| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1e85ad053b3b52c4d749580cce52b737.squirrel@www.codeaurora.org>
Date: Wed, 27 May 2015 10:21:10 -0600
From: "Ankit Gupta" <ankgupta@...eaurora.org>
To: "Ankit Gupta" <ankgupta@...eaurora.org>
Cc: gavidov@...eaurora.org, sdharia@...eaurora.org,
ivan.ivanov@...aro.org, svarbanov@...sol.com, rostedt@...dmis.org,
linux-arm-msm@...r.kernel.org, gregkh@...uxfoundation.org,
sboyd@...eaurora.org, collinsd@...eaurora.org,
osvaldob@...eaurora.org, linux-kernel@...r.kernel.org,
mlocke@...eaurora.org, galak@...eaurora.org, agross@...eaurora.org,
"Ankit Gupta" <ankgupta@...eaurora.org>
Subject: Re: [PATCH v2] spmi-pmic-arb: add irq tracepoints to the pmic-arb
driver
> The spmi-pmic-arb is also an interrupt controller. It gets a
> single aggregate irq and disseminates it to individual
> pmic-peripheral drivers. Each pmic-peripheral has a unique apid
> number, and can have multiple interrupt capable functions.
> The registered apid range shows the lowest and highest apid
> numbers of pmic-peripheral drivers which request irqs. Pid is
> the base address of that peripheral. For performance measurement,
> tracepoints are added at the beginning of the aggregate irq and
> at the end of the individual pmic-peripheral irqs.
>
> Following is a list showing the new tracepoint events:
>
> spmi_pmic_arb_aggregate_irq_start: aggregate irq number and registered
> apid range.
>
> spmi_pmic_arb_apid_irq_end: apid, irq, func_num, sid and pid.
>
> SPMI Interrupts tracepoints can be enabled like:
>
> echo 1 >/sys/kernel/debug/tracing/events/spmi-pmic-arb/enable
>
> and will dump messages that can be viewed in
> /sys/kernel/debug/tracing/trace that look like:
> ... spmi_pmic_arb_aggregate_irq_start: irq=150 registered apid
> range=(3,189)
> ... spmi_pmic_arb_apid_irq_end: apid=3 irq=1 func_num=0 sid=0 pid=0x8
>
> Suggested-by: Sagar Dharia <sdharia@...eaurora.org>
> Signed-off-by: Gilad Avidov <gavidov@...eaurora.org>
> Signed-off-by: Ankit Gupta <ankgupta@...eaurora.org>
> ---
---
Changes since V1:
- pass ppid from driver to evaluate pid and sid in trace file itself.
- type of apid range change from int to u16 as max range can be 512.
- type of func_num change from int to u8, as max it can be 8.
---
> drivers/spmi/spmi-pmic-arb.c | 13 +++++---
> include/trace/events/spmi-pmic-arb.h | 62
> ++++++++++++++++++++++++++++++++++++
> 2 files changed, 70 insertions(+), 5 deletions(-)
> create mode 100644 include/trace/events/spmi-pmic-arb.h
>
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index 20559ab..56100e2 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -23,6 +23,9 @@
> #include <linux/slab.h>
> #include <linux/spmi.h>
>
> +#define CREATE_TRACE_POINTS
> +#include <trace/events/spmi-pmic-arb.h>
> +
> /* PMIC Arbiter configuration registers */
> #define PMIC_ARB_VERSION 0x0000
> #define PMIC_ARB_INT_EN 0x0004
> @@ -375,16 +378,15 @@ static void periph_interrupt(struct
> spmi_pmic_arb_dev *pa, u8 apid)
> unsigned int irq;
> u32 status;
> int id;
> + u16 ppid = pa->apid_to_ppid[apid];
>
> status = readl_relaxed(pa->intr + SPMI_PIC_IRQ_STATUS(apid));
> while (status) {
> id = ffs(status) - 1;
> status &= ~(1 << id);
> - irq = irq_find_mapping(pa->domain,
> - pa->apid_to_ppid[apid] << 16
> - | id << 8
> - | apid);
> + irq = irq_find_mapping(pa->domain, ppid << 16 | id << 8 | apid);
> generic_handle_irq(irq);
> + trace_spmi_pmic_arb_apid_irq_end(apid, irq, id, ppid);
> }
> }
>
> @@ -399,7 +401,8 @@ static void pmic_arb_chained_irq(unsigned int irq,
> struct irq_desc *desc)
> int i, id;
>
> chained_irq_enter(chip, desc);
> -
> + trace_spmi_pmic_arb_aggregate_irq_start(irq, pa->min_apid,
> + pa->max_apid);
> for (i = first; i <= last; ++i) {
> status = readl_relaxed(intr +
> SPMI_PIC_OWNER_ACC_STATUS(pa->ee, i));
> diff --git a/include/trace/events/spmi-pmic-arb.h
> b/include/trace/events/spmi-pmic-arb.h
> new file mode 100644
> index 0000000..c7fd402
> --- /dev/null
> +++ b/include/trace/events/spmi-pmic-arb.h
> @@ -0,0 +1,62 @@
> +#undef TRACE_SYSTEM
> +#define TRACE_SYSTEM spmi-pmic-arb
> +
> +#if !defined(_TRACE_SPMI_PMIC_ARB_H) || defined(TRACE_HEADER_MULTI_READ)
> +#define _TRACE_SPMI_PMIC_ARB_H
> +
> +#include <linux/spmi.h>
> +#include <linux/tracepoint.h>
> +
> +/*
> + * drivers/spmi/spmi-pmic-arb.c
> + */
> +
> +TRACE_EVENT(spmi_pmic_arb_aggregate_irq_start,
> + TP_PROTO(unsigned int irq, u16 first, u16 last),
> + TP_ARGS(irq, first, last),
> +
> + TP_STRUCT__entry(
> + __field ( unsigned int, irq )
> + __field ( u16, first )
> + __field ( u16, last )
> + ),
> +
> + TP_fast_assign(
> + __entry->irq = irq;
> + __entry->first = first;
> + __entry->last = last;
> + ),
> +
> + TP_printk("irq=%d registered apid range=(%d,%d)",
> + (int)__entry->irq, (int)__entry->first, (int)__entry->last)
> +);
> +
> +TRACE_EVENT(spmi_pmic_arb_apid_irq_end,
> + TP_PROTO(u8 apid, unsigned int irq, u8 func_num, u16 ppid),
> + TP_ARGS(apid, irq, func_num, ppid),
> +
> + TP_STRUCT__entry(
> + __field ( u8, apid )
> + __field ( unsigned int, irq )
> + __field ( u8, func_num )
> + __field ( u8, sid )
> + __field ( u8, pid )
> + ),
> +
> + TP_fast_assign(
> + __entry->apid = apid;
> + __entry->irq = irq;
> + __entry->func_num = func_num;
> + __entry->sid = (ppid >> 8) & 0x0F;
> + __entry->pid = (ppid & 0xFF);
> + ),
> +
> + TP_printk("apid=%d irq=%d func_num=%d sid=%d pid=0x%d",
> + (int)__entry->apid, (int)__entry->irq, (int)__entry->func_num,
> + (int)__entry->sid, (int)__entry->pid)
> +);
> +
> +#endif /* _TRACE_SPMI_PMIC_ARB_H */
> +
> +/* This part must be outside protection */
> +#include <trace/define_trace.h>
> --
> 1.8.5.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm"
> in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists