Message-ID: <55604CE9.9030800@kernel.org>
Date:	Sat, 23 May 2015 10:48:25 +0100
From:	Jonathan Cameron <jic23@...nel.org>
To:	Antoine Tenart <antoine.tenart@...e-electrons.com>,
	sebastian.hesselbarth@...il.com, knaack.h@....de, lars@...afoo.de,
	pmeerw@...erw.net
CC:	zmxu@...vell.com, jszhang@...vell.com, yrliao@...vell.com,
	linux-iio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 1/3] iio: adc: add support for Berlin

On 18/05/15 10:19, Antoine Tenart wrote:
> This patch adds the support of the Berlin ADC, available on Berlin SoCs.
> This ADC has 8 channels available, with one connected to a temperature
> sensor.
> 
> The particularity here, is that the temperature sensor connected to the
> ADC has its own registers, and both the ADC and the temperature sensor
> must be configured when using it.
> 
> Signed-off-by: Antoine Tenart <antoine.tenart@...e-electrons.com>
Applied and pushed out as togreg.
> ---
>  drivers/iio/adc/Kconfig       |   7 +
>  drivers/iio/adc/Makefile      |   1 +
>  drivers/iio/adc/berlin2-adc.c | 378 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 386 insertions(+)
>  create mode 100644 drivers/iio/adc/berlin2-adc.c
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index e36a73e7c3a8..cee50de76fb1 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -135,6 +135,13 @@ config AXP288_ADC
>  	  device. Depending on platform configuration, this general purpose ADC can
>  	  be used for sampling sensors such as thermal resistors.
>  
> +config BERLIN2_ADC
> +	tristate "Marvell Berlin2 ADC driver"
> +	depends on ARCH_BERLIN
> +	help
> +	  Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for
> +	  temperature measurement.
> +
>  config DA9150_GPADC
>  	tristate "Dialog DA9150 GPADC driver support"
>  	depends on MFD_DA9150
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 3930e63e84bc..a0962103e866 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_AD7887) += ad7887.o
>  obj-$(CONFIG_AD799X) += ad799x.o
>  obj-$(CONFIG_AT91_ADC) += at91_adc.o
>  obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
> +obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
>  obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
>  obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
>  obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
> diff --git a/drivers/iio/adc/berlin2-adc.c b/drivers/iio/adc/berlin2-adc.c
> new file mode 100644
> index 000000000000..aecc9ad995ad
> --- /dev/null
> +++ b/drivers/iio/adc/berlin2-adc.c
> @@ -0,0 +1,378 @@
> +/*
> + * Marvell Berlin2 ADC driver
> + *
> + * Copyright (C) 2015 Marvell Technology Group Ltd.
> + *
> + * Antoine Tenart <antoine.tenart@...e-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/driver.h>
> +#include <linux/iio/machine.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/sched.h>
> +#include <linux/wait.h>
> +
> +#define BERLIN2_SM_CTRL				0x14
> +#define  BERLIN2_SM_CTRL_SM_SOC_INT		BIT(1)
> +#define  BERLIN2_SM_CTRL_SOC_SM_INT		BIT(2)
> +#define  BERLIN2_SM_CTRL_ADC_SEL(x)		(BIT(x) << 5)	/* 0-15 */
> +#define  BERLIN2_SM_CTRL_ADC_SEL_MASK		(0xf << 5)
> +#define  BERLIN2_SM_CTRL_ADC_POWER		BIT(9)
> +#define  BERLIN2_SM_CTRL_ADC_CLKSEL_DIV2	(0x0 << 10)
> +#define  BERLIN2_SM_CTRL_ADC_CLKSEL_DIV3	(0x1 << 10)
> +#define  BERLIN2_SM_CTRL_ADC_CLKSEL_DIV4	(0x2 << 10)
> +#define  BERLIN2_SM_CTRL_ADC_CLKSEL_DIV8	(0x3 << 10)
> +#define  BERLIN2_SM_CTRL_ADC_CLKSEL_MASK	(0x3 << 10)
> +#define  BERLIN2_SM_CTRL_ADC_START		BIT(12)
> +#define  BERLIN2_SM_CTRL_ADC_RESET		BIT(13)
