > > > Mod", but still no sound.
> > > > 
> > > > When I reboot and in BIOS or GRUB press the key then the LED toggles
> > > > state.
> > > > 
> > > > When I reboot into Linux 4.0.1 sound is working fine and loud
> > > > speaker
> > > > disabled LED is toggled off, so I bet this is a regression 4.1-rc4
> > > > compared to 4.0.1.
> > > 
> > > Please run alsa-info.sh at both working and non-working cases (with
> > > old and new kernels), and attach the outputs. Run the script with
> > > --no-upload option.
> > 
> > All attached.
> > 
> > I also have full dmesg outputs available in case it is needed.
> > 
> > > Also, such a problem is rather the device permissions problem.
> > > Check the device permissions of /dev/snd/* files (also check getfacl
> > > /dev/snd/*, too).
> > 
> > If its a permissions problem, why does it happen with 4.1-rc4, but not
> > with 4.0.1 oder any earlier kernels?
> 
> I wanted to mean it's rather "often" a permission problem.  Not
> necessarily your case, but still worth to check.
> 
> The mute LED behavior change is because of the new control added
> recently.  You seem to have changed the value to "On" while the
> default should be "Follow Master".  This explains the difference of
> behavior from 4.0.  It's no regression but manual misconfiguration by
> user.  In this mode, LED has no connection with the sound output at
> all.

I didn´t change ALSA configuration on upgrade from 4.0 to 4.1. Can it be it 
picked "On" as default? Cause I certainly didn´t touch this. Unless it could 
have been changed on earlier kernels as well. Well then it could be, cause 
there have been times I tried to set stuff in ALSA for various reasons, but 
quite some time ago.

I only changed "Auto-Mute Mod" to "disabled" as I tried to debug the muting 
issue, but other than that I didn´t change 

> Other than that, no different is seen in the hardware level.  The
> codec registers show all same values.  That is, from the driver POV,
> the sound should work.  (Though, you set "Disabled" to "Auto-Mute
> Mode" control which looks rather weird.)
> 
> So, revert "Mute-LED Mode" control to "Follow Master".  It can be done
> via alsamixer, amixer or whatever.  Then check whether the sound
> works again.  Check also from the headphone, too.

That works. Thank you. Headphone I will check later.

Ciao,
-- 
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA  B82F 991B EAAC A599 84C7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