linux-kernel - Re: [PATCH v7 6/7] clk: hi6220: Clock driver support for Hisilicon hi6220 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 22 May 2015 13:20:36 +0800
From:	Bintian <bintian.wang@...wei.com>
To:	Stephen Boyd <sboyd@...eaurora.org>, <mturquette@...aro.org>,
	<zhangfei.gao@...aro.org>, <xuwei5@...ilicon.com>,
	<xuejiancheng@...wei.com>, <tomeu.vizoso@...labora.com>,
	<sledge.yanwei@...wei.com>, <linux-clk@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <arnd@...db.de>,
	<will.deacon@....com>, <robh+dt@...nel.org>, <khilman@...aro.org>,
	<mark.rutland@....com>, <catalin.marinas@....com>,
	<haojian.zhuang@...aro.org>,
	<linux-arm-kernel@...ts.infradead.org>, <olof@...om.net>,
	<yanhaifeng@...il.com>, <linux@....linux.org.uk>,
	<guodong.xu@...aro.org>, <jorge.ramirez-ortiz@...aro.org>,
	<tyler.baker@...aro.org>, <khilman@...nel.org>
CC:	<xuyiping@...ilicon.com>, <wangbinghui@...ilicon.com>,
	<zhenwei.wang@...ilicon.com>, <victor.lixin@...ilicon.com>,
	<puck.chen@...ilicon.com>, <dan.zhao@...ilicon.com>,
	<huxinwei@...wei.com>, <z.liuxinliang@...wei.com>,
	<heyunlei@...wei.com>, <kong.kongxinwei@...ilicon.com>,
	<wangbintian@...il.com>, <w.f@...wei.com>, <liguozhu@...ilicon.com>
Subject: Re: [PATCH v7 6/7] clk: hi6220: Clock driver support for Hisilicon
 hi6220 SoC

Hello Stephen,

On 2015/5/22 2:00, Stephen Boyd wrote:
> On 05/20/15 20:57, Bintian wrote:
>>
>>>
>>>>
>>>> +
>>>> +static void __init hi6220_clk_sys_init(struct device_node *np)
>>>> +{
>>>> +    struct hisi_clock_data *clk_data;
>>>> +
>>>> +    clk_data = hisi_clk_init(np, HI6220_SYS_NR_CLKS);
>>>> +    if (!clk_data)
>>>> +        return;
>>>> +
>>>> +    hisi_clk_register_gate_sep(hi6220_separated_gate_clks_sys,
>>>> +            ARRAY_SIZE(hi6220_separated_gate_clks_sys), clk_data);
>>>> +
>>>> +    hisi_clk_register_mux(hi6220_mux_clks_sys,
>>>> +            ARRAY_SIZE(hi6220_mux_clks_sys), clk_data);
>>>> +
>>>> +    hi6220_clk_register_divider(hi6220_div_clks_sys,
>>>> +            ARRAY_SIZE(hi6220_div_clks_sys), clk_data);
>>>> +
>>>> +    if (!clk_data_ao)
>>>> +        return;
>>>> +
>>>> +    /* enable high speed clock on UART1 mux */
>>>> +    clk_set_parent(clk_data->clk_data.clks[HI6220_UART1_SRC],
>>>> +            clk_data_ao->clk_data.clks[HI6220_150M]);
>>>
>>> Sorry I missed this one earlier. Can we do this clk_set_parent() through
>>> assigned-parents instead?
>> Uart1 has two clock parents in hi6220, and use "clk_tcxo" by default,
>> we use uart1 to connect BT in HiKey, and switch to "clk_150m" for high
>> speed mode of BT, but pl011 has no code to set clock rate or set clock
>> parents operation, so it's a easy way to do that here.
>
> Is pl011 the uart device? Does it have a node in DT somewhere? If it
> does, then we could put the assigned-parents properties in that node so
> that when the pl011 probes the uart1 clock has its parent set to
> clk_150m. See the "Assigned clock parents and rates" section of
> Documentation/devicetree/bindings/clock/clock-bindings.txt.
>
I will verify this.

If it is OK, I will remove "clk_set_parent" from this patch.

Thanks,

Bintian

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/