> +#define  BERLIN2_SM_CTRL_ADC_BANDGAP_RDY	BIT(14)
> +#define  BERLIN2_SM_CTRL_ADC_CONT_SINGLE	(0x0 << 15)
> +#define  BERLIN2_SM_CTRL_ADC_CONT_CONTINUOUS	(0x1 << 15)
> +#define  BERLIN2_SM_CTRL_ADC_BUFFER_EN		BIT(16)
> +#define  BERLIN2_SM_CTRL_ADC_VREF_EXT		(0x0 << 17)
> +#define  BERLIN2_SM_CTRL_ADC_VREF_INT		(0x1 << 17)
> +#define  BERLIN2_SM_CTRL_ADC_ROTATE		BIT(19)
> +#define  BERLIN2_SM_CTRL_TSEN_EN		BIT(20)
> +#define  BERLIN2_SM_CTRL_TSEN_CLK_SEL_125	(0x0 << 21)	/* 1.25 MHz */
> +#define  BERLIN2_SM_CTRL_TSEN_CLK_SEL_250	(0x1 << 21)	/* 2.5 MHz */
> +#define  BERLIN2_SM_CTRL_TSEN_MODE_0_125	(0x0 << 22)	/* 0-125 C */
> +#define  BERLIN2_SM_CTRL_TSEN_MODE_10_50	(0x1 << 22)	/* 10-50 C */
> +#define  BERLIN2_SM_CTRL_TSEN_RESET		BIT(29)
> +#define BERLIN2_SM_ADC_DATA			0x20
> +#define  BERLIN2_SM_ADC_MASK			0x3ff
> +#define BERLIN2_SM_ADC_STATUS			0x1c
> +#define  BERLIN2_SM_ADC_STATUS_DATA_RDY(x)	BIT(x)		/* 0-15 */
> +#define  BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK	0xf
> +#define  BERLIN2_SM_ADC_STATUS_INT_EN(x)	(BIT(x) << 16)	/* 0-15 */
> +#define  BERLIN2_SM_ADC_STATUS_INT_EN_MASK	(0xf << 16)
> +#define BERLIN2_SM_TSEN_STATUS			0x24
> +#define  BERLIN2_SM_TSEN_STATUS_DATA_RDY	BIT(0)
> +#define  BERLIN2_SM_TSEN_STATUS_INT_EN		BIT(1)
> +#define BERLIN2_SM_TSEN_DATA			0x28
> +#define  BERLIN2_SM_TSEN_MASK			0xfff
> +#define BERLIN2_SM_TSEN_CTRL			0x74
> +#define  BERLIN2_SM_TSEN_CTRL_START		BIT(8)
> +#define  BERLIN2_SM_TSEN_CTRL_SETTLING_4	(0x0 << 21)	/* 4 us */
> +#define  BERLIN2_SM_TSEN_CTRL_SETTLING_12	(0x1 << 21)	/* 12 us */
> +#define  BERLIN2_SM_TSEN_CTRL_SETTLING_MASK	(0x1 << 21)
> +#define  BERLIN2_SM_TSEN_CTRL_TRIM(x)		((x) << 22)
> +#define  BERLIN2_SM_TSEN_CTRL_TRIM_MASK		(0xf << 22)
> +
> +struct berlin2_adc_priv {
> +	struct regmap		*regmap;
> +	struct mutex		lock;
> +	wait_queue_head_t	wq;
> +	bool			data_available;
> +	int			data;
> +};
> +
> +#define BERLIN2_ADC_CHANNEL(n, t)					\
> +		{							\
> +			.channel	= n,				\
> +			.datasheet_name	= "channel"#n,			\
> +			.type		= t,				\
> +			.indexed	= 1,				\
> +			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
> +		}
> +
> +static struct iio_chan_spec berlin2_adc_channels[] = {
> +	BERLIN2_ADC_CHANNEL(0, IIO_VOLTAGE),	/* external input */
> +	BERLIN2_ADC_CHANNEL(1, IIO_VOLTAGE),	/* external input */
> +	BERLIN2_ADC_CHANNEL(2, IIO_VOLTAGE),	/* external input */
> +	BERLIN2_ADC_CHANNEL(3, IIO_VOLTAGE),	/* external input */
> +	BERLIN2_ADC_CHANNEL(4, IIO_VOLTAGE),	/* reserved */
> +	BERLIN2_ADC_CHANNEL(5, IIO_VOLTAGE),	/* reserved */
> +	{					/* temperature sensor */
> +		.channel		= 6,
> +		.datasheet_name		= "channel6",
> +		.type			= IIO_TEMP,
> +		.indexed		= 0,
> +		.info_mask_separate	= BIT(IIO_CHAN_INFO_PROCESSED),
> +	},
> +	BERLIN2_ADC_CHANNEL(7, IIO_VOLTAGE),	/* reserved */
> +	IIO_CHAN_SOFT_TIMESTAMP(8),		/* timestamp */
> +};
> +#define BERLIN2_N_CHANNELS	ARRAY_SIZE(berlin2_adc_channels)
> +
> +static int berlin2_adc_read(struct iio_dev *indio_dev, int channel)
> +{
> +	struct berlin2_adc_priv *priv = iio_priv(indio_dev);
> +	int data, ret;
> +
> +	mutex_lock(&priv->lock);
> +
> +	/* Configure the ADC */
> +	regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
> +			BERLIN2_SM_CTRL_ADC_RESET | BERLIN2_SM_CTRL_ADC_SEL_MASK
> +			| BERLIN2_SM_CTRL_ADC_START,
> +			BERLIN2_SM_CTRL_ADC_SEL(channel) | BERLIN2_SM_CTRL_ADC_START);
> +
> +	ret = wait_event_interruptible_timeout(priv->wq, priv->data_available,
> +			msecs_to_jiffies(1000));
> +
> +	/* Disable the interrupts */
> +	regmap_update_bits(priv->regmap, BERLIN2_SM_ADC_STATUS,
> +			BERLIN2_SM_ADC_STATUS_INT_EN(channel), 0);
> +
> +	if (ret == 0)
> +		ret = -ETIMEDOUT;
> +	if (ret < 0) {
> +		mutex_unlock(&priv->lock);
> +		return ret;
> +	}
> +
> +	regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
> +			BERLIN2_SM_CTRL_ADC_START, 0);
> +
> +	data = priv->data;
> +	priv->data_available = false;
> +
> +	mutex_unlock(&priv->lock);
> +
> +	return data;
> +}
> +
> +static int berlin2_adc_tsen_read(struct iio_dev *indio_dev)
> +{
> +	struct berlin2_adc_priv *priv = iio_priv(indio_dev);
> +	int data, ret;
> +
> +	mutex_lock(&priv->lock);
> +
> +	/* Configure the ADC */
> +	regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
> +			BERLIN2_SM_CTRL_TSEN_RESET | BERLIN2_SM_CTRL_ADC_ROTATE,
> +			BERLIN2_SM_CTRL_ADC_ROTATE);
> +
> +	/* Configure the temperature sensor */
> +	regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_CTRL,
> +			BERLIN2_SM_TSEN_CTRL_TRIM_MASK | BERLIN2_SM_TSEN_CTRL_SETTLING_MASK
> +			| BERLIN2_SM_TSEN_CTRL_START,
> +			BERLIN2_SM_TSEN_CTRL_TRIM(3) | BERLIN2_SM_TSEN_CTRL_SETTLING_12
> +			| BERLIN2_SM_TSEN_CTRL_START);
> +
> +	ret = wait_event_interruptible_timeout(priv->wq, priv->data_available,
> +			msecs_to_jiffies(1000));
> +
> +	/* Disable interrupts */
> +	regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_STATUS,
> +			BERLIN2_SM_TSEN_STATUS_INT_EN, 0);
> +
> +	if (ret == 0)
> +		ret = -ETIMEDOUT;
> +	if (ret < 0) {
> +		mutex_unlock(&priv->lock);
> +		return ret;
> +	}
> +
> +	regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_CTRL,
> +			BERLIN2_SM_TSEN_CTRL_START, 0);
> +
> +	data = priv->data;
> +	priv->data_available = false;
> +
> +	mutex_unlock(&priv->lock);
> +
> +	return data;
> +}
> +
> +static int berlin2_adc_read_raw(struct iio_dev *indio_dev,
> +		struct iio_chan_spec const *chan, int *val, int *val2,
> +		long mask)
> +{
> +	struct berlin2_adc_priv *priv = iio_priv(indio_dev);
> +	int temp;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		if (chan->type != IIO_VOLTAGE)
> +			return -EINVAL;
> +
> +		/* Enable the interrupts */
> +		regmap_write(priv->regmap, BERLIN2_SM_ADC_STATUS,
> +				BERLIN2_SM_ADC_STATUS_INT_EN(chan->channel));
> +
> +		*val = berlin2_adc_read(indio_dev, chan->channel);
> +		if (*val < 0)
> +			return *val;
> +
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_PROCESSED:
> +		if (chan->type != IIO_TEMP)
> +			return -EINVAL;
> +
> +		/* Enable interrupts */
> +		regmap_write(priv->regmap, BERLIN2_SM_TSEN_STATUS,
> +				BERLIN2_SM_TSEN_STATUS_INT_EN);
> +
> +		temp = berlin2_adc_tsen_read(indio_dev);
> +		if (temp < 0)
> +			return temp;
> +
> +		if (temp > 2047)
> +			temp = -(4096 - temp);
> +
> +		/* Convert to milli Celsius */
> +		*val = ((temp * 100000) / 264 - 270000);
> +		return IIO_VAL_INT;
> +	default:
> +		break;
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static irqreturn_t berlin2_adc_irq(int irq, void *private)
> +{
> +	struct berlin2_adc_priv *priv = iio_priv(private);
> +	unsigned val;
> +
> +	regmap_read(priv->regmap, BERLIN2_SM_ADC_STATUS, &val);
> +	if (val & BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK) {
> +		regmap_read(priv->regmap, BERLIN2_SM_ADC_DATA, &priv->data);
> +		priv->data &= BERLIN2_SM_ADC_MASK;
> +
> +		val &= ~BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK;
> +		regmap_write(priv->regmap, BERLIN2_SM_ADC_STATUS, val);
> +
> +		priv->data_available = true;
> +		wake_up_interruptible(&priv->wq);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t berlin2_adc_tsen_irq(int irq, void *private)
> +{
> +	struct berlin2_adc_priv *priv = iio_priv(private);
> +	unsigned val;
> +
> +	regmap_read(priv->regmap, BERLIN2_SM_TSEN_STATUS, &val);
> +	if (val & BERLIN2_SM_TSEN_STATUS_DATA_RDY) {
> +		regmap_read(priv->regmap, BERLIN2_SM_TSEN_DATA, &priv->data);
> +		priv->data &= BERLIN2_SM_TSEN_MASK;
> +
> +		val &= ~BERLIN2_SM_TSEN_STATUS_DATA_RDY;
> +		regmap_write(priv->regmap, BERLIN2_SM_TSEN_STATUS, val);
> +
> +		priv->data_available = true;
> +		wake_up_interruptible(&priv->wq);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static const struct iio_info berlin2_adc_info = {
> +	.driver_module	= THIS_MODULE,
> +	.read_raw	= berlin2_adc_read_raw,
> +};
> +
> +static int berlin2_adc_probe(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev;
> +	struct berlin2_adc_priv *priv;
> +	struct device_node *parent_np = of_get_parent(pdev->dev.of_node);
> +	int irq, tsen_irq;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev,
> +					  sizeof(struct berlin2_adc_priv));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	priv = iio_priv(indio_dev);
> +	platform_set_drvdata(pdev, indio_dev);
> +
> +	priv->regmap = syscon_node_to_regmap(parent_np);
> +	of_node_put(parent_np);
> +	if (IS_ERR(priv->regmap))
> +		return PTR_ERR(priv->regmap);
> +
> +	irq = platform_get_irq_byname(pdev, "adc");
> +	if (irq < 0)
> +		return -ENODEV;
> +
> +	tsen_irq = platform_get_irq_byname(pdev, "tsen");
> +	if (tsen_irq < 0)
> +		return -ENODEV;
> +
> +	ret = devm_request_irq(&pdev->dev, irq, berlin2_adc_irq, 0,
> +			pdev->dev.driver->name, indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = devm_request_irq(&pdev->dev, tsen_irq, berlin2_adc_tsen_irq,
> +			0, pdev->dev.driver->name, indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	init_waitqueue_head(&priv->wq);
> +	mutex_init(&priv->lock);
> +
> +	indio_dev->dev.parent = &pdev->dev;
> +	indio_dev->name = dev_name(&pdev->dev);
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->info = &berlin2_adc_info;
> +
> +	indio_dev->num_channels = BERLIN2_N_CHANNELS;
> +	indio_dev->channels = berlin2_adc_channels;
> +
> +	/* Power up the ADC */
> +	regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
> +			BERLIN2_SM_CTRL_ADC_POWER, BERLIN2_SM_CTRL_ADC_POWER);
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret) {
> +		/* Power down the ADC */
> +		regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
> +				BERLIN2_SM_CTRL_ADC_POWER, 0);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int berlin2_adc_remove(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct berlin2_adc_priv *priv = iio_priv(indio_dev);
> +
> +	iio_device_unregister(indio_dev);
> +
> +	/* Power down the ADC */
> +	regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
> +			BERLIN2_SM_CTRL_ADC_POWER, 0);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id berlin2_adc_match[] = {
> +	{ .compatible = "marvell,berlin2-adc", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, berlin2_adc_match);
> +
> +static struct platform_driver berlin2_adc_driver = {
> +	.driver	= {
> +		.name		= "berlin2-adc",
> +		.of_match_table	= berlin2_adc_match,
> +	},
> +	.probe	= berlin2_adc_probe,
> +	.remove	= berlin2_adc_remove,
> +};
> +module_platform_driver(berlin2_adc_driver);
> +
> +MODULE_AUTHOR("Antoine Tenart <antoine.tenart@...e-electrons.com>");
> +MODULE_DESCRIPTION("Marvell Berlin2 ADC driver");
> +MODULE_LICENSE("GPL v2");
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists