| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 27 May 2015 22:50:41 +0900
From: Chanwoo Choi <cwchoi00@...il.com>
To: Krzysztof Kozlowski <k.kozlowski.k@...il.com>
Cc: MyungJoo Ham <myungjoo.ham@...sung.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>,
Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-input@...r.kernel.org,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>
Subject: Re: [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow
inclusion with max77693
On Sun, May 24, 2015 at 2:43 PM, Krzysztof Kozlowski
<k.kozlowski.k@...il.com> wrote:
> Add MAX77843_MUIC prefix to some of the defines used in max77843 extcon
> driver so the max77693-private.h can be included simultaneously with
> max77843-private.h.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@...il.com>
> Acked-by: Lee Jones <lee.jones@...aro.org>
> ---
> drivers/extcon/extcon-max77843.c | 49 +++++++----
> include/linux/mfd/max77843-private.h | 154 +++++++++++++++++------------------
> 2 files changed, 109 insertions(+), 94 deletions(-)
>
> diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
> index 0f5910dcccb7..8a38d4acf026 100644
> --- a/drivers/extcon/extcon-max77843.c
> +++ b/drivers/extcon/extcon-max77843.c
> @@ -206,11 +206,11 @@ static int max77843_muic_set_path(struct max77843_muic_info *info,
> if (attached)
> ctrl1 = val;
> else
> - ctrl1 = CONTROL1_SW_OPEN;
> + ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
>
> ret = regmap_update_bits(max77843->regmap_muic,
> MAX77843_MUIC_REG_CONTROL1,
> - CONTROL1_COM_SW, ctrl1);
> + MAX77843_MUIC_CONTROL1_COM_SW, ctrl1);
> if (ret < 0) {
> dev_err(info->dev, "Cannot switch MUIC port\n");
> return ret;
> @@ -244,7 +244,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
>
> adc = info->status[MAX77843_MUIC_STATUS1] &
> MAX77843_MUIC_STATUS1_ADC_MASK;
> - adc >>= STATUS1_ADC_SHIFT;
> + adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
>
> switch (group) {
> case MAX77843_CABLE_GROUP_ADC:
> @@ -310,7 +310,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
> /* Get VBVolt register bit */
> gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
> MAX77843_MUIC_STATUS2_VBVOLT_MASK);
> - gnd_type >>= STATUS2_VBVOLT_SHIFT;
> + gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
>
> /* Offset of GND cable */
> gnd_type |= MAX77843_MUIC_GND_USB_HOST;
> @@ -339,7 +339,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
> switch (gnd_cable_type) {
> case MAX77843_MUIC_GND_USB_HOST:
> case MAX77843_MUIC_GND_USB_HOST_VB:
> - ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
> + ret = max77843_muic_set_path(info,
> + MAX77843_MUIC_CONTROL1_SW_USB,
> + attached);
> if (ret < 0)
> return ret;
>
> @@ -347,7 +349,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
> break;
> case MAX77843_MUIC_GND_MHL_VB:
> case MAX77843_MUIC_GND_MHL:
> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
> + ret = max77843_muic_set_path(info,
> + MAX77843_MUIC_CONTROL1_SW_OPEN,
> + attached);
> if (ret < 0)
> return ret;
>
> @@ -366,7 +370,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
> int cable_type, bool attached)
> {
> int ret;
> - u8 path = CONTROL1_SW_OPEN;
> + u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
>
> dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
> attached ? "attached" : "detached", cable_type);
> @@ -374,10 +378,10 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
> switch (cable_type) {
> case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
> case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
> - path = CONTROL1_SW_USB;
> + path = MAX77843_MUIC_CONTROL1_SW_USB;
> break;
> case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
> - path = CONTROL1_SW_UART;
> + path = MAX77843_MUIC_CONTROL1_SW_UART;
> break;
> default:
> return -EINVAL;
> @@ -475,14 +479,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
>
> switch (chg_type) {
> case MAX77843_MUIC_CHG_USB:
> - ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
> + ret = max77843_muic_set_path(info,
> + MAX77843_MUIC_CONTROL1_SW_USB,
> + attached);
> if (ret < 0)
> return ret;
>
> extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
> break;
> case MAX77843_MUIC_CHG_DOWNSTREAM:
> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
> + ret = max77843_muic_set_path(info,
> + MAX77843_MUIC_CONTROL1_SW_OPEN,
> + attached);
> if (ret < 0)
> return ret;
>
> @@ -490,14 +498,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
> attached);
> break;
> case MAX77843_MUIC_CHG_DEDICATED:
> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
> + ret = max77843_muic_set_path(info,
> + MAX77843_MUIC_CONTROL1_SW_OPEN,
> + attached);
> if (ret < 0)
> return ret;
>
> extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
> break;
> case MAX77843_MUIC_CHG_SPECIAL_500MA:
> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
> + ret = max77843_muic_set_path(info,
> + MAX77843_MUIC_CONTROL1_SW_OPEN,
> + attached);
> if (ret < 0)
> return ret;
>
> @@ -505,7 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
> attached);
> break;
> case MAX77843_MUIC_CHG_SPECIAL_1A:
> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
> + ret = max77843_muic_set_path(info,
> + MAX77843_MUIC_CONTROL1_SW_OPEN,
> + attached);
> if (ret < 0)
> return ret;
>
> @@ -529,7 +543,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
> "failed to detect %s accessory (chg_type:0x%x)\n",
> attached ? "attached" : "detached", chg_type);
>
> - max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
> + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
> + attached);
> return -EINVAL;
> }
>
> @@ -668,7 +683,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
> ret = regmap_update_bits(max77843->regmap_muic,
> MAX77843_MUIC_REG_CONTROL4,
> MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
> - time << CONTROL4_ADCDBSET_SHIFT);
> + time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
> if (ret < 0) {
> dev_err(info->dev, "Cannot write MUIC regmap\n");
> return ret;
> @@ -769,7 +784,7 @@ static int max77843_muic_probe(struct platform_device *pdev)
> max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
>
> /* Set initial path for UART */
> - max77843_muic_set_path(info, CONTROL1_SW_UART, true);
> + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true);
>
> /* Check revision number of MUIC device */
> ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
> diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
> index 0121d9440340..c19303b0ccfd 100644
> --- a/include/linux/mfd/max77843-private.h
> +++ b/include/linux/mfd/max77843-private.h
> @@ -318,62 +318,62 @@ enum max77843_irq_muic {
> MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
>
> /* MAX77843 STATUS register*/
> -#define STATUS1_ADC_SHIFT 0
> -#define STATUS1_ADCERROR_SHIFT 6
> -#define STATUS1_ADC1K_SHIFT 7
> -#define STATUS2_CHGTYP_SHIFT 0
> -#define STATUS2_CHGDETRUN_SHIFT 3
> -#define STATUS2_DCDTMR_SHIFT 4
> -#define STATUS2_DXOVP_SHIFT 5
> -#define STATUS2_VBVOLT_SHIFT 6
> -#define STATUS3_VBADC_SHIFT 0
> -#define STATUS3_VDNMON_SHIFT 4
> -#define STATUS3_DNRES_SHIFT 5
> -#define STATUS3_MPNACK_SHIFT 6
> -
> -#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
> -#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(STATUS1_ADCERROR_SHIFT)
> -#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(STATUS1_ADC1K_SHIFT)
> -#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
> -#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(STATUS2_CHGDETRUN_SHIFT)
> -#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(STATUS2_DCDTMR_SHIFT)
> -#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(STATUS2_DXOVP_SHIFT)
> -#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(STATUS2_VBVOLT_SHIFT)
> -#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << STATUS3_VBADC_SHIFT)
> -#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(STATUS3_VDNMON_SHIFT)
> -#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(STATUS3_DNRES_SHIFT)
> -#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(STATUS3_MPNACK_SHIFT)
> +#define MAX77843_MUIC_STATUS1_ADC_SHIFT 0
> +#define MAX77843_MUIC_STATUS1_ADCERROR_SHIFT 6
> +#define MAX77843_MUIC_STATUS1_ADC1K_SHIFT 7
> +#define MAX77843_MUIC_STATUS2_CHGTYP_SHIFT 0
> +#define MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT 3
> +#define MAX77843_MUIC_STATUS2_DCDTMR_SHIFT 4
> +#define MAX77843_MUIC_STATUS2_DXOVP_SHIFT 5
> +#define MAX77843_MUIC_STATUS2_VBVOLT_SHIFT 6
> +#define MAX77843_MUIC_STATUS3_VBADC_SHIFT 0
> +#define MAX77843_MUIC_STATUS3_VDNMON_SHIFT 4
> +#define MAX77843_MUIC_STATUS3_DNRES_SHIFT 5
> +#define MAX77843_MUIC_STATUS3_MPNACK_SHIFT 6
> +
> +#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << MAX77843_MUIC_STATUS1_ADC_SHIFT)
> +#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(MAX77843_MUIC_STATUS1_ADCERROR_SHIFT)
> +#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(MAX77843_MUIC_STATUS1_ADC1K_SHIFT)
> +#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << MAX77843_MUIC_STATUS2_CHGTYP_SHIFT)
> +#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT)
> +#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(MAX77843_MUIC_STATUS2_DCDTMR_SHIFT)
> +#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(MAX77843_MUIC_STATUS2_DXOVP_SHIFT)
> +#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(MAX77843_MUIC_STATUS2_VBVOLT_SHIFT)
> +#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << MAX77843_MUIC_STATUS3_VBADC_SHIFT)
> +#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(MAX77843_MUIC_STATUS3_VDNMON_SHIFT)
> +#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(MAX77843_MUIC_STATUS3_DNRES_SHIFT)
> +#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(MAX77843_MUIC_STATUS3_MPNACK_SHIFT)
>
> /* MAX77843 CONTROL register */
> -#define CONTROL1_COMP1SW_SHIFT 0
> -#define CONTROL1_COMP2SW_SHIFT 3
> -#define CONTROL1_IDBEN_SHIFT 7
> -#define CONTROL2_LOWPWR_SHIFT 0
> -#define CONTROL2_ADCEN_SHIFT 1
> -#define CONTROL2_CPEN_SHIFT 2
> -#define CONTROL2_ACC_DET_SHIFT 5
> -#define CONTROL2_USBCPINT_SHIFT 6
> -#define CONTROL2_RCPS_SHIFT 7
> -#define CONTROL3_JIGSET_SHIFT 0
> -#define CONTROL4_ADCDBSET_SHIFT 0
> -#define CONTROL4_USBAUTO_SHIFT 4
> -#define CONTROL4_FCTAUTO_SHIFT 5
> -#define CONTROL4_ADCMODE_SHIFT 6
> -
> -#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << CONTROL1_COMP1SW_SHIFT)
> -#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << CONTROL1_COMP2SW_SHIFT)
> -#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(CONTROL1_IDBEN_SHIFT)
> -#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(CONTROL2_LOWPWR_SHIFT)
> -#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(CONTROL2_ADCEN_SHIFT)
> -#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(CONTROL2_CPEN_SHIFT)
> -#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(CONTROL2_ACC_DET_SHIFT)
> -#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(CONTROL2_USBCPINT_SHIFT)
> -#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(CONTROL2_RCPS_SHIFT)
> -#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
> -#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << CONTROL4_ADCDBSET_SHIFT)
> -#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(CONTROL4_USBAUTO_SHIFT)
> -#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(CONTROL4_FCTAUTO_SHIFT)
> -#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << CONTROL4_ADCMODE_SHIFT)
> +#define MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT 0
> +#define MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT 3
> +#define MAX77843_MUIC_CONTROL1_IDBEN_SHIFT 7
> +#define MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT 0
> +#define MAX77843_MUIC_CONTROL2_ADCEN_SHIFT 1
> +#define MAX77843_MUIC_CONTROL2_CPEN_SHIFT 2
> +#define MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT 5
> +#define MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT 6
> +#define MAX77843_MUIC_CONTROL2_RCPS_SHIFT 7
> +#define MAX77843_MUIC_CONTROL3_JIGSET_SHIFT 0
> +#define MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT 0
> +#define MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT 4
> +#define MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT 5
> +#define MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT 6
> +
> +#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT)
> +#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT)
> +#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(MAX77843_MUIC_CONTROL1_IDBEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(MAX77843_MUIC_CONTROL2_ADCEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(MAX77843_MUIC_CONTROL2_CPEN_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT)
> +#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(MAX77843_MUIC_CONTROL2_RCPS_SHIFT)
> +#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << MAX77843_MUIC_CONTROL3_JIGSET_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT)
> +#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT)
>
> /* MAX77843 switch port */
> #define COM_OPEN 0
> @@ -383,38 +383,38 @@ enum max77843_irq_muic {
> #define COM_AUX_USB 4
> #define COM_AUX_UART 5
>
> -#define CONTROL1_COM_SW \
> +#define MAX77843_MUIC_CONTROL1_COM_SW \
> ((MAX77843_MUIC_CONTROL1_COMP1SW_MASK | \
> MAX77843_MUIC_CONTROL1_COMP2SW_MASK))
>
> -#define CONTROL1_SW_OPEN \
> - ((COM_OPEN << CONTROL1_COMP1SW_SHIFT | \
> - COM_OPEN << CONTROL1_COMP2SW_SHIFT))
> -#define CONTROL1_SW_USB \
> - ((COM_USB << CONTROL1_COMP1SW_SHIFT | \
> - COM_USB << CONTROL1_COMP2SW_SHIFT))
> -#define CONTROL1_SW_AUDIO \
> - ((COM_AUDIO << CONTROL1_COMP1SW_SHIFT | \
> - COM_AUDIO << CONTROL1_COMP2SW_SHIFT))
> -#define CONTROL1_SW_UART \
> - ((COM_UART << CONTROL1_COMP1SW_SHIFT | \
> - COM_UART << CONTROL1_COMP2SW_SHIFT))
> -#define CONTROL1_SW_AUX_USB \
> - ((COM_AUX_USB << CONTROL1_COMP1SW_SHIFT | \
> - COM_AUX_USB << CONTROL1_COMP2SW_SHIFT))
> -#define CONTROL1_SW_AUX_UART \
> - ((COM_AUX_UART << CONTROL1_COMP1SW_SHIFT | \
> - COM_AUX_UART << CONTROL1_COMP2SW_SHIFT))
> +#define MAX77843_MUIC_CONTROL1_SW_OPEN \
> + ((COM_OPEN << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
> + COM_OPEN << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
> +#define MAX77843_MUIC_CONTROL1_SW_USB \
> + ((COM_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
> + COM_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
> +#define MAX77843_MUIC_CONTROL1_SW_AUDIO \
> + ((COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
> + COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
> +#define MAX77843_MUIC_CONTROL1_SW_UART \
> + ((COM_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
> + COM_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
> +#define MAX77843_MUIC_CONTROL1_SW_AUX_USB \
> + ((COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
> + COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
> +#define MAX77843_MUIC_CONTROL1_SW_AUX_UART \
> + ((COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
> + COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
You add "MAX77843_MUIC_" prefix but, I think that "MUIC_" prefix is
not necessary.
You don't add the "MUIC_" prefix on similar patch6.
If you remove the "MUIC_" prefix, looks good to me about this patch.
Acked-by: Chanwoo Choi <cw00.choi@...sung.com>
Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists